Tracking and displaying previously approved access

We have a requirement that the Sun IM be capable of keeping track, and displaying the state, of the access that has been previously approved to the user. By performing changes to resource attributes (for example "NT Groups") under the attribute tab of the user it seems entirely possible that these attributes could later be modified directly within the resource hence changing what is reported when the user is viewed (or updated) again, hence giving an inaccurate view of what access the user is supposed to have. In contrast, by defining roles it seems that it is possible to track what attribute access has been approved (by Role approval) and hence what the access state of the user should be.
My question is whether the product is capable of reflecting the access that has been approved, and what the Sun recommended method(s) are for reflecting this when a user is edited (updated) or viewed?
PS - I have noticed that a Reconciliation Policy can be modified to detect whether native changes have taken place in a resource (irrespective of whether a roles or direct attribute modification took place to effect the original change), but that it is only possible to report this attribute change from within an Audit Report. Is there some way that this could be reflected within the form when a user is updated or viewed?

Hi,
Could you please share the solution if you were able to find one.
Thanks,
Vinu

Similar Messages

Timeline - Cannot Move Tracks and Display Problem

I've created about a ten-minute timeline that I'd really prefer not to toss out because a lot of work went into creating parts of it and getting the timing right with the music, etc. When I first open the project in Premiere Elements, everything seems okay - my timeline plays with all transitions and I can scroll around in the timeline. However, I appear to have done something where whenever I click and drag to try to move a track, the timeline goes insane. I get a circle with a line through it for a cursor and a blank tooltip window, whether I try to drag the track horizontally or vertically. After that, while the timeline will still play, the timeline itself gets all wonky in its display, almost as if the video isn't refreshing on it. (It's kind of like the timeline has crashed.) I attached a screenshot of what it looks like. Whenever I move my cursor to the edge of the timeline, the timeline scrolls in that direction.
I'm running Premiere Elements 7 Educational Version on a Core 2 Duo laptop with 3GB RAM, an Intel 965 graphics chip (latest Intel drivers are installed), and Vista Business 32-bit. The clips are from a standard DV cam (not HD), and there are some PNG format stills and MP3 sounds mixed in there as well. There are three active A/V tracks. I think that's all the relevant information, but ask me if you need more.
Can anyone tell me what I've done and/or how to fix this?

Good morning every one!
The bad news: As expected the problem does still occur. The good news: I was able to track it down to one clip in the timeline.
To save others time, I will described what I have evaluated quite detailed in the following paragraphs...
As it seemed to me that deactivating the Windows indexing service made the usage of PrE more stable I thought that maybe file locks would cause the trouble. So I verified this by opening the project in PrE, writing and executing a small Java application that puts an exclusive file lock on one of the files from the project and tried to move the according clip in the timeline. It worked without any problems and the known symptoms did not occur. So we can put aside the file locks.
Afterwards I tried to reproduce the problem by playing around with the scene that caused problems last week. I tried by moving around the video clips and the problem did not occur. Then I remembered my statement I have made earlier, that the problems seemed to occur as I started to work with titles and music clips -- and bingo: I have three music clips in my "soundtrack" track and one of them seems to cause the whole trouble. After I have clicked on this specific music clip, the problem occurs and it is no longer possible to move anything in the timeline and the strange behaviour regarding the automatic scrolling when the cursor is at the left/right etch is activated.
It was easily reproducable: Restart PrE, open my project, move a video clip to verify that moving clips works, click on the specific music clip and the problem occurs. I have tried this several times and each time the problem occured. When I clicked on one of my other two music clips everything was fine -- same for the video clips I tried. So in my case it seems to be this single clip.
OK, what's specific regarding this clip: All my music files are placed on a share on my Windows home server (in contrast to the video footage which is located on the local HD). So I moved the "dangerous" music file to the local HD, changed the path to the file with a text editor directly in the PrE project file (which is a simple XML file) and started up PrE again. I verified that PrE takes the file from the local HD (server was down), but the problem did still occur. So it is not a network issue.
The next specific thing is, that this music file is the only file in my project which is a .wma-file -- the others are .mp3-files. So I did three things:
At first I downloaded the project file provided by SQFreak2 in this thread and checked whether he is also using .wma-files. The result: He does not use them.
As the second thing I again changed my project file in the text editor: I changed the path of the music clip to some other .mp3-file. Afterwards I opened up PrE with that project file, used the playback to verify that the other music file is referenced by the clip instead of the original wma-file and then tried to move the clip -- again the symptoms occured.
As the last step I created a new project, added the "problematic" wma-file, placed it on the "soundtrack" track and afterwards tried to move it. The result: No problems at all.
So it neither seems to be a generic problem with wma-files nor does it seem to be a file-specific problem at all.
Lets summarize the things from above: File locks do not cause any trouble. In my project a single audio clip seems to cause the problem. The problem seems to be caused by the clip and not the file referenced by the clip (no matter whether local or server based, wma or mp3, the problem occurs in every case).
What I have learned? Well, I am not sure. But in the meanwhile I am quite sure, that it hasn't to do anything with hardware and drivers, but that we are dealing with a bug in PrE that occurs in specific project cirumstances.
This morning I have got some additional ideas I would like to try to track the problem down (e.g. the problematic clip has a transition for a fade out in the end [when I did this I didn't knew, that a fade out could be easily achieved in the clip's properties] -- I will try to remove this one and look what will happen).
P.S.: In one of my earlier posts I stated the assumption that the problem occurs as soon as I move the mouse cursor over the vertical scroll bar of the timeline -- but this is definitely not the case.

I have had my mac pro mac air and apple tv stolen can apple track and or turn off access?

I have had Mac pro and a air stolen a. apple track ad or cut access off to device?

This is the Mac Pro (desktop workstation) forum. You'd do better asking Apple directly or posting your question in
MacBook: Notebooks: Apple Support Communities

When I unplug my headphones my music pauses. But when I plug them back in the controls won't restart the music and I must go to the list of tracks and select a new one to start again

I have an iPhone 5 with iOS 7.04
If I am listening to music using my Apple earphones when I pull the earphones out the music pauses as expected. However, when I go back and plug the earphones in and try to play on with the music nothing happens and I have to go back to the list of tracks and select a new one from the start.
This also is impacting my listening to music from my iPhone on my motorcuycle audio system. The iPhone is plugged into a USB port on the bike and prior to iOS7 always resumed playing music from wherever it was in a track and displayed the music track name on the bike info panel.
Since upgrading now the music won't start and again I have to pull the iphone out of the glovebox and go back to the list of tracks and select a new track. But the moment the power interrupts or the nav audio cuts in and switches from iPod the music pauses and doen't restart as it always did.
Apple, what have you done?? You have basically taken the very first App that made the iPod exist and stop it functioning properly. When are you going to fix this or is there already some obscure setting that needs to be changed but that is not prominently displayed in settings anywhere? How can I make my iPhone function as an iPod properly again for my music needs?

Nothing wrong, no panic. Some general remarks:
a. the battery will not be charged when over 95% full; a full battery is not charged
b. it is good for the battery to have it go down to about 50% before recharging, say once a week at least.
c. never let the battery go down completely, so that it shuts off on its own: that is very bad for a modern smart Li battery.
d. sometimes the old "battery calibration" procedure is advised, you should not do that.
trick: when you click the little battery icon in the top menu bar, you also see if there is a heavy energy user running.

Cannot Input and Display Chinese Characters by using ODBC Applications

Dear all,
I am trying to input the Simplified Chinese Characters in the Oracle Database Ver 9.2 running on a UNIX AIX server. The client application we are using is th MS Access 2003 running on a MS Windows XP English version SP 2 without multi-language pack. MS Office 2003 is also an English version.
Database setting is:
NLS_CHARACTERSET=US7ASCII
NLS_NCHAR_CHARACTERSET=AL16UTF16
The Oracle Client used is also ver 9.2 with the ODBC driver ver 9.2. I have tried the following NLS_LANG settings by chaging the registry without any NLS_LANG environment settings:
AMERICAN_AMERICA.ZHT16MSWIN950
AMERICAN_AMERICA.ZHS16GBK
AMERICAN_AMERICA.ZHT16HKSCS
AMERICAN_AMERICA.AL32UTF8
I have tied to load some Chinese Characters in by sqlload and by using the NLS_LANG AMERICAN_AMERICA.ZHT16MSWIN950, AMERICAN_AMERICA.ZHS16GBK and AMERICAN_AMERICA.ZHT16HKSCS, they can be display perfectly in SQLPLUS. But when using the same NLS_LANGs and display in the ACCESS, only ???? are displayed.
When I tried to insert Chinese in ACCESS, the character changed to ???? again. No matter what Chinese characters I inserted by MS ACCESS, the ???? code can be dump with the binary code "03, 0f".
Are there any methods or settings I need to change to make ACCESS an application for inserting and displaying Chinese characters from the Oracle database?
I have tried to set the Non-Unicode setting in the Windows Locale setting:
Chinese (Taiwan) (With AMERICAN_AMERICA.ZHT16MSWIN950),
Chinese (Hong Kong S.A.R) (with AMERICAN_AMERICA.ZHT16HKSCS) and
Chinese (PRC) (with AMERICAN_AMERICA.ZHS16GBK)
when inserting the Chinese Characters by Access. But they all failed with ???? inserted in the DB.
Please kindly advise what should be done.
Thanks.

Are you trying to store the character data in char/varchar2 columns?
If that's the case then you have a problem, since a US7ASCII character set can only handle, well, ascii data.
If you are trying to store the data in columns of nchar datatypes, then there might be a problem with literals because literals are converted to database character set first, before conversion to national (nchar) character set. Such data loss can also happen depending on how binds or oci calls are performed.
You could use the dump() function to verify what's actually stored in a database column, without a db - client conversion happening that may distort the facts.
Example:
SQL> select col, dump(col, 1016) from table where some_condition;

How to access and display a Web Service from a WSDL in JSP or JSTL ?

Dear All,
We need to access a Web Service which is hosted as WSDL How to access a WSDL file from JSP or JSTL, parse and display the SOAP response in JSP page.
Any simple example or URL as reference to an example will be useful for me.
It seems io tags of jakarta is able to send soap message, but how to display it in JSP.
Yours,
Sankar.B

Dear Sir,
Yes. I would like to know more about the Forte and how to consume WSDL file from JSTL. The following are my querirs.
1. How to connect the declared JNDI from a JSP page. i.e: the Datasource - ex: booksDS
2. We connect the Tomcat server using JNDI as jdbc/scott. But, if I give jdbc/scott in JSTL as datasource={jdbc/scott}, we could not able to connect. We use the following code in a JSP page to connect the DB from a JSP page. (Its quite easy to modify, so we use the connection in a JSP page.)
3. How to Consume a WSDL url from JSTL. Ex: If there is a URL : http://localhost/ws/MathService.asmx?wsdl OR http://www.xmethods.com/test/BabelFish
4. How to display the result. We tried via SOAP from io taglib of Jakarta, but gives us an SOAP (it also looks like xml) response. But, how to use the value from that soap response in IE client thru JSTL/JSP.
5. Whether this JSTL tool will be available with Forte Enterprise/Community Edition. If so EE, whats the price.
Please Reply Immediatly. We tried, trying, going to try to display a wsdl response, but not able to display in IE thru JSP/JSTL. But, weve tested the www.gotdotnet.com examples of asp.net web services, we are thru. Its quite easy it seems in .NET. But, we feel whether even there is not even one example in JSTL/ Java Web Services Dev. Pack to utilise a web service in full cycle. The example which uve given is thru servlets. We dont use servlets. Cos, its very easy to edit JSP pages, instead of compiling the serv. and using it.
I hope ull reply for all the above queries, since ur from SUN.
Expecting your fav. reply.
Yours,
Sankar.B

My iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help

my iphone 5 was just stolen and i dont have the find my phone app or any other tracking app installed previously. how can i locate my device?? please help

If you didn't set up Find My iPhone in the iCloud settings, then you can't. Notify the police and change the password to your Apple ID and any other online services you used from that iPhone, just as a precaution.
Regards.

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

I am trying to do a check deposit on my bank app and I had previously disallowed access to the camera. How do I allow access now?

I am trying to do a check deposit on my bank app and had previously disallowed camera access.
How do I now allow access?

There are two places where camera access can be changed:
Settings - Privacy - Camera - <your app>
Settings - <your app> - Camera

ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio

Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Ipod will not display track and artist name when i play a song

ipod will not display track and artist name when i play a song... i cant see the the volume display to adjust it eiether. Everyting shows up in the menus just not on the now playing screen.... any suggestions?

Try restoring your iPod. Just be aware that restoring will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Running Windows 7, all versions of Firefox beyond 3.6.0 will not access websites, showing Error 404 and displaying only the portion of the URL that follows the domain name

Choosing any of several dozen bookmarks, Firefox will show a screen reporting Error 404 and display only part of the complete URL (whatever follows the slant mark beyond the domain name). When going to a new site, such as provided by a Google search, the initial page may show up but clicking on links within that page again brings up the 404 error. My only solution has been to uninstall whatever new version of Firefox has been automatically downloaded and then re-install version 3.6.0, which works.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
See also http://kb.mozillazine.org/Error_loading_websites

Message Tracking and Queue Viewer access is denied - Exchange 2010

Hello,
I am experiencing Message Tracking and Queue viewer problems on my exchange server.
Message Tracking problem
When i run message tracking via EMC or powershell, i receive the following error;
Failed to connect to the Microsoft Exchange Transport Log Search server on computer "myserver.mydomain.com.br". Verify that a valid computer name was used and the Microsoft Exchange Transport Log Search service is started on the target computer. The
error message is: "Access is denied".
Exchange Transport Log Search service is confirmed running and have tried by restarting the service
Logon user is a member of Domain Admins, Enterprise Admins and Exchange Organization Administrators
Message Tracking Logs are generated properly
Queue Viewer problem
When i run Queue viewer, i receive the following error;
The Queue Viewer operation on computer "myserver.mydomain.com.br" has failed with exception. The error message is: Access is denied. It was running command.............................................................
My server information are as follow;
4 Exchange Server 2010 sp3
2 Mailbox Server and 2 Hub/CAS
Mail-flow is working fine
What should I grant permission for a group of users can have access to the Message Tracking ?
Regards,

Hi!
The group rule was created as described below. The error persists!
[PS] C:\Windows\system32>Get-RoleGroup "Exchange Access Message Tracking" | fl
RunspaceId                  : 4229f35d-90f1-4c4e-822d-387979921052
ManagedBy                   : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
RoleAssignments             : {Message Tracking-Exchange Access Message Tracking}
Roles                       : {Message Tracking}
DisplayName                 :
ExternalDirectoryObjectId   :
Members                     : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
SamAccountName              : Exchange Access Message Tracking
Description                 :
RoleGroupType               : Standard
LinkedGroup                 :
Capabilities                : {}
LinkedPartnerGroupId        :
LinkedPartnerOrganizationId :
IsValid                     : True
ExchangeVersion             : 0.10 (14.0.100.0)
Name                        : Exchange Access Message Tracking
DistinguishedName           : CN=Exchange Access Message Tracking,OU=Microsoft Exchange Security Groups,OU=Global,DC=ba
                              ncobmg,DC=com,DC=br
Identity                    : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Trackin
                              g
Guid                        : 0957152d-2073-4f75-b40e-63f45eb20f67
ObjectCategory              : bancobmg.com.br/Configuration/Schema/Group
ObjectClass                 : {top, group}
WhenChanged                 : 06/02/2014 16:25:26
WhenCreated                 : 06/02/2014 16:25:26
WhenChangedUTC              : 06/02/2014 18:25:26
WhenCreatedUTC              : 06/02/2014 18:25:26
OrganizationId              :
OriginatingServer           : bmg190.bancobmg.com.br
[PS] C:\Windows\system32>Get-ManagementRoleAssignment "Message Tracking-Exchange Access Message Tracking" | fl
RunspaceId                   : 4229f35d-90f1-4c4e-822d-387979921052
User                         : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
AssignmentMethod             : Direct
Identity                     : Message Tracking-Exchange Access Message Tracking
EffectiveUserName            : All Group Members
AssignmentChain              :
RoleAssigneeType             : RoleGroup
RoleAssignee                 : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
Role                         : Message Tracking
RoleAssignmentDelegationType : Regular
CustomRecipientWriteScope    :
CustomConfigWriteScope       :
RecipientReadScope           : Organization
ConfigReadScope              : OrganizationConfig
RecipientWriteScope          : Organization
ConfigWriteScope             : OrganizationConfig
Enabled                      : True
RoleAssigneeName             : Exchange Access Message Tracking
IsValid                      : True
ExchangeVersion              : 0.11 (14.0.550.0)
Name                         : Message Tracking-Exchange Access Message Tracking
DistinguishedName            : CN=Message Tracking-Exchange Access Message Tracking,CN=Role Assignments,CN=RBAC,CN=BANC
                               O BMG SA,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=bancobmg,DC=com,DC=br
Guid                         : c3768a00-3f36-4532-b586-a06842a85e24
ObjectCategory               : bancobmg.com.br/Configuration/Schema/ms-Exch-Role-Assignment
ObjectClass                  : {top, msExchRoleAssignment}
WhenChanged                  : 06/02/2014 16:25:26
WhenCreated                  : 06/02/2014 16:25:26
WhenChangedUTC               : 06/02/2014 18:25:26
WhenCreatedUTC               : 06/02/2014 18:25:26
OrganizationId               :
OriginatingServer            : bmg190.bancobmg.com.br
How can I identify if there is any setting to be done?
Thank you!

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

I have a large number of photos I'd like to delete from my ipad 2 however from reading previous comments it seems I have to unsync from the original source computer. I'm in another country now and don't have access to it. Is there another way?

You should be able to do this via the iPad directly. Open the Photos application and the forward arrow, then select all of the photos you want to delete and click the red delete button.

My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button). I know there's a simple fix, but what?

My garageband can't be used because when I open a project (new or old) the program extends beyond the bottom of the display screen and I can't access what is below the bottom of the screen (like the record button). I know there's a simple fix, but what?

two things to try: either click the green "zoom" bottom at the topLeft of the window in the title bar, or go to your System Prefs and then Displays, and increase the resolution that is used

Tracking and displaying previously approved access

Similar Messages

Maybe you are looking for