Tracking FMP with GoogleAnalytics?

Has anyone tried tracking Flash Media Playback with GA?
Thanks in advance.

Similar Messages

Unable to perform multi audio tracks mixing with Audio Mixer

How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer?
I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track. Simple enough.
So I go to the Audio Mixer. Position the CTI at the start of the tracks and hit the red RECORD button. The red spot starts blinking. Then I hit the START/STOP button expecting the tracks to start mixing into the Master track. Instead, I get this error message
"PLAYER ERROR: You cannot record without enabling at least one track for recording."
I get the same problem if I try the mix onto a submix track.
What am I missing? I combed through the Premiere Pro User Guide and J. Rosenberg's Premiere Pro Studio Techniques but to no avail.
Thanks for any help.
JB.

Jacques, I havn't seen 1.5 for a while, so I need to stress that what I'm about to say is more of an educated guess linked to a rough memory.
Each audio track in the mixer has a small chip (tickbox in 1.5??) that you click in order to enable that track for recording. In CS3 it's a little microphone.
Having said that, I DON'T think that's going to give you what you want, as the intention of the recording functionality in PP is to record audio FROM AN EXTERNAL SOURCE (like a microphone) straight to an audio track, say, when doing a Voice Over for some video.
You can't "mix down" to the master, as the master is not a track per se. It's just a "final" level control. The master will always be the sum of the active tracks, and THAT'S what will be rendered in the final output.
You can still "live mix" your audio with the faders, it's just that those movements get recorded as keyframes on each of the tracks you modify (including, BTW, the Master).
The advantage to this workflow is that every fader move you make is infinitley editable... a small error when riding the faders can easily be fixed by dragging keyframes.
HTH.
Matthew

Magic Track Pad with Lion 10.7 and Safari zoom aA vs Pinch to zoom

Hi,
I enjoy a Mac Mini (early 2009) hooked to a 50 inch plasma and surf from my couch, stream etc... We browse with Safari 5.X and enjoyed the new Magic Track Pad with Snow Leopard. You could zoom / scale Safari with Snow Leopard beautifully, with a pinch out on the trackpad, same function as aA option on the browser task bar.
Now with Lion, the pinch to zoom feature zooms but doesn't scale the safari window the same way aA option used to. In lion a pinch out to zoom in will push a significant part of the browser screen off / out of view.
The aA option on the safari task bar scales the window, and keeps everything visible but larger, but now in Lion it is not available from the Magic Track Pad Gestures. The Button is still there on the browser but there is no option to access it from the track pad with a gesture.
How can I revert to the old way of zooming / Scaling a Safari web page with my Magic track pad in Lion?
Thanks,
H

You can see in that screenshot that a lot of browser.gesture.pinch prefs have an empty string as their value and thus won't have any effect.
You can restore some zoom feature by modifying the values of the related prefs on the about:config page via the right-click context menu.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
You may want to toggle this pref (I don't know what effect this has):
* browser.gesture.pinch.latched -> false
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

How do I create multiple midi tracks each with separate external synthesizer sound

Mac Pro OS 10.10.2, Logic Pro 10.1.1, FireFace 800 (updated), Roland XP-30 synthesizer/keyboard, Mackie mixer.
XP-30 analog output to Mackie, FireFace monitor to FireFace main inputs and FireFace out to Mackie.
What I can't get to work: Sound output for monitoring as I record on each of several midi tracks, each with access to my banks/programs.
Logic automatically set up the multi-instrument and created 16 tracks, visible in the mixer window. I have entered custom banks for the XP-30 and they are working.
Mt problem is two parts. First, my last experience was with Logic Pro 7 way back.
Problem two is that when I create midi tracks (except for the first one I created on channel 1) by control-clicking on one of the tracks in the mixer window I get no sound for monitoring. I can see the green monitor indicator for the track shows midi data incoming. I just can't hear it. It's as if there is no designated output. I have checked audio preferences and see the FireFace as input and output device. If i change the channel to channel 1, I get the sound, but then I have two tracks on channel 1 which doesn't work for designating unique sounds to each track.
I can select "All" for channel and get monitored sound on several tracks; however, they then all play the same sound, of course.
i can create midi tracks (either instrument or external) using the plus icon, but no matter how i set them up that way, they do not allow me access to my banks/programs.
In logic Pro 7 it was no problem creating multiple midi tracks, each with a different sound assigned to it. In Logic Pro 10, I am baffled regarding how to accomplish this and get it all to work as simply and nicely as I was able to with #7.
Make sense? Can anyone help?
Thanks

I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
source, and Performance settings can be modified. If you’re
using an external MIDI device to control the XP-30 in this
mode, it will function as a multitimbral sound source."

Tracks ripped with EAC Play alphabetically, when ripped with Media Player Play in the correct or

I just got my new zen touch. I downloaded the new firmware update and it seems to be working great.
The only problem is that when I add music that I've ripped with Exact Audio Copy c/ Lame Encoder to MP3, The tracks don't play in the correct order on my Zen Touch.
When I add an album ripped with Microsoft Media Player, it plays them in the correct order.
I think that the ID3 tags have all the appropriate info becuase when I hold my curser (on the computer) over the eac ripped tracks, the pop up menu list the track #, artist name and song title etc.
I've read the FAQ and it doesn't matter if I select Album-Play, Artist-Album-Play. I've tried all combos.
Anybody with experience using EAC? I've looked in the settings and I can't find anything wrong.
Is it possible that EAC is using and ID3 Format that my computer recognizes but my zen touch doesnt.
But Media Player uses an ID3 format that it does recognize.
Also, The album ripped with media player was ripped to WMA. While all the tracks ripped with EAC that are giving me trouble were ripped to MP3.

What software are you using to copy? Make sure both that and the drivers are completely up-to-date.

My iphone 4 got stolen, can i still track it with moblie me if they restore my iphone? or is IMEL help?, my iphone 4 got stolen, can i still track it with moblie me if they restore my iphone? or is IMEL help?

my iphone 4 got stolen, can i track it with moblie me? if they restore my iphone can i still track it?
it is really important to me

If you signed up for Find my iPhone you should be able to track it, unless the thief has turned the phone off or removed the SIM card. Also, if the thief has restored the phone it will no longer work. Log into www.iCloud.com and see if you can see the device. If not, then there is nothing you can do but notify the police and change all of the passwords on things you had on the device. Sorry for your loss.

Multiple Video Tracks Problem with Back Button

Hi,
I am making a DVD that has to contain 16 films. Unfortunately the videos don't have the same aspect ratios, so I have to create one video track for each film.
When the DVD is started they are supposed to play all in a row (no menus). So the end action for each track is to jump to the first chapter of the next track.
My problem is that once I am playing, say, track 5, there is no way to get back to track 4 with the "back button" on the remote control.
Do I have to script this? And if yes, how?

That is exactly my problem. Chapter markers only work on the same track, for some reason you can't jump to a chapter in a different track. What I need is a solution to jump from a track to the previous one when pressing the back button on the remote.
As I wrote before I can't use just one track for all films, because they have different aspect ratios.
Message was edited by: schmiddl

Hi, I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why? In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

Hi,
I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
But I zoom in、the waveform was not ended at Zero point.
Why?
In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

correction needs to be made to step #14, I typed:
14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
Another Correction:
Originally read:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

How to use track effects with new version of GarageBand

In the version of GarageBand before this one, you could access different effects that you could manage and apply to the different tracks. Each track had an area containing its set of effects that were either activated or deactivated. With this removed, i am not sure how to add those same kind of effects. I am aware of the new nobs that are provided in order to mix and edit trebles, bass, mid, etc., but i want to be able to add different effects such as voice transformer, flanger, chorus, speech enhancer, bit crusher, bass amp, track echo, track reverb, amplifier, etc. I desperately need help finding out how to do this, as this was a major part of my mixing and producing with GarageBand, and without these given effects, i do not feel as comfortable using GarageBand.

zachseiden wrote:
How to use track effects with new version of GarageBand
this may help:
http://www.bulletsandbones.com/GB/GBFAQ.html#replacemissingtrackeffectsgbv10
This FAQ entry offers a Minute GarageBand video tutorial
(Let the page FULLY load. The link to your answer is at the top of your screen)

My iphone.4 has been stolen,i want to track it with another iphone or my pc ... is that possible ?

my iphone.4 has been stolen,i want to track it with another iphone or my pc ... is that possible ?

IF you installed and activated find my iphone on the iphone iself BEFORE it was stolen, AND it is on, AND it has not been restored, then you may be able to track it.
Since you are asking the question, I am guessing that you did not install find my iphone.
If this is the case, then, no, you cannot track it.
Sorry.

I am signed in to my wifes iphone and it has been stolen. Tried tracking it with find my iphone, but it doesn't show up in my device.

I am signed in to my wifes iphone and it has been stolen. Tried tracking it with find my iphone, but it doesn't show up in my devices. She doesn't have a separate id. Any ideas why or what I could do to make it would be greatly appreciated.

It was still turned on, I am tracking with life360, but apple's tracking is more accurate. I just wondered why the phone doesn't show up in my devices on iCloud if I am signed in on it with my apple id. Thanks

HT201365 Okay, so somebody stole my Ipod, 4th generation, and it don't have IOS 7, it has IOS 6, and apparently I was tracking it with police officers this morning and when I get home from school (now, 4:26) it appears that it's offline and I can't see t

Okay, so somebody stole my Ipod, 4th generation, and it don't have IOS 7, it has IOS 6.1.4, and apparently I was tracking it with police officers this morning and when I get home from school (now, 4:26) it appears that it's offline and I can't see the location no more, so my question is... Can they still find out where is it located?

Your carrier might be able to locate it if it's on their network and they are ordered to do so by the police or the courts. It can't be tracked with Find My iPhone if it's offline.

Tracker conflicts with libtracker

Hi!
A few days ago I did a system update and pacman says that tracker conflicts with libtracker and so dependencies could not be solved. I can't remove libtracker, it depends on nautilus, so I removed tracker and a "pacman -Syu" works again. But I can not reinstall tracker because of the conflict with libtracker.
So is this a bug? I don't know what exactly to do now because I am kind of new to the Arch Community.
Any help on this would be appreciated.
thx in advance

jbob wrote:
I have exactly the same problem here.
Edit: Just found this, and the mentioned solution
pacman -Rd libtracker
pacman -S tracker
worked for me.
didn't work for me either however
sudo pacman -Rd tracker
sudo pacman -Syu
worked fine
the version of tracker for me was tracker-0.6.91-4 (not sure which version I upgraded from)
I'm on x86_64 FWIW; I don't think your WM/DE is going to make a difference
Edit: actually the conflict between tracker and libtracker still exists if I
sudo pacman -S tracker
just doesn't come up if I
sudo pacman -Syu
so I guess the question may still be there
Last edited by tj (2009-04-07 10:46:39)

Is it possible to import Tracking Codes with Cisco WebEx Meetings Server 2.5?

Is it possible to import Tracking Codes with Cisco WebEx Meetings Server 2.5?

Hi,
In documentation, you can find only what is possible and supported in the product. We don't document what is not supported.
At this time, there is no feature request submitted for this as I assume no one requested such a feature. If your customer really needs this feature, I advise you to reach out to your/their Cisco Account Manager, explain the feature you would like to see, so they can reach out to Product Management and see if this could be built in the next product version.
I hope this helps.
-Dejan

I am using MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by ITunes. How do I bring all the bonus tracks together with the original album?

I am using a MacBook Pro and running 10.8.4. iTunes version 11.0.4. Several of the cd's i have imported recently have been split into multiple albums by iTunes where it has identified bonus tracks. How do I bring all the bonus tracks together with the original album?

Hello there, Fineshot.
The following Knowledge Base article might provide some information that should help you resolve the issue you're having:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Tracking FMP with GoogleAnalytics?

Similar Messages

Maybe you are looking for