Trackpad gesture 3 and 4 fingers not working after upgrate to Yosemite

Hi, Pls help
Today I have install Yosemite on my macbook pro 2011 late, First time macbook on, everything is OK. but after install some application and then restart, suddenly trackpad gesture is not working.
I have try the following to fix this problem but still no solution..
1. Restart macbook
2. Unable and reenable the Gesture
3. Killall dock
I think this is bug of Yosemite.. any other solution please?

Mine does the same, and when I use the keyboard shortcut (control + arrow key) it will shift but once the other screen has appeared, the preview app is activated, almost like it's stuck on. Sometimes I've been able to get it working again by relaunching Finder, but I mostly have to restart the machine. Very frustrating.

Similar Messages

  • Brightness and volume keys not working after switch to Yosemite

    Once Yosemite was installed, the brightness (F1, F2) and volume (F10, F11, F12) keys on my macbook pro stopped working. I have already checked the System Pref>Keyboard and unchecked the "standard function" box, done an SMC and PRAM reset, to no avail. My sound in and out are both set to built-in. Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • The date and time is not working after setting it to current date and goes back to may,26 2011

    the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

    On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar).  Also make sure your date and time on your computer is correct as well as the Time Zones on both.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

    Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
    After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
    hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
    Any ideas? 

    The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
    And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

  • Illustrator CC 2014 open and place commands not working after installing Yosemite

    How can I get Illustrator Open and Place commands to work after installing Yosemite?

    Hello,
    I also have the same problem, after 5 minutes I can't open or place anything in illustrator. I have this problem also in photoshop cc 2014. This started after installing Yosemite.
    Tried to reinstall but nothing helps.
    Today after updating creative cloud application it is even worse: illustrator is not opening anything: not even a new file. So I reinstalled... and I can open again for 5 minutes. But then it crashed while saving. Now I can't open illustrator at all...so nothing left to do then reinstalling again I suppose?

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • System sleep and shut down not working after upgrade to windows 10

    HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone  suggest, what to do ?

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature.  Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them.   1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try.  1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook.  Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter.   I hope this helps!  Have a great day!

  • CFHTTP and Scheduled Tasks not working after CF8 Upgrade

    I have recently upgraded to ColdFusion 8. My scheduled tasks
    in the ColdFusion Administrator do not work anymore. I ran them
    manually without the ColdFusion Administrator from the server and a
    local machine via Internet Explorer 7 and they work. I tried to run
    the same scheduled task with the same URL via CFHTTP in a CFM page
    and this does not work. The logs are not giving me any error
    messages. Has anyone run into this? Is this a bug with CF8 or even
    an IIS issue? ColdFusion is on a Windows 2003 SP2 server.
    Thanks,
    Mike

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML dir=ltr><HEAD><TITLE>The page cannot be displayed</TITLE>
    <STYLE id=L_defaultr_1>A:link {
    FONT: 8pt/11pt verdana; COLOR: #ff0000
    A:visited {
    FONT: 8pt/11pt verdana; COLOR: #4e4e4e
    </STYLE>
    <META content=NOINDEX name=ROBOTS>
    <META http-equiv=Content-Type content="text-html; charset=UTF-8">
    <META content="MSHTML 5.50.4522.1800" name=GENERATOR></HEAD>
    <BODY bgColor=#ffffff>
    <TABLE cellSpacing=5 cellPadding=3 width=410>
      <TBODY>
      <TR>
        <TD vAlign=center align=left width=360>
          <H1 id=L_defaultr_2 style="FONT: 13pt/15pt verdana; COLOR: #000000"><ID id=L_defaultr_3><!--Problem-->The page cannot be displayed
    </ID></H1></TD></TR>
      <TR>
        <TD width=400 colSpan=2><FONT id=L_defaultr_4
          style="FONT: 8pt/11pt verdana; COLOR: #000000"><ID id=L_defaultr_5><B>Explanation: </B>There is a problem with the page you are trying to reach and it cannot be displayed.</ID></FONT></TD></TR>
      <TR>
        <TD width=400 colSpan=2><FONT id=L_defaultr_6
          style="FONT: 8pt/11pt verdana; COLOR: #000000">
          <HR color=#c0c0c0 noShade>
          <P id=L_defaultr_7><B>Try the following:</B></P>
          <UL>
            <LI id=L_defaultr_8><B>Refresh page:</B> Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
    <LI id=L_defaultr_9><B>Check spelling:</B> Check that you typed the Web page address correctly. The address may have been mistyped.
    <LI id=L_defaultr_10><B>Access from a link:</B> If there is a link to the page you are looking for, try accessing the page from that link.
          </UL>
          <HR color=#c0c0c0 noShade>
          <P id=L_defaultr_11>Technical Information (for support personnel)</P>
          <UL>
            <LI id=L_defaultr_12>Error Code: 400 Bad Request. The data is invalid. (13)
            </UL></FONT></TD></TR></TBODY></TABLE></BODY></HTML>

  • 11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

    Hi,
    The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
    I have tried the following resolution:
    - From command line execute commands to set variable properties via admintool.exe /command vartext.txt
    Open rpdname user password
    SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
    Save
    Close
    Exit
    This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
    The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
    Is this a bug?
    Thanks in advance
    Edited by: 983325 on 26-Feb-2013 02:35

    There is a 3.1.0.5 client. First thing I would try is the newest client.
    Sent from Cisco Technical Support iPad App

  • Drag and drop doesn't work after upgrading to Yosemite

    It is strange.  Since upgrading yesterday to Yosemite, my drag and drop does not working consistently.  I use drag and drop all of the time, into emails, moving files from one folder to another, moving music from finder to itunes, etc.  It seems each time I try to drag a file, initially the Finder window I am dragging from crashes and re-starts.  Once it re-starts, I actually am able to move a file as normal for about a minute or two.  After a minute or two, if I try to drag and drop a file, again it crashes and re-opens.
    Does anyone have any ideas?  I did submit a bug notice to Apple, but thought maybe someone would have a fix.

    I'm not sure if this experience relates to your issue but maybe..
    After upgrading my iMac to Yos, I could only select and copy files to relocate them. Frustrating for a couple of days. I eventually found that the setting on my trackpad was for three fingers over a selected file/folder window/etc moved the item to where I wanted. It had automatically changed to this preference. Its called a 'three finger drag'. The video shows a pane being moved but it also applies to all files etc. It can found in preferences/trackpad/point & click. Here you can turn it off if that is hat is causing the issue. Otherwise no software solutions I'm aware of. Good luck.

  • Email account and Internet service not working after migration onto a new (upgraded 3rd party) 2012 MBP. Hardware or software issue.

    I just purchased a refurb Mac Book Pro from the Apple on-line store. When I received the machine (serial number)  I purchased 3rd party (OWC) parts. All of these were installed by the authorized, local Apple repair store I have had excellant results with past issues with my 2006 MBP. The parts installed are: 16 meg ram, 240 SSD and a 1 T installed replacing the optical drive.
    Feeling ready now, I had the Apple store do the migration from my 2006 MacBook Pro (OS 10.6.8) over to the 2012.
    When trying to get the new machine into the production flow, I cannot get email to work. It will launch but I cannot access accounts.
    During the One to One, then moved over to the Genius Bar appointment, they reentered the account(s) data. Nothing.
    Also at this time they noticed that the Internet connection was not working.
    A new internet account was set up and it worked. They (Genius) launched email and the Internet connection crashed. This was repeated about 5 times.
    The computer was left with Apple to reinstall the OS (10.8) - their best suggestion as a fix and I have now had a call to say that the install did not correct the problem. Now they are questioning the install of the 3rd party parts as the possible problem.
    I'm to go back into the Apple store to discuss the next steps.
    I would really, really appreciate anyones thoughts / suggestions on this problem. Is it software or hardware? Should I re-install the original ram and 500 m hard drive to start over with the migration? I'll be honest here and state - I'm not a technician in computers or this side of technology. That is why I have reliable parties do the install and trouble shoot. Not a comfortable feeling being at their mercy.
    Advanced thanks to all who believe they have answers.

    Back from the Apple store with my 2012 MacBook Pro.
    After one re-install of the OS - no better - a clean install was performed - purging all of the data that they had migrated over from my 2006 MBP last week.
    The belief is, that the migrated data from my 2006 MBP was too great of a leap for the new 10.8. My (a lot) software was too dated and there in was a "blip" of some sort in some / one of the programs.
    So - all of the OWC parts and pieces that I had installed are not the issue - as they all show up on the About this Mac - and other things are functional. Yeah.
    I now have my 2012 back (with upgrades) in the original form (OS and programs) and I will start a one by one migration of programs that I do need and use. Being cautious not to make one large transfer.... weeding out programs that will no longer be needed or will work on the OS 10.8. I will manually set up the email accounts one by one.
    Fingers crossed.

  • Silverlight and google chrome not working after system update

    I just did a system update and now google chrome and the silverlight plugin do not work. I've tried uninstalling and reinstalling both numerous times, restarted, and checked for updates again but nothing works. What's going on? 

    Check compatibility with their respective vendors.

Maybe you are looking for