Trackpad keeps disconnecting and wont work unless I restart

I tried searching around for a resolution to this issue but haven't had any luck so turning here for support.  I recently updated my late 2012 retina MBP 13-inch to Mavericks.  Prior to the update my magic trackpad mouse was working without issue.  Now, I am experiencing frequent bluetooth disconnections with the trackpad.  The only way to re-connect is by resarting my computer (reconnection happens automatically at this point).  Any suggestion for fixes? 
Batteries were recently replaced and I have 97% battery life.

The issue is actually with the battery terminals. Chances are the spring has lost some bounce, so when you tap the pad too hard, the batteries jump, power is temporarily lost for a split second, and the bluetooth disconnects until the handshake sequence is done again with the Mac.
The solution is to put a folded up piece of tin foil in the battery comparment, between the batteries and one of the terminals (negative or positive, doesn't really matter). This will make sure the power connection is snug. After I did this, my problem was solved.

Similar Messages

  • My wifi keeps disconnecting and wont recconect

    hi, so my wifi keeps turning off a certain time in the evening and wont recconect until a certain time in the morning. I've tried everything the apple trouble shooting suggests but nothing is working. In the diagnostics it keeps saying:
    metriclogs {
      triggerTime: 1387203986381
      triggerId: 589827
      profileId: 292002
      wifiAssociation {
        timestamp: 1387203986379
        error: 4294963390
        channel: 6
        signal: -61
        bssid_oui: "\210\037\241"
        security: "WPA "
        deauth_reason: 0
        deauth_source_oui: "\000\000\000
    please, please, please help me.

    As Kneil31, said,it appears that your router is setup to prohibit connecting to the internt at times specified in the router setup.

  • I have a dilema i use a programme called Mackeeper i accidentally moved several files to my trash,i would like to put the files back where they belong but put back option is in grey and wont work??

    I have a dilema i use a programme called Mackeeper i accidentally moved several checked files to my trash BUT i didnt delete them,i would like to put the files back where they belong but the put back option is in grey and wont work?? i have spoken to Apple and to no avail !!!
    Mackeeper moved my files to my trash so i pulled them out of my trash to my desktop it has copied them to my desktop as well as kept them in my trash!!
    im so confused and things are not working properly anymore such as my google chrome for example...all my book marks are gone BUT i can go to the google file which is out of place on my desktop and view all my bookmarks data...ALL of my files still exist but they are just out of place now which is making it hard for certain options on my computer to work...
    the files includeAccounts,address book plug-ins,addressbook,Adobe,AIM,Alfred,Anquet Maps,Apple,Asramsoftware,Audio,Automatically add to itunes,facebook,facebook 15-53-13-329,faxfresh,five details,flipping book photo album, font collections, fonts, forismatic,Garageband,Gimp,Google,Google 15-53-13-344,icloud,icons,idocument lite,ilife media browser,ilifepage layout,internet plug-ins,ip scanner,itext express,itunes,iweb,Keyboard layouts,Keychains,launch agents,Librarian,limit point software,logs,mail,mail 15-53-13-895,messages,metadata,mobile documents,mobiscope,moso,movie effects,mozilla,MPlayerx,mywebcamBroadcaster,Native instruments,Skype and LOADS more......
    HOW do i get this stuff back to where it is supposed to go so that these programmes work properly again???? i also used delete and command but that did not work either,like i said i have not emptied my trash and ALL the info is there its just totally out of place and the put back option will not work sor some reason!!??? im running 10.8.5 imac someone PLEASE help me!!
    i have not set up time machine either but i do back up to a site called backupblaze...

    Step 1
    Remove "MacKeeper" as follows.
    "MacKeeper" has only one useful feature: it deletes itself.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
    Failure to remove MacKeeper will result from neglecting any one of these points:
    Quit MacKeeper before dragging it to the Trash.
    Don't empty the Trash after dragging the application to it. Let MacKeeper delete itself.
    Don't try to drag the MacKeeper icon in the Dock to the Trash.
    Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
    Step 2
    Restore from the last backup that predates the unwanted changes.

  • Controller keeps disconnecting and reconnecting

    Hi thereI have recently had a problem with my Dualshock 4 controller connecting to my PS4. I took ps4 to my dads while i was staying there and everything was fine. Since i returned home i set up ps4 as normal but my controller keeps disconnecting and reconnecting itself. It is not a charge issue as it has been charging for 2 hours now. I am just sitting on the home screen now and controller is plugged in by usb cable and just keeps connecting and reconnecting but remains on charge when it disconnects. Any help would be much appreciated

    Turn off the PlayStation 4 by pressing the power button on the front panel. The power indicator will blink for a few moments before turning off.Once the PlayStation 4 is off, press and hold the power button. Release it after you've heard two beeps: one when you initially press, and another 7 seconds later.Connect the DualShock 4 controller with the provided USB cable and press the PS button on the controller.Choose option 5 rebuild database.For home hub. Open the web browser on a computer or device connected to your Hub and go to http://bthomehub.home to open the Hub ManagerClick on SettingsEnter the admin password. Unless you've previously changed it, you'll find the default password on your Hub settings card on the back of your Hub. If you have changed it and now forgotten it, you can use the password override feature to set up a new passwordClick on the "Advanced Settings" tab, then click Continue to Advanced SettingsClick on the "Wireless" tabTo manually select the wireless channel for the "2.4 GHz" band:Go to the 2.4GHz page and select a channel from the drop down menu next to "Wireless Channel". First try channels 1, 6 or 11Click Apply to confirm the change. Then wait 60 seconds for your computer to automatically discover the new settings. There's no need to change any settings on your computer 

  • Head phone jack messed up and wont work

    My ipod headphone jack is messed up and it only plays out of one headphone and wont work on the other one what should i do to fix it? please help

    yea... mine is the same way. it turns out i did some investigating on it and the entire jack is loose. when i push the jack backwards, both sides of my headphones work, but it is naturally forwards so only my left side works. and yes, i did try multiple headphones to confirm it isn't them. i might try and use a shim to keep it naturally back so both sides work, but haven't gotten around to it yet. your not the only one

  • Wireless keyboard keeps disconnecting and reconnecting

    My Wireless Keyboard keeps disconnecting and reconnecting and typing by it self!! any ideas?

    Hi,
    Yes believe it or not my problem was caused by the keyboard being too close to the iMac display, the bluetooth was infering with the other radio signals coming from the antenna, it needs to be at least 1ft away from the display (30cm) to prevent this (this won't help those of you with small computer tables/desks)
    Hope this works for you....
    iDave

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I shattered my iPod and wont work. How do i send it in to receive a new one?

    I shattered my iPod and wont work. How do i send it in to receive a new one?

    Since I have no idea which country you are in, I suggest you click on the Store button at the top of this page and then go to your country's store. There, you can find the prices of each and every model of iPod Touch in your country's currency.
    16GB - £199
    32GB - £249
    64GB - £329
    By all means take your broken iPod into an Apple store and see if there is any discount they can offer you.

  • Keeps disconnect and reconnect

    I have a retina Macbook Pro 13"(latest), iPad(3rd genernation), iPhone 5 and iPod shuffle(latest) and I am sure all their systems as well as iTunes on my Macbook Pro are latest version. The thing is that whenever I connect my iPad and iPod shuffle and try to sync using iTunes it just keeps disconnect and reconnect. At frist I thought there might be some problem with my USB port, so I tried both of my USB ports and it keeps behave like that. And the wired thing is, it did not happend to my iPhone 5 so far. So it is most likely that there are problems with the iTunes.
    So I just want to ask is there anyone encounter the same problem and if you know how to fix this problem plsssssss tell me. Thx.

    I think these problems were hopefully solved by recent update of Itunes.

  • Ipad keeps crashing and wont restore

    my ipad keeps crashing and wont restore can anyone help please

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • My iPod got wet, I put it in a bag of rice for 4 days now the Ipod Works in my music player dock, but wont connect to pc and wont work on its own.

    My iPod got wet, I put it in a bag of rice for 4 days now the Ipod Works in my music player dock, but wont connect to pc and wont work on its own.

    Greetings Socs4bill,
    It seems your iPod has been exposed to liquid and is not operating properly. Based on the information you have provided, it appears your iPod needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    Apple - Support - Service Answer Center
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

    My ipod touch 4th generation's home button and lockscreen work perfectly but the screen is unresponsive and wont work whats the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I just tried to install new update and it screwed itunes up and wont work now

    help

    In order to help you, we need more details.
    Errors?
    What app?
    What does "screwed up" and "wont work" mean?

  • Im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP

    im trying to type my password but only zero and nine work I tried restarting but it still wont work have any ideas please answer ASAP

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting

    Hello,
     I have Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting. I have checked my network and its on a 100Mbps link, and stable/no errors logs. This occurs randomly every several minutes. I have a wireshark capture if it helps your team
    analyze the issue.
    Daniel

    I have been meaning to summarise this on my blog for a while - http://www.lync.geek.nz/2014/06/lync-client-constantly-signs-in-and-out.html
    Andrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Check out my blog

Maybe you are looking for

  • Field symbols issue

    Hi, I am new to using field-symbols and having this peculiar problem: In a program, I am dynamically defining a table where employee subgroups will be columns. CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE     EXPORTING       IT_FIELDCATALOG

  • 3 company codes,8 Plants,50 Slocs,19 Sales depots.

    Dear All, Please help us to design the orgn structure of our client. 1.     Our client is having 3 company codes. One has 6 plants and the second one and third company code has one plant each. Total 8 Plants. Storage locations 50. 2.     19 Depots ca

  • Show more columns using HtmlDataTable

    The thing is that this code works...the result is html with one column in each row filled with "col1", "name1", "value1". What I want to do is to get html with three columns with separated strings("col1", "name1", "value1") in each row! What I must t

  • Spotlight not working with External Drive (Wireless)

    I have setup the new Airport Extreme (AE) and connected WD 500GB via USB to the (AE). Spotlight does not recognize the external drive when it is connected to the AE. It will of course work if I directly attach external drive to my Macbook Pro. Any id

  • Font problems with dreamweaver on Mac

    Hi, i installed dreamweaver cs3 as a part of web premium suite on intel mac os x 10.4.10. My international settings are set to Turkish. There are some oddities with fonts. Dreamweaver font list displays some fonts with CE suffix (Helvetica CE, Lucida