Tracking and logging of user accounts

how to do tracking and logging of user accounts... monitoring of user accounts... please help

Similar Messages

1. TACAS+ Accounting and Logged in Users report is not working on ACS 4.1(1

Hi,
I am facing problem with ACS 4.1 accounting, TACAS+ Accounting and Logged in Users report are not working, the csv file is been generated but nothing is showened in the file.
I have checked the documents related to ACS 4.1, it says that there is a bug related to command accounting âCSCsg97429 - TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23â.
Tried upgrading the same with the patch applAcs-4.1.1.23.3.zip, still it is not working.
Other reports are working fine.
1. TACAS+ Accounting - not working
2. Logged in Users - not working
3. TACAS+ Administration - working
4. Passed Authentication - working
5. Failed Attempts - working
Any suggestions or any idea, please revert.
Regards
Vineet

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

Itunes constantly trying to open in logged in users accounts on Vista

My new computer is constantly trying to open itunes in all logged in users accounts. Once it opens in one of the accounts it will continually make an error noise everytime it tries to open again because it obviously can only open in one account so the other accounts are getting the "unable to load.." message. When the logged in users go back into their account it will have what seems like 50 of the error messages. It is even trying to open in the users account that does not have an itunes account. This is very annoying. Please help! Thanks

If it is a new computer and you haven't installed anything except firefox, maybe there was something preinstalled on it. IIRC some Roxio software can be configured so that it starts up iTunes at system start for example.
One way to investigate this is to do a selective start up using MSConfig. Start off with just the essential items and the iTunes related programs as in this article.
http://support.apple.com/kb/HT2292?viewlocale=en_US
If the problem disappears with the selective startup, start adding stuff back a few items at a time until the problem comes back.
It's a bit of a sledge hammer to crack a nut I am afraid, but it should allow you to identify the problem.

Delete the previous administrator and make a user account for myself on my iMac G4

delete the previous administrator and make a user account for myself on my iMac G4

Open the Accounts pane of System Preferences, create the new account, log in with it, and delete the existing one. If the computer's one you've recently purchased, you may want to erase the drive and install a new OS; do this only if you have the computer's original disks or a retail package compatible with it.
(64808)

I cannot log into user account with old password after using migration assistant.

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

What you propose would not solve the problem I am having. I must not have been clear about it. So I will elaborate.
I have a Power PC with 10.5.8. The admin user account name is RLE 5. I need a password to log into my root user account on my Power PC.
Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account. The admin user account name is Mac Pro. When I turn on the computer it opens to my admin user account where I have access to everything.
I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro. That seemed to to successfully.
So I now have four users on my Mac Pro: RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
I turn on my Mac Pro and it opens to my Mac Pro admin user account. I don't need to sign in. No problem.
I log out of Mac Pro. On my screen are the four user accounts. I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password. I type in the password I used for my Power PC. It keeps telling me it is the incorrect password.
I cannot log into my user account RLE 5 on the Mac Pro. I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password. It doesn't make a difference.
Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason. I have also tried to change the password for that Guest User account also but with no luck.
Another interesting thing has happened. I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts. But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password. Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password. But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
Any suggestions would be appreciated.

How do i put my songs onto a cd and log into my account?

i just downloaded this to my computer i usually do it on my phone how do i put my songs onto a cd and log into my account on the computer it wont let me
<Re-Titled By Host>

Downloaded what? No idea what you're talking about.
Please have your keyboard checked. It seems the punctuation keys are not functioning, making it difficult to read your post.

Copy and paste between user accounts

is there a way to copy and paste between user accounts?

You can drag files to the Drop Box folder in another user's Public folder.

Track currrent logged in user in jsf-adf

hi,
i need to track current logged-in user in my jsf-adf page. so that i can write their logout time back in db. i will update the table based on unique username.
kindly guide me.
Regards,
Edited by: user12217029 on Dec 14, 2009 9:59 PM
Edited by: user12217029 on Dec 14, 2009 10:39 PM

Hi,
We often use a userInfo managed bean with session scope that we initialize when the user logs-in. During the application it provides easy access to the userinfo, e.g. as an 'injected' property of another managed beans. On logout we can access this bean again (either by retrieving it from the session or as an injected property).
You could consider using a logging framework, e.g. log4j, with a JDBC Appender to write the data in the database. It's quite easy to filter only the logout messages.
Ciao
Aino

HT3910 Once I register my MBP and create a user account, I get a gray screen and it does nothing.

Once I register my MBP and create a user account, I get a gray screen and it does nothing.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion without being able to perform a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls (via i

My last Time Machine back-up is 45 days old and only of User Account files (not entire HD) and I must now reinstall Lion (via internet) without performing a new back-up. Will any new User Account files, since my last back-up, be lost when Lion reinstalls ?

Reinstalling OS X doesn't affect user data, provided nothing goes wrong. But it would be very unwise to assume that nothing will go wrong, especially if you're having (unspecified) system issues. You should try to back up all data before you reinstall or do anything else. There are ways to do that, even if you're unable to boot.
If your backups include only user files, you won't be able to access them in Setup Assistant.

Can't log into User Account after disrupting external hard drive

I keep my account (Admin) on an external hard drive due to the large volume of data. I mistakenly pulled out the USB cable to the drive while trying to resolve another issue. Subsequently, it appeared a lot of my data was missing. I restarted the computer and couldn't log into my user account. It seems pulling the USB cable to the external drive corrupted something. I verified both disks (internal & external) and all was OK. I ran Disk Permissions and tried to repair. The resultant information is attached at the bottom of this message.
I can access my data on the hard drive from my laptop over the network. I just can't get into my user account directly. Any ideas on how I can address this issue?
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions differ on "Library/Frameworks/HPPml.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Frameworks/HPServicesInterface.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Printers/hp/Frameworks/Matterhorn.framework/Versions/DI_MH.A.05.01.001 /Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .
Permissions differ on "Library/Printers/hp/Frameworks/ResourceManager.framework/Versions/DI_RM.A.04.0 7.000/Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .

There may have been another solution to this problem but I went the route of creating another user name and migrated the data over to that name. Thank you!

Login to Jabber Client (Windows/Mac) with current logged in user account.

We are deploying Jabber Client for Windows and will eventually be deploying for Macintosh. I have no problem building the thinapp deployment package for the Jabber client. However, when the thinapp is ran, it always shows the account that was used to initially login to the client and setup the server connection.
Is there a way for the client to use the current logged in user in the sign in field? I am trying to automate or SSO the process of logging into Jabber.
Any and all ideas, tips, and/or tricks are greatly appreciated!
Thank you,
Wes

This is nothing to do with the TC. This is your user issues on the Mac.
I would do a major fix on the computer.. copy your user files to another location.. create a new administrator account.. login with the new admin account and delete the old one. Delete all the files associated with that account, so you are effectively starting with a clean Mac.
I have just sold off a couple of computers and that is how I prepared it for the next person.. it seemed to work easily and removed all my stuff from the computer whilst still giving them full admin access.
Please I am far from expert in doing this kind of stuff in OSX so just look up deleting original user accounts in whatever OS you run.

Any new user creation gets: unable to log into user account error

Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
Yeah, and then hit Save!
Message was edited by: VincensoXFIN

Sharing files and library between user accounts

I know this question was asked many times before, but I never read a clear answer. Is it possible to share the library (and files) from one user account to another user account on same computer (same apple ID in iTunes) so that when user 1 downloads music, user 2 will see the music (without any additional steps) when they log into iTunes.
The problem I ran into was user 2 had to manually add the new purchased music to their library in order to see the music. If user 2 was unaware of any purchases, user 2 unaware could potentially repurchase the same music.
My issue is my other users (family members) are not diligent when it comes to checking.
Is there an easy way to sync the two music libraries (or 1 real library) across multiple user accounts on the same PC.

Move the library to the /Users/Shared/ folder, go into each user account, launch iTunes with the Option key held down, and choose that library.
(111791)

Parse Security Logs for User Account logon Computer Name

Greetings,
I was recently tasked with creating a list of user accounts and the computer in which they logged onto. Unfortunately, we do not have time to use the logon script method. I believe we can achieve this goal using software similar to LANSweeper
however not all computers will be turned on at a given time and I believe this application gathers it's information from the client PC. One possible solution I see is parsing the data from our domain controllers Security Logs / Successful Logons however
this is proving to be a challenge. Any suggestions?
Thanks,
Chris

Hi Chris,
I was recently tasked with creating a list of user accounts and the computer in which they logged onto.
I believe we can achieve this goal using software.
There is no built-in tool to complete this task.
However, we can configure event log trigger to send email when specific logon events are generated.
Here are some related articles below for you:
Getting event log contents by email on an event log trigger
http://blogs.technet.com/b/jhoward/archive/2010/06/16/getting-event-log-contents-by-email-on-an-event-log-trigger.aspx
Send an email when an event is logged
http://blogs.iis.net/rickbarber/archive/2012/10/26/send-an-email-when-an-event-is-logged.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Tracking and logging of user accounts

Similar Messages

Maybe you are looking for