Tracking the delivery status of order number: *******

Shipment 1
Available to ship: Within 24 hoursDelivers: Jun 18 by Standard Shipping
iPhone 5s 64GB Gold (GSM) Unlocked
$849.00
4
$3,396.00
Payment
Billing Contact
TIWANA ******
Billing Address
Please update the status of this order arrange delivery on 18 Jun,2014 already or hold the shipping
<Edited by Host>

Very good ,now do you have a technical question for this USER Forum

Similar Messages

  • Sales order as complete and change the delivery status.

    Hello All,
    We  produces an order but then the customer calls and does not want the material so we in turn will scrap the material against the production order using transaction MB1A mvmt type 951 E. 
    Since the material were scrapped and no material were shipped against the sales order, the sales order u201Coverall statusu201D remains open and the delivery status is u201Cnot deliveredu201D.
    To close the order  we u201CRejected line itemu201D and moved on.
    I would like to know if there is another way we can set the sales order as complete and change the delivery status. 
    Regards
    Amit

    Hello,
    you can use the status profile for the same. but a better way would still be to use the rejection reasons . the rejectionr reasons are very well integrated with the document flow as well as transfer of requreiemnts to Production
    so a best practise would be to use rejection reason
    hope this helps
    Thanks
    akasha

  • Sales order item ontime delivery status at order level in Cube

    Hi Guys,
      We have a requirement, currently we have sales order item information in cube where we have some thing called OTD status
    this status is based on actual GI date and requested date so we have 3 staus at each sales order item level ontime, early, late
    but now the requirement is to change the order status either to ontime or late and this status should be at order level instead of
    order and item level, if any one item in order is late then the whole status of order should be late and if on time or early then it
    should be ontime, is there any why to achive this except adding new character in cube or creating new object in system???
    or if not by just adding new character in cube like order status by remodeling and populate data with customer exit?? pls note
    that we are not using 2lis_11_VAHDR we are using 2lis_11_Vaitm only.
    thanks,
    chandra.

    hi Chandra,
    We had similar kind of situation. but you need to implement the logic either by remodelling or creation of new object.
    What we did was as under.
    - Created new DSO with just Order no and the status.
    - After VAITM Delta load - by making it datamart we forwarded the data to that DSO and had the Status logic put up there so you dont need to change the existing model and you have the status at order level in other DSO.
    - this DSO was than included in Multiprovider for further reporting puprose.
    -This way you have very less things to manage and no need to further enhance exisiting model. This status logic may change in future and you have flexibility to do so easily in the system.
    Hope this helps.
    Regards
    Raj

  • How Serial Number of the material can be used to track the current status

    Hi,
    I want to know how we can use the serial number of the materail to track its current status. i;e i just want to enter serial number and system should display its current status, whether the materail has been returned, delivered etc.
    Is it possible to know.
    Thanks,

    VK,
    We use serial numbers for tracking purpose. We can track at the document level
    Function Module GET_SERNOS_OF_DOCUMENT can be used to retrieve serial numbers corresponding to any of the following documents.
    1.  Delivery
    2.  Sales order
    3.  Material document
    4.  Inspection lot
    5.  production order
    6.  Internal Handling unit
    7.  Physical Inventory document
    TO see the status of Serial no. you can use Tcode IQ02 - Where the status will be To Stock , From Stock, To Customer, From Customer, Delete Assign to HU, Delete Inv Assign.
    Regards
    Sathya

  • How to update user status in CRM Order depending the delivery status in R/3

    Hi All,
    In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
       Let me describe you clearly:
    Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
    I need the user status should change in CRM only when the entire deliverytakes place in R/3.
    Thanx
    Chinmaya

    Whenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
    If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status.

  • SD-How to find table link of special delivery and sales order number?

    Hi Experts,
    I have a requirement as below.
    In LIPS table (SD document: Delivery: Item data), in this table has one kind data.
    One record has maintianed 2 fields PSPNR(Project definition (internal)) and PS_PSP_PNR(Work Breakdown Structure Element (WBS Element)).
    How to find sales order number of the above record? Could you tell me which table link the delivery item data and sales order number?
    Thanks a lot,
    Frank

    hi,
    check this.
    [https://forums.sdn.sap.com/click.jspa?searchID=20150250&messageID=3784069]

  • TS1135 I have submitted 3 orders and don't know which order has the problem.  None of the ones have this order number.  Help!

    I have sent in orders for 4 picture albums.  One has been delivered and the other 3 are pending.  I received notice that one couldn't be sent and the order number in the email does not match any of my order numbers.  Which of my books could not be sent?

    Go to the Apple store (store.apple.com) to your account and look at the status of your outstanding orders
    LN

  • BADI to track the use status update

    CRN 7.0,  I have requirement to call smartform when the user status of the item for the service quotation changes to complete. Is there any BADI to track the item user status?
    Thanks

    Hi,
    You can very well read the changed status in ORDER_SAVE by calling the FM CRM_ORDERADM_I_STATUS_READ_OW or CRM_ORDER_READ which gets u the statuses from the buffer and the already saved status can be read from the database.
    Hope it helps.
    Regards
    Sidd

  • How to monitor the progress of an ORDER Number

    Hi,
    How can I Monitor the progress of an order from the EBS.
    Thanks
    Asis

    I assume you mean sales order.
    You can open the order header and go to tools > workflow status.
    It will show you when the order was entered , was booked and closed.
    You can also see details of all lines for the order.
    If you want to see status of a line, You can also go to line and go to tools > workflow status
    It will show you when it was entered, when booked, when it was progressed to next stages, and closed.
    Hope this helps,
    Sandeep Gandhi

  • How can we track the lost iPad by Serial number or  IMEI, MEID?

    Hello
    I lost my iPad Air WiFi CELL 128GB Silver ATT (No ATT Service) and accidentally  did not turn lost my iPad and also erased my iPad and now I could not use find my iPad any more. Do we have any web site or app to track the iPad by serial number or IMEI, or MEID? Anyone please help.

    Sorry to hear it but unfortunately it can't be tracked this way, you can only have At&t block service to it and submit the serials to law enforcement in case it was stolen and somebody tries to take it to a pawn shop. See Apple's support article:
    If Find My iPhone isn't enabled on your missing device
    If you didn't turn on Find My iPhone before your device was lost or stolen, you can't use it to locate your device. However, you can use these steps to help protect your data:
    Change your Apple ID password. By changing your Apple ID password you can prevent anyone from accessing your iCloud data or using other services (such as iMessage or iTunes) from your missing device.
    Change the passwords for other internet accounts on your device. This could include email accounts, Facebook, or Twitter.
    Report your lost or stolen device to local law enforcement. Law enforcement might request the serial number of your device. Find your serial number:
    On the original box or receipt
    On My Support Profile (supportprofile.apple.com) if you registered your device with your Apple ID
    Report your lost or stolen device to your wireless carrier. Your carrier can disable the account, preventing phone calls, texts, and data use.
    Find My iPhone is the only way that you can track or locate a lost or missing device. If Find My iPhone isn't enabled on your device before it goes missing, there is no other Apple service that can find, track, or otherwise flag your device for you.

  • How to change & see the PO Status (Purchase Order Status) ?

    Hi Everybody,
    I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
    Please help me out asap.
    Thanks & Regrds,
    Nagaraju Maddi
    Message was edited by: Nagaraju Maddi

    Hi ,
    It is possible to Update the Pricing procedure in Old PO. For this what you need  to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
    Hope this will help you
    Best Regards,
    Pradeep Naik

  • BAPI For Inbound Delivery using Purchase Order Number

    Hi All,
    Is there any BAPI for posting Inbound Delivery (VL31N) using Purchase Order as reference.
    thanks
    bobby

    Not sure what it has to do with enhancements and modifications, but there is no such BAPI:
    http://tech.groups.yahoo.com/group/ABAP/message/38307
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/bapi-for-inbound-delivery-creation-and-update-vl31n-1201265
    FYI all BAPIs may be viewed in BAPI transaction.

  • Table name for tracking delivery and sales order

    Hi,
         What is the table and field name for tracking the delivery and sales order in SD
    Regards

    Hi,
    If you want the DELIVERY DOCUMENT individally you can get it from the LIKP-VBELN
    In the same way the SALES DOCUMENT from VBAK--VBELN
    If want to get the DELIVERY DOCUMENT AND SALES DOCMENT from the VBFA with the Sbsequent document category
    M is the subsequent category for BILLING
    j                                                       DELIVERY
    regards,
    santosh

  • Sales Order -- Update the delivery Document Credit status using FM or BAPI

    hi All,
    The requirment is quite urgent......  Actually i am Using a userexit V56FSTAT through VT02N and want to update the credit status through VKM4 Transation. But i require a Function module or Bapi to Update the credit status of the delivery status.
    Please do give me suitable Function module or Bapi through which i can perform the VKM4 transation to update the credit status of delivery document....

    when we go to vkm4 there we click on the reassign button and save then the status is changed in VBUK table....
    so i have to perform this steps through VT02N transation....
    Ny ways thanks for the reply,
    i guess i require more support fom u all
    Message was edited by:
            siddharth samal

  • Delivery status of a sales order

    Hi,
    I have a requirement wherein I need to extract the delivery status from a sales order.
    VA03 --> Header Info --> Status
    In this screen you have the various processing status. From that I need to pick up the delivery status.The corresponding field data is VBSTT-LFSTA_BEZ.
    Since this points to a structure, I am not able to find out a way to get this value.
    Kindly help.
    Thanks,
    Raj.

    give the vbeln number in table VBUK
    check 
    the status for delivery as
    A /  B / C
    A not processed
    B Partially processed
    C completely processed
    GBSTK ne C will be overall processing status
    LFSTK ne C will be for delivery open
    regards,
    vijay

Maybe you are looking for

  • Multiprovider error

    Hi all, I am creating a Multi Provider (Z_M05) on top of a Cube (say Z_C05). While activating it it gives error message " Compounding Consistency of the Info Object xxxx not ensured". Can anyone suggest what could be done to solve this issue. Thanks

  • 10.5.7 Faster and 10.5.8 Even Faster!

    I have to say that upgrading my really old first gen PowerMac G5 (dual 2.0GHz, June 2003 model) to 10.5.7 brought a real jump in interface speed. 10.5.8 is even better! I said when 10.5.7 came out that it was like getting a new faster Mac for free. W

  • Expecting the output in specific manner by using sql query

    Right now i am executing the query that is showing an output like this FILTER_CATEGORY NAME alarm     orgObjectTypeRaw alarm     eventType obj_alm     OSS_NAME obj_alm     TYPE obj_imp OOF INDICATOR obj_imp     PORT TYPE obj_nwk     OSS_NAME obj_nwk 

  • Concurrent mode failure - CMS & RMI

    Hi, I've been struggling with this concurrent mode failures for quite some time and I would be very nice if somebody could answer some more or less basic questions: 1.) If I scedule a full gc when using CMS do I get an concurrent mode failure? In my

  • Unable to sync iPad and iPhone 6

    I have had an iPad 2 for over 12 months and several iPhones I have just upgraded to a 6. Although I had to reset a couple of times I did get the iPhone 6 to sync but now I want to alter what is on my devices but I cannot get either the iPhone 6 or th