Tracking a ramping signal and checking for range thresholds

I have a signal which ramps at 0.05 volts/second. During this state, there is a possibility that the ramp rate
exceeds the 0.05 v/sec. operation (runaway condition). Does anyone have any ideas about how to track this and
respond to the runaway condition?
Solved!
Go to Solution.

How is the signal being generated? How are you sampling it?
You could just take the difference between two samples and if their rate is out of a certain range, take care of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.

What can I do to change the sound of a track in garageband? It is "stuck" on electric piano setting and will not change. I've tried restarting, restoring sound library, full key reset, and checked for updates.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Cancellation / Reversal of Credit memos and Check for payment

I have few cases where the credit memos and check for payment documents have been keyed with an incorrect posting date.
What should be best approach to reverse these transactions.

Hi Somchitra,
in such situations ideally you would use the cancellation document standing on the original document, alas, a credit memo has no target document.
You will need to create an invoice with exactly the same data as in the credit memo & then internally reconcile these transactions. If the credit memo was in itself generated from an invoice, you need to cancel that reconciliation first. After that you re-create the credit memo with exactly the same data, just with the correct dates.
To cancel the cheques for payment you need to cancel the payment itself with the original document date & 'Cancelled' will be put in the 'Remarks' on the cheque.
You will then need to recreate the payment with the correct dates.
If you have already confirmed the printing of the cheque, you'll need to issue a new cheque number & destroy the printed copy, if it hasn't been printed, you can select the appropriate number in the 'Cheque number confirmation' window.
As always when correcting transactions, please keep an eye on the stock transactions & make sure they are correct. Also, for auditing purposes, always enter an approriate text in the 'remarks'.
All the best,
Kerstin

TS3276 can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

can anyone help on the following please. When I have been away from the office for a few days and check for emails it only supplies the most recent 100 emails and the ones before that are never received. thanks

Does your server have a limit?

HT1688 I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active.

I can not restore and upgrade my Iphone 4. When i plug in to computer itune's restore and check for update buttons are not active. What is that mean?

Razmee,
Guess what? After posting, I read another thread on this topic where someone said they went to an Apple store and the tech person there added the optional username and password in the Outgoing Mail Server boxes, and then reset the phone again. Although I had tried resetting and restarting a few times today, I had NOT reset it after entering the username and password into the optional fields.
When I entered my username and password into the optional fields, the iPhone entered checks (ticks) to the right of every entry; it had not done this earlier. (I didn't reset at this time, and the outgoing mail would still not transmit).
So just now, I reset it and the outgoing email was sent!
Thanks to you and this forum, it's a great ending to a few frustrating days.
I hope this message helps others. Not only does everything have to be entered correctly in the respective boxes; but once everything is entered and you press the "Done" button, every box should then have a check mark next to it and then you must reset the phone.

I have just rented a film and clicked the menu button instead of pause. When I go back to the film to rent again it says I have already rented this go to settings and check for downloads. But there is no download option in settings?

I have just rented a film and clicked the menu button instead of pause. When I go back to the film to rent again it says I have already rented this go to settings and check for downloads. But there is no download option in settings?

It does... Apple TV has a problem with the assignment to the itunes account after updating. Restore to factory settings or unlog and news login to the itunes store helps to see the rented/downloaded film(s).

Help!! Auto-Deploy and Check For Updates in an OPMN-managed instance

I'm trying to use the auto-deploy and check for updates functions in an OAS 10.1.0.3 but I can not make it work.
I don't Know if this functions are only availables for a standalone OC4J instance.
Can anyone help me??
Thanks!!! and sorry for my poor english.

Auto-Deploy is not really designed for an OPMN managed instance -- in earlier releases, this would not even work correctly since deployments where stored in the DCM subsystem and any subsequent configuration changes made via DCM would overwrite the config and you'd lose the "auto-deployed" application.
In 10.1.3.x where DCM is no longer in the picture, and the auto-deploy polling is a function of Oc4J itself, it may work. Be aware that this is not something that is tested in OPMN managed environments.
What configuration changes have you made?
You need to ensure you have modified server.xml so the attribute check-for-updates="all" and you've added the attribute application-auto-deploy-directory and have it pointing at a directory to watch.
-steve-

HT1657 I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it.

I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it download in settings.

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630. plz help me

When the iPhone 4 with IOS 5 is connected by cable to iTunes and check for update results in Error 1630, plz help me to update plz

My Iphone 4 crashed yesterday after a restart and upload of OS 5.0, it will only partially sync. It's not transferring any of my music or ringtones. They still appear when I click open the sync screens on ITunes, but I don't seem to have an Ipod function and only one of my personalized ringtones transfers on the actual phone.

HT1339 My ipod classic fails the sync test on Windows 7. help say go to summary tab and check for updates. I cannot find a summary tab

My ipod is failing the sync diagnostic on my Windows 7. The troubleshooting guide say go to the Summary Tab and "check for updates" I can't find a summary tab. I have no problem sync with windows vista.

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

Xml parsing and checking for certain elements

Hi,
I need your help on how to parse an xml and check for certain elements
in the xm. Can any one help on this regard. If you can pls send me the sample code for this one.
Thanks and Regards,
Srini

http://java.sun.com/xml/tutorial_intro.html

Apple TV - i'd like to watch what i paused. The system says i have to go to itunes and 'check for downloads.' The wheel keeps spinning..... the system won't let me rent again.

Apple TV - i'd like to watch what i paused. The system says i have to go to itunes and 'check for downloads.' The wheel keeps spinning..... the system won't let me rent again.

Question is a bit unclear. Once you start a rental, you have 24 hours to complete it. I pause mine all the time. When I hit play again, I get a choice to either resume where I left off or start all over. I believe it is necessary to have an internet connection while view ATV content, so if you lost the connection, that might make it "spin".
Re your tag line "Can I view my ATV thru my iPad?" If you have a wifi connection, you can view almost anything with AirPlay. Or you can view anything from the various ATV selections without having your iPad on. Of course, you have to pay for some options like HBO, Netflix, etc.

I have rented a movie from apple tv but cant watche it,it says go to itunes store and check for rentals, but its just lowding

just rented a movie from my apple tv, accidently got out, and cant play it back, it says that go to itunes store and check for rentals, but it just show lowding and lowding please some one help, how can i play it back????????????????

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

ITunes does not allow me to download at Store "You do not have authority to write in iTunes Media files. Adapt your authorisation in explorer and check for available downloads in Store

As administrator of my pc icannot download musc/video from Store: the message (translated from Dutch) "You do not have authority to write in iTunes Media files. Adjust your authorisation in explorer and check for available downloads in Store

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

I have installed itunes 10.7 several times. All goes well. After reboot, I go into itunes and check for updates and it says I need to download the update 10.7! (And so cant sync with my Iphone)

I have installed itunes 10.7 several times, all goes well. After reeboot, I go to check for updates and it still wants to update to version 10.7! I cant sync to my iphone4 because I get an error message saying I need version 10.6.3 or later. Help

Thank you for getting me started on the track by mentioning "Revo" Uninstaller. The results of "Revo" spoke volumns on why a successful install of ITunes is so difficult to achieve. It is the evil "BONJOUR".
I then tripped upon the following site by Apple and the detailed directions (I read, printed, re-read and followed the instructions. It was intense) brought a successful ITunes, Quick Time and the lovely Bonjour home. Thank you for the start JD42.
http://support.apple.com/kb/HT1923

Tracking a ramping signal and checking for range thresholds

Similar Messages

Maybe you are looking for