Tracking Video Clip to JPG BG Image

I am creating an animation scene with a JPG background image (replicating a website) in which the camera moves throughout the webpage (or jpeg). I also have smaller video clips over the jpg that play and stop and I would like to track these to the jpg.....somehow. In other words, one would be scrolling up/down this webpage and they would be scrolling past the video clips that are being played on the page. I don't want the video clips to move with the camera movement.
Is there any way to do this (other than keying frame by frame)?
Thank you

Thanks for the feedback, Mylenium and Vishesh.
I must have done something in my original comp to mess it up. When I moved the BG layer (rather than the camera), the child layers stayed with it. However, if I moved the camera, the child layers did not stay with it. I just started a new comp with only a few layers and was able to move the camera while keeping the child layers attached to the BG.
Can't figure out what I did wrong? Any ideas? Everything looks identical between the two comps.....but one works and the other doesn't:
Camera parented to null layer
Null and subsequent layers 3D
Layers parented to BG layer (jpeg)
Movement via null/camera layer
Just don't want to get further into this and have to start over again.
Thank you!

Similar Messages

Dreamweaver CS4 start a FLV video clip by clicking an image or text

Hi
I have 4 small FLV video clips on my page and I would like to start (and possibly stop) these clips by clicking on an embedded image or piece of text on the same page rather than by clicking the video clip itself.
Can anyone suggest a piece of JavaScript or a DW Behaviour that would do the trick.
I am using Dreamweaver CS4 for Windows 7.
Any help much much appreciated.
Regards
George

HI PZ
Thanks for getting back to me. Although I must admit this is very disappointing. Surely there must some Javascript that would launch the FLV video clips that could be copied and pasted into DW - I've seen similar features in many websites whereby clicking a thumbnail image launches a video clip.
Any one else any thoughts.
Thanks
George

How do I mute the audio of a video clip in PS 6

I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line

an interesting development as I proceed with the video. I guess I'm missing an integral concept here. It appears that some of my cideo clips import into the project and the segments have a blue color. These offer an option to fade in or out the audio, to mute the audio or adjust the volume.
Other vidoe clips import purple, like the still image files, and hence these do not offer any audio options, just motion objects.
So, what am I doing wrong? Why do some video clips import (purple) as image files?

Using Safe Margins in PE11 Video Clips

Is it possible to manually resize a video clip in Premiere Elements 11 so that it fits inside the safe margin frame? If so how do I do this?
Also, is it possible to get rid of video clips' black side bars in PE!!? If so how how do I do this?
Thank you,

andrew-dd_1937
What computer operating system is your Premiere Elements 11 running?
1. With the Safety Margins on in the Edit area monitor and the video clip selected, scale the image in the monitor to fit the area of interest.
Scaling can be done by clicking on the monitor to bring up the image's bounding box and then dragging on one of the handles of the bounding
box for the scaling.
Tip: Depending on the specification of your TV, you can alter the Safety Margins in Edit Menu/Project Settings/General targeting
Title Safe Area
Action Safe Area
Also, in Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, you can uncheck the option Constrain Proportion so that
you can scale width and height separately.
Scaling can also be done by selecting the Timeline clip and then using the Scale Slider found Applied Effects Tab/Applied Effects Palette/Motion
Panel expanded and its Scale property.
Where are you seeing these black border in Premiere Elements....?
When you first drag your import to the Expert workspace Timeline or some place else. If at export, then you (manually) or the project
(automatically) have not set the correct project preset to match the properties of the source media. So, more information on what is
happening here.
Please let me know if I have interpreted your questions correctly. If not, please more details.
Thanks.
ATR

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Can I use imovie to make a movie by first making a soundtrack and then adding video clips to illustrate the sound track?

I want to make a movie using imovie 11.
I want to import still photos taken from the inet and import video clips of myself over the stills. I also want this movei to illustrate a soundtrack of my singing with a karaoke file.
Is this possible?
How would I get my voice singing with the itune song so my singing and the itune become one track?
Then could I use that soundtrack to build the movie, rather than start with video an add soundtrack?
This is an ambitions project.
HELP!

Hi
This is a No and Yes question.
No You can not add Audio first in any iMovie from iMovie'08 (version 7.0.x) and onwards. You need to use FinalCut Pro X to do this - Where it's rather straight forward.
Yes - it is a bit tedious but can be faked in iMovie - by first creating a Black .jpg photo. Add this to TimeLine in iMovie as many times (and at max duration) to reserve the time the movie will use. Then add Your Audo track. Then add Your photo and videosequences. There are a function in iMovie that let's You replace the original video with the one You want to insert - "Cutaway" - Then continue till all Black parts are replaced. Movie done !
But really - take a look at FinalCut where this is much easier.
Yours Bengt W

Can PS CC 2014, export a video clip as image sequence?

Can PS CC 2014, export a video clip as image sequence?
I am trying to get a short video clip already in PS, into an image stack for stacking>
I dont think PS will stack a smart obj that is a video. So, can PS save out the frames as JPG etc so I can reopen and then stack?
I dont have the space on my HD for Premiere or AE.
Thanks
Maxi

Yes it can.
Mylenium

How do they do this? video or .jpg took from video clip?

http://www.shaveeverywhere.com/
Just wondering how this was done? Video looks very clean. No
back ground, no shadow....
Did they import video to flash or did they use images like
.jpg which were taken from video clip?
any idea??
I've never used video in flash so I'm not too sure how to do
this.
thanks in advance.

haha - what a great site!
Very well done - good, professional job. Looks to me as
though the video was
shot against a blue screen, then the background chroma keyed
out (in After
Effects or similar). The video is then exported to FLV with
the alpha
channel intact, so only the man shows against the background
of the Flash
site
Remove '_spamkiller_' to mail

How do I move video clips to specific points on a music track in iMovie?

I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...

Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W

Can anyone help me figure why there is a popping sound when I move from an iphoto still image to a new video clip? The sound has been removed from the video clips and there is another soundtrack underneath it all. Help?

My current project is like many I have created in the past. I have removed the sound from my video clips and laid another soundtrack under the entire project. Now, when I add an iphoto still image to the project, when it goes back into video there is a popping sound. I've never had this happen in the past and have made many projects in the past just like this one. Any way to troubleshoot this issue? Thanks so much for your help.
Ben

What audio output are you using? What mac and version iMovie

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How to extend audio from a video clip over an adjacent still image

I'm in iMovie 11. My project looks like this: video A, transition, still image B, transition, video C. I want the sound from video C to start playing while still image B is on the screen. I tried following the iMovie 11 help instructions for extending a video clip's audio. I click on video C and open the precision editor. From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle. The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening. Either the video and audio move together, or nothing moves.
When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
What am I doing wrong?

I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

Need to remove video clip and save audio track.

We are trying to remove a segment of video clip and save the audio track that goes with it. We intend to fill that open segment with transitions of still photos, all the while allowing the narrator, who has now been "clipped" to keep speaking.
We are using CS3 Premier Pro.
Any advise would be greatly appreciated! Thanks for your wisdom...
Mary M.
Yellowstone National Park.

Mary,
I find that just Alt-clicking on the Video and hitting Delete to be the quickest method. That does exactly the same as Unlinking, with two keystrokes - Atl-click Video, Del key.
Hope that helps,
Hunt

Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
Please help

Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

Aperture - when you have saved a multi-media slideshow and you export it how do you make sure the audio track retains the volume drops that you programme in? I have video clips with audio, which when they play in the slideshow, I fade the audio (music)?

Aperture - Sorry I'm new to this so this might be a bit long! I put together an aperture slideshow with a backing music track and some video interspersed with photos. When I exported it to put on you tube the audio backing track had not saved the fades that I had programmed when the video clips played. The video clips had audio on them that I set at one volume whilst fading the backing track. these fades didn't save on the exported version. Any suggestions please? Regards, Maxjackpete

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Tracking Video Clip to JPG BG Image

Similar Messages

Maybe you are looking for