Tracking Individual Users Scores using Captivate 4 and Connect Enterprise
Hi,
I work in an IT shop and currently I am having trouble supporting our Marketing division's Captivate needs. They wish to be able to create quizes for online viewing in an LMS and be able to track individual users scores for accountability. Right now I we are using Captivate 4 with Adobe Connect Enterprise. I have been able to use the LMS and view quizes online, but all reporting is done as aggregate and not a session by session (individual) basis. Thus, I only have access to average, max, min scores and other info about all test takers, but no information about specific test users. I have considered accomplishing this by sending data to an access database, but this would require the IT deparment to regularly assist them with creating tests. Obviously I am looking to have the Marketing department be as self-sufficient as they can be. I think the easiest way would be to have the quiz report a session ID (unique for each instance of the quiz being accessed) to Adobe Connect and having Connect associate each aswer to a specific session ID. Other than that I do not have any other ideas for proper tracking of each user's score.
Does anyone know what the easiest (least amount of involvement from the IT staff each time Marketing needs to make a test in captivate) way to accomplish this?
Thanks!
So, i sorta found a way to do this -- by adding a TOC and making the lessons self-paced, the user will always be brought back to the place where they left off when they exited the lesson.
But it seems that even though the icon in the curriculum list changes to CONTINUE when the user closes the lesson, it still unlocks the next lesson even though the staus checkmarks in the previous lesson are not complete.
Help. Are there any other such postings?
Similar Messages
-
Hi, i cannot activate my iphone 3Gs i tried many times using wifi and connect. to itunes but activtion is always failed. can you help me to fix this problem?
Do you have a SIM in the phone?
A SIM is required to activate it.
If you DO have a SIM in it, the most common cause of this problem is a phone that was hacked to illegally unlock it and has been updated or restored. -
Is it possible for one user to use Aperture and another iPhoto?
I have a new imac 21.5", 3.33ghz, 4gb and I was wondering if it is possible for me as admin user to handle camera downloads automatically with Aperture, and my wife as second user to use iPhoto as automatic camera destination? Any comments would be appreciated.
If you want to use the same account there are a number of possibilities:
1. Set both Aperture and iPhoto to Do Nothing when a camera is connected. Then each one can launch their preferred app themselves. It's just one extra click.
2. Use [Cameras|http://www.flexibits.com> to configure what happens when different cameras are connected.
Regards
TD -
Will there be a problem if i use DO and connect it to Gnd on 6036E DAQ ?
I am trying to use DIO channel 0 as digital output(set at 'high' always) and connect it to analog channel 0. I then plan to use gnd to break the circuit. So, analog input will give me 'high' always except when i gnd it. Will i burn up my DAQ card by grounding DO to Gnd.
Hey Jake,
I would never recommend doing this. The digital lines on the 6036E have no isolation and they would surely burn up if they were driving 5V and tied to ground. This would be exceeding the rated 13mA.
I would suggest using the digital outputs to control an external relay that could be used to switch the line from a 5V external power source or ground. In any case you want to turn off the 5V or disconnect the 5V circuit before pulling any line to ground.
I hope this helps out.
Joshua P.
Application Engineering
National Instruments -
We're doing a monthly meeting that involves a lot of on
screen demos, as well as a presenter and questions from the
audience. The room is fully video equipped, however, it's lousy at
recording the screen due to the resolution and lighting of the
projector.
I'd like to capture all on-screen action and presenter audio
via Captivate, and then record the meeting with the video in
addition. Is there a practical way to then maybe add the video to
the captivate presentation? Maybe as an FLV in a small 'picture in
picture' type of window?Hi darreldarrel
I'm guessing you might be able to accomplish it by recording
the Captivate and publishing to create one .SWF. Then create a
second Captivate that is larger than the first. This one could
become a "one slide wonder".
Insert the first Captivate into the second. Then insert the
video and position as desired. I'm thinking this may create the PiP
effect you could be looking to achieve.
Keep in mind that it's just theory at this point. I've not
tested it. There could be issues I've not considered by using this
approach.
Cheers... Rick -
How do you track a moving object using Labview and Vision Assistant
I am using Vision and Labview to create a program that tracks and follow a moving object using a high end camera. Basically what it does is it detects a foreign object and locks on to it and follows it where ever it goes in a control sized room.
I have no idea how to do this. Please help. Or is there an available example.
Thanks.Hello,
It sounds like you want to look into a Vision technique called Pattern Matching. Using our Vision tools, you can look for a image, called a template, within another image. Vision will scan over the entire image of interest trying to see if there are any matches with the template. It will return the number of matches and their coordinates within the image of interest. You would take a picture of the object and use it as the template to search for. Then, take a picture of the entire room and use pattern matching to determine at what coordinates that template is found in the picture. Doing this multiple times, you can track the movement of the object as it moves throughout the room. If you have a motion system that will have to move the camera for you, it will complicate matters very much, but would still be possible to do. You would have to have a feedback loop that, depending on where the object is located, adjusts the angle of the camera appropriately.
There are a number of different examples a that perform pattern matching. There are three available in the example finder. In LabVIEW, navigate to "Help » Find Examples". On the "Browse" tab, browse according to "Directory Structure". Navigate to "Vision » 2. Functions". There are examples for "Pattern Matching", "Color Pattern Matching", and "Geometric Matching". There are also dozens of pattern matching documents and example programs on our website. From the homepage at www.ni.com, you can search in the top-right corner the entire site for the keywords, "pattern matching".
If you have Vision Assistant, you can use this to set up the pattern matching sequence. When it is complete and customized to your liking, you can convert that into LabVIEW code by navigating to "Tools » Create LabVIEW VI..." This is probably the easiest way to customize any type of vision application in general.
I hope this helps you get started. Take care and good luck!
Regards,Aaron B.
Applications Engineering
National Instruments -
Connecting to OS/390's together using CIP and OSA (Enterprise Extender)
Is it possible to connect to OS/390's together (VTAM to VTAM) over WAN link using CIP against OSA & Enterprise Extender ?
If so has anyone demo what/how to configure each site.
ThanksHi Magnus. I presume your question is related to using CIP for host channel access for host-to-host connections vs. using OSA (OSA-E). You can certainly support IP connectivity (CLAW/CMPC+) using the CIP. So if the VTAM hosts are EE enabled (with EBN if VTAMs are in different subnets) you can support transport over the CIP. If EE is not in the picture then DLSw+ might fit into the picture since DLSw+ supports PU4/5 to PU4/5 connections. DLSw+ is not an SNI replacement solution however (EE/EBN is). Regards, Steve
-
SAP BW Roles for CPIC user to use in Univ Connection
Hello All,
I am working on BO XI 3.1 and SAP BW 7.0. At present we are using personal logon credentials in the Universe creation wizard to connect to SAP BW. Instead we would like to create a CPIC user and use that user to connect to SAP BW.
I am wondering what are the roles/authorization this user should assigned.
I greatly appreciate your input.
ThanksIngo,
Thanks for the reply. I went the through "SAP Integration Kit Installation" document.
It has details on SAP Single Sign-On and required authentication details. At this moment we are not ready for that.
As I mentioned in the email, we are using the BW developer logon credentials in the Universe Connection Wizard to SAP BW. We would like to get away from that by creating general user in SAP BW specifically for the purpose of BOBJ reporting.
And we just do not want to copy SAP BW developer role to the generic user instead we would like to assign only the required roles. I am not sure what are the minumum roles required for this user.
It would be great if you can share any information related to that.
Thanks -
Oracle: slow performance with SELECT using ojdbc14 and connection pooling
Hello,
i'm working hard the last days to solve a performance problem with our customer using a oracle 10g database. For testing I used our oracle 9.2.0.1.0 database which shows the same symptoms. All doing solved nothing: the performance while using this oracle is much slower than other databases. This result I cannot trust and so I need some advice. What is missing to improve the performance on the java side?
The webapplication I use runs fast on MySQL 4.x and SQLServer 2000, but on the above mentioned Oracle it was always 4 times slower. The webapplication uses a lot of simple SELECT-Statements without complicated joins and so on (because it should run on many different databases). Doing some days of creating tests within this webapplication, I was not able to find any entrance point for a change. All databases server I'm using, having only the default configurations after a common installation.
To reduce the complexity I wrote a simple java application with connection pooling using only the latest libraries from apache-commons(dbcp, pool), and the latest ojdbc14 for oracle 9.2.
First the results than the code: MySQL needed less than 1000 millisecond, SQLServer around 1000 milliseconds and Oracle over 2000 milliseconds. I stopped pooling and the results are for Oracle even worse: over 18000 milliseconds (mysql:2500, sqlserver:4100).
I changed the classes for Oracle and used the class oracle.jdbc.pool.OracleConnectionCacheImpl from the ojdbc14-library. No difference (around 100 milliseconds more or less).
The only Select-Statement works on this table, which has one index on HICTGID.
It contains 259 entrances.:
CREATE TABLE HIERARCHYCATEGORY (
HICTGID NUMBER (19) NOT NULL,
HICTGLEVEL NUMBER (10) NOT NULL,
HICTGEXTID NUMBER (19) NOT NULL,
HICTGEXTPARENTID NUMBER (19) NOT NULL,
HICTGNAME VARCHAR2(255) NOT NULL
);The application simply loops through this table using
SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?, but I always open a connection before this query and closes this connection afterwards. So I use the pooling as much as possible. That's all SQL I'm using.
protected static DataSource setupDataSource(String sDriver, String sUrl, String sUser, String sPwd) throws SQLException {
BasicDataSource ds = new BasicDataSource();
ds.setDriverClassName(sDriver);
ds.setUsername(sUser);
ds.setPassword(sPwd);
ds.setUrl(sUrl);
// The maximum number of active connections:
ds.setMaxActive(3);
// The maximum number of active connections that can remain idle in the pool,
// without extra ones being released, or zero for no limit:
ds.setMaxIdle(3);
// The maximum number of milliseconds that the pool will wait (when there are no available connections)
// for a connection to be returned before throwing an exception, or -1 to wait indefinitely:
ds.setMaxWait(3000);
return ds;
}I can switch by using external properties between three databases (oracle, mysql and sqlserver) and if I want I can switch pooling off. And all actions I'm interested are logged by Log4J.
public static Connection getConnection() throws SQLException {
Connection result = null;
String sJdbcDriver = m_oJbProp.getString("jdbcDriver");
String sJdbcUrl = m_oJbProp.getString("databaseConnection");
String sJdbcUser = m_oJbProp.getString("dbUsername");
String sJdbcPwd = m_oJbProp.getString("dbPassword");
try {
if (m_oJbProp.getString("useConnectionPooling").equals("true")) {
if (log.isDebugEnabled()) {
log.debug("ConnectionPooling true");
if(null == m_ds) {
m_ds = setupDataSource(sJdbcDriver,sJdbcUrl,sJdbcUser,sJdbcPwd);
if (log.isDebugEnabled()) {
log.debug("DataSource created");
result = m_ds.getConnection();
} else {
// No connection pooling:
if (log.isDebugEnabled()) {
log.debug("ConnectionPooling false");
try {
Class.forName(sJdbcDriver);
result = DriverManager.getConnection(sJdbcUrl, sJdbcUser, sJdbcPwd);
} catch (ClassNotFoundException cnf) {
log.error("Exception: Class Not Found. ", cnf);
System.exit(0);
(.. ErrorHandling ...)Here is the code fragment which is doing the work:
StringBuffer sb = new StringBuffer();
while (lNextBottom <= lNextCeiling) {
con = getConnection();
innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
innerSelStmt.setLong(1, lNextBottom);
rsInner = innerSelStmt.executeQuery();
if ((rsInner != null) && (rsInner.next())) {
sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
if (log.isDebugEnabled()) {
log.debug("Inner Statement: " + rsInner.getLong(1) + "\r");
rsInner.close();
con.close();
lNextBottom++;
if (log.isInfoEnabled()) {
log.info("\rResult values: Hictgid, Hictgname \r");
log.info(sb.toString());
}and the main method:
public static void main(String[] args) {
try {
long lStartTime = System.currentTimeMillis();
JdbcBasic oJb = new JdbcBasic();
boolean bSuccess = false;
bSuccess = oJb.getHierarchycategories();
if (log.isInfoEnabled()) {
log.info("Running time: " + (System.currentTimeMillis() - lStartTime));
if (null != m_ds) {
printDataSourceStats(m_ds);
shutdownDataSource(m_ds);
if (log.isInfoEnabled()) {
log.info("Datasource closed.");
} catch (SQLException sqe) {
log.error("SQLException within main-method", sqe);
}My database values are
databaseConnection=jdbc:oracle:thin:@SERVERDB:1521:ora
jdbcDriver=oracle.jdbc.driver.OracleDriver
databaseConnection=jdbc:jtds:sqlserver://SERVERDB:1433/testdb
jdbcDriver=net.sourceforge.jtds.jdbc.Driver
databaseConnection=jdbc:mysql://localhost/testdb
jdbcDriver=com.mysql.jdbc.Driver
dbUsername=testusr
dbPassword=testpwdThanks for your reading and maybe for your help.A few comments.
There is of course another difference between your test cases then just the database. There is also the driver. And I suspect that in at least the case with the jtds driver it is helping you along where you are doing something silly and the Oracle driver is not.
Before I explain the next part I would say the speed differences between MS-SQL and MySQL look about right I think you are aiming here for MS-SQL level performance not MySQL. (For a bunch of reasons MySQL is inherently faster but there are MANY drawbacks as well which have been well discussed on previous threads)
Here is where I believe your problem lies
while (lNextBottom <= lNextCeiling) {
con = getConnection();
innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
innerSelStmt.setLong(1, lNextBottom);
rsInner = innerSelStmt.executeQuery();
if ((rsInner != null) && (rsInner.next())) {
sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
if (log.isDebugEnabled()) {
log.debug("Inner Statement: " + rsInner.getLong(1) + "\r");
rsInner.close();
con.close();
lNextBottom++;
}There at least four things that are wrong with above.
1) Why are you preparing the statement INSIDE the loop. Let us for a moment say that the loop will spin 100 times. That means that you are preparing the same statement 100 times. This is bad. It is also very relevant because for example the Jtds driver is going to be caching the prepared statements you make so that actually while you try and prepare it 100 times it only actually does it once... but in Oracle I don't know what it is doing for sure but if it is preparing on each pass well than that bit of it is going take 100 times longer then it should.
2) You are opening and closing the connection on each pass through the loop... also a terrible idea. You need to fix this first so that you can repeatedly use the same prepared statement.
3) Why are you looping in the first place? More on this later.
4) Where do you close the PreparedStatement? It doesn't look like you do.
Okay so for starters your loop should look a lot more like this...
code]
con = getConnection();
innerSelStmt = con.prepareStatement("SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID = ?");
while (lNextBottom <= lNextCeiling) {
innerSelStmt.setLong(1, lNextBottom);
rsInner = innerSelStmt.executeQuery();
if ((rsInner != null) && (rsInner.next())) {
sb.append(rsInner.getLong(1) + ", " + rsInner.getString(2) + "\r");
rsInner.close();
lNextBottom++;
innerSelStmt.close();
con.close();
I think the code above (and you can put your debug stuff back if you want) which uses ONE connection and ONE prepared Statement will improve your performance dramatically.
The other question though I would as is why in the hell you are doing 100 or whatever number of queries anyway. This can be done all in ONE query which again will improve performance.
Your query and such should look like this I think.
String sql = "SELECT Hictgid, Hictgname FROM HIERARCHYCATEGORY WHERE HICTGID >=? AND HICTGID<=?";
PreparedStatement ps = conn.prepareStatement(sql);
ps.setLong(1,lNextBottom );
ps.setLong(2,lNextCeiling);
ResultSet rs = ps.executeQuery();
while(rs.next()){
// your appending to string buffer code goes here
}and I can't understand why you're not doing that in the first place. -
User Authentication using Servlet and JSp
Hi,
I am developing a web app where i need to implement user Authentication to allow members to view and upload files on a certain directory say /data
For this i am using a servlet as a controller which then forwads request to other jsps/servlets based on user response. I tried using servlet mapping in web.xml so that all browser requests would be directed to controller servlet and would branch from there on. However the problem all RequestDispatcher.forward() requests redirected to the servlet putting it in a loop.
Is there another way to achieve this. (Apart from using form-based Basic Authentication).
I am using Resin 1.2.8 servlet/jsp container.
Any response as soon as possible would be appreciated.
Thanks,
KushagraRequestDispatcher.forward() cause the HTTP request to be sent through the request processing flow as if the original request for the resource being forwarded to.
It seems the servlet mapping you are talking about in web.xml should be made more specific. i.e. the mapping should be such that only your so called controller servlet will match up.
You might want to specify the mapping for the controller servlet to be noticeably/effectively different from the mapping for other servlets and JSPs. -
Re: User Session using ServletSession and Stateful EJB in Cluster
Sorry , I didn't use WLS 6.0, we use wls 5.1 in production.
But in Wls 6.0, in some situations , the state of the stateful session bean can be lost. So it's not so reliable. You have to deal with it in the client code. Instead, servlet is a reliable solution.
In order to test under wls6.0, you can store the handle of the EJBObject in the HttpSession, not in jndi, cos if the instance fails, all its objects will be removed by remaining instances from jndi. In another instance, you get the handle, and try to get the EJBObject.
In wls5.1, some information like the server url must be embeded inside the handle. But in wls6.0, I don't know how they deal with it.
I am looking forward to your results
"Anuj Soni" <[email protected]> wrote:
>
>What kind of clustering problems you had with WL6.0 for Stateful session beans ? It will be helpful for me to know before hand.
>
>BTW, how were you able to test stateful session beans in a cluster under WL6.0 i.e. were you storing the Handle or EJBObject in HttpSession or did you store it in JNDI ?
>
>Thanks,
>
>Anuj
>"Tao Zhang" <[email protected]> wrote:
>>Although it's very advanced to take advantage of both http session and
>>stateful session bean replication, but if you rely on the stateful session
>>bean's state, you will be in trouble. Because the support of stateful
>>session bean's replication is not perfect in wls6.0. We already chaned
>>almost all stateful session beans into servlets or entity beans.
>>
>>I am not sure about the handle of the EJBObject. I think it should be able
>>to reconstruct for us otherwise we can't use the handle any more.
>>
>>You can do a test. BTW, could you tell me the result?
>>
>>Thanks.
>>
>>Anuj Soni <[email protected]> wrote in message
>>news:[email protected]...
>>>
>>> Hi,
>>>
>>> I am designing the workflow for my web application using a Stateful
>>session bean. As Weblogic 6.0 supports clustering of stateful session bean
>>and HttpSession(in-memory replication), I want to use the combination of
>>both techniques to provide load-balancing and fail-over safety for user
>>sessions and their corresponding workflows.
>>>
>>> The question I have is that, Is Handle obtained using
>>EJBObject.getHandle(), fail-over safe (for a clusterable stateful bean), so
>>that I can reconstruct the reference to EJBObject on the secondary server
>>incase of primary server crash.
>>>
>>> My understanding is that I should store Handle in the HttpSession as it is
>>Serializable not the EJBObject. The weblogic 6.0 document only talks about
>>the replica-awareness of EJBObject.
>>>
>>> If my above assumption is incorrect, Can you tell me how else I can
>>achieve my goal ?
>>>
>>> Thanks in advance.
>>>
>>> Anuj Soni
>>
>>
>
Any one tested this scenario yet? i.e: storing the handle to an EJB object and then trying to re-use after the HttpSession is restored?
Thanks.
-
Need to disable users from using nquser and nqpassword in the url with SSO
Is this possible in OBIEE or do I need to creat a mod_rewrite rule to remove nquser= & nqpassword?
suggestion or two in here :
http://kr.forums.oracle.com/forums/thread.jspa?threadID=295697&messageID=3128576
I always thought there is tag that goes in either instanceconfig.xml or another config somewhere (SSO?) to disable this, cant seem to find the reference to it anywhere. -
Captivate 4, interaction SWF using XML and the Reviewer tool Problem
Hello everyone!
I am an advanced AS3er and am only months old working with Captivate 4. I've found some cool ways to use Captivate and incorporating swfs that use CSS and XML for their dynamic content builder and interactivity as well. However, I've run into a problem:
The Reviewer tool will NOT display my swf interactions that use XML, however when published as a course, I can see them perfectly fine (once I move over my css and xml folders after publishing)
Has anyone found a work around for this problem?
Thanks in advance!Hi,
Not sure if you want to control the audio used in Captivate of if you want to control you own audio form files loaded externally. If you try to control the audio associated with captivate, believe me it will be a mess. I tried it once and hit so many hurdles that I gave up. The Captivate framework is not meant at all for extending and adding functionality. I had to to create proxy classes that allowed me to gain access to internal variable but even then my control over audio streams was incomplete. Captivate completely lacks an eventing framework!
On an other subject, can you tell me how you got the swf to use the CSS and XML files? Do you have to manually copy them to a folder? Which folder?
Thanks,
Yves -
Captivate and LMS JavaScript Problem
We use Captivate and a Plateau LMS. We had an issue with
bookmarking within our course. The first lesson worked just fine,
but later lessons were not bookmarking. We added javascript alerts
to the code to see when the Captivate content was setting LMS
variables.
We feared the issue was the bandwidth between the client and
the LMS was so limited that the script attempting to set the LMS
variables was failing, but this is not the case. The script appears
to not run at all sometimes at random intervals. When it does run
it is successful each time. The first lesson, which works reliably,
is much smaller than the other lessons, maybe the size of the SWF
factors into the ability for the script to run properly?
Has anyone else run across this issue? Does anyone have
advice in deeper troubleshooting an issue like this?
Any input is appreciated.
Thanks!
ChrisI think that CP3 sends back its data on a time basis, not a
slide
basis...like every 7 seconds or something?
We've had customers who are tracking interaction data in
their CP
quizzes which have like 40 questions. If they go through it
too quickly,
the timed 'save' to the LMS gets behind quickly...so by the
time the
user is done, only 2/3rds of the suspend data has been
saved...
And I imagine the bookmark could be left out entirely as
well.
So see if it's a timing thing? Go through slowly, see if
posting happens
on a timed basis...maybe that will help determine where the
issue is...
I do wonder how CP4 sends its data back...
Erik
chrishillman wrote:
> The script appears to not run at all sometimes at random
> intervals. When it does run it is successful each time.
The first lesson,
> which works reliably, is much smaller than the other
lessons, maybe the size of
> the SWF factors into the ability for the script to run
properly?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips! -
Cisco Jabber for Windows in Extend and Connect mode and making outbound calls
Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.
Maybe you are looking for
-
Differences between macbook pro displays
hi all! i'm thinking on buying a new macbook pro i7, but i'm a bit confused about the differences between the display options. MacBook Pro 15-inch Glossy Widescreen Display (default) MacBook Pro 15-inch Hi-Res Glossy Widescreen Display MacBook Pro 15
-
Hi, I tried to install Acrobat 9.1 in Vista and it got hung up. Now whenever I try to complete the install, repair the install or uninstall I get the following message: Error 1500. Another installation is already in progress. Complete that install be
-
Copying multiple tables from On Premises SQL to Azure Blob
Hello Team, Using ADF, I wanted to move data from On Premises dataset having multiple tables to Azure Blob. Can you please provide some help or share some samples ? Thanks, Eshetu
-
My screen don't show some colors
Hi I have a weird problem with my colors. I have a mail-box,and new mails have a different color. But this color cant be showing by my screen,,,,it looks like the old mails I have already. When I go to another computer with a LCD screen the color is
-
Please reply ASAP