Tracking of Attached file by File name in display changes option

Hi All,
i have a requirement where user wants to track the deleted file from document.
when we go to environment-->display changes, system shows only format(wrd,xls etc) of the file which was created and deleted but how to track the file by file name once created and/or deleted.
Thank You,
Manoj

Hi,
I have created new profile and even activated, after deleting attachment from one of DIR there's no log showing for deleting the particular attachments in environment-->display changes..
Thank You,
Manoj

Similar Messages

WEBDAV FILE SYSTEM, user name and password changed

Getting prompt as follows, WebDAV File System Authentication,
Enter your user name and password to access the server at the URL "http://idisk.mac.com/bobbiealiaswink/" in the realm "idisk.mac.com."
User name and password were changed recently by Mobile Me, now either or neither
are being recognized by prompt. Constant reminders every few minutes since upgrading Safari two day ago....I am going buggy with prompts...have tried every possible configuration. Is there a way to enter new access area to enter new username and password?

Hi Alias Bobbie, and a warm welcome to the forums!
If this doesn;t help...
http://discussions.apple.com/thread.jspa?threadID=2082353&tstart=0
Try this...
http://support.apple.com/kb/ts1544

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

Attachment File non-English Name DISAPPEARS problem in BizTalk 2010 SMTP Adapter

Hello ,
I'm using BizTalk 2010 SMTP Adapter for sending mail with attachments by setting them via property SMTP.Attachments
//Attachment
msgEmail(SMTP.Attachments)= AttachmentList;
I have files in several languages (In English and in Russian partialy) for the example
My attachment list looks like this:
"C:\Temp\Files\EnglishNameFile.xml | C:\Temp\Files\RussianFileName_РусскоеИмя.xml";
After the sending Mail with this attachments the second file (it's name partialy in Russian) received without this part name
(The non-english part of name is DISAPPEARS)
like this:
RussianFileName_.xml ( must be RussianFileName_РусскоеИмя.xml)
The NON-English part is DISAPPEARS!!!
And if i have file that doesn't have latin latters (non-english) at all than BizTalk SMTP Adapter change name
to default one like ATT41233.xml
I found this behaviour occur in other non-english languages also!!!
Unfortunately i'm not found any info about this
Any help would be very
much appreciated
Vadim

Refer to this link -
http://social.msdn.microsoft.com/Forums/en-US/163a47cf-db31-49a5-9ee3-ce9272ba24ff/setting-contenttransferencoding-in-dynamic-smtp-port?forum=biztalkgeneral
There is an option of the Multipart message that controls the filename and the charset used to control how the attachment is treated, including content-transfer encoding.
Regards.

SFTP to Mail with attachment as same file name from sender side

Hi All,
I am Using a SFTP to Mail scenario, I have a requirement in which an Sftp adapter after picking up a file should have an attachment with same file name to the Receiver Mail Adapter.
Can anyone help me out?
Thanks in Advance
Edited by: uday kumar on Feb 15, 2009 2:00 PM
Edited by: uday kumar on Feb 15, 2009 2:02 PM

Hi,
Find below link will helpful for configuration, but as per my knowledge file name at attachment will take as message id. Check it with below link, i hope it will work
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure

Media Source - 'file of this name already exists' transfering tracks from Zen Micro to

I've come home for the weekend, and I'm trying to transfer a few albums from my Zen Micro to my Mum's PC for her. Normally this works fine, but for some reason today I keep getting the message 'A file of this name already exists' for about 80% of the tracks I try to transfer. One or two tracks from each album will work and the rest will fail.
These are new tracks and they definitely aren't already in her music library - I've double checked the C dri've too.
I'm given the option to overwrite the exisiting tracks, so I gave that a try with one album, but the tracks still aren't didn't show on there once I'd transfered, despite the track number not going up, so god knows what's been overwritten with those!
Can anyone help?
Cheers!

Your firmware is not the PlaysForSure version.
Anyway, I just want to make sure that you have set up the directory and file naming convention correctly for MediaSource. Here is what you should do:
- Launch Creative MediaSource Oragnizer.
- Go to Tools->Settings->PC Music Library and click Properties. Set your preferred folder and file naming convention. Close the setting page.
- In the Sources window, click to view PC Music Library.
- Go to View->Right Panel View and select to view your MP3 player.
- Transfer the tracks from your MP3 player to MediaSource's PC Music Library by clicking the arrow pointing from right to left.
- If you have updated the track information of the tracks in your MP3 player, the updated track information will also be imported into the PC Music Library database. However, the tags of the files are not updated. Here is what you need to do. Right click the PC Music Library node in the Sources window or right click on any tracks in the PC Music Library window and select "Update Tag". This will update the tag of all the tracks or the selected tracks with the track information as seen in the PC Music Library.

SO_NEW_DOCUMENT_ATT_SEND_API1:How to correctly attach a PDF file

I have an ABAP report that will send an email and attach the PDF file.
- convery spool to PDF : CONVERT_ABAPSPOOLJOB_2_PDF
- to send email : SO_NEW_DOCUMENT_ATT_SEND_API1
How I execute SM36:
1. SM36
2. Job Name
3. Spool List Recipient : select my own address as internal user (I didn't tick any of the check box for the general attributes)
When I go to TCODE SO01(SAP Inbox)
The attachment I see is just a link to the output of my classic ABAP view report, it's not a PDF File.
But I in SO01, I create a mail and attach PDF file, receive it my SAP inbox and can also open the attached PDF directly by just double clicking it.
Thanks.

Hi Jaime Cabanban,
Please find the Below Sample Program,
BCS_EXAMPLE_8
Thanks
Surendra

File Path and Name field does not display correct path

We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field inside our report and it displays the correct path when viewed inside Crystal reports:
C:\Program Files\reports\Chart.rpt
When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
How can this be corrected?
Thanks in advance for any assistance.

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

How to attach a text file as an attachment to email message?

Hello Everybody,
I have a .csv file, in which details about emp-id, emp-name, e-expenses for Reimbursement and email address are stored.
My application reads this .csv file, and sends a mail to each employee with his id, salary details in text format. (by changing content type to "text/plain") The code is working fine. But,
My problem is:
The message is sent as message body to the end user.
The end user / the person who receives this mail will not be a technical person. So,
1) If he trys to take a print out of this e-mail, He get only half of it.(as no. of colums will be more than paper size).
2) I am finding alignment problem. IF employee name is too big, other columns will shift to right and data will not be exactly under column header. (it is going in zig zag way)
So, I thought sending text file with all the details as an attachment might do well.
But, I don't know how to attach a text file to email-message body.
code
try
 { String s1="";
 File f1 = new File(the path);
 FileInputStream fstream = new FileInputStream(f1); //new
 BufferedReader br = new BufferedReader(new InputStreamReader(fstream));
 int count=0;
 while((s1=br.readLine())!=null )
 count++;
 //out.println("within while loop "+count);
 StringTokenizer st = new StringTokenizer(s1,",");
 if ((st.hasMoreTokens())&&(count>1))
 String a=st.nextToken().trim();
 String b=st.nextToken();
 String c=st.nextToken();
 String d=st.nextToken();
 String e=st.nextToken();
 String f=st.nextToken();
 String g=st.nextToken();
 String h=st.nextToken();
 String i=st.nextToken();
 String j=st.nextToken();
 String k=st.nextToken();
 String l=st.nextToken();
 String m=st.nextToken();
 String n=st.nextToken();
 String o=st.nextToken();
 String p=st.nextToken();
 String q=st.nextToken();
 String mail=st.nextToken();
 String s=st.nextToken();
 //out.println("b="+b+"c="+c+"d="+d+"e="+e+"f="+f+"mail="+mail);
 %>
<%
 String to =mail;
 String from =request.getParameter("fromadd");
 String subject ="Statement of Expenses";
 String smtp ="mail.xxxxxxxxxx.com";
 String message="";
 message=message.concat("EMP ID");
 message=message.concat(" ");
 message=message.concat("Name");
 message=message.concat(" ");
 message=message.concat("Dept No.");
 message=message.concat(" ");
 message=message.concat("Acc No.");
 message=message.concat(" ");
 message=message.concat("*****************************************************************************************");
 message=message.concat(a);
 message=message.concat(" ");
 message=message.concat(b);
 message=message.concat(" ");
 message=message.concat(c);
 message=message.concat(" ");
 message=message.concat(d);
 Properties props = System.getProperties();
 // Puts the SMTP server name to properties object
 props.put("mail.smtp.host", smtp);
 // Get the default Session using Properties Object
 Session session1 = Session.getDefaultInstance(props, null);
 // Create a New message
 MimeMessage msg = new MimeMessage(session1);
 // Set the From address
 msg.setFrom(new InternetAddress(from));
 // Setting the "To recipients" addresses
 msg.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
 /* // Setting the "cc recipients" addresses
 msg.setRecipients(Message.RecipientType.CC,InternetAddress.parse(cc, false));
 // Setting the "Bcc recipients" addresses
 msg.setRecipients(Message.RecipientType.BCC,InternetAddress.parse(bcc, false)); */
 // Sets the Subject
 msg.setSubject(subject);
 // set the meaasge in HTML format
 msg.setContent(message,"text/plain");
 // Set the Date: header
 msg.setSentDate(new java.util.Date());
 // Send the message
 Transport.send(msg);
 // Display Success message
 result =result.concat("<tr><td>"+b+"</td>"+"<td>"+to+"</td></tr>");
 }//end of if of hasmore element
 }// end of while loop
 out.println(result);
}catch(Exception e)
 // If here, then error in sending Mail. Display Error message.
 result="Unable to send your message";
 out.println("e="+e);
Any help will be appreciated.
Thanks and regards.
Ashvini

<html>

MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText("Your Messages");
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource("Your Attachments");
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
mp.addBodyPart(mbp1);
mp.addBodyPart(mbp2);
msg.setContent(mp);
msg.saveChanges();
msg.writeTo(System.out);
msg.setSubject(subject);
Transport.send(msg);

See you can add above code in your program and see the magic
Bye
regards--
Ashish
</html>

How do you attach a pdf file to a email in mailbox or gmail?

I am trying to reply to emails and attach a pdf file from my Dropbox on new iPhone 6. I only get option to attach a picture or scribble

Hello there,
Once you have created a PDF file with Acrobat.com, this file will live in your file organizer; if you select the file, you will have the option to download it. You can do this either while viewing the document (by clicking the "Download" button in the top menu bar) or from your organizer (hovering over the file name, you will see a little arrow; click it, and in the resulting menu choose "Download"). In both cases, you will be prompted to choose the location on your computer to which to save the file. Once you have chosen a spot, the file will be saved there.
Please let me know if you need any more information on this process.
Best,
Rebecca

How to attach a word file in JAVA mail? Please help

I am a JAVA rookie and I have problem attaching a word file using javamail. I searched almost all the forum but still couldn't find the solution.
Sorry for the reposting. But can anybody please help me out? Your any words or links will be highly appreciated!
Lakobe

If you want to include an attachment with your message, you need to build up the parts, quite literally, because the name of the applicable interface is Part. The content of your Message will consist of multiple parts within a Multipart object. Part one of the message is a BodyPart that contains the message content. Part two of the message is a BodyPart that contains the attachment. The attachment itself is specified as a DataSource. You don't have to actually read the attachment.
You start in the same way as you do for a message without an attachment. Create the message from the session and initialize the headers:
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject("JDC Attachment");
However here you need to create the Multipart object:
Multipart multipart = new MimeMultipart();
For part one, create a BodyPart and set the text to be a message. Then, add the BodyPart to the Multipart you just created.
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here's the file");
multipart.addBodyPart(messageBodyPart);
For part two, you need to create a BodyPart again, but this time you need to create a DataSource for the file.
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filename);
Use a DataHandler object to attach the data source to the message. Simply create a DataHandler for the source and attach it to the message:
messageBodyPart.setDataHandler(
new DataHandler(source));
Remember to set the filename of the attachment. This permits the recipient to know the name (and type) of the received file.
messageBodyPart.setFileName(filename);
Attach part two in the same way as part one:
multipart.addBodyPart(messageBodyPart);
And as a final step before sending, attach the Multipart to the Message:
message.setContent(multipart);

How to send file with original name through Mail adapter

I have to send file with original name as attachment through Mail Adapter. I am picking the file from FTP server through File Adapter. I am not using message mapping because files do not have any standard format.

Hi,
Have you solve your problem ?...
I have exactly the same scenario : pik up a file (file adapter) and send it in attachment by mail adapter without mapping (no IR)...
I activated Adapter specific paramters properties in the File adapter sender and i can see the FileName tag in DynamicConfiguration section of SoapHeader in SXMB_MONI...
I want to use MessageTransformationBean... BUT, how can i 'access' to FileName tag ???...
Thanks...
I setup modules like this :
AF_Modules/DynamicConfigurationBean 1
AF_Modules/MessageTransformBean rename
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
1 key.0 write http://sap.com/xi/XI/System/File FileName
1 value.0 message.FileName
rename Transform.ContentDisposition attachment;filename=message.FileName
rename Transform.ContentDescription message.FileName
rename Transform.ContentType application/csv-tab-delimited-table;name=message.FileName
But my file name attachment is message.FileName....
Edited by: Emmanuel JORAND on Sep 29, 2008 9:23 PM
Edited by: Emmanuel JORAND on Sep 29, 2008 10:25 PM

How can I create a mail attachment without a file suffix?

Hi,
I'm trying to create anl attachment without a suffix.
Here is my code:
               TextPayload attAnlFile = msg.createTextPayload();
               attAnlFile.setName("File");
               attAnlFile.setContentType("");
               attAnlFile.setText("Test");
               msg.addAttachment(attAnlFile);
               inputModuleData.setPrincipalData(msg);
I get a file named "File.bin", but i need a file, which is only named "File".
Can anyone help me?
Thanks a lot
BR
Ralf

Hi Ralf,
Ref: Receiver Mail Adapter
The attachements are given a .bin extension by default. To change this , the procedure is available in the Mail Adapter FAQ : 856599
Q: Can I choose the name of an attachment in the mail?
A: Yes. Most mail clients use some heuristics based on some MIME headers to derive the name of an attachment. The MIME headers involved in most heuristics are Content-Type, Content-Description, and Content-Disposition. When you create an XI message, the XI payload name is automatically set in the Content-Description. If you want to change or set all of these headers, you can use the MessageTransformBean module (Note 793922) in the adapter framework.
Related questions: How can I set the file name of a mail attachment?
Q: How can I set the file name of a mail attachment?
There are several MIME headers that play a role in how the client retrieves the file name of an attachment. Unfortunately, this behavior differs among various mail clients. The reason for this inconsistent behavior comes from the fact that this mechanism has been extended incrementally. The old way is to use the name parameter in the Content-Type header as specified in RFC1341. For example, you can set the content type of an XML attachment as:
Content-Type: application/xml; name="abc.xml"
RFC1521 discourages the use of this name parameter in anticipation of the new header Content-Disposition, which is defined in RFC1806.
With this Content-Disposition header, you can set the file name as:
Content-Disposition: attachment; filename="abc.xml"
Some clients may show the Content-Description value as the file name. The Content-Description header is typically used to associate some descriptive information to an attachment (RFC1341) as in
Content-Description: my xml file
To avoid potential interpretation problems, it is recommended to combine the use of these headers.
Also, the same note contains all info you wnat on the options of the mail adapter. Take a look at it.
Regards,
Jai Shankar

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

Tracking of Attached file by File name in display changes option

Similar Messages

Maybe you are looking for