Tracking RTU licenses on a AIR-CT5760-25-K9 controller

We purchased 2 Cisco AIR-CT5760-25-K9 Wireless LAN Controllers (we bought them as surplus used equipment)
We resold these 2 CT5760's to another reseller.
we were told that it currently has 0 active licenses and they want to return them
1.) Is it possible that the base 25 RTU licenses were transferred off the controller before this unit was sold as surplus?
2.) Could a reseller  transfer the base 25 licenses from Our CT5760 to a 3850? (without authorization)
3) Is there any way to see the license history on a specific CT5760 controller?
I want to know what happened to the licenses that were on this controller.
Finally,
4) Can I easily replace the licenses? we want to bring these back up to 25 active licenses on both CT5760-25-K9's
Bruce Miller
Washington Equipment Brokers
[email protected]

Hi Bruce,
I didnt go in to complete details ,getting confused.But here is what I know , License is transferable only between same type of devices. This comes as help when one device is dead and you receive an RMA.  5760 has RTU based licensing which is Right to use.  You can add any number of AP adder license up to the maximum capacity supported. You just need to activate or deactivate what ever number you want and then reload.
Regards
Dhiresh
**Please rate all helpful posts**

Similar Messages

  • How to activate FLASR1-CGN-2M= CGN RTU License in ASR1013?

    How RTU license works?
    How to activate FLASR1-CGN-2M= CGN RTU License in ASR1013?  

    Hi Somnath, I have in production my CGN but yet I don't see that license be  active with traffic, you have some idea because  this.
    RP/0/RP0/CPU0:#sh cgn nat44 NAT44 statistics
    Wed Feb 26 11:53:09.010 SCL
    Statistics summary of NAT44 instance: 'NAT44'
    Number of active translations: 16845
    Translations create rate: 67
    Translations delete rate: 63
    Inside to outside forward rate: 1982
    Outside to inside forward rate: 2270
    Inside to outside drops port limit exceeded: 0
    Inside to outside drops system limit reached: 0
    Inside to outside drops resorce depletion: 0
    No translation entry drops: 830608
    Pool address totally free: 0
    Pool address used: 256
    RP/0/RP0/CPU0:#sh license
    Wed Feb 26 12:48:57.034 SCL
    FeatureID: CRS-MSC-40G-IMP (Slot based, Implicit[Remaining time: unlimited]) 
      Total licenses 3
      Available for use         0
      Allocated to location     1
      Active                    2
      Store name             Permanent
      Store index               0
        Pool: Owner
          Total licenses in pool: 3
          Status: Available     0    Operational:    3
          Locations with licenses: (Active/Allocated) [SDR]
                  0/5/CPU0        (1/0) [Owner]
                  0/4/CPU0        (0/1) [Owner]
                  0/3/CPU0        (1/0) [Owner]
    FeatureID: XC-XLAT44-5M (Slot based, Permanent) 
      Total licenses 1
      Available for use         1
      Allocated to location     0
      Active                    0
      Store name             Permanent
      Store index               1
        Pool: Owner
          Total licenses in pool: 1
          Status: Available     1    Operational:    0
    Regards
    Ruben.

  • When was RTU licenses removed on 2801 routers

    Hi,
    Can any body help me find this.
    Which version of IOS did Cisco removed the RTU licenses on 2800 series routers or is it we can still use all the licenses i.e UC, SEC and DATA or do we have to buy it and will it be available as 2800 series is end of sale.
    Thanks.

    HI mohd, I believe because of the EOL the licenses would not be available any longer to purchase but I would still have to check to be sure please send me an email at [email protected] so we can assist you further

  • Multi track audio recording with ipad air

    Are there users of ipad air with a usb connecting adaptor and a usb audio device making multi track recordings?  I have had limited success doing this with my previous generation ipad and am wondering about the stability of eight-track recording on the ipad air. 

    Just thought I would let anyone who's reading this
    topic know that I have resolved my issue, it was to
    do with the Audio Configuration of Logic to the
    inputs from the MOTU. I went to Logic>Audio>Audio
    Configuration and configured it so that each track
    received from the respective inputs.
    You might want to mark the thread as "Answered".
    This will let anyone with the same problem know
    they might find there answer here. RIght now the
    thread is listed as "Unanswered". To do this click on
    the answered link at the top of the thread.

  • AIR-CT5760 and Prime Insfratructure

    hello
    i need to add AIR-CT5760 into PI - can anyone share some usefull docs how to do this?
    thanks

    You should share details on which is the PI version you are using, as 5760 is not supported on al PI's currently.
    Infact, only in PI 2.0. On how to add it from PI, you can check the procedure here :
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/gettingstarted.html#wp1058081
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • Licensing Options for .air (& .pdf) files?

    Hello,
    Does anyone have any ideas for licensing software for .air files that will be distributed?  Using .swf licensing option might also work. Most everything out there is for .exe, and is really expensive.
    I'm also looking for licensing options for use in PDFs that will be distributed.
    Thanks!

    Hi,
    I'd start here:
    http://www.adobe.com/licensing/
    (runtimes licensing and distributions)
    http://www.adobe.com/aboutadobe/antipiracy/faq.html
    (Acrobat family licensing/distributions FAQ)
    PDF is advertised as open format:
    http://www.adobe.com/devnet/pdf.html
    (PDF Technology Center)
    and other forum could help:
    http://forums.adobe.com/community/acrobat
    Generally speaking reading EULA-s for software you're using to produce contain help to find what software is used/components licensed for use with runtime/etc (so we could avoid patent trolls - while Adobe could be hit only - in theory):
    http://www.adobe.com/products/eulas/
    hth,
    regards,
    Peter

  • Can I use an apple keyboard and track pad with my iPad Air?

    How do I use my apple keyboard and track pad with my iPad Air?

    I did all that you suggest before and it didn't work.  So I waited a bit and tried again and it finally worked.  Not sure what the problem was as I didn't do anything differently.
    Thank you for all your help.

  • Can I exceed the license count on a 5508 series WLAN controller?

    Scenario:
    5508 WLC licensed for 100 APs. 
    Currently have 78 APs on the controller.
    Two buildings coming online this week, but there was a snafu with purchasing and license upgrade still in progress. 92 APs total between them.
    I looked at the license on the WLC, and in there it has something listed for 500, but unused, or something like that, along with my 100 AP license in use.
    I have never tried this, which is why I'm asking.  What happens if I power up all those new access points?  Will they join the WLC and run for 90 days or something to that effect?  What is that 500 AP license?  A demo?
    Thanks in advance.

    You are talking about the onboard factory evaluation licenses. You can put these in 'high' and resolve your deficiency while you get your perm licenses. 
    See below ..
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_011.html#d99529e920a1635
    Activating an AP-Count Evaluation License
    Information About Activating an AP-Count Evaluation License
    If you are considering upgrading to a license with a higher access point count, you can try an evaluation license before upgrading to a permanent version of the license. For example, if you are using a permanent license with a 50-access-point count and want to try an evaluation license with a 100-access-point count, you can try out the evaluation license for 60 days.
    AP-count evaluation licenses are set to low priority by default so that the controller uses the ap-count permanent license. If you want to try an evaluation license with an increased access point count, you must change its priority to high. If you no longer want to have this higher capacity, you can lower the priority of the ap-count evaluation license, which forces the controller to use the permanent license.
    Note
     To prevent disruptions in operation, the controller does not switch licenses when an evaluation license expires. You must reboot the controller in order to return to a permanent license. Following a reboot, the controller defaults to the same feature set level as the expired evaluation license. If no permanent license at the same feature set level is installed, the controller uses a permanent license at another level or an unexpired evaluation license.

  • AP with Clean-air Express and 3650 controller

    Hi,
    Is Clean-air express supported on the 3650 wireless controller with 1602e APs? The Clean-air options on the controller are available but do not seem to be active. In the controller gui the Clean-air admin status is disabled and the Clean-air operation status is down. I did confirm the Clean Air option is enabled on the config menu for the b/g/n band. Am I missing something here or are these AP's just not supported? Thanks!

    CleanAir Express is different than CleanAir. Express means that the AP does the function of detection, not the controller.  1600's & 1700's run CleanAir Express and you don't have the 100% functionality of CleanAir with these access points. 
    -Scott

  • How to track past activity on mac air 10.7.5 programs opened and eventual copy to usb

    hello ,
    how does one track all activity done on my macbook air 10.7.5 whilst on loan for few hours ?
    which programs were opened during the loan period ,
    and did they take a copy of documents on USB key during that time ?
    thank you
    Manu

    What is it you want:
    Do someone a favor and let him/her use your MBA?
    Okay, with your account password-protected and no shared folders or file sharing active, let him/her use the Guest account, or set up a dedicated new account with as many permissions or limits as you see fit (consider Parental Controls to limit app/web/whatever access). Other than that, trust him/her.
    Or leave it.
    Or, for whatever reason, spy out someone's activity?
    Don't do that...

  • Tracking technology license usage

    I am looking for ideas/samples of how other Oracle customers track the usage/allocation of their Oracle licensing. This is especially complicated with the technology since most of it is CPU based and must be monitored closely as environments are created/retired. I would like to associate IAS, DB, RAC, and other licensing to the server used, instance supported, and other data.
    I have searched for free-ware that I could adapt, but nothing really exists for this. It is all focused on searching desktops for local installs. Before I create my own spreadsheet/db tool I thought I would ask the greater Oracle community for ideas.
    Doug

    Hi Doug,
    I'll just start by saying that I'd like to see more posts like yours. Hope this will turn out a great discussion.
    OTN is missing a licensing-related forum currently (as far as I know). Even though it is a matter that really could use some community 'crunching'.
    We are tracking use and license metrics with help of a simple spreadsheet. For us it seems less complicated just because it is cpu/core/sockets based. I guess it depends on the environments and standards. (Keeping up with change in agreements and other such matters, on the other hand, seems harder.)
    For the big picture, the different license models and compliance tools is becoming a bigger issue to manage. (a full time job role)
    As a related matter.. with virtualisation it has become harder to manage the costs involved, if you want to charge (internal) customers per exact usage, and the distribution of costs for new investments (when crossing capacity borders).
    About that tool... I'd also be interested in hearing from the community...!

  • Track Software Licenses Sales in ERP?

    I'm looking at ERP software for a company that designs and assembles machines which include the software for free.  In the future, they plan to license the software instead.  Would you keep track of these software licenses in your ERP software or somewhere else? 
    If they decide to sell the software, it may come with 1 year of upgrades \ support.  It might be a license key or physical license file.  It'll probably be licensed per device but per user should be a possibility. 
    I'm currently coming up with a list of requirements for the ERP implementation and wondering what to ask\look for or if there is some other program that's typically used to track licenses?  Currently I'm looking at dynamics gp, netsuite, epicor, and maybe a few others.
    This topic first appeared in the Spiceworks Community

    Its Resolved.
    Using standard Sales Cycle in sap selecting without tax in sales order.

  • Can you please drop licensing fees for Air runtime on BlackBerry OS?

    BlackBerry is about to drop their built-in support of Air on BB10 operating system V10.3.1 and I am told it is due to the cost around licensing issues. Developers are being told to package their Apps as APKs with captive runtime and I would have no issue with that if it actually worked properly!
    APKs with captive runtime do not behave correctly, there are some weird bugs:
    Keyboard support does not work properly - I have a game that when packaged as an APK none of the keyboard buttons do anything on any BlackBerry with a keyboard. I noticed if I paired a BT keyboard, the arrow buttons work but nothing else...
    Whats the deal with keyboard buttons not working with Air captive runtime, yet it works with the Air runtime built into the OS??
    I'm aware the drop in built-in OS runtime support is pretty much a done deal, but can you at least fix bugs like that keyboard bug in your AIR runtime and prioritize this? There are loads of apps that are about to die in about a month or so due to issues like this and developers are getting fed up.
    Here is a thread on the BlackBerry forums where people are complaining: https://supportforums.blackberry.com/t5/Adobe-AIR-Development/It-s-OFFICIAL-Adobe-AIR-supp ort-dropped-from-10-3-1/td-p/2855618

    Hi ;-)
    1) I have used LR since V1 and since V4 this software along with ALL adobes software has been fiercely deteriorating.
    2) Adobe according to themselves ARE reading and responding to these forums... Unless they support pages are as bull as their "alleged" real human behind a chat ;-)
    3) I process around 30,000 images per week in Lightroom (paid work) and let me tell you at that amount of images... This app is not in the pro league... BUT it COULD be... If only adobe would test their software prior to embarkin on the PAYING public... Perhaps because so manu are using pirated versions of adobes software, they have stopped caring.. As a long time paying client I feel *****-slapped !@
    I do NOT beta test for adobe ! If they wanna get rid of their bugs, all they need to do is to contact me and add me to the list.. That will fix at least 100 bugs currently IN the ware... But I highly doubt that they beta test this software... If they do, they should REALLY skim thru their testers and relieve them of their duty - No personal offence meant !

  • Keeping track of licenses (WL6)

    Hi!
    Is there any way in WL6 (or WL5.1) to query which IP addresses are currently
    using the Weblogic server? (other than grep-ing the log file?)
    -K

    Hi Simply Dave,
    If you or your Nephew use Safari and the "Private Browsing" option available on Safari, it's almost impossible to track any downloads, any history, or any cache - it's designed that way...
    Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • AIR-CT5760-100-K9

    Hi, We have configured 802.11ac for 5GHz Antenna but we do not have any client which supports 802.11ac for now. We have only windows7 PC which supports only 802.11b/g/n. Please let me know how do i test 802.11ac and confirm if it is working. Is it possible to test it with any third party plugin which can be installed on Win machine and test it?
    Regards
    MAC       

    Hi MAC,
    Then you have to get a USB wireless adapter that will support 11ac. You should be able to find different products in the market
    Here is one product (I haven't test it myself, but should work)
    http://support.linksys.com/en-apac/support/adapters/AE6000
    On your 5760 802.11a/n/ac band you have to set the channel-width to 80MHz to support 11ac. Here is the CLI commands to do that.
    WLC5760(config)#ap dot11 5ghz shut
    WLC5760(config)#ap dot11 5ghz rrm channel dca chan-width 80
    WLC5760(config)#no ap dot11 5ghz shut
    Once you do this, you can issue the following command to see the what channel AP assigned. You should see 4 channels assigned to 802.11ac support APs in your network
    WLC5760#show ap dot11 5ghz summary
    HTH
    Rasika
    *** Pls rate all useful responses ****

Maybe you are looking for

  • Open Hub is not working after upgrade

    Hi Guys, I did an SAP BI upgrade from 7.0 to 7.3. The open hub destination was working fine before the upgrade, I could see the data coming in the file. After the upgrade, there is no data coming to the file. System says "no data available". Did anyo

  • Sending attachments to PCs

    My two brothers both have PCs (I think both are Dell). I recently discovered that whenever I send an email that has attachments, neither one of them even see the attachment option. One of them does not even receive pictures that are part of the main

  • Read Table with condition

    Hi, can i write a Read table like for example, read table itab into wa_itab with key matnr ne '4'. as its giving me an error. can suggest any other way to write the Read Table statement. Thanks in advance. Robert

  • Job Openings At Kimaya Automation​, Pune

    Kimaya Automation, Pune is looking for Two (2) Sr. LabVIEW Engineers Job description: Must Skills: Candidate should have 1-2 years of experience in  LabVIEW Should be familiar with cRIO. Should be familiar with NI hardware modules (PCI, PXI, cDAQ, cR

  • Multiple extproc entries in listener.ora

    Hello gurus and friends, I have two versions of Oracle (8.1.5 and 8.1.6) running on the same server. Is it possible to set up a single listener serving both instances to have 2 different extproc services with differnet locations for oracle home. If I