Trackpad click not working half of the time

Is there a solution to that problem? Just start acting like that couple days ago. thanks in advance for the help

Settings > General > Accessibility > Home-Click Speed - Change from Default to Slow

Similar Messages

  • Spotlight search (search iphone) does note work half of the time.

    When searching my iphone4s nothing show up half the time. (spotlight search)  Sometimes it works fine and other times I type and it does not search or show anything. Powering down the phone did not fix.  Just odd it works for a minute then seems to stop completly.  No other problems besides this one.

    OK, well at least it works 50% of the time.

  • IOS 7.1 Upgrade - home button double click not working most of the time

    Hi,
    Not sure, if anyone else had encountered this issue after upgrading to iOS7.1.
    I am using iPhone5S 32 GB and it was working fine with home button (double click, mostly used to see & close other applications running in background) till I upgraded to iOS7.1. After iOS7.1 upgrade, most of the time, I am unable to see running applications. After trying for 4-5 times, I managed to see running application
    Is there any fix or workaround for this issue?

    Settings > General > Accessibility > Home-Click Speed - Change from Default to Slow

  • I go to open the internet but it does not work half of the time and when my restart my computer it works just fine... Does anybody else have this problem??? I have to restart my computer every hour or so!?!?!?

    Please help!!!

    Wireless or ethernet?
    Which os?
    Solution may be found if you search in the "More Like This" section over in the right column.

  • Downloaded ios7 to my iphone4s and now my volume control does not work 99 % of the time. what can i do to solve the problem

    I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?

    Adjust the Volume Control in Control Center, or try a RESET.............

  • My iPod touch 4 home key not responding half of the time

    My iPod touch 4 home key is not responding half of the time when closeing apps and when iPod is asleep

    You can try the standard fixes:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -  Restoring from backup
    - Restoring to factory defaults/new iPod.
    - If under waranty, try to get it fixed/replace under the warranty.
    - FIX for iPod Touch Home Button: Apple Support Communities

  • Microfone and speaker is not working most of the times

    Microfone and speaker is not working most of the times. But after restarting it sometimes it works and again everything gets mute

    Hello there, Paras1111.
    The following Knowledge Base article offers up some great information for troubleshooting issues with microphone and speaker. Feel free to review the links under "Acoustic-speaker/microphone/receiver:"
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My trackpad is not working it moves the arrow but I cannot click on anything or drag anything

    My trackpad is not working on my MacBook pro. I can get the arrow to move but I cannot open files or drag files when I click.

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the Lion recovery partition, if present.

  • 13in. 2008 trackpad click not working

    The physical click on my trackpad is not working. Cleaned it thoroughly, tried removing the battery (bloating) and that did not work. Any thoughts? Things I shoud try? Thank you.

    With the glass buttonless trackpad that the model 6,1 Late 2009 has you need to have the Tap To Click box checked in System Preferences>Trackpad http://support.apple.com/kb/HT3211

  • HT201401 My iphone 5 volumn down button does not work most of the time. it feels fine.  in an otterbox defender. this is my second iphone that it is doing the same thing.

    i have a iphone 5. the volume button going down only does not work.  this is my second phone with the same problem.  i have had otterboxes for both phones.

    Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.

  • Trackpad click not working properly

    Hey, I've had my Macbook 1.83ghz for like 6 or 7 months now and I haven't had any major problems up until now.
    The Trackpad clicker has recently began to 'stick', it's hard to explain but it doesn't respond as it used to and it takes quite a heavy push now for it to respond, so it's pretty much impossible for me to drag files and work in Photoshop.
    I did quite a bit of Googling to try and find similar problems but I only found this solution of using paper to fix it, which didn't work for me.
    I noticed a recent post here concerning the recent Battery Update, I thought that might have been the problem I had but it seems it's not as I've just taken on the battery whilst running through the cable. Still getting the problem.
    Thanks

    Hi,
    The best way is to phone AppleCare and ask (UK tel. 0870-876-0753), but otherwise, take it in to any authorised Apple repair centre.
    Here's the UK retail store details. Try a search for Apple authorised re-sellers throughout the UK too, assuming that's where you are. All the official Apple retail stores, and all the officially authorised re-sellers (I think) can do the repair for you under warranty.
    If you're outside the UK, search the Apple site for info for your area.
    Cheers,
    Rhys

  • Ethernet Port not working 50% of the time?

    On my new GD55 P67 50% of the time I start my computer the Ethernet port does not work. I know the cable is good because I have tried several cables. It seems to have problems right after I installed SP1 for windows 7. Is their a known problem with the Ethernet port on this motherboard?

    By "start my computer" do you mean start from a complete shutdown, start from S1/S3 sleep or start from hibernation?
    The next time you start the computer and your Ethernet port doesn't work, open up a Command Prompt window and type "ipconfig /all" (without the quotes).  Copy and paste the results displayed for the Ethernet port you are having a problem with (or just copy it all if you are not sure which section belongs to the port in question).
    - D

  • My trackpad is not working what is the possible cause

    please help me find solution on how to operate again my trackpad because it is not working..

    Is your MacBook one with an easily removeable battery? If it is, shut down the MacBook and take the battery out. Connect the MacBook to a power source with its power adapter. Restart the MacBook. Test without the battery installed.
    Inspect the battery for any signs of expansion. If any are found, or if the MacBook trackpad works normally without the battery, replace the battery.
    Best of luck.

  • Search feature not working most of the time

    My  search feature on my iPhone 4 rarely works anymore. After swiping screen from left to right or pressing HOME button nothing happens when I start typing. If I press the search button it will take a long time before responding.

    Sharing between Leopard and Snowleopard does not work reliably. For this reason, we do not recommend mixing Operating Systems.
    Hope this helps,
    Syd

  • Shared printer not working (most of the time)

    I have a Mac Pro running Snow Leopard using a shared Epson R380 printer connected to a G5 (running Leopard) . Most of the time it doesn't work, but occasionally it will. On the Mac Pro, the Epson monitor says "print job accepted" but doesn't change. On the G5, the Epson monitor shows the print job, but says "job stopped". When trying to resume the job, a warning box pops up on the G5 saying "Operation C0uld Not Be Completed - client-error-not-possible".
    The shared printer works fine (most of the time, too) with another networked Mac, a Mac mini G4 running Leopard.
    All OS's are the latest possible.

    Sharing between Leopard and Snowleopard does not work reliably. For this reason, we do not recommend mixing Operating Systems.
    Hope this helps,
    Syd

Maybe you are looking for

  • Map a custom SRM field to a standard field in R/3

    Hello All, We have created a custom field in SRM and it needs to be transferred to one of R/3's standard field. it has to be done in both the classic and extended classic scenario. For the extended classic scenario I tried using the BADI BBP_ECS_PO_O

  • Purchase Order line items deleted after coying from PO in GRPO

    Hi All, Does anyone here experienced this problem? The user reported that after adding the GRPO that generated by copying from PO, they found out that the line items in PO has been deleted? We're trying to reproduce this problem but we're unable to r

  • No video and music synch

    I have a 30GB video. i am not able to copy any videos to my ipod. The video is the right format which can be played on other pods. Also i am not able to play songs from my ipod from itunes. its only when i disconnect the ipod, i can listen to the son

  • Creating a data model in BW by importing an .ER1 file

    Hi, We have a Data Model from an Oracle 9 data warehouse in the form of an Erwin File ( .ER1) . We would like to replicate this data model in SAP BW 7.0. Is it possible to create the same data model in SAP BW by importing this file and automatically

  • Help i need my curve working

    ok here is my problem,  my batt kept going low kinda quick, so a few nights ago it went dead so i plugged it in to charge after a few min charging it came up with a pic of a battery with a slash thru it so i let it charge all night   come the morning