Trackpad won't move curser mouse does. Left and right click working fine

Hello everyone,
I have a problem. Out of nowhere my trackpad won't move the curser anymore. Connecting a USB mouse does. Left and right click are still working fine. Any ideas of how to fix it?
Thanks
Dave

Hey there DaveDaMac,
It sounds like your built in track pad is not responding at all, but your USB mouse works without issue. I recommend the troubleshooting in this article for you named:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
http://support.apple.com/kb/TS1248
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

Touchpad keeps freezing (left and right click work fine)

Hi, my touchpad keeps freezing randomly. I can still use the left and right click buttons and it eventually unfreezes after 10-40 seconds. Please tell me how to fix this. Thank you.
Here's my computer information:
HP Pavilion
Product number G4W72PA#AKL
Running on Windows 7 (not sure if 32- or 64-bit)

Hello @ericajq ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion Notebook and issues with the Touchpad on Windows 7 freezing. Here is a link to Touchpad troubleshooting.
The section marked TouchPad properties page on the left side has a restore defaults. Select that button if available.
I hope this helps with the TouchPad,
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Touchpad left and right clicks don't work on Yoga 2 pro

Hi,
I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

Hello,
I've had a Yoga2 Pro now for six months or so. Just recently the left click stopped working correctly. What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click. Sometimes it works, sometimes it keeps stopping.
Now, the right click is malfunctioning as well. I press right click on something like an image, and nothing happens. I have to right click on something 2-10 times now for it to register that I'm right clicking.
Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which can)?
I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix. I'm hoping its not a hardware malfunction. I am running Win 8.1.
Thank you.

My trackpad won't move the mouse, only the clicks work, happen after updating. Help!, My trackpad won't move the mouse, only the clicks work, happen after updating. Help!

I just update using the app store on my mid 2012 MacBook Pro, and my trackpad wouldn't work, it won't move the mouse but it would still click, I'm using a extrenal mouse at the moment. It really hard carrying your mouse and computer around. Can someone please help me? I also try restting Pram and Scm but it did nothing.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

2011 17" MBP TrackPad Left and Right Click Intermittent in Win7/64

A few weeks ago I installed Win7 Pro 64 via Bootcamp in a new 2011 MBP 17 (2.3gig). Since day one the trackpad left and right click buttons have been intermittent in Windows only.
For example, while surfing the web some clicks work, others don't, often have to repeat clicks to get it to work, then next time it will work the first time. This is not just a Safari problem, it happens in every program including the Finder.
I think it is a driver issue and Apple needs to get on the ball and fix the problem and send out an update (yes I have the latest version).
I saw where a guy had written drivers to address the problems with the low quality Apple drivers. His is called TrackPad+++ but it is bloated and I'd rather not install it nor should have to.
Anyone else having this problem or found a good solution? BTW an external USB mouse works great.

After a little bit of looking around i found my answer! Use the BootCamp Control Panel that you can call up by clicking on the boot camp icon in the notifications panel. There one can enable tap to click, dragging, and right click.

Left and right click at the same time?

Is there a way to get the magic mouse to do left and right click at the same time? Useful for well.. gaming.

Check out the free Magicprefs software. You can then assign different functions to different clicks. swipes, taps, etc. There is an option for a two finger click and one of those options is "hold both right & left". It's free so you have noting to lose.
HTH

Left click acting like both left and right click

Left Click button is acting like both left and right click button HP 2000 Notebook PC

Could you try to use another mouse? If the other mouse works perfect, then your mouse pad must be damaged and you should look to get it fixed or just use a mouse instead. If not, then the settings on how the clicks act must have been altered.
Try to find a mouse to try first before looking at the settings for your mouse pad. You could maybe borrow one if anyone else has a computer with a mouse in your home.
While you do that, I'll work on searching if this is common and if their is a solution if it's the software.
I'm a programmer and a computer expert in training.
Please feel free to click the "Kudos!" on the left if I helped. Note* I do not work for HP

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

My HP pavilion G6 notebook PC the touch pad works however not left and right click pads

Hi all, new here so go easy with me ) I have a new HP pavilion G6 notebook PC, the touch pad works however not the left and right click buttons? Checked in control panel and can not find a way of enabling them. Also unable to scroll down a file in the window without using the actual scroll down bar on the right of the screen...any solutions please?

Hi Sy,
First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53851.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, restart the notebook.
When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Now follow the directions under the sub-heading 'Adjust horizontal and vertical scrolling' in the document on the link below to configure the scroll options as you require.
Configuring The ClickPad.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My left and right click on the trackpad don't work.

From reading a number of the posts here, it would seem that trackpads not working is an issue that Apple may need to look into. I have personally resorted to using a mouse and the trackpad as a touchpad. For all the finger gestures, my trackpad works fine, but it doesn't respond at all to the left or right click options. It clicks audibly, but neither responds. There were some posts about playing around with a PRAM (whatever that may be), but surely there must be a more definitive solution. Does anyone know if this is an issue that is being addressed by Apple or does anyone know of a permanent solution? I don't mind continue to use the external mouse, but it seems a shame that the trackpad malfunctions and there is no apparent solution; that's unlike an Apple product. Your input would be appreciated.

This fixed it :
"Solution:
With the laptop open, turn it on to it's side. Repeatedly click the trackpad with a firm, but not excessive amount of force. Put the laptop on the other side and repeat.
I can't explain why this works. Perhaps some amount of debris or dust has built up under there ? I went from not being able to click-drag without an excessive amount of pressure, back to a normal amount of pressure after doing this."

Area Surrounding Mouse Pad-Left and Right-Suddenly Sensitive To Touch

I have a 13" White MacBook that is suddenly acting really odd. The area (left and right) surrounding the mouse pad has become almost untouchable. If I touch those areas sudden and varying input occurs.
I write code on occasion and noticed a few days ago that errors would pop up with bizarre text causing the problem. Now, even the slightest touch will cause problems...maybe a copy and or paste, a simple highlight of text, the enter key is pressed, etc....
My Mac rarely leaves the desk, so no damage has occurred to the hardware.
Another issue I noticed that started a few weeks ago is that the cursor will go away for a brief second or two.
Any ideas???
Thanks...RedRacer123
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MB41.00C1.B00
SMC Version (system): 1.31f1
Serial Number (system): W8836AGxxxx
Hardware UUID: 9ABA4ECA-EC9D-5640-8D8F-ED2FA4309934
Sudden Motion Sensor:
State: Enabled

Save your work, connect the power adapter and remove the battery. Does the behavior persist without the battery?
~Lyssa

Any methods or interfaces for Mouse Left and Right click actions?

Could anyone tell me the methods that I can use for setting up Mouse Left click and Mouse Right click actions? I checked the on-line API and could not find those specifications. Maybe I misses something and did not find them. If you just happen to know it, could you reply this message or you can tell me where I can search to find it. Thanks for your help. Bob

I believe you just set up to receive all mouse click events regardless of which mouse button the user clicked. When you get the MouseEvent object, call its getModifiers method to get an indication of which mouse button was pressed. Check the javadocs for MouseEvent, paying particular attention to "the button mask in the modifer field"

How can I cut and past on imac without a left and right click on mouse?

Trouble cut and pasting on an imac since mouse has no right and left clicks...how can I highlight something and cut and paste somewhere else?

Holding the Mouse button down and dragging across text should highlight it, and Command-C Command-V should allow you to copy/paste.

T7700 only left and right speakers working

I bought my speakers awhile ago, and I had no problems. Though I couldn't get my rear and side speakers to work, I found out by changing the speaker settings in the control panel. Now, my rear and side speakers don't work unless I reinstall the drivers. I checked the speakers setting in the Creative Volume Control and it says its 7.1, though my side and rear still dont work, it also says its 7.1 in the control panel. I am tired of reinstalling my drivers just to get my speakers to work properly. I have checked all wiring and it seems okay. When I run the speaker test, I hear sounds from all speakers. Diagnostics are all good but I can't seem to find the problem. I've also tried reinstalling my sound card but it seems to do nothing. Also when I reinstall my drivers and it shows the "restart your computer" prompt and I click "restart computer" it will freeze and I will have to revert to shutting it down improperly, sometimes it will freeze and sometimes it won't, this maybe the problem. PLEASE I REALLY NEED HELP. Thanks in advance.
-also I have a Sound Blaster Audigy 2 ZS Gamer and Windows XP

Immortaltechniq,
I think you may have a conflict with your card and the system. I would suggest that you cleansweep the card out, and then move the card to a different PCI slot. Once there reinstall the card making sure that your Antivirus is disabled during the process. Here are instructions on how to cleansweep:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

I used to be able to scroll with the button on my laptop (between left and right-click buttons) and now I can't

there's a square button on my laptop between the right and left-click buttons which is meant to use to scroll down pages with. it worked before I upgraded, and now id doesn't. how can I change that? my laptop is an Acer from e-machines
thanks!

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

Trackpad won't move curser mouse does. Left and right click working fine

Similar Messages

Maybe you are looking for