Tracking Note 4

Got my Tracking number this morning at 8am for my Note 4 but checking the number FedEx still shows nothing. Should I still be able to track even tho its 2 day ground I would think after 12 hours something should be showing up.

FedEx Shipment Tracking - FedEx Ground Track - Track A FedEx Shipment
Smile

Similar Messages

  • How do you add the name of a song to a downloaded track not reccognized in the iTunes library.  I copy songs from my own CDs and want to properly identify them instead of the current "Track 02".  Thanks

    How do you add the name of a song to a downloaded track not reccognized in the iTunes library.  I copy songs from my own CDs and want to properly identify them instead of the current "Track 02".  Thanks

    Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information.  When you are done, click "OK."

  • Auto find tracks not in playlists and delete them?

    Is thre any way I can auto find all tracks that are not in any of my playlists and delete them all in one go?

    If you have a look at Dougs AppleScripts there is one that will find tracks not in any playlist.
    You can use that to create a playlist with them in and then do as you will with them.
    Regards,
    Colin R.
    Message was edited by: Colin Robinson
    http://www.dougscripts.com/itunes/
    Message was edited by: Colin Robinson
    http://www.dougscripts.com/itunes/scripts/scripts01.php?page=1#notinanyplaylist

  • OBIEE 11g - Usage Tracking Not Working

    Dear All,
    I have enabled the usage Tracking in OBIEE 11g by using Setting up Usage Tracking in Oracle BI 11g guide.
    Still i am getting the following error
    Usage Tracking not started due to non-existent Usage Tracking table "12-Usage Tracking"."Usage Tracking Schema"."S_NQ_ACCT".
    In my RPD,
    Database Name : "12-Usage Tracking"
    Physical Schema Name : "Usage Tracking Schema"
    Physical Table Name : "S_NQ_ACCT"
    This table reside under BIPLATFORM Schema in Oracle.
    I have followed the steps mentioned in the Document, still unable to find why getting such error. Please point out if any mistake exists.
    Please advice.

    Hi,
    Good for you.
    Maybe you can post the solution and how you solved your issue to help other users having the same problem and then close the thread (currently it's still This question is Not Answered.)

  • How can i recover my music tracks not saved in itunes?

    how can i recover my music tracks not saved in itunes back up?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

  • Why sports tracker not available for N97

    Why sports tracker not available for N97? One of the most expensive nokia phones without sports tracker. Its weird.. nokia whats happening, dont disappoint N97 customers

    A quick google or a look in Betalabs will tell you that Nokia diverged Sports tracker last year so it is no longer "Nokia" http://runningdigital.com/2009/10/21/nokia-sports-​tracker-update-sports-tracking-technologies/
    Nothing on their site yet http://www.sportstrackingtechnologies.com/, but presumably something will pop up on Ovi Store in the future.

  • TS2972 Since a recent Itunes upgrade I've lost the settings facility in home sharing to import tracks not in my library.  When I check for updates I'm running the latest version.  Any ideas how to resolve this?

    Since a recent Itunes upgrade I've lost the settings facility in home sharing to import tracks not in my library.  When I check for updates I'm running the latest version.  Any ideas how to resolve this?

    Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • Real Instruments Tracks Not Playing

    In one of my songs, the real instruments do not play. However, I can hear the reverb and echo for these tracks. The tracks still respond to editing. The drum loop and Software Piano play just fine.
    Last night, all tracks worked properly, even after deleting a real instrument track. I saved and shut down for the night.
    After booting up today, the remaining real instrument tracks have only very minimal volume; really, just a faint whisper. Track info remains the same and I can see some real instrument track monitor activity, but that's about it for the real instruments.
    In response to some earlier advice, I created a new Real Instrument and/or a Software Track and see if they are soloed. Nothing, no "hidden" soloed Track.
    The real instrument tracks remain silent, though fully editable.
    Any assistance would be great.

    I went into the master track to see what's going on.
    Ducking option was not highlighted, so I clicked on it just to see what would happen. It unlocked all locked tracks, but not the real instruments for some reason. Then, I removed Ducking option.
    All real instruments have returned. Problem resolved.
    It was something to do with Ducking.
    Each day I learn something new. Life is good.

  • How can I keep a backup copy of my iTunes library with tracks not coded and scrambled

    I have about 80GB in my iTunes library and would like to keep a backup copy of all the music in folders under composers, without them being scrambled or any the numbers which are automatically placed in front of each track, which is what happens if I drag and drop them from iTunes. How can I achieve this?

    Thaks for trying but this isn't relevant. I'm not refering to CDs or importing material. I have an iTunes library with nearly 20,000 tracks in it. It is also backed up with a straight copy of the entire works.
    What I want to do is back up the whole lot in a package containing only the music under it's name  and it's original track numbers. I can show best what I mean by dragging and dropping just two piano concertos out into an external folder.
    e.g.
    if this how they apper in my itunes play list
    Beethoven: Piano Concerto No. 2 - 1. (Allegro con brio)
    Beethoven: Piano Concerto No. 2 - 2. (Adagio)
    Beethoven: Piano Concerto No. 2 - 3. (Rondo_ Molto allegro)
    Beethoven: Piano Concerto No. 3 - 1. Allegro Con Brio
    Beethoven: Piano Concerto No. 3 - 2. Largo
    Beethoven: Piano Concerto No. 3 - 3. Rondo_ Allegro
    What I get when I drag these out into a folder on an expernal drive (or even on the desk top of my iMac) is this
    01 Beethoven_ Piano Concerto No. 2 - 1. (Allegro con brio).m4a
    01 Beethoven_ Piano Concerto No. 3 - 1. Allegro Con Brio.m4a
    02 Beethoven_ Piano Concerto No. 2 - 2. (Adagio).m4a
    02 Beethoven_ Piano Concerto No. 3 - 2. Largo.m4a
    03 Beethoven_ Piano Concerto No. 2 - 3. (Rondo_ Molto allegro).m4a
    03 Beethoven_ Piano Concerto No. 3 - 3. Rondo_ Allegro.m4a
    You can imagine what a mess this is when I drag 20,000 tracks into an external backup folder. All the track ones (several thousand of them) of every piece in the entire collection will be listed first. And then all the track 2s.
    I can't sort that out.
    If there is a solution I think it possibly lies in the iTunes preference options. There is one, but I daren't try it for fear of unscrabbling the whole iTunes library and completely throwing all the play lists, folders and everything into a total unsorted mess. I refer to the tick box in the iTunes preference folder 'Keep iTunes media folder organised (places files into album and artist folders and names the files based on disk number, track number and song title)'
    If I untick this would I unscramble years of carefully sorting disks as I imported them?

  • Audio tracks not playing

    A really odd thing keeps happening to me.
    When I open my Logic projects it often doesn't play all the audio tracks. If I double-click a region and open it in sample editor I can play it from there but still it doesn't play the track in arrange. And the weird thing is it's not always the same track.
    Has this happened to anyone else? It doesn't even bounce the tracks offline, the tracks are absolutely mute.

    do they play when moved to another track?
    are they light gray in color? select track or segment and hit the m key.
    are they assigned to a bus?

  • Audio Tracks Not Sounding

    Hello,
    I have several clips (and audio tracks) in a sequence that won't play audio all the sudden. I have no idea why. The problem audio tracks are darkened, and play fine outside the sequence. I'm working in FCP v. 6.0.1.
    Does anyone know what could be causing this? I can't find anything in the manuals -- any help would be greatly appreciated.
    Thanks,
    Therese

    Hi Therese,
    Make sure your audio tracks are not muted. On the left of the tracks there are green buttons for muting, toggling them will mute/unmute your audio.
    Also, if you have an icon of a tiny pair of headphones to the left of these buttons make sure these are not enabled (showing orange).
    DM
    Message was edited by: David Mclaine

  • Audio tracks not lined up and no sound

    For some reason my audio tracks for my clips are on different tracks. Most are on a5/a6 and a3/a4 - those play with sound. The audio on a1/a2 is not heard when I play the clip??? When I try to move the audio to different tracks it messes up my video.
    What I want to do is either figure out how to get the audio on a1/a2 to be heard OR move the audio to tracks that I know work without moving the video.
    Can anyone help?

    No mute. Maybe the tracks are off - but I don't think so? I have a screen capture -- although I cannot figure out how to add that to the post - can you do that???
    the only thing that is different is that the source for the ones that don't work A1/A2 havea source of a1/a2 that is connected. Even if I 'break apart' the a1 from the A1 and the a2 from the A2 still no sound...

  • Audio Tracks not showing in itunes.

    Dear All
    After transferring audio tracks to itunes library I am manually dragging them to my ipod shuffle and the songs are shown in the shuffle but when I am deleting the tracks from the itunes library then nothing is shown in the ipod shuffle folder of itunes but the settings tab shows the amount of space used and the songs are present in the ipod as I can play them. I am not able to manage or change the sequence of song in shuffle since it is not shown in the device folder of itunes.How will I be able to see the list of songs presently transferred in my ipod shuffle if I delete them from the itunes library ?
    Help please.
    Thank you.

    Deba007 wrote:
    Actually I dont keep my audio tracks in my Hard Drive but its in DVDs and CDs. Therefore I import them into the itunes library and transfer them to shuffle manually and then delete them from the itunes library.
    When I am deleting them from my itunes library I cannot see them in the shuffle folder though I can play all the songs in ipod shuffle.This problem does not happen in my Ipod classic 160GB.
    Help Please.
    Shuffle works differently from the "Ipod classic 160GB". There is NO additional help for this issue.
    Message was edited by: 0Ari0

  • Sharepoint server synch for Tracker not happening since upgrade to Acrobat 9 Pro

    Hi,
    I have a user that is unable to share his comments and see updates in Tracker using Acrobat 9 Pro.  There is a warning on Server status that says "some workflows are in error."  It seems that synchronization is with the server is failing, though his connection to the network is otherwise solid.  User can go to the server and go to the folder and open the PDF folder without any issues, but synchronization with server within Acrobat 9 Pro Tracker is failing.  He can join reviews, but is unable to see other reivewers comments and can not see any of the other 8 reviewers listed, he can only see himself and the initiator.
    I did verify that the initator and all reviewers are also using Acrobat 9 Pro.  Only this one reviewer is having issues, everyone else is ok.
    The issue started to happen after user was upgraded to Acrobat 9 Pro. We did try a repair in add\remove programs, but this did not help.  I am wondering if there is anything on the backend, somewhere that needs to be changed.  User did go into a few other Shared Reviews on the Sharepoint server and was able to see 5 reviewers.
    Here are my questions:
    1. Is there some sort of unique identifier that needs to be changed?
    2. Can the initiator delete this one reviewer and then add him back, and would that possibly solve the issue?
    Thanks,
    Julie

    Hi Damir,
    On the page mentioned above you need to click on 'Buy Now' at the right hand side as shown in the screenshot below :
    After that you will see this screen :
    Click on 'Subscription' drop-down and select 'Upgrade', The other dropdown menus will be updated accordingly and you need to select 'I own' as 'Acrobat 9 Pro,
    Platform and Language accordingky.
    Then you can 'Add to cart' and checkout.
    Regards,
    Rave

  • User tracking not finding any hosts in Ciscoworks LMS 3.1

    L.S.
    Our test-configuration is as follows:
    Application versions:
    Ciscoworks LMS 3.1
    Ciscoworks Common Services 3.2.0
    Campus Manager 5.1.4
    We have 31 managed devices in Campus Manager (data has been collected on all),
    Edit: All of them show up green in the topology window.
    The device are: 2 6509 cores (running IOS s72033_rp-IPSERVICESK9_WAN-M version 12.2(18)SXF8), 1 ASA firewall (running ASA-OS version 8.0.5) and 29 switches (2960 and 3560 models both running ios version 12.2(52)SE). The switches are connected as follows:
    User tracking jobs are running normally, but aren't finding any end-hosts or IP phones at all (I suspect around 250-500 hosts+ on these switches)
    We are running SNMP v3 on the switches and have added the following configuration items to all the switches:
    snmp-server group readonly v3 auth context vlan-1
    <repeat for all present snmp-contexts as shown in show snmp context output>
    snmp-server group readonly v3 auth context vlan-83
    Debugging is enabled in CM->Admin->Debugging Options->User Tracking Server
    This is the UT.log file of the last major acquisition:
    messages will remian logged to file: D:\PROGRA~1\CSCOpx\log\ut.log
    2010/01/13 14:00:01 main MESSAGE ProcessInitializer: Properties will be read from D:\PROGRA~1\CSCOpx\campus\etc\cwsi\ut.properties
    I= 0value *.*.*.*
    I= 1value 6
    I= 2value 1
    2010/01/13 14:00:01 main MESSAGE DBConnection: Created new Database connection [hashCode = 10969598]
    PartialOrderNode tree dump: time base = VMPSMajor
    <root>
        VMPSMajor: <root>
        VMPSMajor:     VMPSMajor.GetXMLData
        VMPSMajor:         VMPSMajor.PingSweep
        VMPSMajor:         VMPSMajor.PopulateFromDCR
        VMPSMajor:             VMPSMajor.GetPortStatus
        VMPSMajor:                 VMPSMajor.GetBridgeTable
        VMPSMajor:             VMPSMajor.Sweep
        VMPSMajor:                 VMPSMajor.GetIpXlateTable
        VMPSMajor:                 VMPSMajor.GetIpv6XlateTable
        VMPSMajor:                     VMPSMajor.GenerateTable6
        VMPSMajor:                         VMPSMajor.GenerateTable
    SMFunction evaluation order: time base = VMPSMajor
      VMPSMajor.GetXMLData  Major
      VMPSMajor.PingSweep  Minor
      VMPSMajor.PopulateFromDCR  Major
      VMPSMajor.GetPortStatus  Minor
      VMPSMajor.Sweep  Major
      VMPSMajor.GetBridgeTable  Minor
      VMPSMajor.GetIpXlateTable  Minor
      VMPSMajor.GetIpv6XlateTable  Minor
      VMPSMajor.GenerateTable6  Major
      VMPSMajor.GenerateTable  Major
    Time base VMPSMajor has 5 major nodes and 3 minor traversals.
    log4j:ERROR No appenders could be found for category (CTM.common).
    log4j:ERROR Please initialize the log4j system properly.
    In classlist loader
    In classlist loader processing sub classes
    updation done
    In classlist loader completed
    2010/01/13 14:00:03 main MESSAGE DBConnection: Created new Database connection [hashCode = 12524859]
    Calling default
    Subnet to SubnetData Map Size :73
    2010/01/13 14:01:31 DBConnecton-Reaper MESSAGE DBConnection: Closed Database connection [hashCode = 12524859]
    2010/01/13 14:01:31 DBConnecton-Reaper MESSAGE DBConnection: Closed Database connection [hashCode = 10969598]
    2010/01/13 14:04:50 main MESSAGE DCRDevWrapper: Closing DCRProxy
    I'm slowly getting to a dead end here. What am I missing?

    Well, our problem was resolved finally through a weird coincendence after having a websession with a Cisco TAC engineer (TAC case SR 613376661)
    We changed the
    snmp-server group readonly v3 auth context vlan-xxxx
    commands in the switches to:
    snmp-server group writeonly v3 auth context vlan-xxxx
    that is: use the writestring in the snmp-server groups instead of the read string.
    After we changed that, all of the User Tracking mysteriously started working.
    As far as I know, the writestring should not be needed, but apparently it is....
    Is there any explanation for this?

Maybe you are looking for