Tracking Tab is not coming in UWL
Dear All,
We are using UWL iview in the portal. This UWL is not showing Tracking Tab in it. How to show that tab in the UWL.
Thanks is advance.
Raktim
Raktim,
Go to System Administration > System Configuration > Universal Worklist & Workflow > Universal Worklist Administration.
Select 'Click to Configure Item Types and Customize Views Using a Wizard'
Select 'Customize the look of the UWL main page'
Then under 'Available tabs not displayed', choose 'Tracking' and then click on 'Add tab to view'
Hope this helps
Cheers
Craig
Similar Messages
-
Resp Person Tab is not coming in CJ20N for a particular project type
Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol PareekHey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol -
Cancelling the GR the excise item tab is not coming after flagging the OK
Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinhastill not cleared
-
In QM view Inspection Setup data tab is not coming
Hi Friends
I want to assign inspection type to a material, plant combination but in QM view Inspection Setup data tab is not coming
Thanks & Regards
GajendranathHi gajendra,
Inspection set up data in QM view will appear only when you select quality view & maintain any plant releted data at the time of material creation .If you dont maintain any plant releted data then QM view then insp set up data will not appear. so please o through mm01 once again select QM view & maintain plant data, then next time insp set up data will appear. -
Excise tab is not coming in MIGO
Dear All ,
pl help that as user is trying to do G.R wrt inb. delv , let me brief out user had made a qty contract with an import vendor itis having two line items , now an Rel order ( material ) is created wrt this qty contract., now as user is trying to do GR wrt inbound delv so for first line item excise tab is displaying & the ex. tab is not displying for second line item , even i had checked in J1ID for mat & chap i.d combination it is maint. here , pl guide what else to check.
rgds,
sap11The process is as below;
1. ME21N - Create Import PO
2. MIRO - Customs Invoice
3. J1IEX - Capture Bill of Entry
4. MIGO - GR w.r.t. Import PO
5. J1IEX - Post Bill of Entry
6. MIRO - Import Vendor Invoice
7. MIRO - Clearing Agent Invoice
Please check the following
Follow the exactly same process as suggested above.
J1ID - Maintain Excise Indicator as 1 and rest all Excise Details as "NA" for Import Vendor (Also check for Material & Chapter ID Combination, CENVAT Determination, Excise Tax Rates, etc...)
ME21N - Import PO should have a Zero % Tax Code.
Maintain Number range in J1I9 for objects.
Regards -
Req Assignment Tab page not coming for Service order
Hi All,
I am working on simple service order SM01 type scenario. where in i am entering the operation & time for the same.
Now when i am going in to operation detail screen . I am not able to find out the requirement assignment tab page.
Strangely when i am using same reference object & creating the Maintenance order PM01 & doing the same as above it is showing the req assignment tab page.
Regards,
AmarHi , I have found out the solution for the same.
I have found that the external scheduling flag is
set for order type SM01 in customizing. Since this is set, requirement
assignment tab will not be populated as this will be taken care
externally.
Remove the flag in below customising path.
Plant Maintenance and Customer Service--Maintenance and Service ProcessingMaintenance and Service Orders-Scheduling--External Scheduling--Define for Each Order Type
Once this flag is removed for order type SM01, this tab will appear
for service orders.
Regards,
Amar -
Not Urgent ..... Some GP processes are not coming to UWL
hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
<removed by moderator - please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] - they explain why you should not post"urgent" in here>
With regards
Shanto Aloor
Edited by: Mike Pokraka on Jul 14, 2008 6:52 PMHi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful. -
Tasks are coming but Notifications are not coming to UWL
Hi,
I'm able to see the workflow tasks in UWL but the documents from inbox are not displayed in notifications tab in UWL. Is there any configuration required for this.
Thanks
SwamyHi Swamy,
Check below thread's.
/thread/101970 [original link is broken]
/thread/1134072 [original link is broken]
Also do a search in SDN. This issue has been discussed many times.
Thanks,
Viji. -
Urgent ..... Some GP processes are not coming to UWL
hi,
iam initating a process using runtime.
And after completing the first action i am sending the next action to another user which is determined by input parameter.
But that process is not showing in the UWL,but it is coming in GP runtime.
The process is coming in the UWL for all users which determined at the time of initiation.
Pls help me it is urgently needed
With regards
Shanto AloorHi,
Have you created new system in UWL Administration (System Administrator -> System Configuration -> Universal Worklist u2013 Administration) with Guided Procedures Connector?
If no, check these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/content.htm
Otherwise, check Delta Pull Channel Refresh/Snapshot values (edit in GP system).
Reward points if itu2019s helpful. -
IN F-43 tax calculation tab is not coming
hi
In F-43 tax tab (Enter/display tax item) is coming but when i gone for calculating that no tab for calculate.
so to get a calculate tab in f-43.
Thanks Inadvanceissue is solved thing is that; After entering the expense account (That is liable to tax) give tax code and click on overview button and then only click on tax then the calculate tab will come
Issue solved -
Release strategy tab is not coming in SES
Hi All,
I am facing a issue where I have created an SES, and release strategy is assigned to this SES. Problem is somehow the user is not able to see the release tab when he go wants to release the SES. The release tab is missing from the SES.
Am sure somebody has faced this kind of issue and have any idea how to correct this.
ThanksHi,
The direct reason that there is no release icon available in ML81N
is inconsistency in the field ESSR-FRGRL for affected SES's.
This field should be filled with 'X' as all those SES are subject
for release.
Have you changed customizing for involved release strategy recently ?
If a relase strategy is created with a certain name and documents are
created with respect to it afterwards, this release strategy should be
changed then IF AND ONLY IF a NEW name is assigned to it as well. In
other words, if such a strategy is already use, it should be RENAMED
before applying the desired changes.
Otherwise you will run into the observed inconsistencies when trying to
edit documents which were created BEFORE the strategy was changed
(since the system at some point always checks the NAME of the strategy
to be changed, NOT the content).
So if this case happens only for already created SES a good solution
for it is to delete affected SES and create a new one with changed
release strategy.
I would delete affected SES and create it again.
It seems to be the fastest way to resolve this issue.
If you need a correction for this inconsistency issue, please open a SAP ticket for your problem.
Regards,
Edit -
GP Work Items are not coming in UWL after refresh the cache.
Hi All,
We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
Any Idea.??
Thanks
DheerendraHi Dheerendra,
Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
Also check whether the GPWorkItemProvider Web Service is working.
Regards,
Ajay -
Notifications not coming to UWL
Hello All,
I have created a system object for ECC in portal and have registered the system alias for UWL as webflow connector and as alert connector.
In ECC, we have implemented new workflow. It is getting triggered successfuly from portal.
Even I can see tasks are getting populated correctly in UWL.
But I am unable to see the notificaions that are being sent by workflow. In backend these notifications are present in users inbox as documents.
How to populate these notifications in UWL?Hello Andreas,
Thanks for the reply.
Meanwhile I noticed that under Tracking, items are getting generated. When I click on View History of those items, I am able to see current status of the workflow.
Is this the way standard notifications are seen without using SONIC? -
Document Browser Tab is not coming in CV01N,CV02N,CV03N.
Dear Expert,
can anyone guide me for getting Document Browser Tab in CV01N,CV02N,CV03N. i have activated the Browser flage in DCSWITCH(Browser ACL Customizing Switch).
Regards
Bhuwan TiwariHi Bhuwan
Go to SPRO>DMS>Control Data>Activate Browsers and ACLS.
Tick the relevant selection.
When you go to CV01N and press Button Select Document Via ( Ctrl + F7 ) you get new browser .You can togle between two browsers.
With Regards
Mangesh Pande
Edited by: MANGESH PANDE on May 11, 2009 7:57 AM -
Hi KM Gurus,
Could anyone tell me how to get information about an EBP PO status in the tracking tab of the Portal's UWL?
The tracking tab does get populated when a Leave Request is sent through the approval workflow.
However, none of the approved, rejected or completed workflows are reported in the tracking tab.
Your help will be greatly appreciated and suitably rewarded.
Thanks & Regards,
VibhuI have a similar issue. If a user starts a workflow, then it appears in the tracking tab of the UWL however, if a user just executes i.e. approves/rejects a workflow then nothing shows up in the tracking tab.
My finding was that the tracking tab in UWL points to OUTBOX in R/3. Whenever, a user starts a workflow, it gets populated in OUTBOX as well as the subfolder WORKFLOWS STARTED BY ME therefore it shows up in the UWL tracking tab. But when a user just executes the workitem, then it only gets populated in the subfolder - WORKITEMS EXECUTED BY ME. The OUTBOX is blank and hence UWL is also blank.
Now in my personal office settings, I do have the COPY TO OUTBOX checkbox checked. So, not sure whats the way out here..Any help will be appreciated..
Maybe you are looking for
-
Email not triggered in Campaign execution
Hi , I am facing issue in while triggering Email in Campaign scenario. Executed below steps: - Create Target Group having 3 number of BPs - All BPs have correct data like Email address etc. - Create Mail form and insert URL for Questionare Survey - E
-
hi desperately need help. my iphone 3gs is stuck in recovery mode... when i try and do the restore via itunes it goes through the motions but when it gets to the end it tells me there was an error and it couldnt be restored... originally it was an
-
ISO 4 will not install in my 3 year old touch
I have been trying to install ISO 4 for almost a year. The process gets stuck on "Backing up Ipod Touch". I let it go several hours and it didn't progress.
-
JMS - remove persistent messages from memory
Hi, I have a problem with RAM and JMS. I have to store many JMS-messages (overall size of more than 2GB). By default they are stored in RAM and in the database. How can I configure WL not to store all messages in RAM.
-
Removing margins and borders in html
Hi all, I've been tearing my hair out for about a number of hours now. I'm looking to remove the borders/margins from a captivate project being run in a browser. This is because the captivate file only just fits on 1024 x 768. So the border causes ma