Trackpad Sensor Not Working in Curve 9220

Hello friends,
In my blackberry curve 9220 sometime trackpad sensor not working....
So, please give me the solution of above problem and tell me what should i do for this problem.
Fast solve this problem as soon as possible.
Thanks in advance...

yes because track pad is sensitife, try using like rubber to touch your track pad

Similar Messages

  • BBM not working for Curve 9220 after updated to 7.1 Bundle

    Can anyone help me how to have my BBM working after I made some update with my software to 7.1 please help....

    Hi felbenmark
    Welcome to BlackBerry Support Forums
    If you have Updated your Device Software then try those steps , see if that helps :
    1- Register your Handheld .
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    2- Resend your Service Book
    KB02830 Send the service books for the BlackBerry Internet Service
    3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back  
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • 20 days old curve 9360 scrollpad/trackpad is not working

    Hi,
    I bought Blackberry curve 9360 20 days ago through flipkart. From yesterday my mobile's scrollpad/trackpad is not working. What should I do now? If I visit any Blackbery service center will I get my mobile replaced. I am in Bangalore. My contact no: **Removed**.
    Please call or mail me for suggestions/solution.
    Edit: Phone removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

    jaypee23 wrote:
    Hi @mondi21, 
    Yup I did hard reset multiple times, but no use. I don't use phones when my hands are wet.
    Thanks for the suggestion.
    Atempt to boot in Safe mode and see if you can use the trackpad. See KB17877
    Good luck!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • HELP! MY TRACKPAD IS NOT WORKING

    GUYS. PLS HELP. MY TRACKPAD IS NOT WORKING IM USING BB CURVE 9300. IM FROM THE PHILIPPINES. BUT MY MOM BOUGHT AT SAUDI ARABIA. TODAY, IM PLANNING TO GO IN A SERVICE CENTER IN ORTIGAS. AS PER CONVERSATION TO THE CELLPHONE TECHNICIAN. IT WILL COST 800. IS IT TOO EXPENSIVE? HELP! IS THERE ANY OTHER WAY AROUND???

    Use the tab key to navigate around the Bluetooth Assistance screen and the spacebar to enter/select.
    If the tab key doesn't move to all controls then press Control FN F7   one times and try the tab key again.
    Regards,
    Captfred

  • IPhone 5 proximity sensor not working! (iOS 6.0.1)

    iPhone 5 proximity sensor not working! (iOS 6.0.1)
    When I call , the screen is not locked(

    Remove any screen protectors and cases, does the problem continue?

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My mac fall and now the trackpad is not working?

    So today my macbook fall and the bottom left part of the trackpad is not working . I can still move the cursor, but if I click on the bottom left corner of the trackpad, I cannot tap the other trackpad part, it will not respond. To make it respond again, I need to click on the bottom right corner of the trackpad,  so I can tap the other trackpad parts. In short, I must TAP to click, I can't click on the bottom left corner. The secondary click (bottom right corner or two fingers tap) works fine.
    There's no Apple Store in my city (or even country, I live in Indonesia), I just have an Apple Reseller on my city. What do I need to do?

    I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device.  Also, actually freezing your iPhone may very well itself cause damage.
    If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally.  You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
    If it has internal damage, since you dropped it, your warranty no longer applies.  Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling).  You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

  • Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

    Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue?  I have applied all Mac updates and still having problems with the trackpad.

    The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
    You can try doing a SMC reset however I don't think that is the solution.
    SMC RESET
    • Shut down the computer.
    • Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    • On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
    • Release all the keys and the power button at the same time.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    • Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    • Release the keys.

  • My trackpad is not working in bootcamp 4.0 with windows 7

    I just purchased an iMac and upgraded to Lion.  I then created a bootcamp partician and installed Windows 7 Professional.  Everything went smoothly until the trackpad driver was installed.  It failed.  The trackpad will not work.  I have tried to add it through the Bluetooth interface, but I get the eternal circle of **** from Microsoft...Not much of an improvement on the old hourglass of ****.  Anyway, please help get this driver updated for bootcamp so I can use my trackpad.

    I think that has always been a problem at times. though surprised.
    I would assume disabling and then reinstalling or along those lines.
    Uninstall the driver Apple has or see if you can "rollback" in Device Manager.
    Startup items from msconfig would be one place.
    I assume you can do a safe boot / boot from Windows DVD and restore to point prior to this / if you have Snow Leopard use 3.0 thru 3.2 drivers instead

  • My trackpad is not working properly and my battery won't charge

    Hi guys, yesterday my macbook probably suffered electrical shock and now my trackpad is not working properly, it's a bit slow and my battery won't charge. and also ethernet port is not working but wi-fi is , can you help me please ?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, you may have to take the computer to the Apple store to have the computer and battery checked out.
    Best.

  • My trackpad is not working properly since installing the upgrade. What should I do?

    My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

    i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

  • My trackpad is not working on touch.I have to press it.then the things are selected.

    my trackpad is not working fine.I have to click to select the things.Earlier it was simply works like as a touch .What shall I do??

    System Preferences > Trackpad > Point & Click
    Uncheck all boxes and recheck them.
    Restart.
    Try the suggestion in this article. That may help.
    http://support.apple.com/kb/TS1248
    If not, contact the store from where the computer was purchased.

  • My trackpad is not working properly already. Is it eligible for replacement?

    My trackpad is not working properly sometimes and it takes too long for my macbook to open

    Whether your MacBook is legible for a replacement depends on the products warranty...
    When did you purchase the product? Was it a new purchase or a second-hand purchase?

  • My trackpad is not working it moves the arrow but I cannot click on anything or drag anything

    My trackpad is not working on my MacBook pro. I can get the arrow to move but I cannot open files or drag files when I click.

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the Lion recovery partition, if present.

  • My trackpad is not working. Any help?

    This morning my iMac alerted me to change my batteries, which I have done. However, the Trackpad is not working. It is not a problem with the Bluetooth because my keyboard is working just fine. After restarting the computer, I tried turning on the trackpad. The green light did not flash. The Bluetooth Assistance did turn on, however. I cannot access it for obvious reasons. Is there anyway I can set up the Bluetooth using my keyboard?
    I have an old wireless mouse that i used on a computer I owned about four years ago. Will that work?

    Use the tab key to navigate around the Bluetooth Assistance screen and the spacebar to enter/select.
    If the tab key doesn't move to all controls then press Control FN F7   one times and try the tab key again.
    Regards,
    Captfred

Maybe you are looking for

  • CD-R attempted burn fails

    I'm trying to burn some pictures onto a CD-R from my burer on my Powerbook. The burner is a Matshita DVD-R UJ-815. When I attempt to burn, my computer says that either that an unexpected error has occurred, or that there is a communication error. I'v

  • Error OGG-01168 abending replicat process

    Hello All, Greetings ! I have tables that do not have any unique key in source and target database. Replicat process work fine in this case for some tables but for certain table it stops. and generates error: "ERROR OGG-01168 Encountered an update fo

  • Photo sorting criteria 9.2.1

    I think we have all noticed the change in the photo sorting criteria with the new 9.2.1 version of iTunes. Before, sorting was alphabetical. Now, it is by "date last changed" of photo. If you do not have iPhoto, there appears to be no way to change t

  • Could not decode JSON in Flex 4.5.1 [UPDATED w/ full source code]

    Main Thread (Suspended: ReferenceError: Error #1065: Variable com.adobe.serialization.json::JSON is not defined.)          Test/onLoad          flash.events::EventDispatcher/dispatchEventFunction [no source]          flash.events::EventDispatcher/dis

  • How to perform system copy using standard sap method (sapinst)

    Hi guys pls tel how to perform system copy using standard sap method (sapinst) and to perform enterprise portal RESTORSTION. thanks kamal