Tracking Clearances/rights/releases for images/sound/video

Hi,
We use Captivate CS5 for creating elearning.
How do people track all the clearances/rights on images, audio,.video and releases from voice overs?
regards and thanks

Binky2 wrote:
...it appears that all of one's iTunes are available for use.
Welcome to the discussions. Although it appears to be available, you may find that those apps won't actually accept or publish that iTunes music.
Binky2 wrote:
But isn't such use a violation of copyright/use laws?
Yes — unless it's music you created yourself or music which you have the rights to re-distribute.
Binky2 wrote:
Are there rules about recording sound in public places?
I don't know, but you may be able to deduce something from this article:
http://wiki.creativecommons.org/PodcastingLegal_Guide#UsingMusic

Similar Messages

Horizontal layout for images or video

Hi, Sir
May Check with you how coldfusion can layout for images or
video in horizontal way? the default is vertical when we use
cfoutput. what founction and tag support, or we had to design a
horizontal looper for the purpose?
The example web page horizontal layout is the youtube.com,
like URL:
http://youtube.com/browse?s=mp,
All the video were layout in horizontal.
Thanks and Regards
David

See
this
link
Ken

How to include zoom option for images and video in adobe captivate5?

I am developing an elearning software with captivate 5 which has images and video.
I want to include an option to be able to zoom the images and video if clicked on the particular area.
It should zoom any part of the image when clicked on it during run time and go back to original size when clicked again.
How can I do this?

1. I try with two images: The thumbnail y the Big Image Zoom image Detail.
2. I Use Dinamic Images
3. check this tip

Use same player for images and video

Greetings,
I am working on a media player using Flash Pro CS4. I am
totally new to Flash, but I do have experience coding in C#. I have
included a URL to a media player used by the UFC. I'm trying to
figure out how they have a single media player that allows you to
display either an image or have the next selection in line be a
video that plays. I did find a tutorial on in the Flash Developers
Center on how to create a dynamic video player with an XML
back-end, which is very helpful, but it only covers using video. If
anyone could help me out by pointing me in the right direction, I
would greatly appreciate it.
Thanks,
PAffiliates
PS...Below is the URL I mentioned...
http://www.ufc.com/includes/flash/FeaturedMediaGallery.swf?4

So fair warning, what you're asking for isn't really a supported deployment method of CRM.
That said, you should be able to do some DNS trickery internal to your network that points your "crm.domain.com" to "crm.domain.local" and then hopefully CRM will treat the connection as if it came from an internal network.
Otherwise, you're likely going to have to accept that everyone gets the ADFS login page internal and external to your network.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Videodownloader add-on for years it no longer works for images. Video only. Why?

Videodownloader add on is one of the most useful tools in my work. It is imperative i 'm able to download multiple images at a time. It has worked great until 3 days ago. I went to download the page images and the VD icon did not animate. So I went to youtube and for a video and it animated. Itried reoving and reinstalling,but no good. I've looked at VD preferences and FF options and don't see anything that would cause it.

Try DownthemAll Addons

Right click for image info

Most of my photos are hosted on Pbase. I am going thru some of my pics to get to the original files. Right click using Firefox gives "image info" as an option. This shows the original file no. However, right clicking on an image in Safari does not give the image info option.
I have looked at settings in Safari, but cannot locate if some setting needs to be changed.
If this cant be done, is there a workaround for this? (Other than using Firefox for this of course)
Thanks
Ronnie.

That image displays fine for me in Firefox on Linux, but I'm not seeing anything in a Windows Firefox version that runs under Wine.
Even the Tools > Page Info > Media preview panel is blank there, but saving the image is possible.
<br />
<pre><nowiki>data:text/html,<img src='http://imageshack.us/a/img12/4543/visualizedp1776ddv27731.jpg'></nowiki></pre>

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Creating a slideshow: need to fit still images in video track to audio

Hello,
I am creating a simple slideshow in FCP. I have 99 still images, all sequential, with a transition in my video track. I have two audio songs in sequence in my audio track. The obvious problem is that my audio is much shorter than my 99 images.
Of course, the next task is fitting the video to the audio. But with 99 still images, I do not want to edit each individually. I need to be able to select all images, and fit them all to the audio, so that the duration of each still image is shortened equally, i.e. a symmetrical compression of the duration of each.
I haven't figured out quite how to do this. I thought the ripple tool would work, but I haven't been able to make it work on all image clips. Can someone help me out and let me know how this is done? I suspect it's quite easy, I just can't seem to find any documentation on this either in the FCP user's guide or via Google.
Thanks in advance.
Brad

I should have also mentioned, that I get the FCP
"beep" or "bonk" whatever the sound is, when I try to
change the duration and it won't change. I can't
figure it.
Brad,
Okay, this has happended to me before. It's user error, but right now for the life of me I can't remember what was wrong and what I did to fix it.
Try this...highlight only one clip and try just one clip. Will that clip change duration?
If it does it may be a problem in highlighting "all" of the clips. Give me a minute or two and I might remember what I did to fix the problem when I had it. Most likely when it happened to me I ...1. played with it...2. cussed....3. played with it some more....4. cusses....5. got a diet coke and forgot about it for awhile...6. somehow fixed it.
You can always try the original suggestion. There's always more than one way to skin a cat. Sometimes, I go the long way just to get there. The short cut doesn't do you any good if the road is closed so to speak.
Dual 2 GHz Power Mac G5 Mac OS X (10.4.8)

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

Why I have to mute Audio Voice Recording Track always in order to subdue the voice recorded when I want to solo other tracks, audio or midi for listening.The other audio tracks don't sound without being muted. Please advise how to deal with this .Thanks

Why I have to mute the Audio Voice recording track ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
Dan

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video,

I own an iPod Classic. In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod. It used to work perfectly, but now for some reason, it doesnt convert properly! When I play the video, it is just a white screen, but the sound can be heard. Can anyone help??????

Your source video file is probably muxed.
Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
See: iPod plays video but not audio of some exported files.
You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
Try MPEG Streamclip.

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

Add specific hotkeys for vlc (disable video track without disabling audio track)?

There's no way to add hotkeys for [menu bar > Video > Video Track > Disable] under Preferences or Advanced.
When I use [SysPreferences > Keyboard > Keyboard Shortcuts > Application Shortcuts > '+'] to add a hotkey for "Disable", it applies to audio also [menu bar > Audio > Audio Track > Disable].
How do I disable the video track without going through the menu bar? Can I go into vlc.app and edit it? Or is there an app that will help? Or is there a way to specify which (menu bar>disable) I want to add hotkeys to, in application shortcuts?
I'm actually using 10.8 if that matters.
(It only has 35 followers compared to 10.9's 250 followers)

Bump

Can i make a video and use an external mixer for the sound?

can i make a video and use an external mixer for the sound with my ipod touch?

You need a special plug to use the iPod's mic in for the headphone jack. If you compare a headphone plug for a set that includes a mic and one that does not you can see that there is a difference.

Tracking Clearances/rights/releases for images/sound/video

Similar Messages

Maybe you are looking for