Tracking of Bounced Mails

Hi Friends,
I am using Solaris outside a fire wall.
I have a program which send mails to the receipients by making use of javax.mail package.
The question is the mails are going perfectly fine but sometimes the mails are not going and I had also checked with the network at that time and it is fine.
Now, I would like to track all the messages which are not sent and why??
Where can I get those messages?
I had checked the root mail of my solaris machine and there are no bounced mails.
If it comes to the root mail is there any way that we can forward those mails to our personnel id's so that we can send them again>
Regards,
Shankar Medapati

Hi Jay,
Thanks for the concern...
We r using the SMTP Server for sending mails.
The problem I am facing is the SMTP properties I am using could not able to send mails to the receipients with addresses involving "co.in","@co.name.com",etc.
But the problem I don't understand is when I send mails from the development environment where my app server and mail server are within the firewall there is no problem,but my app server resides outside the fire wall and my mail server resides with in the firewall. Please tell me weather there are any other settings to be done in the app server or mail server to handle this problem.

Similar Messages

Where is the file that keeps track of which mail items were open?

Searching for the file that keeps track of which mail items were open- sometimes it suddenly is shorter, forgets some of the items of mail that was open, in my 'in box' as it were.
just happened to me- 15 emails I wanted to keep open till I answered them are now lost back in the mail stack
any idea where i can find that, retrieve from a backup done last week?
any trick to fixing this problem?
hope so
i gotta track down some of those emails, will be a huge chore to do it one by one
thanks

any idea where i can find that, retrieve from a backup done last week?
Good luck with that; it's not likely to happen.
any trick to fixing this problem?
You could just reply to the email right away, rather than putting it off until later, whenever "later" happens to be. Or, you could also put your emails that have not yet been replied to in a separate folder, and move them out into your Inbox when you have replied.
Mulder

Custom header reading of bounce mail

Hi,
When I send a mail to invalid mail address on gmail server, form the bounce mail able to read the custom headers using javax.mail api.
But when I send mail to invalid user on MS Exchange server, from the bounce mail I got, not able to read the custom headers using javax.mail. But the outlook shows (by looking at the option) the custom header is present. I think I may be missing some configuration while reading the mail from mail server using javax.mail. and not reading all the headers. (but its working with other email servers like gmail)

First, you need to understand that it's up to the
destination server what it returns, if anything, when
you send a message to an invalid address.
In this case, if sounds like the destination server has
returned a message that includes all the headers
you want to see, but you can only see them using
Outlook and not when using JavaMail.
Note that Outlook typically uses a Microsoft proprietary
protocol to talk to Exchange, so it's possible for it to
see and do things that are not possible using the
standard internet protocols that JavaMail uses.
You'll probably need to consult an Exchange expert
to see if there are configuration options that control
what information it makes available to internet
protocol clients in this case.

Osx10.7 bounced mail byte in mailbox

i keep getting admin bounced mail notification bytes in mailbox

Hi JCvanDamme,
I recommend you refer to the following article and it may give you some hints :
http://blog.kloud.com.au/2013/11/22/exchange-2013-dns-settings-cause-transport-services-to-crash/
Note: Microsoft is providing this information as a convenience to you. The sites are
not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from
the above link.
Best regards,
Niko Cheng
TechNet Community Support

How to identify bounced mails thru java mail??

Hi everyone,
I have a Javamail program through which I m sending and receiving mails. I want to identify bounced mails from the ones I receive. Is there a way in the Javamail API or the SMTP protocol to detect if the mail recd is a bounced one?? Some header or something???
Any inputs will be great...

There's no need to ask twice.
http://forum.java.sun.com/thread.jsp?forum=43&thread=176301

Bouncing Mail icon

Hi,
I feel silly- but I know someone out there knows this in a New Yors second!
I have a MacBook Pro - everything the latest. With "MAIL" - it used to be when I receive an email - the little icon in the dock bounced, along with the sound effect.
I zereoed my HD - reinstalled everything fresh - and now . . . NO bouncing icon.
I was kinda getting to like him, bouncing around excitedly - I feel like I've lost an old friend!
Anybody know how to get it to bounce when new emails arrive? Everything else, is fine. Is there a preference somewhere?
Thanks,
Larry

Hi Ferd,
Thank you for your response. It seems you are EXACTLY CORRECT! I hae a friend who works for Apple - if you're curious, he said this . . .
"Add a rule in your Mail preferences that can either be global for all new email or for specific emails. You can have it ignore the unimportant ones. The rule can be: if new mail received, then bounce mail icon in dock. As for sound that should just be the General preference for New Mail. You choose which system sound to use. Sometimes system sounds get funky, especially when using other sound sources sound editing/hacking software. This causes all system sounds to stop. You may notice trash not emptying or iChat not being audible for incoming/outgoing messages. To fix this, you need to open Activity Monitor app and force quit the coreaudio process. It'll auto relaunch and your sounds should be back.
Hope this helps,
M"
And this basically completely agrees with you! Thanks again - problem solved!
Larry

Can you disable the Bounce Mail confirmation?

I like the Bounce Mail function (although I wonder how effective it will be) but I hate having to confirm the command when I use it. Does anyone know if that can be disabled?

don't think you can.
hope this helps

I keep getting this message: Mail can't connect to the account: "Sbcglobal". Enter the password... So I do and it opens up, but later it will happen again. It's not earth-shattering, but I have to stop what I'm doing to get rid of the bouncing Mail icon.

I keep getting this message: Mail can't connect to the account: "Sbcglobal". Enter the password... So I do and it opens up, but later it will happen again. It's not earth-shattering, but I keep having to stop what I'm doing to get rid of the annoying bouncing Mail icon.

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

Clarification and Understand about bounced mail

Dear All,
Following is bounced mail. When mail sent from @bluefish.com domain to @silkways.net exchange mail server. Sender got the following bounce mail.
I want to know where is this problem and it is
@bluefish.com mail server problem or @silkways.net mail server problem.
Our exchange 2010 mail server and our domain is @silkways.net.
we hide original mail address!!
-----Original Message----- From: Mail Delivery Subsystem [mailto:[email protected]] Sent: Friday, December 27, 2013 10:23 AM To:
[email protected] Subject: Warning: could not send message for past 15 minutes ********************************************** ** THIS IS A WARNING
MESSAGE ONLY ** ** YOU DO NOT NEED TO RESEND YOUR MESSAGE ** ********************************************** The original message was received at Fri, 27 Dec 2013 03:07:44 +0100
----- The following addresses had transient non-fatal errors ----- <[email protected]> <[email protected]> ----- Transcript of session follows -----
Warning: message still undelivered after 15 minutes Will keep trying until message is 24 hours old
thanks,
Qamrul

Hi Qamrul,
As the error shows it's warning and a temporary error. The system will try to send again and will correct it
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected]

Bounced Mail Framework BMF - HELP!!

Hi SDN.
Could someone explain to me
how to use the Bounced Mail Framework with the Guided Procedures?
<b>please don't post links to the library </b>
(no rewards for these)
points for all the others!!!!

Hi Luca,
Check out these links. they shall be helpful to you:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/4f6e3c14a35dace10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/44/4509e4f1f014bce10000000a155369/frameset.htm
regards
Kunal Saggar
P.S. Award points if it helps you.

Bounced mail in trash?

I noticed recently that the junk mail I "Bounce" goes to the trash. What is this about??? Does that mean it's not bounced but rather sent to the trash?

I thought bouncing mail meant that it was like it never got to my computer
Only apparently, and only if the bounce is received by someone that doesn't know how to interpret header information:
http://www.by-users.co.uk/faqs/email/headers/
http://www.stopspam.org/email/headers.html
So should I stop doing this?
Definitely. Even though the bounce apparently says that the original message was sent to an invalid address, anyone looking at the headers can easily determine that the bounce was created by a mail client and sent from a valid address, rather than created by the mail server as a result of the destination address being invalid -- you can check this sending a message to yourself, then bouncing it, then doing View > Message > Raw Source on the received bounce.

Query on Bounce Management and tracking the return Mails

Hi Group,
I have a requirement to track the mails ( for Bounced Back mails, Soft bounce, Hard Bounce, and Emails read by the receipient ).
I got a table( SOOD ) to get all the Incoming mails from the mail reciepients but, not able to proceed further on this.
I checked for some info to track the kind of mail ( Hard/Soft/Read reciept etc., ) after running the Report "RSBCSIN", but could not get any clue to proceed further on this.
Could you please let me know how to proceed on this?
Thanks in advance.
Regards,
Vishnu.

Hi Group,
Any ideas over the previous postings?
Please do let me know if you have any idea.
Thanks in advance.
Regards,
Vishnu.

Possibility of tracking bounced mails

Hi,
I want to know if it is possible to track the addresses to which a mail was not delivered. I tried sending an email with invalid address (But, valid address format) in the recipients list and submitted the mail using Transport.send(message) method. The SMTP host came back with a DEBUG message "Message accepted for delivery", where my program lost control of sending email.
Does anyone know of a way to write a program which waits for the SMTP host to report back undelivered mails?
Thanks a lot.
- Sharma

Hava a look at
javax.mail.SendFailedException it is a subclass of MessagingException and it
provides methods to get an Array of Address objects for , invalid addresses,
valid sent and valid but unsent messages.
Regards,
TK.

How to Change Carrier for Package Tracking in Apple Mail 8?

When I receive a shipping confirmation email, Apple Mail automatically detects the tracking number and creates a hyperlink to USPS tracking. This is wonderfully convenient... if you live in the USA.
I live in Canada, so most of my packages are shipped with Canada Post. Naturally, USPS doesn't recognize the tracking number, so this feature is essentially useless. Is there any way I can change the carrier to Canada Post, or preferably to a universal tracker such as www.packagetrackr.com?
I was hoping Apple would address this with the release of Yosemite/Apple Mail 8, but I can't seem to find a solution. Any help would be greatly appreciated!

If you're talking about the sender name (the name that appears on the From line when you send email), to change it on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac (Command-Q) and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.

Mail Server Bouncing Mail

I am having a major problem since moving to 10.6 mail system. A lot of my mail is being bounced and never received, my logs are indicating this error,
NOQUEUE: reject: RCPT from mail2.onlineregister.com[207.66.2.58]: 554 5.7.1 <[email protected]>: Relay access denied;
This server still has 10.5 server on it's own RAID because I'm having to basically boot 10.5 up because that mail server works properly with no problems but I understand 10.6 has a completely different mail system.
Any ideas where how to troubleshoot, I have not made any DNS changes and set up this OS with the exact DNS info as previous so I'm stumped whats possibly configured wrong. I have read numerous threads on greylisting but is this cause of the problem, doesn't make sense to turn it off if it has a specific purpose.
server:~ srvadmin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
local_recipient_maps =
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
mydomain = mydomain
mydomain_fallback = localhost
myhostname = server.mydomain.ca
mynetworks = 127.0.0.0/31,10.0.0.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated hash:/etc/postfix/smtpdreject cidr:/etc/postfix/smtpdreject.cidr reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.mydomain.ca.xxxxxxxxxxxxxxxxxAD6F994791FF96FBE9962.cha in.pem
smtpd_tls_cert_file = /etc/certificates/server.mydomain.ca.xxxxxxxxxxxxxxxxxAD6F994791FF96FBE9962.cer t.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.mydomain.ca.xxxxxxxxxxxxxxxxxAD6F994791FF96FBE9962.key .pem
smtpd_tls_loglevel = 0
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
Thank you.

I made a couple of changes to the main.cf file.
Before:
mydomain = mydomain
mydestination = $myhostname, localhost.$mydomain, localhost,
After:
mydomain = mydomain.ca
mydestination = $myhostname, localhost.$mydomain, localhost, server.mydomain.ca
Now email from my work account are going through, at first I removed greylisting too but commented out the change and left it as default, still working but some emails are delayed which os ok,it's completely bouncing I'm concerned with. Time will see today as I have not been getting hardly an email which was unusual.

Tracking of Bounced Mails

Similar Messages

Maybe you are looking for