Track Time during a Quiz?

I am unfortunately up against a tight deadline for this
project and thus have to use our current mechanism (Breeze
Training) to do it....
I am putting together a certification exam that needs to be
available online. I'm well aware of the security/cheating
opportunities available via this type of exam but my company won't
pay for a testing center to ensure integrity. So....here's the
deal:
- 50 questions, mostly multiple choice but perhaps if I can
get the basic functionality I need working then I'll use other
types
- 60 minute time limit
I've looked into using the following methods to develop the
exam:
1. From scratch using Flash. This way won't work for me
because I am not familiar with developing AICC content with
framesets and the like.
2. Captivate 1.1....why bother when it is basically the same
as Breeze Presenter, but with an added chance for something to go
wrong with the tracking : )
3. Flash Quiz Templates - my limited testing has resulted in
only a pass/fail being tracked per user. No tracking of the
individual questions seems to be working on Breeze wih this
template (yes, I followed the whitepaper on it).
4. Breeze Presenter/PPT...as much as I hate to develop a
large quiz this way, it seems to be the only way at this point
under the timeframe I'm working within. Unfortunately though I need
to display the elapsed time on the user's screen while they take
the test.
So I'm not sure how to go about this. I will try to see if I
can just create instance variables/properties at a global level if
I have to and then just calculate off of those by placing a timer
swf on each slide, but I'm not sure if that will work and it seems
like a hackjob way of doing things even if it did. Any
thoughts/advice is greatly appreciated.

Because I'm only used to the LMS, deployed in our college, which is based on Blackboard (not free), I find it difficult to recommend a LMS for use with CP. CP is SCORM-compliant with SCORM 1.2 and SCORM 2004, so anyhow this could be a reference. In these forums you will find discussions on different LMS's such as Moodle. Sorry, but I'm not that LMS-wise to advise you in this domain.
Lilybiri

Similar Messages

  • Is it Possible to Insert Quiz Slides at Set Times During a Video?

    Hi all,
    I'm fairly new to Captivate, so I apologise in advance if this question has already been answered and I couldn't find it.
    I work in higher education and we create a lot of screencasts with academics speaking over Powerpoint presentations. During a presentation there is often several points where the academic would like to ask the user a question. What I want to know is if there's a way of adding question slides during a video?
    Many thanks,
    Ross

    You will have to split up that video to be able to insert slides in between.
    2015-04-23 16:42 GMT+02:00 Ross_P <[email protected]>:
        Is it Possible to Insert Quiz Slides at Set Times During a Video?
    created by Ross_P <https://forums.adobe.com/people/Ross_P> in *Adobe
    Captivate* - View the full discussion
    <https://forums.adobe.com/message/7470510#7470510>

  • When watching a movie purchased through I tunes it shuts out several times during play?

    When watching a movie purchased through I tunes it shuts off several times during play?

    Hello Boris73
    Try deleting the tracks from your iTunes library and then downloading them again to test the playback. If it continues, then report the issue to the iTunes Store.
    Download past purchases
    http://support.apple.com/kb/ht2519
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • I am using an iPad with Apple TV and airplay with a projector in my classroom.  The mirroring cuts out and back on several times during use. Any suggestions on what's causing it and how to fix it?

    I am using My iPad with Apple TV, Airplay and projector in my classroom.  The projector screens blanks out and back on several times during a presentation. It seems like a problem with connection but I'm not sure as it comes back on after a few seconds. Any idea of what is causing this and how it can fixed?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • I have an iPhone 4S, iPad and MacBook Air.  I'm looking for an app or program where I can track time spent of specific projects each day and also document details of each project.  Is there anything available that is synced through iCloud?

    I have an iPhone 4S, iPad and MacBook Air.  I'm looking for a program or app that I can sync though iCloud that will allow me to us all of these devices to track time spent on projects each day along with the ability to add specific information about each project.  Any suggestions are appreciated! Thanks!

    I recommend you consider Omnifocus.  It is a task management program which runs on the Mac, Iphone & Ipad. I use it for task management and project management.  It let's you store additional information as well.   I sync all three devices through a Mobile Me account and I can enter data on any device and it is available on all devices.  I believe you can also sync through Dropbox.  I'm not sure that you can sync through iCloud yet.  The link to their website is:  www.omnigroup.com.  There may be less expensive alternatives, but this one meets my needs and syncs very well across all devices.

  • Eth0 is being up and down for several time during boot

    My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
    My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK=""
    TIMEZONE="Asia/Hong_Kong"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MOD_AUTOLOAD="yes"
    MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="antony-tp"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="yes"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
    Here is a segment of my dmesg
    [ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
    [ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
    [ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
    [ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
    [ 2.766808] ACPI: AC Adapter [AC] (on-line)
    [ 2.776492] wmi: Mapper loaded
    [ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
    [ 2.778291] iTCO_vendor_support: vendor-support=0
    [ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.789182] [drm] Initialized drm 1.1.0 20060810
    [ 2.789538] hub 4-1:1.0: USB hub found
    [ 2.789616] hub 4-1:1.0: 8 ports detected
    [ 2.792925] Non-volatile memory driver v1.3
    [ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
    [ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
    [ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
    [ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
    [ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    [ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [ 2.800067] Registered led device: tpacpi::thinklight
    [ 2.800091] Registered led device: tpacpi::power
    [ 2.800106] Registered led device: tpacpi::standby
    [ 2.800120] Registered led device: tpacpi::thinkvantage
    [ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
    [ 2.801162] sdhci: Secure Digital Host Controller Interface driver
    [ 2.801164] sdhci: Copyright(c) Pierre Ossman
    [ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 2.801709] Copyright(c) 2003-2011 Intel Corporation
    [ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
    [ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
    [ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
    [ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
    [ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
    [ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    [ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
    [ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
    [ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
    [ 2.802188] Registered led device: mmc0::
    [ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
    [ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
    [ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
    [ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
    [ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
    [ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
    [ 2.845820] Registered led device: phy0-led
    [ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
    [ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
    [ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    [ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
    [ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 2.943739] mei 0000:00:16.0: setting latency timer to 64
    [ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
    [ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
    [ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
    [ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
    [ 2.946523] mei: unable to register watchdog device.
    [ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
    [ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
    [ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
    [ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
    [ 3.274597] Bluetooth: Core ver 2.16
    [ 3.274611] NET: Registered protocol family 31
    [ 3.274612] Bluetooth: HCI device and connection manager initialized
    [ 3.274614] Bluetooth: HCI socket layer initialized
    [ 3.274614] Bluetooth: L2CAP socket layer initialized
    [ 3.274618] Bluetooth: SCO socket layer initialized
    [ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 3.276006] usbcore: registered new interface driver btusb
    [ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
    [ 3.444567] Linux media interface: v0.10
    [ 3.447387] Linux video capture interface: v2.00
    [ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
    [ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
    [ 3.448690] usbcore: registered new interface driver usbhid
    [ 3.448691] usbhid: USB HID core driver
    [ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
    [ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
    [ 3.450987] usbcore: registered new interface driver uvcvideo
    [ 3.450988] USB Video Class driver (1.1.1)
    [ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
    [ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
    [ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
    [ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
    [ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 3.492062] i915 0000:00:02.0: setting latency timer to 64
    [ 3.538056] mtrr: no more MTRRs available
    [ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
    [ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.538271] [drm] Driver supports precise vblank timestamp query.
    [ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
    [ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
    [ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 4.407165] fbcon: inteldrmfb (fb0) is primary device
    [ 4.575259] Console: switching to colour frame buffer device 170x48
    [ 4.577042] fb0: inteldrmfb frame buffer device
    [ 4.577043] drm: registered panic notifier
    [ 4.607860] acpi device:01: registered as cooling_device4
    [ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
    [ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    [ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
    [ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
    [ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
    [ 5.099467] NET: Registered protocol family 10
    [ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 6.098038] Bluetooth: RFCOMM TTY layer initialized
    [ 6.098055] Bluetooth: RFCOMM socket layer initialized
    [ 6.098057] Bluetooth: RFCOMM ver 1.11
    [ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
    [ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
    [ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
    [ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
    [ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
    [ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
    [ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 25.663056] eth0: no IPv6 routers present
    Any hint for tracing the root of this problem? Thank you very much!

    Hi ...
    If you have moved the Safari application from the Applications folder, move it back.
    As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
    Go to    ~/Library/Caches/com.aple.Safari.Cache.db.  Move the Cache.db file to the Trash.
    Try Safari.
    Mac OS X (10.7.2)   <  from your profile
    If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
    Update ...
    ~ (Tilde) character represents the Home folder.
    For Lion v10.7x:  To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

  • How to Grey out the field "tracking number" during change mode in the order

    HI Expert,
    How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
    during creation IW31 = not grey out and allow entry.
    for change mode IW32 = grey out
    if i set grey out at config OIOPD, it will grey out even during creation mode.
    Please advise
    Thanks
    Regards

    Hi
    I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
    regards
    thyagarajan

  • During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation.  Tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!

    During installation of itunes using Windows 7 64-bit, I have this error come up every time during installation. 
    "An Error occured during intstallation of Assembly "Microsoft .VC80.CRT type="win32". version="8.0.50727,6195", public Key Token="1fc8b3b9a1e18e3b, processor Architecture'+x86'".  This is all followed by some more text and code HRESULT:0x80070005   
    Ive tried uninstalling and re-installing, tried msconfig startup and service checks. At my wits end. Help!
    Anne Marie

    Probably should've searched around a bit more. Just saw a similar forum post to my own in which redownloading and burning solved another user's similar issue. As of now I've redownloaded the 64-bit ISO, burned it, and so far so good (at 72% extracting files). I will repost here if it was a success in hopes that other users with a similar issue find this and benefit from it. Hope I didn't just waste anyone's time with a question that had already been answered (haha)

  • I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

    I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Problems getting track times to import.

    I have experienced a problem where the CD track times display on the CD I am importing, but when that CD is in the Library, some or all tracks display "not available" for the track time. When those tracks are downloaded to the I-pod, they get skipped over. Is there a way to edit in track times in the library, and in I-tunes itself? I'd like to not have to re-import a bunch of CD's if at all possible.
    E-Machines   Windows XP  

    As far as I know, you can only generate track names on CD's from Gracenote if the order, the amount of tracks and the time per track on your CD is correct (= original).
    So, if you have complete albums, and you are able to 'reconstruct' them as described above (same tracks in same order as on the original CD), than burn a CD from this. Mount this CD in iTunes, and let it search in Gracenote; if you did a good job, you will receive your track names. You can now re-import your tracks to iTunes.
    But, when the albums that are incomplete or when you don't want to spoil all this empty CD's, I think you'll have to retype all your track names. Maybe you can look for the track names on Gracenote or amazon and copy-paste this.
    One good thing : if you have converted your AAC's to AIFF's (that's how I understand it), you did get rid of the protection and you will be able to burn as many CD's from this songs as you want

  • When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

    When I playback a movie stored on Time Capsule to my Mac Book Pro the time Capsule eject 3 or 4 times during playback

    ilw-00 wrote:
    How can I do this? How can I find the sparesbundle? What is the best way to mount the time capsule internal disk?
    Open a Finder window. If you see your Time Capsule in the "Shared" section of the sidebar, clicking on it should show the "Data" volume (or whatever you named it) in the main part of the window. Double-click on it to mount the "Data" volume.
    If you don't see your Time Capsule in the Finder sidebar, you may not have enabled "disk sharing" in AirPort Utility. In AirPort Utility do a "manual setup of your Time Capsule, then select the Disks panel, then the "File Sharing" tab, then check "Enable file sharing", select a security method (I use "With a disk password"), fill in the remaining options as desired, then update the Time Capsule. Once it restarts, try again to see your Time Capsule in the Finder's sidebar.

  • The events of the last month have suddenly disappeared.  I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Possible to retrieve ???v

    The events of the last month, with the photographs have suddenly disappeared from the iPhoto Library.  I have opened these successfully several times during the last few weeks, but on opening them yesterday they weren't there any longer. No idea how this could have happened! Is it possible to retrieve ???

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Portal Users Login Time during a particular interval

    Hello,
    I have gone through many forums and blogs but didn't find any helpful comments on how do I get the list of users and their respective login times during a particular time interval. All my users are stored inside the portal only, I am not using a dual stack system. Please tell me if there is some way to find out the solution to this problem.
    Thanks  & Regards
    Ashish Patel

    Dear Ashish
    Have you checked the Portal DB Tables ?
    For example this table WCR_USERSTAT  might be of use to you (but there are others).
    But you might not find the information for "a particular interval". I believe you will have to do some development for that.
    Kind Regards
    /Ricardo Quintas

  • Regarding R/3 down time during the INIT Run

    Hi All,
    Please let me know the methods to reduce to R/3 Down time during the INIT Run.
    What happends if the tables( Setup / Update) are not locked in R/3 during the INIT Run.
    Your help would be appreciated.
    Thanks,
    Vijay

    Hi,
    To conclude..
    In Direct delta:
    note that no documents can be posted during delta initialization procedure from the start of the recompilation run in R/3 (setup tables filling job) until all records have been successfully updated in BW: every document posted in the meantime is irrecoverably lost.
    In Queued delta:
    The document postings (relevant for the involved application) can be opened again as soon as the execution of the recompilation run (or runs, if several and running in parallel) ends, that is when setup tables are filled, and a delta init request is posted in BW, because the system is able to collect new document data during the delta init uploading too (with a deeply felt recommendation: remember to avoid update collective run before all delta init requests have been successfully updated in your BW!).
    don’t forget that, regardless of the update method selected, it’s ALWAYS necessary to stop any document postings (for the relevant application) during setup tables recompilation run !
    Hope its clear.
    reward if helpful.
    shylaja.

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

Maybe you are looking for