Track Skipping Issue/Queue Issue

I recently upgraded my iPhone 6 to iOS 8.4. Seemingly at random my Spotify will decide to not follow an album or an artists track listing. For example. Say I'm listening to Pink Floyd's The Wall and I'm just viewing the album. I am listening to the song "In the Flesh?" the next song should be "The Thin Ice" but sometimes my phone decides it will play a completely different song from the album like "Mother." This is not specific to playing through an album or an entire artist. I will also have an issue where if I select a song on the album that is not at the beginning of the album will skip back to the beginning of the album instead of to the next track. The other problem with this is sometimes a track will get stuck as the only track in the queue despite not having made any queue selections.
The only way I have been able to repeat this issue is if I go into an app that requires the mic (e.g., snapchat, camera) and Spotify does a forced pause or if I pause the track and then go into one of those apps.
I hope I am explaning this as clearly as possible. Hope I can get some help. This isn't an app-breaking issue, just a nuisance.

If you have not already done so, take a look at these articles. Please also look at links within the articles that may lead to more info.
Troubleshooting songs that skip on iPod
iPod does not play content purchased from the iTunes Store
Sorry if you have done all of the things shown. Since I do not work for Apple I can't begin to explain why you don't have a "simple fix". I can only assume that since technology is man-made then perfection does not and never will exist. It may be frustrating to deal with the glitches and problems that spring up but that's the way things go. Consider the fact that it wasn't that long ago when these little toys of ours didn't exist and we had to spend life excited with Walkman's (take it back old school...pre-CD walkman! lol).
On a more serious note...consider the possibility that the issue may not be the iPod itself but iTunes and the way it causes things to occur on the iPod. Another guess on my part...but it's a well known fact that a LOT of problems seemed to crop up with the introduction of iTunes 7 prior to the release of the 2nd gen nano. I've been a lucky one so far and not had most of the issues others have posted about on here. I am by no means a diehard Apple customer...iPods are the beginning and end of my consumer experience with the company. All I do is assume that if and when there is a problem the company will work at providing a solution that works...even though it may take a lot longer than I would like.
But I digress. Hope things work out for you.

Similar Messages

  • Looking for an app that allows our business to track where our company issued Iphone4S's are at all times.  Ideas?

    We are looking for an app that allows our business to track where our company issued IPhone4S's are at all times.  Any ideas?

    Requires each device/user have an unique Apple ID(verifiable email address):
    http://itunes.apple.com/us/app/find-my-friends/id466122094?mt=8
    Otherwise you can use Find My Phone, but requires logging in for each separate user. Find My Friends(built by Apple) will show everyone's location on one device.

  • Exchange Queue issues

    Hi
    we have 2 Exchange 2010 servers out of which one has a Mail Queue issue.
    whenever we view queue viewer through console or through shell with Get-queue, we get error like "Exchange can't connect to the mail queue check the transport service is started"
    If i refresh couple of times, it shows the queue on both. This happens frequently.
    I recreated a new Mail queue but still same error.
    During this error, the Transport service never stops and it shows as Started always. We have restarted this service and restarted the server twice. No improvement.
    was there anything to be checked?
    regards Sundaresan.C

    Hi sun,
    Thank you for your question.
    Which roles has been installed on 2 Exchange server?
    If CAS and Hub are not on same server:
    Make sure CAS server connect to Hub without any network issue, we could check if there are any IP data packet which are missing between CAS and Hub.
    Make sure the transport service are running when we get error on CAS and Hub.
    Check if CAS and Hub are same version(include CU)
    If CAS and Hub are the same server, we could check event log when we get error when we run the command. You could send the relevant log to
    [email protected] for our troubleshooting.
    We could try to rename the queue folder to check if the issue persist.
    If there are any questions regarding this issue, please be free to let me know.
    Best Regard,
    Jim

  • Hp 3915. vista 32 "print queue issue" and i have to clear print queue and redo print.

    hp 3915.  vista 32 "print queue issue" and i have to clear print queue and redo print.  I think it may be a driver issue. Is there a driver for 3915 using Vista. Mine says only 2000 and XP. Thanks.

    Hi there ken4863,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • URGENT BIG PROBLEM:during import track st. in queue simply does not disap

    I have problem when importing transport request on production(the transport domain controler is on development system) . The track status in queue simply does not disappear.
    I tried(based on what I have seen on an other thread) to delete the transport in import monitor and tp on OS level on productive and development system
    Then I deleted entries in TRBAT&TRJOB tables. The TPSTAT is empty.
    The problem persists.
    What would you suggest . The go live depends on this problem

    Hi,
    /usr/sap/trans/buffer might still contain entries, be careful do not modify anything here.
    Check the link
    http://help.sap.com/saphelp_47x200/helpdata/en/3d/ad5b5a4ebc11d182bf0000e829fbfe/frameset.htm
    Check the 'Cleaning up the transport directory' and 'Synchronizing the Buffers' links within the above link.
    Please do not use subjects like : URGENT BIG PROBLEM.. it is against the rules of this forum.
    Regards,
    Siddhesh

  • Mouse Tracking Skips With Matrox DualHead2Go

    Hey guys!
    JUST got a brand spankin' new MacBook Pro. Fully loaded. i7, 8gb RAM, the works.
    Yesterday I hooked it up to a brand new Matrox DualHead2Go and two Dell U2410 Displays. Worked like a dream. It's kind of annoying that the MBP sees the two displays as one because everything pops up in the center (middle of the two) by default, but I'll get over that. (unless you have a solution)
    The real problem is my mouse tracking. I've tried it with my Magic Mouse, and with the trackpad, and with both, the tracking skips. I'll move the cursor in a circle and it'll skip ahead and sometimes move erratically. As soon as I unplug the displays, the tracking is perfect again. The weird thing is that yesterday it was working perfectly fine. I've tried rebooting with then plugged in, plugging them in after boot, unplugging and then plugging in while booted.
    I can't for the life of me figure out what's wrong and it's driving me nuts. Any help is super greatly appreciated.

    So, after posting I tested by popping into Safe Mode and opening iTunes. When in safe mode, it doesn't act erratically, it works fine.
    I called Apple and they said you're not supposed to use two external displays with a MBP (figured). But he was very helpful. He directed me to call Matrox and see what's up on their end and get back to him. If Matrox can't find a fix he said he'd forward on to iTunes engineers.
    Meanwhile, though, I also saved the processes that were running in Safe Mode and compared to the processes that run when I boot into my login. There were quite a few differences on both sides. Safe had some things that werent running in my boot and vice versa. I killed everythign but background processes for 1Password and Little Snitch. Those two just pop back open after killing the process. Everything else running was Apple signed, yet the cursor was still acting erratically with nothing but iTunes open.
    I have a feeling it's on Matrox's end, but if that's the case why is iTunes the only culprit?
    Thanks again for your help!
    M!

  • [Android][Music] Track skipping issue

    LAest update for Android has changed the skipping method in the notifications drop down thing. now, back skip takes u back a track. I preferred it whe it restarted the current track.(Now, i have to skip forward then skip back just to replay the track i was already on My suggestion is a settings option so that the ppl that preferred the old method can switch back to it.

    Hey there.
    I've moved your topic over here in the help section.
    I've just tried reproducing the issue but when I press the back button on the notification widget it goes to the start of the current song.
    Could you tell us a bit more:
    - Which Spotify version are you running?
    - Which Android version?
    Thanks.

  • How to track the sql commands issued against database

    Hello, We are using an interface developed by oracle forms. Its giving some error while pressing an icon. I can not able to trace out from where it arises. This error is displayed by form developed by oracle forms. I dont have source code to track it. I would like to know , which SQL statement rises the error, so that I can update the oracle object and can able to solve the problem if I can able to find the exect SQL statment issued before the error was displayed. kindly help me . thanks.

    habfat wrote:
    Hello, We are using an interface developed by oracle forms. Its giving some error while pressing an icon. I can not able to trace out from where it arises. This error is displayed by form developed by oracle forms. I dont have source code to track it. I would like to know , which SQL statement rises the error, so that I can update the oracle object and can able to solve the problem if I can able to find the exect SQL statment issued before the error was displayed. kindly help me . thanks.Hmm, well kind of a silly but still, if you don't have source code of the form( you said so) so even if you would come to know what statement is raising the error, how would you go and edit it ? Did I miss some thing? And you asked for a sql statement ? How did you come to know that its a sql statement that is causing the error? And if that's actually a sql statement error, isn't it associated with a meaningful message ?
    Find the developer who coded the application, he would be the best person to track the error and tell you its resolution IMO.
    HTH
    Aman....

  • "skip when shuffling" issue

    I'm wondering about the new "skip when shuffling" option in iTunes 5... does this apply only to when shuffling songs in iTunes, or is it supposed to work when shuffling songs on my iPod? Because it's not.
    I've ticked this option for all of my classical songs, but they still turn up now and again when I'm shuffling songs on my iPod.
    Is this because
    a. This option only applies to shuffled songs playing in iTunes, and not on the iPod
    b. This option will only work on the iPod software currently running on the
    Nano, and will start to work when Apple release this version for all iPods.
    c. It's broke.
    My iPod is a 60Gb colour, running 1.2 software included in the June update. Anybody having similar problems, or know the answer?
    Thanks,
    - c -

    OK... so I did some testing - I apparently have waaaaay too much time on my hands - and it seems that checking the "skip when shuffling" option for a song in the iTunes library does not flag the song as needing to be updated on the iPod.
    I changed the genre for all of the songs I'd checked the "skip when shuffling" option for - so iTunes was forced into updating them on my iPod - and now these songs don't seem to appear when shuffling on the iPod.
    Am I alone in having this issue?
    - c -

  • RE:queue issue

    Hi all
    i have an issue recently
    They are Some  standard demos that have worked in DED/DEA for years.  Iu2019m not sure what could have changed to affect this
    every message is struck in the queue .
    A restart may not fix the issue, it looks like the XI cache cannot be refreshed.  If you drill into the errors in the queue (transaction SMQ2), all of the issues point to the cache refresh issue. 
    If you try to run a cache refresh (transaction SXI_CACHE), you get the following message:
    Problem during cache refresh.
    Problem while updating a receiver agreement with object ID 79F6783DF67A3340BCD2DB8A0811B101. :Destination 4041CDC2F23A3B858D1D941B1124CCA7; HTTP error: Could not generate information for HTTP destination from specified SOAP data
    When i used txn smq2.  Drilling through some of these, I found the following in Msg ID .......
    - <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:AdditionalText>No RFC authorization for user XIAPPLUSER.</SAP:AdditionalText>
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
    Are some more auth needed for the RFC connection user?
    now the issue is solved but
    1. What could have caused this issue ?
    2. Is the issue permanently fixed ?
    waiting for your valuable feedback
    regards
    sravan

    Hi Sravan,
    > now the issue is solved but
    > 1. What could have caused this issue ?
    If we have done changes then some times cache doesn't refresh automatically, at this time manually we have to do cache refresh. If some changes happened (RFC dest change....) then at this time if we stop and start the respective communication channel in PI then we can resolve that issue.
    > 2. Is the issue permanently fixed ?
    According to me there is no permanent solution.
    Regards,
    Venkata Ramesh

  • UCCX Position in Queue issues after RNA

    Hello, we have a script using postion in queue logic. I tested the script and everything looked well however, this past month we have had complaints that callers were moving positions. They would go from 5 to 15 to 6. This is random and does not always happen. We get a couple of complaints a day. I noticed this first hand when my co-worker called in. Call came into the trigger happend to go RNA on an agent phone...went back to the queue then was stuck in the queue for over an hour and half. I never saw the call in the supervisors software.
    Contacted TAC and they say that its an issue with the logic in the script.
    I've attached two images of the queue section of the script. We have it play a begining queue prompt (you are) then the position prompt (first) end queue promt (in line for your call to be answered.
    Any suggestions we would be grateful...
    UCCX
    System version: 8.5.1.11003-32
    Thanks....          

    For starters, if the transfer into VM fails, the user will have been dequeued, you wouldn't see them in Supervisor Desktop, and they would continue to loop around and receive queue treatment.
    I would always recommend scripting for these types of contingencies.  I.e., If VM is down or all ports are busy, don't dequeue the caller and keep them queued.
    This is also achievable without losing the caller's PIQ because you do not need to dequeue manually, a sucessful Redirect will dequeue automatically.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • FS Cache Ref queue issue

    I have an issue with object.wait and reference queue lock issue. The web logic server thread hung up and indicate "local Variable unavailable". From thread dump, it appears it is waiting for a cache reference queue lock. Any one can give some direction how to further debug on the case. Here is the exception of the dump thread:
    Full thread dump Java HotSpot(TM) Server VM (1.5.0_04-b05 mixed mode):
    "FSCacheRefQueueThread" daemon prio=2 tid=0x2c848738 nid=0x16c4 in Object.wait() [0x3016f000..0x3016fd9
    at java.lang.Object.wait(Native Method)
    - waiting on <0x09a6c8d0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
    - locked <0x09a6c8d0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
    at workshop.util.filesystem.FSCache$FSCacheRefQueueThread.run(FSCache.java:65)
    "AgentConfigMonitor" daemon prio=2 tid=0x2c658800 nid=0x13c0 waiting on condition [0x3012f000..0x3012fa
    at java.lang.Thread.sleep(Native Method)
    at com.sun.identity.agents.arch.AgentConfiguration$ConfigurationMonitor.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:595)
    "LDAPConnThread-6 ldap://devldap.usarec.army.mil:389" daemon prio=5 tid=0x2c5d53e8 nid=0x123c runnable
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
    - locked <0x09cb2878> (a java.io.BufferedInputStream)
    at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
    at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
    at java.lang.Thread.run(Thread.java:595)
    "LDAPConnThread-5 ldap://devldap.usarec.army.mil:389" daemon prio=5 tid=0x2d4471d8 nid=0x13f0 runnable
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
    - locked <0x09cb4958> (a java.io.BufferedInputStream)
    at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
    at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:538)
    at java.lang.Thread.run(Thread.java:595)
    "Thread-19" daemon prio=5 tid=0x2c381b70 nid=0x173c waiting on condition [0x3002f000..0x3002fd18]
    at java.lang.Thread.sleep(Native Method)
    It is web logic 9.2.
    Any work around? Is that a dead lock?
    Thanks!

    The root cause seems to be caused by
    workshop.util.filesystem.FSCache$FSCacheRefQueueThread.
    Are you running this application from within WebLogic Workshop?
    Can you see if you can deploy externally to workshop?

  • Queue issue

    Hello,
    Does anyone have idea about below issue:
    We are handling high volume of messages, our queues get blocked in smq2 and then we have to either delete queues and re-register or bounce the server back. All optimizations on mapping side (splitting messages) etc are done.
    could someone tell how to solve this issue of not getting blocked queues : We have done parallelism of queues also. Is there any parameters on admin side or on AAE whichg can be tuned? We have PI 7.1.
    Thnx

    Hi Ram,,
       If you are handling high volume messages ,you should follow some good design approcahes.
    My advice to you implement message packaging for you scenarios,you can select the option message packaging based on message size or time or number of messages.
    this is the one way to handle high volume messages in PI7.1,i had implemented the same for my client.
    Regards,
    Raj

  • UseOneAsMany function: Queues Issues

    Hi experts,
    I'm facing an issue while trying to use the function useOneAsMany
    In my requirement i have to map in different cases a header value as many times per each item it has,
    1- mapping the document number (header value) in every item position of the item level in the target
    2- In the same way, i have to do the same with different segments (Mapping the item number within each segment of the price conditions item)
    I have to do it like that because the structure of the Idoc has those values always separated, having ITEM data, but at lower levels has the condition types, texts, and so on, so i have to do that link with the corresponding item number
    I don't have problems using the function, but the issue is that the mapping fails when any of it's parameter is missing
    - For example:
    I'm mapping the item number per each ID of the TEXT segment, so i can present it like this:
    ITEM NUMBER/TEXT ID/TEXT DESCRIPTION/TEXT LANGUAGE..
    First position is correct but in the second one the TEXT Segment is not coming so the function fails stating the queues have to have of the same size, (TEXT ID is "SUPPRESS")
    - How could i solve this issue?
    The map fails even if that segment is not supposed to be generated (i'm generating the segment per TEXT segment in the source)! so i guess the function compile anyway? or maybe is because the function is executed only once but the queues are not correct
    So i see that the function is really useful but if an empty values appears it raises an error
    I
    Any ideas?
    Thanks!

    Thanks for the quick responses
    I've tried using Mapwithdefault with no results,
    the structure is an CRM IDoc: CRMXIF_ORDER_SAVE_U03
    the structure is a bit complicated, having a header segment E101CRMXIF_BUSTRANS (1 structure) and within it, the different segments (PARTNERS, SALES DATA, PRICING CONDITIONS, SHIPPING DATA, etc 1.1, 1.2, 1.3 and so on)
    and a item level  E101CRMXIF_BUSTRANS_ITEM with the same segments as header value, which means that items also have partners data, sales data, pricing.. etc
    So i only have the item number at the first segment and i'm required to link in my source structure so every segment created has the corresponding item position (as explained above, 1 item can have many partners, pricing conditions, etc)
    That's why i'm using useOneAsMany, which works perfectly unless there's any missing data
    For example, of 2 items, one has price conditions the other not, that causes that the queues logic fails
    Maybe i'll have to do a workaround, but i'm surprised to find this issue because it means it won't work well if some data is not avaliable (is not mandatory to have pricing condition per each item)
    I'll check that blog, although any help would be great!
    Thanks!

  • Cisco EIM-mail queue issue

    hi,
    I am facing an problem in cisco Email interaction manager. I have installed EIM/WIM 4.3.1 in single server and integrated with ICM 8.5.
    Its working well as mails are queued in the queue created in ICM (MRD). but if agents are not available the mail is not queued in ICM queue its queued in the default queue in CIM, we can only pick it from that queue if the agent having admin rights that we cant give to all agent. somebody tell the solution for this issues.....
    I am facing an problem in cisco Email interaction manager. I have installed EIM/WIM 4.3.1 in single server and integrated with ICM 8.5.
    Its working well as mails are queued in the queue created in ICM (MRD). but if agents are not available the mail is not queued in ICM queue its queued in the dlt queue in CIM, we can only pick it from that queue if the agent having admin rights that we cant give to all agent. somebody tell the solution for this issues.....
    Posted by WebUser Rajesh Kumar P

    Yav,
    Go to the Administration Console in EIM, then Departments. Inside the Department, there will be an Email folder, and inside that is Aliases. In the properties for each Alias, there is an "Email address" field.
    -Jameson

Maybe you are looking for