Trackpad physical click broken after 10.8.5 update

Yesterday, I did the suggested 10.8.5 update on my one year old MacBook Pro Retina. Since the update, the physical click-action of my trackpad no longer works. I saw similar problems reported here before, but an OS-update can't thicken the battery? The battery reports no issues and works well as ever. I am far from any Apple store with Genius bar or Apple dealer, so what could I try to get the trackpad working again?
Thanks!

Similar Messages

MacBook Pro with Retina 13" Late 2013 thunderbolt port broken after 10.9.4 update

One of Thunderbolt Port (near USB port) was broken after 10.9.4 update.
I usually use mini Display Port to Display Port cable to connect my external screen, it works fine before 10.9.4 update. After 10.9.4 update, I tried to connect the external screen with the same cable, and the main screen of my MacBook Pro with Retina Display twinkling once so I'm sure the external screen was identified, but no video signal output.
I went to local Apple Premium Reseller (there is no Apple Store in Taiwan) and the they told me all of Thunderbolt Port was fine, they test with their own 10.9.2 copy and it seems ok. After that, I tried to re-install 10.9.4, downloading directly from Apple, the system re-install progress was complete but the Thunderbolt Port issue still there.
I connect to the broken Thunderbolt Port with Thunderbolt to Ethernet adapter, and it works fine, so I believe the only problem is that there is no video signal output from the Thunderbolt Port (near USB port one).
What should I do now?
Model: MacBook Pro with Retina 13" Late 2013

I can confirm that problem, too: Im' working with a Dell U2713HM display, connected via display port. Since 10.9.4 Update i'm experiencing random black screens and/or display going to energy saving mode. Today i've had this issue twice: Display going black and after disconnecting the macbook von all cables screen of the macbook remaining black. Holding Power Button for about 10 s restarts the macbook. After 5 minutes the same problem appeared again.

TrackPad physical click not working after upgrade to Mountain Lion

Does anybody know how to get my trackpad working again after upgrading to Mountain Lion?
I recently upgraded my MacBook (13-inch, Late 2009, Intel Core 2 Duo) from Snow Leopard to Mountain Lion. Everything seems to have gone well, except for trackpad behavior.
The primary problem is that the physical click of the trackpad is now erratic. Sometimes a physical click will work, and other times it will not work.
Note: The "tapping" of the trackpad DOES work consistently. I have confirmed that System Prefs > Trackpad > "Tap to Click" is enabled, and so tapping is not the problem. (The "tap to click" selector does exhibit a unique behavior however--if I DESELECT "tap to click," then the physical click no longer works at all. It looks like the "tap to click" selector can completely disable the physical click of the trackpad, but cannot enable the physical click completely.)
I have also checked the settings on System Prefs > Accessibility > Mouse & Trackpad, but none of those settings affect the physical click of the trackpad.
I tried zapping the PRAM, but that did not change the problem with physical clicking on the trackpad.
Grateful for any ideas...
Nertz

I ended up taking my MacBook to the Apple Genius Bar. The staff were very helpful.
The apple staff said that there is no known link between the upgrade to Mountain Lion and trackpad misbehavior. In my case, they made some hardware adjustments to the trackpad, and all is working properly again.
Bottom line: if you think that your trackpad misbehavior is related to Mountain Lion, you might want to take it to an Apple Genius Bar. If there really is no connection between Mountain Lion and trackpad behavior, then perhaps they can fix it for you (as happened to be true in my case). But if there IS a connection in some way, it would be helpful for Apple employees to see your evidence firsthand.
Best wishes to all...
Nertz

Issues with Trackpad - Physical click - Macbook pro 13"

Hi everyone!
I have a problem with my trackpad, my macbook pro its about one year old and i rarely use a physical click, few months ago i had to use bootcamp with windows xp and i use the physical click there, i use it about a month only.
Now i have to press harder to use it (in MacOS snow leopard) because if i click like always nothing happen i hear the click but no actions on my display, the soft click functions work properly but im worried about the physical click.
Sorry for my terrible English and thank you in advance.
Regards!

Hi!
Well for me theres 2 types of click,
1. one when u click and sounds (this one is pressing harder the trackpad)
2. another is softer when just need to put ur finger over the trackpad.
i use more the second one, thats why i say i rarely use the first one.
Thanks for answering
Regards

Intermittent Trackpad on 15" MBP (after 10.6.4 update?)

This is either a hardware fault on my machine -- a June 2009 15" MBP -- or something connected to the 10.6.4 update (or the magic trackpad update that brought inertial scrolling to the last few MB/MBP refreshes).
Short version: when tapping to click -- like on a bookmark in the bookmarks bar in Firefox or Safari -- something strange happens. The tap is recognized, but the link isn't actually "clicked". The background of the link changes to a darker shade like it does when you click on it, and it stays that way as long as the cursor is hovering over it, but the browser doesn't actually go to that URL.
The bookmarks bit is just an example; the same click-but-not-click happens on links and buttons from time to time. Kind of a pain in the ***.
I don't remember this happening before 10.6.4, but I could be mistaken. I notice it more often with tap-to-click (possibly sampling bias... I tap to click more often than I physically click anyway).
Not using any third-party trackpad utilities.
Anyone else notice such a thing?

Well, so far things seem better, although I'm not sure if the word 'fixed' can be used just yet. I've been using my macbook pro i5 (2010) for about 10 hours and had no problems with the trackpad since the 10.6.5 update until just a few minutes ago when the cursor jumped and right-clicked all by itself as it would do since that unfortunate trackpad update which was causing so many problems. I've just now turned off the one-finger dragging to see that will help, but have kept the one-finger tap and right click. I'll see if things settle down or go back to trackpad craziness again . . .

Clicking noise after downloading the security update...

Hi,
I was wondering if anyone else's MacBook has a clicking noise after they did the system update for the security,sounds like it is coming from the top right hand corner.
If anyone knows what might be causing this problem, do let me know.
Thanks,
Sam

Could the noise be coming from the hard drive (lower right corner?)
And, is the 'click' the same sound that the HDD makes once, normally, just before the whole computer turns off during shut down or sleep?
My clicking HDD began right after downloading the last Security Update (the one released in May), but I concluded that was just a coincidence. Nevertheless, when I installed yesterday's security update I couldn't help but secretly hope it might stop the clicks. No such luck... I still doubt it has anything to do wuth it. Just thought I'd ask...

DVD export broken after 10.0.1 update

A project which I have previously exported to DVD in Final Cut Pro 10.0 can no longer be exported after 10.0.1 update.
The symptom is that, athough it plays back fine in the Viewer, after doing Share -> DVD, the burned DVD ends up with these choppy sections where it loops the same 0.3 seconds or so over and over. This occurs after about 4 minutes of playback (it is an 8 minute video).
I've burned multiple DVDs, and deleted the projects render files and re-rendered, and tried multiple DVD players, all to no avail.
This is my first attempt to burn a DVD since applying the update from App Store, which is why I surmise the update may be involved.
Visually it looks a lot like a disc with a bad scratch where it gets in a loop. But as far as I can tell, Final Cut Pro is actually burning the DVD fine, and it is actually writing the same 0.3 second of video over and over. That is, if I put it into a DVD player, I can fast forward from 03:00 to 07:00, and it is still looping the same snippet of video.
Has anybody seen this problem? Any advice for how to fix. Thanks.

This may or may not be related, but its worth mentioning as it relates to what may be a change in the update. I did a test export "Share" > "DVD..." on a project. It worked very well. DVD played just fine on a few devices.
Same project after the update and it fails to share a DVD now. It opens the Share Monitor app and after a few seconds FCPX shows me this:
First, lets take a moment to appreciate the inherent humor in FCPX telling me I've failed. Funny. Moving on...
Restarted FCPX - no change.
Deleted "Shared Items" folder, in my FCP Project folder - no change.
Restarted Lion - no change.
Realization iLife in Lion no longer comes with iDVD - not happy.
Any advice?

IPod Scroll Wheel/Clicker Broken after Headphone jack replacement.

After loosing audio in 1 channel of my iPod Video I did some research and realized that I needed to replace the headphone jack/hold switch piece.
I ordered the piece online today, followed the online tutorials, put my iPod back together and now the scroll wheel and clicker doesn't work.
What do I do?

its a 10 gig

Remote desktop broken after 10.9.3 update

After the 10.9.3 update, remote desktop is completely broken...
The ard status monitor display : Apple Remote Desktop is disabled. I try a clean install (app + system library coreservice remote management + user library pref ans aap support deleted.
After the Remote Desktop 3.7.2 installed from the Apple Store when i try to launch the application i get this message : The remote desktop client does not mach the administrator software version. Check for update.
And this is the problem : there is no updates available !!!!
I have try to install some 3.7.1 client from some dmg, but all false : ARD agent validate multiple error ( on log) error 6405, fatal error 5, error 100, error 6404, broken pipe, fatal error 0
Now i am back to the clean uninstall and with the new Remote Desktop 3.7.2 with the desktop client not matching and not running...and without any update available.
thanks for help !

Nice idea and helping really !!!!
On safe mode, i could install an old remote desktop client (3.6.x) - and the client works fine as client.
Next i get the last Remote Desktop Admin from the Apple Store and it run also always in safe mode. No error, but all my setting were lost. With the Remote Desktop Admin running i created a new client installer and quit the Admin app for updating the client to the last release (3.7.1). I test all in safe mode (running as admin and as client) and finally reboot the computer to quit the safe mode.. and finally all was running again.
I don't know why during the 10.9.3 update Remote Desktop was corrupted...
Now i need to put back my remote client, but this not really a problem.
Thank a lot th Deadzak for his genius intuition.

Quicktime X broken after security and Safari updates.

Ran software update yesterday and updated Safari to 5.1.1 and got the latest security update. Now Quicktime X is broken. Still have the app but the icon is missing and it won't start. My old QT 7 still seems to work fine. Tried repairing permissions and restarting several times. Any other ideas? Wish they would just allow us to download and install QT X...

Sorry to say but this did not work for me. I was able to find an installation of QTP 7.6.4 (which still has the Quicktime Preferences menu option). However, I was not able to install the older version of QTP even after trashing QTP app, and its associated preference files and rebooting my MacBook Pro. The installation program displayed a message that a new version of Quicktime was detected and would not allow me to continue the installation of the previous version. I then found a program called Pacifist http://www.charlessoft.com/ that allowed me to do the installation.
My reference movies are now behaving as they should. Unquestionably there is a problem with Quicktime Player 7.6.6 which Apple really should address right away.
BTW, after doing this, my Pro key seems to be intact. I just purchase Final Cut Studio upgrade. I guess I leave QT 7.6.4 and ignore software updates fopr Quicktime until I see 7.6.8.
Unfortunately, I'll have a difficult time explaining this to my clients. In effect, this screw up by Apple makes it inadvisable for me to provide reference movies with alternates for my clients.

Switchable graphics option not showing in right click menu after windows 8.1 update

I have a Pavilion 15 e016tx laptop. i have recently updated my laptop to Windows 8.1. After updating i am not able to find switchable graphics option which was earlier shown on after right clicking on desktop. I tried to search in shearch charm but couldn't find.
Please help me.

I found Catalyst control center but it shows a alert message " AMD Catalyst Control Center cannot be started. There are currently no setting that can be configured using AMD Catalyst Control Center". Please help.

Bonjour broken after 10.8.5 update

I have a home network consisting of 4 Macs. 3 are running the latest version of 10.6. The fourth computer, a MacBookPro 4,1 (early 2008) is running 10.8. After installing the 10.8.5 update on the MacBook Pro, I'm now unable to connect to the other computers on the network via Bonjour, or to see/print to any shared printers. None of the other computers have any trouble seeing one another or printing, the MBP alone seems to be the issue. I can ping other machines from the MBP, and Remote Desktop works.
I've tried switching wifi on/off, rebooting, deleting the network location and recreating it from scratch, and flushing the cache using dscacheutil, all without success. I'm able to see the shared computers in the sidebar in the Finder, but if I click on them the connection times out.

Bomjour is mDNSResponder. They're one and the same.
Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Magic Mouse stopped right clicking right after 10.8.4 update

My computer just performed the latest update to OS 10.8.4 and now my "Magic Mouse" won't right click, even though right click says it's enabled. Please help!

Try deleting the .plist.
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences. Move the .plist to your desktop.
Restart
If it works, delete the .plist on your desktop. If not, put it back.
If you prefer to make your user library permanently visible, use the Terminal command found below.
http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

IChat Server broken after 10.6.3 Update

Jabberd is unable tostart after the update. Any ideas?
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'in-sess' (order 11 index 12 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'deliver' added to chain 'in-sess' (order 12 index 13 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'session' added to chain 'in-router' (order 0 index 14 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'validate' added to chain 'in-router' (order 1 index 1 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'in-router' (order 2 index 12 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'in-router' (order 3 index 2 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'out-router' (order 0 index 2 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'pkt-sm' (order 0 index 0 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-ping' added to chain 'pkt-sm' (order 1 index 6 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-time' added to chain 'pkt-sm' (order 2 index 15 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-version' added to chain 'pkt-sm' (order 3 index 16 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'amp' added to chain 'pkt-sm' (order 4 index 9 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco' added to chain 'pkt-sm' (order 5 index 8 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: version: jabberd sm 2.1.24.1-326.5+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:32:38 rudi jabberd/sm[41756]: shutting down+
+Mar 30 19:32:38 rudi org.jabber.jabberd[41754]: ERROR: router died. Shutting down server.+
+Mar 30 19:32:38 rudi com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 10 seconds+
+Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[E]: Error -- jabberd service failed to start+
+Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[W]: some jabberd processes failed to start+
+Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...+
+Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[N]: jabberd service shutdown completed.+
+Mar 30 19:32:48 rudi servermgrd[82]: servermgr_jabber[E]: Error -- failed to start service: jabberd+

I'm sorry, the copied Log doesn't reflect the Problem, here we go again.... So why is jabberd connecting to localhost again? I can't get this to work right now...
Thanks in advance,
Thomas
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: starting up+
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: modules search path: /var/jabberd/modules/jabberd2+
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: initialized auth module 'sqlite'+
+Mar 30 19:41:02 rudi jabberd/sm[42094]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:02 rudi jabberd/sm[42094]: shutting down+
+Mar 30 19:41:02 rudi jabberd/s2s[42098]: starting up (interval=60, queue=60, keepalive=0, idle=86400)+
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: [domainname] configured; realm=domainname, registration disabled+
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:02 rudi jabberd/c2s[42096]: shutting down+
+Mar 30 19:41:02 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:02 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
+Mar 30 19:41:02 rudi jabberd/s2s[42098]: connection to router closed+
+Mar 30 19:41:02 rudi jabberd/s2s[42098]: attempting reconnect (3 left)+
+Mar 30 19:41:04 rudi jabberd/resolver[42093]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:04 rudi jabberd/resolver[42093]: shutting down+
+Mar 30 19:41:04 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:04 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
+Mar 30 19:41:04 rudi jabberd/s2s[42098]: connection to router closed+
+Mar 30 19:41:04 rudi jabberd/s2s[42098]: attempting reconnect (2 left)+
+Mar 30 19:41:06 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:06 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
+Mar 30 19:41:06 rudi jabberd/s2s[42098]: connection to router closed+
+Mar 30 19:41:06 rudi jabberd/s2s[42098]: attempting reconnect (1 left)+
+Mar 30 19:41:08 rudi jabberd/s2s[42098]: attempting connection to router at 127.0.0.1, port=5347+
+Mar 30 19:41:08 rudi jabberd/s2s[42098]: [4] [router] write error: Broken pipe (32)+
+Mar 30 19:41:08 rudi jabberd/s2s[42098]: connection to router closed+
+Mar 30 19:41:08 rudi jabberd/s2s[42098]: shutting down+
+Mar 30 19:41:08 rudi org.jabber.jabberd[42092]: ERROR: router died. Shutting down server.+
+Mar 30 19:41:08 rudi com.apple.launchd[1] (org.jabber.jabberd): Throttling respawn: Will start in 4 seconds+
+Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[E]: Error -- jabberd service failed to start+
+Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[W]: some jabberd processes failed to start+
+Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[N]: waiting for jabberd to finish shutdown...+
+Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[N]: jabberd service shutdown completed.+
+Mar 30 19:41:11 rudi servermgrd[82]: servermgr_jabber[E]: Error -- failed to start service: jabberd+

Automatic sleep broken after 10.5.7 update

Hello,
Since I updated my 10.5.6 system to 10.5.7, the automatic sleep function doesn't work anymore. Screen goes black but harddisk keeps running (little light doesn't pulse).
I tried to repair permissions, reset SMC like described elsewhere in the forum, without any success.
Finally, I reinstalled 10.5 using the "Archive and install" option. Then applied the 10.5.6 combo update. And automatic sleep worked again.
After a few days, with the coming of Safari 4.0 final version (which only work with 10.5.7...), I decided to give it a try and applied the 10.5.7 combo update.
And guess what...
Automatic sleep is broken again...
If anybody has a solution, I would be happy to read it.
Thanks in advance

Some clues point to my external LaCie DVD±RW DL...
As long as it is connected to my MacBook, automatic sleep doesn't work. A green light is flashing at regular intervals, which indicate some sort of activity that could prevent the MacBook to sleep automatically.
To confirm this, I disconnected the external burner and... automatic sleep was working again. I checked the availables updates on LaCie website, but it seems that my burner's firmware is up to date.
I've sent a support request to LaCie, hoping they could do something about it.

Trackpad physical click broken after 10.8.5 update

Similar Messages

Maybe you are looking for