Trackpad doesn't work for 5 seconds after any USB device is connected

This is really irritating. I could plug in any USB device - a hard drive or iPhone, and the trackpad will not work for about seconds of trying to get the pointer to move around the screen. Normally there's nothing connected to the Mac, so when something is plugged in, even if I just plug something in and walk away from it and come back some time later, if I try to move the trackpad, nothing will happen for about 5 seconds after trying to move the mouse pointer. Very strange.
Any idea what's going on?

Seems like a strange problem. You could try putting dbus earlier in the list, second after syslog-ng is where I used to have it. Moving to systemd might fix it too.

Similar Messages

SPRunConversionVersion7.0.119:Doesn't Work for Account without any ratetype

Hi Experts,
I work with SAP BPC MS7.0
And the SPRUNCONVERSION doesn't work for accounts without any ratetype : value in the dimension is in blanck.
I though that it was supposed to work like this :
"The stored procedure SPRUNCONVERSION scans all records found in the selected region of data and translates them according to the RATETYPE property assigned to the ACCOUNT specified in each record, based on the following mechanism:
All ACCOUNTS with no RATETYPE (ratetype = blank) will be translated with a factor of 1
All ACCOUNTS with the reserved RATETYPE = NOTRANS will not be translated
All other ACCOUNTS will be translated according to the definitions contained in the table of parameters called clcFXTRANS."
Doesn someone has faced this problem already ? how can I solve it ?
Thanks for your help,
Olivia

Hi Olivia,
This was seen as inconsistent behavior and was corrected in SP10.
See the following note [1569127|https://service.sap.com/sap/support/notes/1569127] for further information.
Thanks,
John

Pickup Clock doesn't work for markers. Any alternatives?

Hello everyone,
It seems that Pickup clock doesn't work for markers (I guess markers are not considered an "event.") Is there a way to move markers as quickly as I do "event" data with pickup clock; e.g. a key command that allows you to write the location start time of your markers? Or even better, a way to move all data within locators to different song positions quickly?
I'm scoring a film and trying to break down my master "spotting" session (in which I placed markers at the beginning of each cue) into separate files. Moving "events" is easy, as I just separate at the marker using "cut at spl" select all following, move SPL to bar 1, and use pickup clock. However, no "global track" data seems to move via pickup clock. Is there an easier way to achieve my goal?
Thanks in advance for your help!

musicspirit wrote:
Is it that you want to move Global components that fit with a particular cue ( such as Volume Automation etc) around in the same Song? ie try one piece of music over two different scenes in the film? Or shift an entire cue slightly sooner or later against the picture?
YES!! This would be AMAZING if I could do this easily. As a work around I change the actual movie and of the dialog / sound FX tracks, which can take some time to get them correct and leaves you with multiple song files. It would be much easier if there was a way to grab everything within your Left and Right Locators, and be able to move it around, copy and paste, etc.
I tried experimenting with Split/Cut/Insert Time and a segment of regions which included some volume/fader changes - no dice. Logic can copy automation vertically track to track but not in a Linear way.. though I may be speaking in complete ignorance.
I'm going to read up on Split/Cut Time as well, as this maybe the key. As for your automation issues, I know logic will not copy / paste automation when there is no "node," (i.e. if you are cutting on bar 5, but the last node was on bar 3 and the next on bar 7, it will not "go back to 3" to get the proper levels) so in the past I have placed nodes on the beginning and end of the section I want to copy, and the automation then copied fine. Of course if you have a lot of automation, it can be a PITA to place nodes in each track, but it does seem to work. Hope that helps!

Get_selected_rows doesn't work for second time

I have a custom screen with an ALV output and some push buttons. When I select one of the rows in ALV and click on a pushbutton, it does go the next screen. But, if I come back and select another row in ALV, the table parameter <b>ET_ROW_NO</b> returns with no entries. Couldn't figure out myself. Can anybody please help me?
Thanks,
Chandu

Hi,
In your PBO during creation of your object, maintain a flag. Consider the following :
IF FLAG = 'X'.
CREATE OBJECT DUMMY....
CALL METHOD DUMMY->SET_TABLE_FOR_FIRST_DISPLAY....
ENDIF.
If you maintain this, the object will not be initialised every time.
Try this and if helpful reward points.
Courtesy : Sakthi Seithur
Regards

Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

Zoom in-out and rotation in trackpad doesn't work in iPhoto and Aperture. Any solution?

Sound like a trackpad problem and not an iPhoto one. Have you asked in the forum dedicated to the Mac model you're using or is this an add on trackpad?
OT

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

So, you're totally new to computers?
Go to the Help menu in Photoshop and select the System Info menu item. Copy all that information and paste all of it here MINUS your serial number.
Yes, Photoshop can delegate a lot of the computing tasks to the GPU on your graphics card. You may have to disable that feature in Photoshop Preferences > Performance.

My mic for my iPhone 4S only works on speaker phone and doesn't work for Siri. What can I do?

My mic on my 4s only works on speaker phone in calls. It also doesn't work for Siri or voice memos. Is there any way to fix this without having to buy new parts or exchange it?

Hello there, mbrda92.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly of note:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

Hello!
The central autoreaction method doesn't work for the satellite system
NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
works fine and e-mail alerts are coming.
The configuration steps I've checked:
1. Configured SCOT. The mail_send job executes every 5 minutes.
2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
central CEN/000/DDIC and satellite system SAT/000/DDIC)
3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
(Only in central system CEN/000/DDIC)
4. The sapccm4x-agent registered as web service within CEN using
Create Remote Monitoring for NW 7.10:
Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
5. Created a new autoreaction method by copying method
CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
Execute Method on Any Server and Only in Central System, triggered by
CCMS agents
SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
6. Got MTE Classes from NW 7.10 satellite system and assigned this method
Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
satellite system. The alert is red right now.
7. The mail_send job doesn't send anything, in SCOT there are no
sending orders.
8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
CEN_CHECKED.
9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
in manual the alert status changes to ACTIVE, but no email and no
messages in sending orders in SCOT.
Please help me to solve this issue.
Thank you!

Hi,
Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
if yes , that means there is problem in either SCOT configuration or distribution list.
If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
Regards,
Rupali

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

PSPaletteMenu category doesn't work for automation plugins

Hello,
I would like to have a menu item under Photoshop "Window" menu for my automation plugin.
There is a notice in the PIPL.r file that goes with SDK:
// Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
// This is currently only enabled for automation plugins.
PSPaletteMenu ="**Palette**";
However when write my PiPL res like in example below
resource 'PiPL' (ListenerResourceID, plugInName " PiPL", purgeable)
Kind { Actions },
Name { plugInName "..." },
Category { "**Palette**" }, // or Category { PSPaletteMenu }
Version { (latestActionsPlugInVersion << 16) | latestActionsPlugInSubVersion },
menu is not shown under Window menu :(
Want to note that if I specify Category { PSHelpMenu } it works correctly and menu item is shown under Help menu. PSPaletteMenu also doesn't work for Listener plugin that ships with PS SDK.
Looks like plugin is not recognized as automation plugin, but I have correct info.plist props (on MacOS X version)
What should be done to have my plugin menu item under "Window" menu?
Regards,
Mac Developer

Hi Tom, thanks for your reply. Actually I'm not asking about floating palette (which I actually created and there is no issues observed). I just need my automation (!) plugin entry point to be called with kPSDoIt ("Do It") selector action after menu item is chosen under Window menu. (like it works in case PSHelpMenu)
In the PIPL.r file that goes with SDK it states that
// Use PSPaletteMenu category to add a menu item on the Window (i.e., palette) menu.
// This is currently only enabled for automation plugins.
PSPaletteMenu ="**Palette**";
Is it documentation issue?
Regards,
Mac Developer

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

T.code S_ALR_87012177. It doesn't work for histories: is there a solution?

Hi All
Rif t.code S_ALR_87012177. This report requires, for working, the flag in th filed "Payment history record" in the tab "payment transactions" of customers master data.
I've adjourned the master data of the customers putting in the field "Payment history record". But the report doesn't work for histories. Is there a program which make the report working for histories too?
Thanks
Gandalf
Edited by: Umberto Gandalf on Mar 23, 2009 12:02 PM

Hi Suresh,
I have one issue with same report
when i seen the report there are two arrears days are showing to corresponding to the months Feb
as per the Report S_ALR_87012177 help following below
Arrears in days
The average days in arrears are determined as follows: Every
incoming payment in the periods concerned is multiplied by its days
in arrears. These amounts are added together and then divided by the
total amount from all the incoming payments. This process ensures
that the days in arrears are weighted by the payment amount
but for February month there are 9 payments on one customer and when checked in FBL5N report
there are no Arrears days on each payment document but in the report "customer history ' there showing 2 days as arrears under " payments with Cash discount .Arrears"
User has doubt how this report is working to show the Arrears days
Are there any Formula , can you please advise me
if you knows well about this
Regards
Ranamka

Find function cntrl-f doesn't work for long pages. frustrating

find function cntrl-f doesn't work for long pages. Works find on your competitions IE, though I strongly prefer FF.
== This happened ==
Every time Firefox opened
== Several versions of FF

Hi Cb,
I did try that and it didn't work. the site in question (though I could pick any) is midwestmafia.com and I typed in capone (which is near the end of the page)
Works well on IE, though I'd like to stick with FF.

Trackpad doesn't work for 5 seconds after any USB device is connected

Similar Messages

Maybe you are looking for