Track pad not clicking

I was able to click all boxes in system preferences and it won't work.  I can move my cursor, but can't click.  I also noticed that some say it is a battery issue, but I was reluctant to open computer.  Wish battery was as easy to get to as macbook.

Hello kvieren
You would need to update your Mac’s operating system to Mac OS X 10.6 Snow Leopard according to the system requirements. I have also provided the link to purchase Mac OS X 10.6 Snow Leopard.
Magic Trackpad
http://www.apple.com/magictrackpad/
Mac OS X 10.6 Snow Leopard
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Regards,
-Norm G.

Similar Messages

  • Mac book air track pad not clicking

    The track pad on my mac book air periodically stops working (over the past couple of days it has not worked about 90% of the time.  Even if i use a mouse the clicker on the mouse does not work.  Not settings have been changed.

    Howdy bdahal17,
    Thanks for using the Apple Support Communities.
    From your post I understand that your trackpad is behaving erradically on its own.  Please review the information in the article below for assistance with this issue.
    Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
    Cheers,
    Alex H.

  • Track pad not functioning correctly

    My MacBook 5,1 is having issues with the track pad.
    Clicking on a folder to open and scrolling are fine. Even a feather like click works, so sensitivity is still functional.
    Click and drag and what Apples called secondary click to get drop down menus at different locations are both not working. So highlighting text and secondary/right clicking a misspelled work to get suggestions all don't function.
    I have tried different settings in the preferences, without a solution to this.
    I tested using a mouse for click and drag and this works, but I would preferred to use the track pad if possible.
    IS there a way to remove the preferences for the track pad from the system and then reboot or some similar solution to resolve this?
    Thank you.

    The situation is unchanged, if anyone has any idea how to resolve this issue with the track pad it would be most welcome.
    I s there any software fix or something I can do?
    Thank you

  • HT1899 Installed windows 8 through boot camp ,track pad not working

    I installed windows 8 though boot camp , track pad not working

    The update to boot camp is now available!
    Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
    After going through the usual process from boot camp, then installed windows and the support drivers... the trackpad rt click did not work. I had to then go download the boot camp again from windows 8 using the url below and ran the set up.exe from the boot camp folder you can download from below. Run it within windows 8.
    http://support.apple.com/kb/dl1638
    Boot Camp Support Software 5.0.5033
    This solved the Trackpad Right Clicking issue (not working) as well as tapping.
    The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

  • Track pad not responding to finger click

    I recently got a Macbook Air and tried using the track pad for the standard finger click options however it doesn't work/respond.
    Viewed the "how to demo" fromt eh track pad options, tried those and it is still not reponding.
    I used to have an old Macbook in which i enabled the finger click and worked fine.
    Is there a set up that I don't know about?
    Thanks for your help in advance.

    What OS are you using. Your profile shows IOS 5 but that is for an iPhone or iPad.

  • HT1338 track pad not working after upgrade to mountain lion

    I have just finished installing Mountain Lion and it apears to be ok but I have two imediate problems.  Firstly the track pad gestures are not working, I can only select anything with the click switch, single selection by finger is not working.  Secondly I have used the migrate assistant to transfer my files but I appear to have lost all my desktop shortcuts.  I have installed all the upgrades which were advised on start up.  I hope someone can help.

    For the first problem, you need to re-enable 'tap to click' in Sys Prefs:

  • Track pad wont click and drag help?

    this may not be the right place but for some reason my track pad just randomly quit working when it comes to click and drag. i updated the software because i read one correct this issue but its still happening. can anyone help? do i need to take it to a mac store?

    That is unfortunate! However, here is some international contact information:
    http://www.apple.com/support/contact/phone_contacts.html
    I see that your location is on the list. It's possible that you could contact Apple directly and be referred to an Apple Authorized Service Provider who could diagnose what is wrong.
    In the meantime, you could always make a good backup and then reinstall the OS from disc and see if this cures the problem.
    If you really feel this is software rather than hardware, it might be worth posting your question in the Snow Leopard forum where all the software experts are. It may be a simple matter of trashing a .plist or something like that.
    Good luck!

  • Track pad not sensitive enough

    My Macbook alum has been working well for the last year or two. Within the last couple months, the track pad has become increasingly less sensitive...clicking on it does not always invoke a selection as intended even when a clear click sound is heard. I find i need to click much harder than standard use to get it to respond.
    I checked the control panel and played around with the settings several times with no improvement.
    Thoughts?
    Thanks in advance!

    I had the same problem, clicking with the track pad became unbearably bad, it wasn't sensitive at all.
    I found that if you take off the bottom and remove the battery on the track pad there is a screw, its a triangle shape.
    Tightening that screw raised the trackpad (slightly, don't over do it) and by tightening that screw the trackpad's clicking came back to normal.
    Free fix, worth a shot. Don't strip the screw though...

  • Track pad not working in Windows 7

    I have a mac book pro running boot camp and windows 7. I am unable to use my track pad to scroll and right-click when using windows. I have looked at other threads and am in need of a step-by-step explanation for how to fix this problem. Has anyone run into this problem? Any help would be much appreciated.

    When you ran Bootcamp Assistant did you download the Windows Support software? Did you then install the Windows Support software from within Windows?
    If not, start Bootcamp Assistant and select the option to download the Windows Support software then follow the instructions in the Bootcamp Installation manual to install the Windows Support software.

  • Track pad and clicking problems - snow leopard

    Lots of problem with an older MacBook pro running 10.6.8, mainly with the track pad and its over sensitivty. Also no actual clicking available just tapping..
    As a separate issue the mail programme will not start at all, reduced to using "thunderbird" ..
    I have run the disk utility many times and genrally get the same list of problems/errors mainly "Open error 5" problems with .nib fls etc ..
    Any of this sound familiar and if there are any answers out there, would be much appreciated! ?

    Many thanks Linc - the battery advise was perfect !
    The Mail issue remains - just does not start ..
    The error messages occur when using Disk Utility / verify permossions etc ...the issues are listed with my Tags..
    Any suggestions gratefully recieved..

  • My track pad not working properly

    Hi Guys
    I have been reading loads of forums on trackpads not working due to updates but I only have 10.7.5.
    My track pad was working fine all day then when I get home to open computer again it starts playing up randomly selecting folders and wont click.
    I restarted my computer checked for udates now I cant click and drag but the cursor and tapping and two three fingers is fine.  Any suggestions. 
    The pad can click all the way to the bottom and if I want to use soming in the top bar I can click on it but nowhere else
    Please help

    Hello Vikas,
    It certainly can be inconvenient and frustrating when your trackpad is acting erratically.  I recommend reviewing the following article for an issue like this:
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/ts1449
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Track pad not working & cannot find server message when searching

    I tried rebooting, the track pad has worked on and off for months and now when I try to search anything on the browser it comes up with a unable to find requested server message

    Hi mugssy10,
    Welcome to the BB Community...
    I too was having some issue with my trackpad...atfirst it was not a permanent issue(at times trackpad was working and at times not), but later the trackpad tollay stopped working...i got it replaced by the BB service center...
    So, i wud suggest u to visit a BB service center and get it clarified...do take backup of ur BB before going to a service center coz they will reinstall ur OS too after replacing the trackpad...
    with regards
    simply abhik...
    Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
    For BB OS update: http://us.blackberry.com/software/smartphones/update.html
    BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

  • Track pad not working, pages unstable, how do I fix this?

    How do I fix my track pad which does not control my mouse?  I plugged in a mouse via USB port but the pages are unstable.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Track pad not responding correctly, what to do?

    The track pad is not responding as it should, arrow moves on its own at times and when clicked it does not respond or click where it should. Have tried restarting it and it will work fine for a min or so then go back to being inaccurate.

    What OS are you using. Your profile shows IOS 5 but that is for an iPhone or iPad.

  • Bamboo Track Pad not working properly

    My Bamboo track pad is not working properly.  Plugged it in into my macbook pro via USB like usual today and for some reason when I try to use it and begin using the pen tool in illustrator my pointer only stays in the top left corner of my screen and wont move with my pen.  This is the first time I have had this problem with my Bamboo track pad.  Not sure why it is doing this.  My MBP recognizes the track pad but for some reason it just won't work properly.  Not sure if I need to reinstall the driver or what?  Any help would be grateful, thanks.

    Ralph, thanks for the quick reply.  All of the Trackpad preference boxes are checked for "Point & Click" except "Three finger drag."  Once "Three finger drag" is checked, this action spawns a simultaneous action in the Trackpad "More Gestures" area that changes the gesture for Mission Control from "three finger swipe up" to "four finger swipe up."
    Since I am having this problem on an early 2009 iMac, I decided to check-out my 2013 MBPr for the same behavior.  Amazingly, all was working well with the built-in trackpad functionality regarding the "double-tap select and drag" until i checked and then un-checked the "Three finger drag" box (in Trackpad preference > point & click).  Now my "double-tap select and drag" is BROKEN on my 2013 MBPR.

Maybe you are looking for

  • External SATA RAID no longer works after 10.5.5 update

    After updating to 10.5.5, my external RAID (Sbox) (RAID 10) is no longer recognized – The SATA card is functioning correctly – I can attach a single external SATA drive without problem – all ROM has been updated (working with Sonnet) and we confirmed

  • Upgrade G3 B&W and G4 733 single processor from OS 9.2.1 to OS 10.4 Tiger

    Back in August I asked several questions concerning the above, and a person named LIMNOS gave me some great info. Since both of my computers have only CD drives, he stated that I would need an external (firewire) DVD drive to do the installation. Am

  • Photoshop CC 2014: lost advance tab in menu Archive file info

    Hi to all. Recently I install Photoshop CC 2014, and I can't find the advance tab in the window "File Info" inside the Archive Menu, when I choose it. did we lost this tab in CC2014? Can I find this "advance" tab in other menu into Photoshop CC 2014?

  • Tabset in page fragment , the url does not changes when we select tabs...

    Hi Thank you for reading my post. i noticed that when we use a tabSet in a page fragment , selecting tabs does not change the current URL , is it a correct manner ? I think when we select a tab and it opens another page the url should change.

  • Downloading a Pentax Optio 50 camera

    I'm trying to download from a Pentax Optio 50 camera via usb. When the camera is connected and switched on it is not automatically detected and a message 'data being processed' is displayed. The camera then switches off after approximately 5 seconds.