Tracking of Material Movement between two customers

Dear All,
We have already sold product to customer using SD Cycle.Being Non Moving at Customer end , Is it possible to trannfer to other customer? We don't want any accounting entry in SAP , But want to track serial number base material transfer.Also want to give warranty to new customer.
Pl suggest how to configure this senarion in SAP.
Regards,
Sanjay

We have already sold product to
customer using SD Cycle
Is it possible to trannfer to other customer?
I am sure, your comments fulfills the requirement of movement type 601 (normal sales) in which case, you cannot transfer the goods to other customer. If at all, you want to transfer due to non moving at customer end, from SAP point of view, you need to create a return order, do PGR, raise credit memo and redo the sales process to alternate buyer.
Here again all these can very well done but it will be documented in SAP.
We don't want any accounting entry in SAP
Sorry not possible in SAP
thanks
G. Lakshmipathi

Similar Messages

Material Comparision between two clients

Dear Friends,
We want to compare material between two clients. The material has same material characterstics in both client. Is it there is any std. functional module to search it? There is one FM i got CLS_SEARCH_OBJECT but it gives short dump at selectiont tab.
Kindly give me solution as it is urgent
Waiting for the reply,
Thank you,
Nilesh Shete

Hello Nilesh,
This is the first time that I'm coming across such a requirement of such a kind. You can easily compare the materials in two different systems. But within the same system it is difficult to compare between two clients, since the oncept of a client basically exists to separate the data.
One crude method is:
data: mara_1 type mara,
      mara_2 type mara.
data: client_1 type mandt,
      client_2 type mandt.
data : material_1 type matnr,
       material_2 type matnr.
select single *
from mara
client specified
into mara_1
where mandt = client_1
    and matnr = material_1.
select single *
from mara
client specified
into mara_2
where mandt = client_2
    and matnr = material_2.
check mara_1 eq mara_2.
I did not understand what you mean by "....same material characteristics.." do you realize that <i>characteristics</i> has a specific meaning in the context of a material in MM ? And if yes, are you referring to that ?
Regards,
Anand Mandalika.

WM- Material staging between two warehouses

Hi all.
My question is: is it possible to make material staging when warehouse in production order is different from raw material warehouse and raw material warehouse is managed by WM in two steps? I mean, confirming when it has been picked from origin warehouse and when it has arrved destination warehouse.
We need to transfer components from 0001-WM (raw material) warehouse into 0007 (production) and it is necessary to do it in two steps because most of the materials wait in a intermediate area. I thought in creating deliveries to use two-step picking but I don´t want to use purchase order (I am not sure if this flow is possible without pruchase order).
Is there any other choices to handle this process?
Many thanks in advance and best regards.

1 - Why the R/3 divided the material staging into two tab portions?
The first part obviously is for materials staged via pick parts. The second is a comprehensive list of materials that have to be staged from the warehouse irrespective of the type of staging.
2 - Can I use the LP10 and LP12 to manually perform material staging instead of directly via CO02 menu route?
You can use LP10 for staging pick part relevant materials. Typically, WM staging is triggered automatically however, you can manually stage either via CO02 or LP10. Note that LP12 is used for release order parts and it'd require the relevant control cycles that have 'release order part' indicator.
3 - Since our setup is using WMPP delivery, will LP10 and LP12 create delivery order as my understand is that LP10 and LP12 will create TR.
Since your staging set up is set via deliveries, LP10 will trigger the same.

Material Movements between location

Hi Gurus,
A Particular material has to be controlled to move/ transfer between particular location/Plant,
(For Ex Plant 1000, Material Glass, When i receive from customer as returns, i have to receive the material to the particular location, it should not be allow the user has to receive it in someother Location, FYI: i have 4 locations....
i have to do all internal transfer to all 4 locations
can you please help me to solve the issue,
please let me know if you need any further details
thanks
SP

I think what you are asking for is not much difficult and its a common scenario.
you just sit with an abper and find out while saving the return order which exit get called.
in sales there are so many exit so it will be very easy for an abper to find out which he can use.
logic will be "check the plant" while saving the return delivery. and Return delivery Type (ie sales document type) is your selection criteria. for ex return derlivery type for ex RN then u can put exit as if Rn then should not allow plant 1000 as receving point.
i am not having any abper with me otherwise i would have told u the exit name also.
Pravin Mukkawar

Error during Stock movement between two storage type

Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
Thanks

Dear,
Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip

Intrastat for goods movement between two plants

Dear All
I have question need your help.
Now we have two plants located in different countries, one plant is in NL (Netherlands), another plant is in DE (Germany).
And we transfer stock from NL to DE in SAP by MIGO(301). But actually this belongs to Import/Export business.
So we need to report to Intrastat system. So we need to do the intrastat declaration.
But could you tell me how I can realize the intrastat in SAP system.
Currently we manually do the intrastat.
Regards
Eva

For intrastat reporting you need to add a condition type in your pricing procedure GRWR.
Requiremnet routine 8 . Alct condition base value formula need to be created to read net value, if net value is zero then to read cost price.
Helpful links:
http://help.sap.com/saphelp_40b/helpdata/fr/2b/274520995111d1b4e30000e82d81b0/content.htm
http://help.sap.com/saphelp_40b/helpdata/en/34/60b19dae724effe10000009b38f91f/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/34/60b1a0ae724effe10000009b38f91f/content.htm
Document on configruation:
http://www.google.com/url?sa=t&source=web&oi=spellmeleon_result&ct=result&cd=1&ved=0CBIQhgIwAA&url=http%3A%2F%2Fwww.scmexpertonline.com%2Fdownloads%2FKees%2520Intrastat%2520download%25201-23-07.doc&rct=j&q=configurationforlegalreruiementsintrastat&ei=16n2S6HEEoqdlgfFlY2_CA&usg=AFQjCNFWXtBMAjyjJK9ZmxKuIj_3KEABaw
Hope this is helpful
Regards
Sai

Window movement between two monitors

Hello there.
I'm not sure if this question would be under Swing section or not... this is the best section I could match my problem with.
- I use two monitors on my computer
- Windows XP operating system
- JRE 1.6.0_16
- EIZO FlexScan L768 Monitors
When I drag a java swing application window from one monitor to the other, the java application window kind of gets stuck while moving, unlike any other windows based application. I thought it was something to do with my developed application. I noticed that it happens with other java swing applications as well. I tried using the [url http://download.oracle.com/javase/tutorialJWS/uiswing/components/ex6/MenuDemo.jnlp]MenuDemo. This example window behaves the same way - makes it difficult to drag the window from one monitor to the other smoothly.
I have ensured that I have the latest drivers for my monitors.
I do not see a reason behind this. Can someone help me out please.
Thank you.

I do the exact same thing but I have no problem.
You should post some code.

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Create one sales order for two customers

Hello to all.
I have to plan the following development. Our client can create one sales order for one material and can bill it between two or more payers.
In SAP you would have to create one sales order for each customer and divide the material proportionately between the customers. The doubt is if there is any development with user-exits,badis,... so you can create only one sales order with two "payers" partner functions; you would put a % of participation in each payment so the sistem would create two invoices dividing the total amount of the sales order between the payers.
Could anyone help me?
Regards

Tonnetti,
If you want 2payers to be possible in the same sales order, you have to include the material as two line items. Then go to each line item, the partners tab and then change the payer there. So now the header partner will have 2payers, and there will be different payers for each line item.
Now you can do a delivery or billing as needed. For a single sales order, two invoices will be created as the payers are different. These invoices can be send to respective payers and the payment can be processed from these payers.
Hope this helps for your scenario.
Reward if this helps.

Report to track interlinked movement of a material in a two step transfer

Request your input for the following
The scenario is that the stock transfer from one storage location to the other happens a two step transfer (313 and 315). To track the invenotry movements they want a report on a daily basis (gap of 24 hrs, 48 hrs etc) which can list down all the details at item level for materials for which the movement type 313 has happened but movement type 315 still needs to happen and the time gap between these two steps (i.e wether it has been 1 day or two days. etc.).
Is there is a standard report for movement types which are interlinked (like in this case 313 and 315 ) through which we can track what is the time gap between the first and second movement type and how much stock is waiting for the second step to happen before it can be avaialable to sell.
Thanks

Hi,
Refer report MB51
here in selection screen enter mvmt types 313 and 315 and execute
Here add following fields in layout;
Entry Data and Time of Entry and anlayse the time duration for the movements 313 and 315.

.avi movie with two audio tracks but QT only shows one

I have a .avi file. When I play it in the VLC Player I can choose between two different audio tracks (two different language tracks) but when I open the same file in QT I only get one track and of course it is the language I don't speak. Is there a way to get into this file and delete the track with the language I don't want so that when I open it in QT it plays the right track/language?
If you need more info please let me know.
thanks

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

I've set up two music libraries. How do I move between the two?

I've created two music libraries on my MacBook but I don't know how to move between the two. Please help?

Judygirl48 wrote:
I've created two music libraries on my MacBook
Why?
If you are syncing separate iDevices, you can use the same library and sync different content
I don't know how to move between the two. Please help?
Same way you created two library.
Hold Option. laucn iTunes but instead of selecting Create library..., select Choose library...

Relations Between MLCD table and material movements type

Dear all,
I Have a question about relations between MLCD table and Material movements. For Example We have a movement type Z71 when we did a movevent with tis movement type from MB1C Transaction. System creates a record in Mlcd Table. in this table Category field is VN and PCat field is V. How system decides about VN and V
is there any table which contains these conversions or is there any custimization in MM or CO modules ?
Could you please help me if you have any information about subject.
Best Regards

Hi Anupam
Thanks for your speedy reply.sorry i forget to mention i need FG materials details for given plant,production version,metrial type.In
MKAL i am not able to give material type as input parameter
Regards
Bala

Transition between two movies

I would like to add a transition between two movies in the
following AS3 script that otherwise works fine. Any help is
appreciated:
package {
import flash.display.MovieClip;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import fl.controls.listClasses.CellRenderer;
import fl.controls.ScrollBarDirection;
import fl.video.VideoEvent;
public class VideoPlaylistSeq extends MovieClip {
private var xmlLoader:URLLoader;
public function VideoPlaylistSeq():void {
// Load the playlist file, then initialize the media player.
xmlLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, initMediaPlayer);
xmlLoader.load(new URLRequest("playlist.xml"));
// Format the tileList, specify its cellRenderer class.
//Width and length of bigger thumb box
tileList.setSize(300, 515);
//Width for text box where thumb text is placed
tileList.columnWidth = 230;
tileList.rowHeight = 60;
tileList.direction = ScrollBarDirection.VERTICAL;
tileList.setStyle("cellRenderer", Thumb);
public function initMediaPlayer(event:Event):void {
var myXML:XML = new XML(xmlLoader.data);
var item:XML;
for each(item in myXML.vid) { // populate playlist.
// Get thumbnail value and assign to cellrenderer.
var thumb:String;
if(item.hasOwnProperty("@thumb")>0) thumb = item.@thumb;
// Send data to tileList.
tileList.addItem({
label:item.attribute("desc1").toXMLString(),
label:item.attribute("desc2").toXMLString(),
data:item.attribute("src").toXMLString(),
source:thumb});;
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
} else {
tileList.selectedIndex=0;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
// Select the first video.
tileList.selectedIndex = 0;
// Listen for item selection.
tileList.addEventListener(Event.CHANGE, listListener);
// And automatically load it into myVid.
myVid.source = tileList.selectedItem.data;
// Pause video until selected or played.
//myVid.pause();
// Listen for end of current video, then play the next
myVid.addEventListener(VideoEvent.COMPLETE, vidComplete);
// Detect when new video is selected, and play it
function listListener(event:Event):void {
myVid.play(event.target.selectedItem.data);
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
}

Let us know.
There are bluray menu limitations; they don't come up often, and I do not understand some of them. For example, there is a limit in Encore of 32 buttons per menu. (That does not appear to be a problem for you.) There is a limit to the size of all interactive graphics in each title (which includes a menu as a title). I don't understand that one.
I would do a test project, starting over, and building a less complex project that still has the essential features.
I have found Total Media Theater 5 to perform very much like a bluray player. But, yes, ultimately you've got to burn to a disk and test it on a bluray player.

Tracking of Material Movement between two customers

Similar Messages

Maybe you are looking for