Tracking Transports for confi/dev overwritings in sap srm system

Hi, could anyone please suggest the best way to track and identify any code/config overwritings due to any new change being transported into the client under a new transport?
in m previous organization we had a custom developed tool for identifying such potential overwritings in ecc system however for SRM system it did not work.
could anyone please suggest an automatic/manual check by which i could be able to identify if any new change will potentially overwrite any existing setting in the SRM system
Thank you

Hi Parikshit,
Please make use of Solution Manager 7.1 BPCA tool.Using this tool you may be able to identify which part of the business solution may get impacted with a new change.
This tool can work in any SAP solution including ECC, SRM , BI, CRM etc. but it requires certain pre-requisite configuration to be done in Solution Manager.
Refer SAP help for more details on BPCA
http://help.sap.com/saphelp_smehp1/helpdata/en/e7/ae57e0291149adaca93a9dcce33abb/content.htm
Wiki Link :Business Process Change Analyzer(BPCA) - Solution Manager - SCN Wiki
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

Regarding access key for modify predifined fm in SAP IDES System

hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.

Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya.

What is the best approach to capture TBOM's for a SAP SRM system/functionality?

Hello SCN Community,
It would be much appreciated if somebody could share some information about the following....
What is the best approach to create TBOM's for a SAP SRM system? The SRM functionality is basically consisting out of multiple ABAP Web Dynpro's that are connected as a process via a SAP Portal (as is understand it). The entrypint to the SRM functionality is via the SAP Portal.
Do I first have to create a link to the Portal via an SAP Web Application link in SOLAR01 and then start recording? Will it record only the portal objects or also the ABAP Web Dynpro objects?
Do I have to list all the separate ABAP Web Dynpro's in SOLAR01 and use those as a starting point?
I am myself more familair with more classical SAP ABAP ECC systems and transactions. I could hardly find any information on the use of BPCA and the required TBOM's in the area of SRM.... Any help would be much appreciated!
Kind Regards,
Guido Jacobs

Hi Guido,
today was a new blog released, maybe this helps:
BPCA - Powerful Risk Eliminator
Best Regards,
Christoph

How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.

Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki

Get statuses of SC items - SAP SRM system

Hello guys
I would like to ask you for help.
Let suppose following situation in SAP SRM system
Approver received SC (shopping cart) with 2 items for approval. He marked first item as rejected, second one as approved. Then clicked submit.
I need to add a piece of a code to the code which handle click on the button submit. In this code I need to know which items were rejected. I tried to insert the code to implementation of the interface method
IF_EX_BBP_DOC_CHANGE_BADI~BBP_SC_CHANGE.
I used method
/sapsrm/cl_pdo_factory_sc_adv=>get_instance
which returns object
ro_instance
and then I called object's method
/sapsrm/if_pdo_do_apv_ext~get_process_info
which return structure
ls_wf_info
In this structure I was only able to find requested information (states for each item of SC) only when no operation was done on SC (it means only after code, which handle clicking on submit button, was executed).
Can somebody help me how to get information for each item of SC?
Edited by: jozef.gloncak on Jan 18, 2012 2:28 PM

Hello Jozef,
we have the same problem.
Can you provide your solution for the problem?
Thank you in advance.
Regards,
Florian

*Error retrieving some or all of your defaults from the SAP SRM system*

NULL Value in field when user tries to update their MYDEFAULT personal details in the MYBUSINESS webportal
http://imageshack.us/photo/my-images/62/mydefaults.png/
Error retrieving some or all of your defaults from the SAP SRM system
SAP 640 GUi on WINXP
any ideas?

Hi,
Are you enable POP account in internal Exchange server or using POP from ISP outside?
Check File > Accounts Setting > Email > Select this account > Change > More Setting... > Outgoing Server tab > Check the first box: My outgoing server (smtp) requires authentication and don’t circle: Log on to incoming mail server before
sending e-mail.
If you are using check the LDAP, please also check the server address is correct or connection port is right.
If there is nothing wrong with your client. The problem could be on the mail server. Sometimes it could be due to maintain of the mail server of your recipient, and it is not available . You can give a try other time. If still failing, very possible the
email is no longer available.
Please let me know the result and feel free to post back.
Tony Chen
TechNet Community Support

Error importing SAP Transports for BO XI 3.1 SAP integration

Hello,
The basis guys setup a clean sap installation on basis v7.0 for me and i managed to import all 5 of the unicode compliant versions of the transports perfectly.
Through the client tools and crystal reports i can access all our custom tables.
However as it was a clean install there is no data. I therefore tried to import the same transports into our dev system. This is on basis version 6.4.
Again i copied the co and data files across and tried to import the transports.
Im getting an error at the 'error in Import ABAP Dictionary Objects' phase for transport K900531.R21. It manges to import into the first 20 objects, then this error is raised???
Start import R3TRTABLZSSAUTHREF ...
===> HALT: Internal error in tw_lzh (twtrans.c line 7744). Please contact the SAP support.
Dictionary import
End date and time : 20090617143327
Ended with return code: ===> 16 <===
The basis guys are puzzled - has anyone seen this before???
Many thanks
C.

Hi,
Yes - this is the first transport in the series - the Open SQL one. In fact today i downloaded the 3.1 installer as the transports i tried were 3.0 ones.
I still get the same error at that particular object with these newer transports. I even tried teh Ansi transport even thou our system is above Basis 6.2 and it failed at the same point.
I feel their must be a problem with that object in our system.
I just wondered if others had problems importing those transports?
Thanks

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Generate PI alerts for Runtime exceptions in other SAP ERP system

Hi All
We usually get alerts in PI Alert inbox.
For some specific interfaces, we will need to raise an alert to other SAP ERP system user.
Is there anyway generating this kind of exception?
Thanks
Sai
Edited by: Sai Krishna on Jun 30, 2008 3:08 PM

Hi Sai,
There are 3 ways you can do this.
1) Like VJ said "sending an Email using mail adapter from with in a BPM" Which will be a little complex and preformance wise may be slow but sounds neat .
2) Use the Work Flow WS71000002 ( AlertSendWf ) to capture and trigger a RFC or a Mail to the concern system
For this you will require the services of a Workflow guy; but this will be fast and recommended if the error are being caught in a SAP to SAP landscape
3) You can use this link to generate a group email this is what I have implemented in our landscape
http://sapdocs.info/wp-content/uploads/2009/01/alert-configuration-in-xi.pdf
Regards
Gagan
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM

For Connect MS-Access to SAP - XI System , what Driver is required?

Hi all ,
There is a requirement to connect Microsoft ACCESS Database from SAP XI System. To achieve such scenario first basis needs to deploy the required vendors Database Driver on SAP XI System.
So Please tell me what drivers need to deply for Microsoft ACCESS DB Drivers on XI System , to achieve such scenario.
I am following a document whose name is How To Configure External Drivers for the JDBC & JMS Adapters.
MY PI System is PI 7.0 and on Windows Server 2003 standard x64 Edition.
MS-ACCESS is on normal PC with XP on it
Regards
PS

Hi,
What’s the error message you got? It seems that you haven’t install the correct driver for access the .xlsx file. Please download and install 2007 Office System Driver: Data Connectivity Components from below link to check the issue again:
http://www.microsoft.com/download/en/confirmation.aspx?id=23734
Besides, to change a .xlsx file to .xls file, we should open the .xlsx file, then click ‘Save As’ button under File pane, and then select the appropriate location and ‘Excel 97-2003 Woekbook(*.xls)’ as type for the file. Then we directly use the new .xls
file as the source in SSIS.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Need help for the message flow in sap xi system?

Hello All,
My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
Client is not giving me the system details ...like network details and i need to say that can we send 8500 messages in the existing system with out changing the process speed or data base.
also please advice the best ways to increase the performance in the sap xi system when the message flow is huge.
thanks in advace.
Thanks and Regards,
chinna

>
chinnasapxi wrote:
> Hello All,
>
> My requirement is some wat different............in the existing production system the message flow is 3500 per hour......... now we want to develop new scenario and the message flow will be 8500 message per hour.
> chinna
3500 to 8500 is not a message count tht needs to be worried about
but to be on the safer side what is the average size of a single message?
if the size is not a significant one u can go ahead

Vendor Master can not replicate from SAP R3 to SAP SRM system.

Hi All,
We face one issue when we use bbpgetvd program to transfer Vendor master from SAP R3 to SAP SRM, after I check Analysis Application log, found the following issue:
Error: No Bank Master Data Maintained No Bank Data Transferred
Error: Name/Address for Vendor Already Exists Vendor: 0015118743 Address Number 0000054208
Error: Warning: Complete Business Partner: Vendor: 0015118743 Backend: APP002TS No Transfer of Vendor Data
But I check BP in SRM and can not find vendor 0015118743 information, so could you give me any tips or suggestions to fix this issue. Is there any table in SRM system to keep Vendor Master like SAP R3?
Thanks for your kind suggestions or help in advnance!

Hello Gavin,
>
Gavin Feng wrote:
> (...)
> 1. How to use BP to find business partner by address num 0000054208, I did not find this search condition.
> (...)
You cannot.
Business Partner are stored in BUT000 table. I don't remember if its address number is also stored in this table.
If yes, link is done directly between both.
If not, this is the person number which is stored in BUT000. So, use your address number to get its corresponding person number using ADCP table. Then, with this person number, check in BUT000 what is its corresponding Business Partner.
Finally, with its corresponding GUID, check in VENMAP table the vendor number.
>
Gavin Feng wrote:
> (...)
> 2. I used VENMAP and ADRC to check vendor 0015118743 and address num 0000054208, but there is no record in both table, so why the SRM system generate information that is "Name/Address for Vendor Already Exists".
> (...)
See my answer above concerning ADCP table.
Regards.
Laurent.

Create Purchasing Contracts on SAP SRM system

Hi all,
I need to know how can I create purchasing contracts on SRM system: I must do it only through web portal or can I create them through SRM Transactions? What are the transactions which allow me to do this?
Thanks in advance, best regards,
Maria

Hi Maria,
In addition to what Masa has replied, the system does not allow the transaction to be processed in GUI once it is classified as Easy web transaction.
BBP_CTR_MAIN is the transaction for Processing contracts. You can maintain the transaction using SE93 txn code.
If you click on display button you can see that the transaction is classified as Easy web transaction by activating the radio button.Once this setting is deactivated the transaction can be processed in GUI.
You can test the transaction by clicking on the Test icon on the menu bar.
Hope this makes you more clear.
Award points for helpful answers.
Rgds,
Teja

Can we send .csv file from sap srm system to sap pi?

Hi Experts,
we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
How can we send .csv file from sap srm to sap pi?
Regards,
Anjan

Anjan
As you know SAP SRM and SAP PI are different boxes.
*_Option 1:_*
we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
Option 2:
Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine. You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using sender file communication channel (FTP Mode) providing user credentials.
Hope it clears now.
Regards
Raj

Tracking Transports for confi/dev overwritings in sap srm system

Similar Messages

Maybe you are looking for