Trackpad will not response with bluetooth?

Hi Guys,
My iMac was being slow so I re-booted it and now my Trackpad won't recognize  Bluetooth?
I've tried re-booting again and get the same thing.  My batteries are fine and now I can't seem to do
anything cause I've got no curser to do anything with.
I'm hoping someone can help me out.
Thanks,
Paul

This is a warranty issue.
According to reports, the problem can be avoided (not solved) by using the power button to wake the system, instead of the trackpad or keyboard.

Similar Messages

  • My new Iphone 6 will pair with Range Rover but the phone will not work with bluetooth

    Does anyone know if Apple is resolving this issue?  The Range Rover service people don't know how to resolve this.

    I Have the same issue.    my phone worked until I updated to v8 software on iphone 5.   Now it won't pick up contacts and I cannot make a hands free call while driving.    My car dealer Taggerts of Motherwell have said the Range Rover software is not up to date and the phone won't work properly until it is.      

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • Bluetooth will not pair with Moto Droid4

    My Droid4 has will not pair with either my "Verzion" Jabra VBT-4050 nor my Jawbone Icon.  Both these earpieces paired with this phone before, but will not now.
    Makes no sense to me.
    Thanks...Andy

        westa510b,
    That can certainly be confusing since it previously paired just fine with your device. We will be happy to take a closer look at this matter with you. Have you attempted to reboot the device? Tried deleting the bluetooth connection from the device, then re-establishing connection? Any changes recently to the devices software or additions of an application when you first noticed this issue began?
    EfrainM_VZW
    Follow us on twitter @VZWSupport

  • HT204368 bluetooth stopped working and now will not pair with any of my devices ?

    bluetooth stoped working and now will not pair with any of my devices? any suggestions?

    Hello, oscar302. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you may find helpful with this issue.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    Cheers,
    Jason H.

  • My iPhone 4S Bluetooth will not connect with either my iPad1, MacBook Pro or Automobile BT.  Suspect a stack issue in new BT 4.0 (BTLE) release. Has any one discovered fix to this. I have tried this with two separate 4S phones and have same problem..

    One further clarification. I am most concerned with connecting with BT in automobile. I can use WiFi to tether to my other devices.  I cannot change the car very easily! My iPhone 3G had no connection issues.

    I'm new.  Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
    When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW.  VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great !  So, back out to the car & it would not pair, still.  So ... can't be the phone , right.  Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine.  So ... it's my car.  So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair.  They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
    pair with the second GTI just fine.  They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine.    So ... ????????????????
    They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ???  I'll get back to you.

  • My Iphone 6 will not sync with the bluetooth in my car.  2010 Mercedes-Benz

    My iphone 6 will not sync with the bluetooth in my car. My car is a Mercedes 2010 GLK350. Anyone having this problem and if so is Apple working on it?

    Hey blud57,
    Thanks for the question. The following resource outlines information and troubleshooting steps if you are having issues with your car stereo connection:
    iOS: Troubleshooting car stereo connections - Apple Support
    http://support.apple.com/en-us/ts3581
    Additional information:
    If you can’t use a Bluetooth accessory or car kit - Apple Support
    http://support.apple.com/en-us/HT6473
    Thanks,
    Matt M.

  • 525G2 will not pair with one of my Bluetooth headsets

    My Voyager Pro+ died last week and now my 525G2 will not pair with a Voyager Pro UC that I had laying around.  It can see it, but when I enter the PIN code it says that it will not pair.  The same headset will pair with my cell phone, so i know it's not the headset that is the problem.

    What is an "expense bluetooth". Does it have a brand name and model number? is it compatible with the iPhone? Have you put it in pairing mode and paired it with the iPhone? Has it ever been paired with another device?

  • I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    I can detect my Bluetooth devices using a BLE scanner and it says they can be connected but - My 5S will not pair with these devices

    What devices?
    Iphoen supports bluetooth for stereo headsets/speakers, handsfree telephone devices, some keyboards, some apps from the app store and interenet tethering if provided by your carrier.
    It does not connect to computers, other phones,etc.

  • HT2188 my iPhone will not pair with my bluetooth even though it finds it available? any ideas?

    My iPhone will not pair with any of my bluetooth devices even though it recognizes them.  any ideas?

    iPhone supports a limited Bluetooth profile
    Check this list and your other Bluetooth devices
    iOS: Supported Bluetooth profiles

  • IPhone 4 Bluetooth will not pair with Jawbone Icon,  Jawbone 2

    Just got my iPhone today and am more or less thrilled to have it. The only problem (other than the antenna issue, which the bumper fixes beautifully) is that Bluetooth will not pair with any of my Bluetooth devices. When I turn on Bluetooth on the phone and turn on the headset, iPhone says it's "searching.." and "now discoverable" but it never discovers anything, let alone pair up. The Bluetooth on my MacBook recognized the iPhone and I was able to pair them, but no luck on the Jawbones. Sounds like a JB problem, but I'm wondering if anyone has had this problem and if there's a fix via the iPhone.

    On the icon, turn it off and hold button down while sliding the power switch on. This should put it in pairing mode. Then go into your i4's bluetooth menu and give it another go. Also, Jawbone has recently updated the firmware for the Icon so you need to load it as well. I have the icon and a Jabra cruiser and both work/paired fine. You may want to try rebooting phone and retrying as well.

  • Plantronics bluetooth will not synch with iPhone5

    My iPhone5 will not synch with my Plantronics Bluetooth.  I turned on Bluetooth earpiece and turned on Bluetooth on phone, but phone just says "searching...".  I have tried turning off both devices and starting over again, but nothing happens.

        @WaffleRama
    Let's get your Plantronics Bluetooth connecting with your iPhone 5 again!  Which model Plantronics Bluetooth device do you have?  Did you purchase the Bluetooth earpiece from Verizon Wireless?  I want to ensure your Bluetooth device is compatible with your iPhone 5 http://vz.to/17gdz1g.
    Have you paired this specific device to your iPhone 5 in the past?  If so, is it still listed as a paired device in your iPhone 5?  If so, please delete the paired connection http://vz.to/14XFUsZ, then re-add http://bit.ly/VMoHOD.  Keep me posted with the results of your testing.  Thanks!
    AnthonyTa_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • HT4623 My ipod touch will not sync with my computer and computer says that it is due to an impropper response from ipod.

    my ipod touch will not sync with my computer and the computer says that it is due to an impropper response from ipod , what do I do?

    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.

  • My iPhone will not pair with Yada Bluetooth speakerphone

    My iPhone 5 (iOS 8.1.1) will not pair with a Yada Bluetooth car speakerphone. (Android phone has no problem.) Is there a fix?
    Thanks

    Hello grassyknap,
    For most issues with pairing your iPhone with a Bluetooth device like your car, then take a look at the article below to sort you out. Make sure to reset network settings to clear it out from your frequent pairings to reestablish the connection. 
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/en-us/TS4562
    Regards,
    -Norm G. 

  • IPhone 4s will not pair with car bluetooth

    My new iphone 4s will not pair with the bluetooth in my 07 Volvo XC70. The blue tooth is after market, looks similar to internet photos of Motorolla T605. Blue tooth says to put in scan mode and then enter code when prompted. Pairing fails and then the screen for the code shows up on the phone.
    I had a iPhone 3s paired with this Bluetooth, and once when I did a reset of that phone had this issue, put through many attempts it eventually paired. Despite many attempts, I cannot get the 4S running IOS 5 to pair.
    The phone does pair with a motorolla bluetooth ear piece.

    I've been having this issue since I got an iPhone 4S last week.  (Upgraded from iPhone 4 on iOS 5.0.1)
    I would think that this is a software issue but I went ahead and visited an AT&T store to see about a replacement phone.  I was directed to go to an Apple store which I then did.  I explained this bluetooth issue I was having as well as the other issue with no audio on outbound calls (described in a different thread) and they gave me a new phone.
    Well, I've tested it several times now with the nav/handsfree systems in two different cars as well as with my headset.  All is good so far!  No drop of bluetooth connection, can switch at will between audio sources and no lack of audio on outbound calls any more.  (And these problems were happening frequently before, even after a complete restore.)

Maybe you are looking for

  • Build XML for Custom Nested Accordian (like Tree View Structure) for SharePoint List Data

    Expected output in Xml: <?xml version="1.0" encoding="utf-8" ?> - <TopRoot> - <Root id="1" Name="Department"> - <Type id="2" Name="IT"> - <SubType id="3" Name="Technology">   <SubSubType id="4" Name="Sharepoint" />   <SubSubType id="5" Name="ASP.NET"

  • Mismatch query not working. Not sure what I did wrong.

    In my query, I have created two CTE's. One pulls in the records of all people who are assigned to an audience. The other pulls in all people who are assigned to the same audience AND completed a certain course. What I wanted to do from there, was to

  • Subcontractor and supplier material

    i want to know where is the particular material allocate to which vendor for example there are two more vendors ,we provide contract to any of one  vendors i want to know curently which vendor has that material ifor raw material which  supplier has t

  • Printing using direct IP address of printer

    Printing using direct IP address of printer Is there a way in Adobe Livecycle where we can directly print using printer's IP address by passing print server? If so what settings we have to do i.e. which entries to be added on TrustStore, which protoc

  • Delay in processing

    Hai        please give soluton to my problem          in my project we are using logility,xi ,r/3,bw systems actually i have to sent forecating data from logility to r/3 via xi  from there it goes to BW system.After that again this data should pass t