Trackpad button for left-handed mouse users

Dunno if this has been documented elsewhere.
When PC style mouse is set-up for left handed use and then disconnected, the trackpad button remains useless and can only be used IF secondary button click is active.
Regards,
MS

Balthasar Schopman wrote:
Incredible. I experience the same problem as the people above.
When I change the primary button, to use the mouse with my left hand, and disconnect the mouse, the click on the trackpad changes to a secondary-button-click. That's terrible! I can't even change it back without connecting the mouse again!
This wasn't the case in Tiger, I'm sure. Please Apple, fix this problem!
This is a user to user forum.
You can contact Apple from the link bottom right or file a bug report:
https://bugreport.apple.com
I am ambidextrous and when I use the mouse with my left hand I never change the buttons.

Similar Messages

  • Expand/Collapse a tree using a Left Handed Mouse not working

    I have a couple of forms that use a tree item. If I set my mouse to be left handed I can no longer select a node on the tree or expand and collapse the nodes.
    I'm using Oracle JInitiator: Version 1.3.1.17 and Forms [32 Bit] Version 9.0.4.0.19 (Production).
    Is Oracle Forms Leftist? :)
    Richard

    Hi, stumbled on this today...not a real techie fix but may be useful in your projects...
    Left handed mouse setup as per MS Windows Mouse settings only allowed switching of primary and secondary mouse button function...(XP Pro).
    Happened upon an NT Workstation and attempted to setup mouse as above, however on this workstation there was an MS Intellimouse set of software (5.2/4.1) in the mouse setup.
    I switched the buttons to make it left handed...
    Accessed our application and set about navigating the left hand tree, it worked normally single clicking on each node...prior to this the left tree was awkard for left hand mousers.
    Installed these drivers on XP machine and same results...left hand tree works fine..
    sorry if this low tech but I am a front end user rather than a coder.
    Cheers..........Nige

  • Setting up Left Handed Mouse option

    I am only able to use the left hand and I am running both Mac OS and Vista VM Ware on my Macbook Air. I am using a wireless Kensington mouse because I needed two buttons to operate Vista.
    Being left handed I configure the Apple System Preference panel so that:-
    - the trackpad would NOT be disabled when I use the mouse
    - the main button on the mouse was the right button (since I cannot use my right hand).
    Mouse works fine but since I have selected these options the trackpad mouse is simply disabled! But if I reset the mouse option to left button as main button, then both mouse and trackpad bar work.
    THIS IS A BUG that is in the way of disabled people! Can you please provide a fix which allows me to use a mouse for left handed, WITHOUT at the same time disabling the trackpad bar/mouse?

    Hello JAF1:
    Welcome to Apple discussions.
    Please forward your excellent suggestion to Apple here:
    http://www.apple.com/feedback/macosx.html
    Although Apple employees monitor these forums, the best way of making sure input is received is by using the feedback facility.
    Barry

  • Apple watch for left handed?

    Do you know if Apple will propose the Apple Watch with the buttons on the other side for left handed who wear their watches on the right wrist?

    For those who say go to an Apple store and ask them, the people there are uninformed. I have been to 2 different stores in 2 different states and was told you wear it like any other watch. That would make controlling the digital crown awkward. I have since found online that you do indeed establish a hand at set up as stated by stevejobsfan0123. When on the right wrist the digital crown faces the hand and is at the bottom instead of top as it is when on left wrist. I guess I'll know for sure when mine arrives - not till middle of May.

  • Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?

    It's either hand right or left.
    I have the same issue myself.  Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard.

  • What accommodation on new apple watch will be made for left handed people who wear watch on right hand?

    controls on apple watch will be a problem for left handed people who wear watch on right wrist

    http://www.cultofmac.com/295208/dont-worry-lefties-apple-watch-left-handed-mode/

  • Can the "ADD-A-NEW-TAB" button be reconfigured to be adjacent to existing tabs (like it used to be)? I am a left-handed tablet user who finds it's position on the far right side of screen very inconvenient.

    In previous version of Firefox, the "add-a-new-tab" button has been located to the right of any existing tabs. In the latest version it's been moved to the far right of the screen. In tablet mode, this is too far to reach conveniently for a left-hander. I cannot find any controls to re-configure it to the way it used to be and I can't "drag" it to where I want it. Is there a way to relocate it?

    Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

  • Left-handed mouse pointer in OS 9?

    My Dad recently lost use of his right arm (he is right-handed) and so he now has to mouse left-handed. He is using OS 9 and wants to know if there is a way to change the mouse arrow (pointer) so that it is angled to the right (for a left handed person) instead of to the left (as most right-handed people like)?
    Does anyone know of a way to do this in OS 9 and/or in OS X? He actually has two computers one running each OS.
    Thanks!

    Great going Niel... been searching for hours!
    For OSX this plus Application Enhancer +may work+...
    http://unsanity.com/haxies/mightymouse

  • Z8000 Left Handed Mouse problem

    I recently bought an HP Bluetooth Mouse Z8000, the pairing went smooth but when configure as a left handed device found that sometimes switches right/left mouse buttons at random. Actually I´m thinking the mouse is defective. Any other person having the same problem with left/right buttons??

    yes I am also having this problem, the left click button becomes right click after few clicks, then it resets back to left button and so on.
    Thanks HP, that product is awsome is it designed to work that way?? EXCELLENT WORK!!
    I hope someone buys HP to straighten their product support and product quality a little bit.

  • Where do you switch phone for left handed users

    Want to set up phone for a lefty so items are listed on the right side of the screen not the left.

    I don't think you can. I've read a lot of reports from upset lefties in relation to the way they use their iPhone. I think it's an oversight in design... a big one really.
    I would love to be wrong though! Maybe someone else knows?

  • Thinkpad L440 - Left-Handed Bluetooth Mouse but Right-Handed Touchpad

    I have my bluetooth mouse connected but I want to use it as a left-handed mouse.  I can't seem to figure out how to do this without changing the configuration of the touchpad.  I want to keep the touchpad right-handed.  Is there any way to do this?  Thanks!

    Hi Brittneym,
    Welcome to Lenovo Community!
    As per the query we understood that you are looking for Touchpad setting on your ThinkPad L440.
    Please go to Control panel – Mouse setting and in Buttons menu tick the check box “Switch primary and secondary buttons” this will change the complete setting for left hander users, and after applying those setting go to UltraNav menu and click on “Touch Pad Setting” you will new window touchpad properties in that expand Buttons option on “Left Button Action” set it to Primary Click and on “Right Button Action” set it to Secondary Click apply the settings and click on OK.
    You can give a try on the above setting; it worked with USB external mouse but I am not sure with Bluetooth mouse. Check the screen shot from the below link
    Dual Touchpad setting
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Left hand user

    Hi
    I'm using a T410 and I'm using left handed mouse configuration. I've installed MS wireless laser  mouse 5000: it's working fine, touch pad buttons works fine too, that is - the buttons are configured   for   a left hand use. The problem is with the buttons of the track point: they are configured  for a  right   hand you only, and i don't know how the fx it.
    Please advice
    thanks

    Restart of the eMac cleared it up. Was having problems with the two Airport Extremes working correctly. That was an amperage problem with my circuit protector - a whole nother story!

  • Mighty mouse: left-handed

    hi,
    i want to use my mouse as a left handed mouse.
    i configured the secondary button to ben on the left, just worked.
    but i notice when i move the mouse up, down, left or right it moves diagonally.
    i understand this is because right handed people hold the mouse like this: \ but i hold the mouse like this /, so it moves diagonally.
    is there any way to change this?
    i could not find anything in preferences, do i need to search better or maybe i can change it by setting one of those defaults write com.apple.whatever by terminal?

    pepsel wrote:
    hi,
    i want to use my mouse as a left handed mouse.
    i configured the secondary button to ben on the left, just worked.
    but i notice when i move the mouse up, down, left or right it moves diagonally.
    i understand this is because right handed people hold the mouse like this: \ but i hold the mouse like this /, so it moves diagonally.
    is there any way to change this?
    i could not find anything in preferences, do i need to search better or maybe i can change it by setting one of those defaults write com.apple.whatever by terminal?
    I am ambidextrous but I hold the mouse "vertically, like this | " not on a slant, whichever hand I use.
    If I do tilt it slightly, I do not see any angle movement - perhaps I automatically compensate for it??
    You are asking for some kind of anti-skew option. You might search for some 3rd party software to do it. AFAIK, there is no standard built-in setting for what you are looking for.

  • Apple Watch does it make provisions for left-handers? either a mirror image version, or the ability to rotate the display 180º allowing it to be worn on the right wrist and controlled with the left hand?

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    Thanks,
    Rick
    PS: none of the "communities " accessible to me seemed appropriate for this question, so I am posting here, hoping someone will forward it on to the proper place in Apple.

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    There's a option when setting up the watch to set it up for left handed users. That and the easily user revisable straps will accommodate lefties.

  • Getting the mouse left-handed

    Hello Folks!
    Beccouse I am lefthanded I would like to "mirror" my mousecursor. I'm using GNOME 2.24 and gdm as login manager.
    I have downloaded once a left-handed mouse-theme from Gnomelook. But this proved to be very inconsistend. Also I could not find a way to get another mouse-theme working on gdm.
    Any ideas or howtos???
    G.

    I used a little program called xcur2png to convert a xcursor theme to pngs and a conf file.. then flip horizontally each png with imagemagick, mirror the focus coordinate in the conf file, and pack everything with xcursorgen...
    I didn't find xcur2png in aur though, so here's the PKGBUILD if you need it ...
    pkgname=xcur2png
    pkgver=0.7.1
    basever=0.7.1
    pkgrel=1
    pkgdesc="A program that takes PNG images from X cursor, and generates config-file which is reusable by xcursorgen"
    arch=("i686" "x86_64")
    url="http://d.hatena.ne.jp/tksmashiw/"
    depends=('libxcursor' 'libpng')
    source=("http://www.sutv.zaq.ne.jp/linuz/tks/item/xcur2png-0.7.1.tar.gz")
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=/usr || return 1
    make || return 1
    make DESTDIR=$startdir/pkg/ install || return 1
    md5sums=('42a425b2572f7a22d58de4c03cc3b288')

Maybe you are looking for

  • The kind of help you get with HP Chat...it's a real good way to spend an hour on your weekend

    I copied my recent session with HP Chat so people may see how inadequate out-sourcing to other countries is.  After nearly an hour, this professional tech agent thought it would be helpful to have me create a file in my C: drive to see if it got ther

  • Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

    Hi, I'm new to this forum and I hope you guys can help me with this: I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't

  • Using DISQUS in iWeb

    Hello, *I want to add the Disqus system to my iWeb website in time for the 2nd season of my webradio show called Gatinorama.* *I opened my account at Disqus and tried a test page (see link at http://www.gatinorama.com/GATINORAMA/%C3%A9pisodes/Entr%C3

  • MonitorFor Processed XML Messages

    Hi Eveybody, I have a little problem with my message. I uploaded my xml with Transaction CG3Z from my directory to SAP system. I saw the xml in AL1. After a few minute it disappears and when I go to SXMB_MONI and I execute for check the process. The

  • Compiler configure problems (cross compiling?)

    When attempting to compile packages, I am receiving these errors: checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we