Track stops recording after about an hour

Hi Everyone,
I am trying to record from some old tapes in order to create mp3s. The track stops recording after about one hour. The Tape is over one hour long. I read about a similiar problem in the forum and tried dragging the purple timeline marker to the right but it won't move any further. What is this called and what does it do? I also read about changing the sampling rate, but I cannot find where to do this. Where do I find documentation on this?
Many Thanks for any suggestions.
Regards,
Bill

Garageband 3 doesn't record more than 1999 beats (GB2: 999). Since in your case the beats don´t matter, you can lower the tempo to the minimum (40 bpm) to get a maximum recording time of 3:18:48.
As for the sample rate: You can't change the export sample rate of GB, it's always 16 bit, 44.1 kbit/s (internally GB works with a higher resolution).

Similar Messages

  • After upgrading to 10.8.3 my Apple USB keyboard stops working after about 3 hours

    Mac Pro 3,1
    OS X 10.8.3 Server
    32GB RAM
    Apple USB Keyboard works fine after reboot (typing on it now), stops responding after about 3 hours.
    I see nothing in Console that looks like the culprit. Here is everything around the last time it happened - between 11:28 and 11:30 they keyboard just stopped working. Unplugging and re-plugging doesn't bring it back. Changing USB ports doesn't bring it back. Rebooting is the only thing that seems to work. Bluetooth keyboard works before and after.
    3/25/13 11:28:08.503 AM mdworker[4631]: Unable to talk to lsboxd
    3/25/13 11:30:00.962 AM CalendarAgent[768]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7fb609cb7730 {NSUnderlyingError=0x7fb60f2d0ed0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://[email protected]/principals/__uids__/A8612C91-669B-4A4B-88 04-2AA518E4842B/, NSErrorFailingURLKey=https://[email protected]/principals/__uids__/A8612C91-669B-4A4B-88 04-2AA518E4842B/, AccountName=lovemac7.brumstead.private, CalDAVErrFromRefresh=YES, NSLocalizedDescription=A server with the specified hostname could not be found.}]
    Anyone else seeing anything like this?
    Everything worked fine in 10.8.2.

    Hey Doug,
    Thanks for your post, and welcome to the Apple Support Communities.
    I understand that your keyboard backlight is not working upon startup, the following may resolve your issue:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
    Lights
    The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
    You may also want to reset your computer's PRAM:
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/PH11243
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Thanks,
    Matt M.

  • Canon Rebel T5i automatically stops recording after about 6 seconds. How can I disable or fix this?

    I just got a Canon Rebel T5i and I was testing out the video and several times it will automatically stop recording after about 6 seconds. How can I fix or disable this?

    And while buying said faster card... buy a REPUTABLE brand from a reputable vendor.  I've come to the conclusion that there are a lot of fly-by-nights making cards that are not as fast as they claim to be.
    Reputable vendors are companies like Sandisk and Lexar.  But as an SD card is just a plastic card with a sticker on it, and stickers are pretty easy to fake, buy the card from a vendor you can trust is not selling fakes. 
    This is one item where it is probably not a good idea to try to save money by finding the cheapest deal you can find on the Internet.
    Tim Campbell
    5D II, 5D III, 60Da

  • When recording a slideshow, why does audio stop recording after about 30 seconds even though slides and presentation continues?

    I'm doing everything the same and have made many successful slideshow recordings using Keynote, but since updating the Yosemite and then updating Keynote the audio just stops recording after about 30 seconds.
    The slides keep on changing and recording the video, but after 30 seconds the audio stops recording even though it seems to be registering the sound and the mic is not muted in Keynote.
    Is there some change or new setting I am not aware of that needs to be altered?
    Any advice would be helpful as I need to record a lot of presentations.
    OS X Yosemite version 10.10
    Keynote version 6.5
    MacBook Pro (Retina, 15-inch, Late 2013)
    2.6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    Intel Iris Pro 1536 MB

    I can't imagine this will work as the the application is tied into a specific computer and user ID to prevent unauthorised use of single use applications. Copying over has not worked with previous versions of Keynote.
    It worked for me. I guess it could be because we bought our Macs together and have home sharing or something. Either way, I'm running Yosemite but with Keynote 6.2.2. and not updating again until Apple do something about this bug.

  • My canon t3i dslr camera automatically stops recording after about 10 sec. using a class 10 card.

    Hello,
    My canon t3i dslr camera stops recording automatically after about 10 sec. the manual said to use an SD card of class 6 or higher. I am using a class 10 and I have been able to record long videos in the past and all of a sudden the camera stops recording automatically after about 10 sec. Does anyone know why?  thanks

    Hi Rockinruby.
    We get this a lot here.  It turns out that even though the card is labeled as a Class 10 card, the most common problem when this occurs... is that it's still a defective card.
    Sandisk is a good company and they generally make solid products.  But there are two risks... (1) even Sandisk will occasionally have a bad card or a card that fails prematurely, and (2) it's exceptionally easy to create a forgery (if you peel the labels off these cards, they all look identical.)  
    When I buy cards (and I also buy Sandisk and/or Lexar cards), I'm careful to buy cards which well-exceed the specs necessary ... but I'm also careful to buy the cards only from reputable dealers.
    If you do a search, you'll find LOTS of articles about fake cards with tips on how to avoid them or how to spot them.
    But the bottom line ... at the end of the day you just want your problem solved.  If the card is bad, then there's nothing that you  would be able to do to the camera to make the problem away.  You would really need to replace that card.
    The issue that you are having is somewhat common... there are lots of threads on this.  But the majority of these are actually solved simply by replacing the card with a known good card and without making any changes to the camera.  
    It's not a guarantee that it's the card... but it's the most common cause.
    Tim Campbell
    5D II, 5D III, 60Da

  • IPod will stop syncing after about an hour and then can't write to iPod

    I recently added several thousand songs to my iTunes. But my ipod will not sync all the songs. After about a thousand songs, it will come up with an error message saying that it can't write to the ipod. If I try to reconnect, the ipod does not show up in itunes and then it asks me to format the ipod again.
    If i restore the ipod using the ipod updater 2006-01-10, I can get it to sync up again but it will come up with the same error message again after about a thousand songs but never in the same place.
    I've tried following the troubleshooting techniques on the ipod support site for the ipod not showing up in the itunes window. But the ipod will show up in the itunes window immediately after I restore the ipod so I don't think that this is the problem. It's after the error message and when I try to reconnect it to the computer that it does not show up.
    Any suggestions?

    Try unsyncing and resyncing all of your music.  To do this, remove the tick mark next to Sync Music from under the iPod's Music tab and click Apply in the lower right hand corner. This will remove all tracks from the iPod. When it has finished, re-apply the check mark and again apply the changes to resync all music back over to the device. Make sure that Sync Entire library is still selected and that Sync only checked songs and videos is NOT selected.
    Any luck there?
    Where are you getting the total number of songs at on both iTunes and your iPod Touch?
    B-rock

  • I tried to update twice and after about 1 hour in step 1 "preparing" it stops and says didn't update. No error messages.

    I've tried to update AppleTV twice. After about 1 hour in step 1 "preparing for update" it stops and says didn't update. Everything works fine except itis not updated. Any tips on what to do?

    Just what do you not understand?
    Did you try:
    Try to restore from another known-good computer and network.
    Error 3014
    This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I receive emails from an exchange account and from Yahoo the exchange acoount emails stay on my ipad ok but the BTyahoo ones disapear after about 1 hour. Can someone advise on how to stop yhis happening.

    I am having problems with my ipad. I receive emails from 2 seperate accounts one exchange account and the other from BTyahoo.
    The exchange account emails stay on the ipad but the btyahoo ones disapear after about 1 hour can anyone help.

    To follow-up with this issue:
    I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
    I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
    I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
    Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
    Ian

  • Why does my music pause after about an hour

    Hi all. I am having trouble with my 7th gen ipod nano. After about an hour or so of listening to music, the device will pause on its on. I have to fully charge it again to solve the issue. If I do not fully charge it, I have to press and hold the ear buds into the jack to fix the problem. Oh and I am not using the original head phones. There seems to be a shortage of some sort. Please help.

    Hey Shamika,
    If you are having an issue with your iPod nano stopping play of music after one hour and being unable to resume normally, I would suggest that you first attemtp to reset the iPod. See this article for directions -
    Reset your iPod - Apple Support
    Specifically -
    7th generation: Press and hold both the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    If the issue is not resolved, you may need to restore your iPod to factory settings. Use the steps in this article -
    Restoring iPod to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

    I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

    Hello there, LynnS.
    The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
    OS X Mavericks: Erase and reinstall OS X
    http://support.apple.com/kb/PH14243
    Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
    OS X Mavericks: Recover your entire system
    http://support.apple.com/kb/PH14185
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Itunes stops working after say half hour of use and will not play next song, the only way to get it working again is to close and reopen, then it works fine till next time, but the problem keeps returning

    itunes stops working after say half hour of use and will not play next song, I have to close and reopen, it works fine till next time, it keeps happening on a regular basis, HP pavilion laptop, g6 series,
    Window 7 64 bit

    Hello davewood26,
    The following article provides steps that can help get iTunes stabilized.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • TS3276 My iPad autmatically deletes all incoming emails after about four hours. They are not in the trash. Help, please!

    My iPad automatically deletes emails after about four hours. They aren't in the trash. Help please!

    See picture:
    http://i1224.photobucket.com/albums/ee374/Diavonex/7a47f8614ce19eb760a2fcbae7f6f 749_zps1900a350.jpg

  • My iPad2 screen stops responding after about 5 mins, can this be fixed?

    My iPad2 screen stops responding after about 5 mins, can this be fixed?

    Have you tried to give it a reboot? Hold down the sleep and home keys for about 20 seconds. WHen you see the silver apple, let go and let it reboot and see if that helps.

  • I unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!

    i unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!..+ when i charge my iphone, i dont see the lightning bolt,instead, i see a plug icon...i know this means th@ battery is full, but my battery is no where near full!!!!!

    Just a quick update with a couple more details before I go to work:
    I left my phone plugged into the wall charger all night long but the Apple logo is still blinking on and off. However, when unplugged from the charger, the screen goes blank and the unit does not respond to pressing/holding the buttons at all. Likewise, flipping the mute switch does not cause the phone to vibrate as it normally would, which made me wonder if power was being disrupted somewhere else in the unit before the battery. I just finished disassembling the unit down to the battery, looked for any loose connections etc., and did spot a suspicious looking spot on top of the #5 ribbon connector that I had not taken notice of before in my first disassembly. I'll take a picture of it and post a link for your consideration later on today when I have a spare moment, although I fear the worst.

  • After about an hour, FaceTime sound becomes extremelydistorted

    My sister and I use FaceTime for long chats once a week.  After about an hour the sound suddenly becomes extremely distorted and unusable.  At that point we have to switch to Google Chat.  We prefer FaceTime--any idea what is causing this to happen and how to avoid it?  It occurs without warning.  I am on a Macbook Pro and she is on a Mac Book.

    Just had this reply from Etymotic:
    "It sound like a clogged filter. That sounds like an easy fix. Have you changed the filters? They will not appear to be clogged or dirty. he filters are designed to protect the transducers from wax and moisture. How often they need to be changed will depend on how much you use them and the amount of wax and moisture your ear produces. This varies considerably from one person to another. There are people that change their filters monthly and others that only need to change them annually. You will know it is time to change the filter when the volume of the sound is reduced, sound quality is reduced, or distortion is present. Sometimes if a filter gets completely clogged, the earphone can go dead very suddenly. You may want to have filters on hand to be prepared."
    I've now changed the filters and will test the phones and iPod this weekend to see it the problem's been fixed!

Maybe you are looking for

  • New DVR Scheduler Bugs: Priority Settings No Longer Working, Scrolling Series Schedules is Flakey

    Hi, After this last HD DVR update, I have two new problems: 1) I can no longer set the priority of most of my series schedules. I have about 100 series schedule entries, which the DVR update probably wasn't tested for. Now when I try to set a series

  • Jabber for Windows Call popup photo

    We have a Jabber for windows deployment currently running in our lab environment. In the buddy list we have the contacts with their photo. When we start a call or receive a call a call popup screen appears. In this screen the photo of the called pers

  • Best filesystem for external hard drive?

    I just bought a Maxtor Basics 1 TB external hard drive. I think the current filesystem it is using is NTFS. Should I stick with it, or should I reformat it to ext3( or something better?). What are the advantages and disadvantages?. Primary use is in

  • LR locked up 3 times in GRID view

    I have read about this but never experienced LAG or noticible slowing. Today while going through images in grid view LR slowed and crashed not once but 3 times. The first time, the catalog got efft up and i had to use a back up from a aweek ago and l

  • Where are the fisical records for pb60 trans?

    Hi guys, I cant find the pb table where the pb60 transaction stored the records, i know that pb4003 stores some of the data, but i still need to find where are recorded the begda and endda for each operation. any help is more than welcome.