Trackpad+keyboard not responding after installing drivers from Leopard DVD

I've just installed the Windows XP (SP2) drivers from my Mac OS X DVD (10.5.2), just sitting and watching as it progressed. When the final notice appears, saying that I am to press "finish" to exit the setup, I discover that the trackpad is unresponsive and so is the keyboard (I have a 15" MacBook Pro). I tried pressing the "shut off" button on my MBP and it turned off immediately. After starting up again I tried to connect a mouse using both USB-ports with no results.
I.e., there's no response from either USB port, nothing from the trackpad and nothing from the keyboard. Please help

Yes same here. Installed new trackpad driver on 18th Dec and the trackpad has had HUGE issues - unresponsive after resuming from hibernation in Vista. Takes about 5-10 minutes to sort itself out. Horrendous!!

Similar Messages

Keyboard not responding after installing Leopard Server

I just upgraded on of our old 10.4 Servers to 10.5 and when it boots up the initial setup screen where you pick the language and enter the serial number, the keyboard doesn't respond. I tried different keyboards, resetting PRAM, single user mode with disk repair and nothing seems to work. Any ideas on why this is happening and how to fix it would be appreciated.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

Firefox Not Responding after Installing Microsoft Office 10

After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
has servral logs for OACoreGroup Servlets that are initialied
2) You might have to enable the debug option in jserv.properties and jserv.conf
(find IsItWorking.java in Metalink for the appropriate note )
3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
pls keep posted about how this issue got resolved.
Sunil
JSP not responding after installing 11.5.10.2 on IBM
HACMP
i have finished installing Oracle applications
11.5.10.2 on IBM clusters (HACMP version 5.1)its a
multinode setup with mutual failover. other
applications are working fine. the installation went
well. but the final part on the middle tier , during
the post install checks it says JSP not responding. I
checked the apache error-log and saw the follwoing
entry
[Sun Apr 23 21:04:21 2006] [error] [client
172.29.200.74] client denied by server configuration:
/appl/oracle/devcomn/portal/
DEV_erpappssrv/oprocmgr-service
>
that bafles me because that ip address was not used
in the installation. its the persistent ip address of
the HACMP. the service ip that was used in the
configuration file was 172.29.200.75
however there is no mention of this in the error
log.i also edited the oprocmgr.conf in the
Apache/conf directory after which i dont get the
error however the servlets pages then hangs and
returns page cannot be displayed error on internet
explorer. no error is registered on the error log.
the jdk am using is 1.4.2 which is the recommended
one.
what this means is that i cannot access the self
service pages and as you know you need self service
pages to access the application in 11.5.10.2
i opened a TAR with oracle on 8th April 2006 and till
today i have not been able to get a solution.
I am hoping that i will get someone in this forum who
has met a similar problem or who has an insight into
how we can solve this problem already am weeks past
the target go live!!!
Please Kindly help
Jeremiah Ochieng

Keyboard not responding while installing Windows XP sevice pack 2

Hi,
I am new to macworld, Just got Macbook and try to use bootcamp to install windows xp, but keyboard did not respond hence got stuck at this point. Please help me. how to make keyboard working while installing windows xp using bootcamp. I know that for non-portable Mac USB mouse and keyboard can be used but whats need to be done for portable Mac like Macbook

I have been scouring the internet on my limited dial-up connection trying to find someone who had a definitive solution to this problem which I too have been stuck with.
What finally resolved this keyboard problem during that critical stage in the win xp setup was by:
1. Going to System Preferences>Keyboard and Mouse and check-marking "USE ALL F1, F2 ETC. KEYS AS STANDARD FUNCTION KEYS (when this option is selected, press the Fn key to use the special features printed on each key)" Before starting up Boot Camp,
2. and Unplugging the Mighty Mouse from the keyboard while my mac was rebooting.
Switching out the apple keyboard for a standard USB keyboard did not work (perhaps in hindsight, i should have plugged it in first before boot camp rebooted and tried to install win xp;)
Attempting time after time again did not solve the issue;
Neither did doing all the software updates, firmware updates and such while borrowing an ethernet cable connection from my local library;
I did not need to find another Win XP with SP2 nor did I need to find a USB keyboard;
Not even updating my Mac OS X from 10.5.2 to 10.5.5 or installing the new firmwares for the Apple aluminium keyboard was necessary it seems.
Just a simple checkmark to make the apple keyboard's F-keys primary and unplugging the Mouse from the keyboard before the WinXP install kicked in, allowed me to press Enter to proceed with the installation.
I also turned off the special functions of the mighty mouse like the center click and roll ball, but I felt obligated to post the solution to this problem - Do as you would be done by.
Hope this helps others who encounter this same problem, please confirm if I am correct. Good luck.

Keyboard not responding after OSX 10.7.4 update

I have just installed the OSX 10.7.4 update.
About 12 hours after installation the screen dimmed with a message that I need to restart the computer. I did so and now after startup I get a message on the screen that the Bluetooth keyboard can't be found. I actually have a hard wired keyboard, not a Bluetooth one, but there is no response to keys on the keyboard and I can't get rid of the screen message, even after a restart.
So I can't start in safe mode or anything like that because the keyboard doesn't work. Any ideas on how to get around this?

Thanks for the suggestions, but the keyboard was connected to a built-in port.
When I came back to the computer about an hour after the problem appeared, the bluetooth message had gone and the normal keyboard was working again, so I could log in. I checked Bluetooth in System Preferences and found there was a "phantom" wireless keyboard listed, that I had never installed. I removed that from the list so hopefully the problem won't re-occur.
Not sure whether this problem was related to the update, but from other posts, it appears to have caused a number of issues.

Storage Provider not responding after installing SCVMM 2012 R2 UR5

After installing UR5 registered storage providers show Not Responding. I had two registered, both scale out fileservers in the same domain as VMM that were working fine before UR5. Sofs running 2012R2 with latest patches
Trying to refresh provider:
Error (26101)
Storage discovery of provider {0869e333-12f6-44c7-b6b7-7139530a18c9} for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 46010.
Recommended Action
Specify valid provider, port and user credentials for storage discovery.
The other one I deleted to recreate it. The deletion yielded:
Error (26312)
Unregistering the storage subsystem with unique ID {bca715fb-ce94-47f5-9558-f8e862c3e7dc}:SS failed from VMM01.hyper-v.blaa.com with error code 46005 [SM_RC_SUBSYSTEM_NOT_REGISTERED].
However the storage provider was removed and now if I run Get-SCStorageProvider i can't see it. When I try to add it back I get an error :-(
Error (26311)
Registration of the storage subsystem ss02.hyper-v.blaa.com for user hyper-v\<user> failed from VMM01.hyper-v.blaa.com with error code 4 [SM_RC_GENERIC_FAILURE].
Not sure what's happening but looking at the roleholder in the storage cluster I have an error in the VMI-Activity log:
Log Name: Microsoft-Windows-WMI-Activity/Operational
Source: Microsoft-Windows-WMI-Activity
Date: 2015-02-23 00:11:52
Event ID: 5858
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: xxx
Description:
Id = {99940B20-4D23-0003-FC56-D599234DD001}; ClientMachine = SS02-1; User = HYPER-V\xxx; ClientProcessId = 332; Component = Unknown; Operation = Start IWbemServices::GetObject - root\Microsoft\Windows\Storage\Providers_v2 : SPACES_StorageProvider.ObjectId="{0869e333-12f6-44c7-b6b7-7139530a18c9}";
ResultCode = 0x80041001; PossibleCause = Unknown
And a Security error:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2015-02-23 00:11:52
Event ID: 4656
Task Category: Other Object Access Events
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ss02-1.
Description:
A handle to an object was requested.
Subject:
Security ID:
HYPER-V\xxx
Account Name:
xxx
Account Domain:
HYPER-V
Logon ID:
0x117FC549
Object:
Object Server:
WS-Management Listener
Object Type:
Unknown
Object Name:
Unknown
Handle ID:
0x0
Resource Attributes:
Process Information:
Process ID:
0x14c
Process Name:
C:\Windows\System32\svchost.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
MAX_ALLOWED
Access Reasons:
Access Mask:
0x2000000
Privileges Used for Access Check:
Restricted SID Count:
0

UPDATE:
Managed to get a window to reboot the storage cluster with the incomplete delete. After rebooting the registration of the storage provider completed and is now ok. Will try to reboot the other storage cluster as well.

MacBook Pro Retina Keyboard not responding after Sleep

Hi,
I am having an issue that I have noticed in Mountain Lion. When I put my MBPr to sleep, either via Apple->Sleep or by Closing the lid (maybe sleep for 5-10 min or more); the Keyboard will not respond at all and cannot enter the Password to get back in.
I have tried to remove the lock screen in order to avoid that but the same things happens for any App that I try to use and requires keyboard. The Apple Magic Mouse works fine, and I have no external keyboard connected.
I have taken it to the Store and the ML was re-installed...still same issue
Anyone had this happen and able to determine the cause?

Just some more info regarding this:
Pressing a key on the usb key board will bring up the log in screen and the mouse works (plugged into the keyboard) but text input from the keyboard doesn't work.

Garageband Not Responding after Installing Pro Tools 8 LE

So, after having installed Pro Tools 8 LE, I want to use GarageBand, and after clicking the icon, it keeps bouncing. The program does not open and on the Activity Monitor it shows and "Not responding". Any ideas? Thanks! I'm running Mac Os X 10.7.5

Que Tal Amigos, en busca de este problema en diferentes foros, me di a la tarea de traducir cada unos de sus preguntas y dudas ya que no se ingles, por lo tanto espero que se den a la tarea de traducir esto a su idioma ya que tengo la solucion de este Gran Problema que tenemos todos los que actiuaizamos a Lion OSX 10.7...buen ahi les va al parecer uno de los drivers midi de las superficies de control o interfaces de Avid 002 y 003 utilizan este para poder utilizar sus in/out midis ya que si tu eres de los que no tiene esta interfase o no utilizas estas salidas y entradas es preferible que borres o cambies de ubicacion a alguna carpeta "como la de Plugins unused" este archivo...Library/audio/mididrivers/DigiDioMidiDriver
este driver es el que crea conflictos entre Garageband,Logic y Protools, hoy lo he echo y todos mis programas van de maravilla...Protools 8.0.5, Logic 9.0.5 Garageband etc...Espero se de gran ayuda ya que estuve por muchos foros y nunca encontre la respuesta,pero mis pocos conocimientos de audio me hiceron llegar a esta conclucion....saludos y Feliz Dia De Gracias......
atte Mexicano Terco....

Bluetooth magicMouse & keyboard not responding after sleep mode

Hello,
I recently upgraded from Lion to Mavericks (10.9.1).
A very annoying bug happens every time the macbook pro exists from sleep mode.
In this situation, when the mac wakes up, Bluetooth devices (magic mouse & wireless keyboard) do not respond. Since I am using the mac in clamshell mode with external monitor, this is very annoying because I have to open the laptop, and turn on/off Bluetooth manually.
Sometimes the same problem arises for the internet wifi connection, which do not reconnect.
I am very surprised of this bug.
Does anyone have the same issue?
I was thinking to do a clean installation, as suggested in some posts, but I don’t believe this will solve the issue.
This issue HAS NEVER APPENED in Lion.
Thanks for support.
Alberto

** SOLVED ***
If you have a early 2011 MBP, the optibay SATA is a 6GB bit is really support 3GB/s only.
If you have a 6GB SSD, install it in the ORIGINAL adapter and the original SSD in the optibay.
This will **SOLVE** the issue.
Alberto

PShop CS2 (Not responding) after installing

I have just reinstalled Adobe Photoshop CS2. It appears to install okay. When you start it up it appears to start okay, the splash screen appears and goes through the start up, that disappears and the normal working page appears, but as soon as I click on any menu,tool etc. it goes blank with the top left corner of the working page showing Adobe Photoshop (not responding). I also tried a "repair" from the unistaller, but no joy.
For info:
I am working on a Dell Dimension 9150 I am running XP pro sp3. AV is AVG and firewall is Comodo. I have never been able to get PShop working on this computer, so I don't think it is a PShop problem. I have stacks of disk space, and 2Gb RAM.

Presume you have solved this but if not, uninstall PS2 ( I also unistalled all other versions I had PS5, etc), re-install, then install 9.02 update.
Did all this then accessed CS2 - no probem.
Think it may be a multi-processor problem.

SAP B1 always not responding after install in Windows 7

Dear All experts,
I have one client machine after change to Windows 7, the client SAP B1 always show not responding or seems like "freeze", cannot do any thing while user only open some marketing document. But the othes application like Ms Office or others than SAP B1 still can be respone.User have to end process the SAP B1. Sometimes it will create the dump file. Only user's machine with Windows 7 will happen this, others like Windows XP does not facing this problem.
This issue happen since user change to new machine with Windows 7. Previously, user is using Window XP and does not happen this issue. The current version is SAP B1 2007A SP01 PL 7. The work around we have done is check the FMS, addon, and reformat the machine to reinstall Windows 7, turn off UAC setting. Please advise.
Thanks & Regards
Angie

Hi,
What windows 7 edition are you using and is it one of this following :
- Professional, Enterprise & Ultimate
Edition
if yes, it is okay that you have done the work around. I suggest to consider the sql native client (sqlnc) installation. Use the correct version of sqlnc. you use 2008 version for SQL 2008 and 2005 version for SQL 2005. Also, check if you have installed .net framework 1.1 or 2.0.
What about the PC hardware and software spec. are you using B1 system requirement guidance ?
Many causes that make slow performance in B1 especially when you are using B1 2007A SP01 PL07. I said that because it is the previous PL that approved by SAP to use in win 7. So, try to upgrade to latest PL i.e. PL11. See if the problem still persists. Let's know if persists.
JimM

Why do my FaceTime and webcam not respond after installed mac os 10.7.2??please help me to solve it!!thank you!

I spent my SG$39.90 to purchsed a new version of mac lion 10.7.2. But sadly, after installed i could not open my webcam or facetime.It is very frustrating and making me very upset due to this situation.If i know like this i would never purchased the new Mac lion version!please help me to solve this problem!thanks!

You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

JSP is not responding after Installing oracle Apps 11i

Hi,
I installed Oracle Applications successfully on my PC with Windows XP OS.
I used expess installation for the VIS database.
After installation all Post Install checks passed except for "JSP is not responding"
checking URL = http://kanaan.mydomain:8003/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=E:\oracle\visappl\fnd\11.5.0\secure\VIS_kanaan\vis.dbc
JSP is not responding, waiting 15 seconds and retesting.
Anyhow if I log to http://kanaan.mydomain:8003 I am being directed to a page showing :
"Oracle Applications Rapid Install Portal"
Kindly advise how to check what is wrong with JSP and how to fix.
Thanks in advance
AK

Hi,
All services are starting properly with no errors
when opening the page "http://kanaan.mydomain:8003/oa_servlets/AppsLogin"
, i recieve the error :
The webpage cannot be found
HTTP 404
Most likely causes:
There might be a typing error in the address.
If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to kanaan.mydomain:8003 and look for the information you want.
More information
Apache is running in process manager.
In apache log file the last few lines are :
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Wed Feb 28 09:56:55 2007] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Wed Feb 28 10:27:08 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:08 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:17 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:17 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 10:27:27 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:27 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:43 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:43 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 10:27:48 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 10:27:48 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 11:54:28 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 11:54:28 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:12:21 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:12:21 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:56 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:56 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 12:13:59 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 12:13:59 2007] [error] [client 192.168.254.5] File does not exist: /servlets/weboam/oam/oamLogin/oam/oamLogin
[Wed Feb 28 13:57:23 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 13:57:23 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
[Wed Feb 28 15:35:40 2007] [error] OPM:Can not find one alive process
[Wed Feb 28 15:35:40 2007] [error] [client 192.168.254.5] File does not exist: /oa_servlets/AppsLogin
When running the command "ps -ef | grep -i apache":
C:\Documents and ettings\Administrator>E:\oracle\visora\iAS\Apache\Apache\bin
'E:\oracle\visora\iAS\Apache\Apache\bin' is not recognized as an internal or ext
ernal command,
operable program or batch file.
Also apache is running in the processes.
Kindly advise and thanks for your help

Illustrator CS4 application not responding after install

Anyone knows how to slove this problem? I got the creative suite CS4 today and after installed dreamweaver, photoshop, acrobat reader works fine and fast except illustrator. When I opened the application and click on open a file or create a file, the application will show "Not Responding".
Anyone know how to solve it? I am using vista

Wade,
You said that Adobe's employees come and visit this forum. And you are right, Adobe's employees disguised as a regular users are here all the time.
When the CEO said Adobe hired Low Level employees I did not know then what he meant. Now I know is for damage control.
I am not only one as you can only wish. Go to Adobe Feedback forum: http://forums.adobe.com/community/general/adobedotcom_feedback
Afraid of the wolves?
Can count higher than 1000.
But you have not answer the question. Where is the CS4 update?

Program not Responding after installing PSE8

I recently upgraded to PSE8.
Since then I have noticed that when I go to shutdown my system (XP w/ SP3) I get
a window indicating a program is not responding. The title of the window is
'End Program - 9c0'. The '9c0' part is not always the same.
Last night it was 960. I've checked before the shutdown to see if there is any application
or process with a number like that and I have never found one.
I believe I keep my system free of viruses, etc. but I did do a complete virus scan
with Avast as well as Symantec. Plus spyware checks by AdAware and SpyBot.
I'm wondering if anyone else has noticed anything like this?

I have the same problem. I'm running XP SP/3, and after I installed PhotoShopElements my machine hangs at shutdown until I kill a running process. The problem goes away if I stop ElementsOrganizerSynchAgent.exe. So for now, my solution is to set the service to start manually.
Any chance of getting a fix? The program I assume performs a needed function, and I'm now without it.
Alan Stone

Trackpad+keyboard not responding after installing drivers from Leopard DVD

Similar Messages

Maybe you are looking for