Trackpad won't scroll after migrating from PowerBook PPC 10.58 Q+A

I am posting this and the solution to help others because I was unable to find anyone having the same issue.
I migrated an account from a Powerbook with 10.5.8 to 2010 MacBook pro with current Mountan Lion 10.8.2 installed.
The trackpad worked in every way except to scroll down or up with two fingers. turned the preferences on and off to no avail. scrolling with a mouse's wheel worked fine.
I created a new account on the MBPro and the trackpad worked.
I re-imported the account and had the same problem.
Thus, this was an account-specific issue.
after swapping preference files in and out, I found the culprit.
I had to enable hidden files to be shown.
I replaced the corrupt file with the one from the test account and everything was better.
filename:
.GlobalPreferences.E57DD664-D305-5A98-B838-3E1268DF6FF2.plist
file location:
/Users/(AccountName)/Library/Preferences/ByHost
Odd problem. I hope this helps someone else.

Glenn, this has been bothering me for several months now. Thank you very much for posting.
I just deleted the file then rebooted, and it worked.
Kevin

Similar Messages

Trackpad won't scroll in migrated account

I'm having migration issues with a new MacBook Pro and an account migrated from a Powerbook G4 running OS 10.5.8. On the new computer, when I am in an account created for the new Macbook, the trackpad works as expected. When I am in the migrated account, the trackpad has only minimal functionality. Clicks work. Scrolling and gestures do not. As this is my main data account (and the other is just for trouble-shooting), it's a bummer not to have the full trackpad.
Some history. The old computer had SideTrack 1.6 installed to operate its trackpad with scrolling. It won't work on Lion, and I have uninstalled this and restarted after migration. Unfortunately, that didn't help. The only other non-apple System Preferences panes are Flip4Mac and Growl.
Any suggestions of what I might do to restore full trackpad functionality?

I browsed the SideTrack site but it offered little in terms of support. Sounds like there are still some remnants of SideTrack left that are interfering with the preferences. At least for scrolling, try this: Go to System Preferences > Universal Access > Mouse & Trackpad tab > trackpad options.. button > Check scrolling.
Regards,
Captfred

Internet connection problem after migrating from Powerbook G4

After starting up my friend's new Macbook 2ghz for the first time, I migrated everything from his old Powerbook G4. However on starting the machine for the first time, although the Internet Status suggested his Airport connection to his Netgear router was working and that he was connected to the Internet, this was not the case, as the registration info could not be sent to Apple, the time/date wouldn't update and he could not browse or check e-mail.
Initially it occurred to me that perhaps the Netgear router didn't like the fact that the same Network settings (IP address) had been given to the Macbook when it had a different MAC address. However this didn't seem to be the case as I was able to add the new Macbook to the list of trusted devices and turn on Access Control, but this still didn't work
Eventually when I turned off the security settings, so that the password was set to "none", instead of WPA/PSK and then did likewise for the named network on the computer, I was able to get online at long last
However I don't want to leave the wi-fi system without any password protection for obvious reasons. His Netgear router is a newer model than mine and it had a choice of WPA2, and when I tried this and did likewise on the Macbook it was still working. Yet the matter gets more complicated as he also has a PC on the same wi-fi network and this would not accept the WPA2 setting on the router and I could not get online with the PC
I dont understand why WPA2 worked on the Macbook but WPA didn't and I need to find a password setting that works for both computers. I don't really understand the WEP option as the encryption choices are 64 and 128 but there's no 64 on the Macbook. More importantly I don't have the foggiest how to get a desired password, as when you put in a "passphrase' and click "generate" the router produces four different keys which are all decidedly impossible to remember and so totally impractical if you need to use these to log on.
I appreciate that this is a bit of a confusing query but if anyone can offer any assistance., I would be extremely grateful, as after all the time it took me today to suss out actually getting his new Macbook online, I am loathe to mess around without really knowing what I am doing and so I need to find a security option that can be used by the Macbook, his older Powerbook and a PC running Windows XP
With my utmost thanks in advance for any help you can offer, but please bear in mind I'm a bit of a techno-nincompoop so please be gentle with me
Many thanks
Bernard

Thanks a million for bothering to reply, it's very much appreciated. I rarely seem to get much success when I try searching in Apple support but I guess that must be because I choose the wrong search terms.
Since all the equipment is relatively new and quite high spec, I believe I should be able to use the WPA format and it's a matter of finding an arrangement that works with both the PC and the Macs. What I don't understand is why the Macbook appeared to be connected to the internet with a WPA password, but wouldn't in fact get online, until I either changed to no password, or to WPA2?
However I'm extremely grateful to you because those docs all proved well worth reading, if only so I might understand some of the technical gobbledigook (the avoidance of which was one of the principal reasons I became a Mac evangelist in the first place), as the whole password encryption thing has always been a complete mystery to me, hence for my own wi-fi set-up, I long ago settled for hiding the network and turning on the trusted devices access control, just to avoid having to deal with any of this technobabble. However my mate wants people to be able to log on to his network if they turn up with a laptop, but at the same time prevent totally open access to his internet connection to all and sundry, so this is not an option.
What really bugs me is that the interface for the Netgear modem/router (and any other router I've had experience with) never seems to work properly on an Apple, no matter what browser I use and having sold his family on the whole Apple experience, it's usually a bit embarrassing to have to squeeze my mercifully narrow backside into a baby's chair in order to use their PC to resolve any router issues (as the PC is only there for the kids to play games). But invariably it's only by using the browser interface on the PC that all the various options seem to work
Again much appreciate you going to the bother and the fact that there is relevant stuff in the support library leads me to believe I should attempt to find some more details which might resolve the WPA difficulties I've experienced with the new Macbook.
Meanwhile, although I am not so keen on the new glossy screen on the Macbook (I'm amazed you can't have the option of a matt one unless you get a bigger Macbook Pro), you've no idea how envious I am having to set up his new toy when I can't afford one myself. Mind you, the last time I told this bloke that if he wanted decent support for his iPod, he'd have to buy me one, he returned from the US with a 60gb model to match his (sadly pre-video iPods), so perhaps I should make matters more complicated by installing Boot Camp and Windows, so that I have to tell him that I can't offer support over the phone without one of my own
Kind Regards
Bernard
Macbook 13" 2ghz" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

Mail Clean Install Help: Mail Won't Work After Migrating to 10.6 from 10.4

I cannot get Mail to open after migrating from 10.4 into 10.6. Mail tries to import my 10.4 folders and messages and then quits unexpectedly. I want to do a clean Mail install to see if I can resolve the problem, but don't know how to do so.
All advice is greatly appreciated.
-Brian

Mail, the application, should not cannot contain any message data assets. The Mail application must sit in the Applications folder, and be usable to every User Account on the Mac, and not just yours (understand you might be the only user, but making a point).
Mail, the folder of data for just your emails, should properly be at Home/Library/Mail.
Let me ask again -- in the Applications folder is there an Icon for Mail, and is it the Icon of a postage stamp, or is it perhaps the Icon of a folder?
However, let me note, that now that I have booted back into Snow Leopard, and used Get Info on the Mail Icon in the Applications folder, it is reported to be 77.5 MB! Looking at it from other boot volume (Leopard) does not see all the elements of its "package" apparently. My apologies.
Now it is time for a different test -- Create a New User Account, and as that New User launch Mail and try setting up one new email account - if POP select to leave messages on the server. See the following if not familiar with adding a new user account:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail?
Ernie

Migration from powerbook 10.4.11 to imac 10.6.8

Migrating from Powerbook G4 10.4.11 (cannot upgrade beyond this release). Migrating to a new iMac 10.6.8. Problem: both computers are on the same wireless network. Start Migration Assistant on iMac then on Powerbook. Select "From another Mac" on iMac and "To another Mac" on Powerbook. Powerbook sees iMac, offers passcode entry field. Enter Passcode from iMac into Powerbook Passcode field. iMac displays "processing information ...". Powerbook does same. After 10seconds Powerbook displays the Passcode entry field again. Enter the same Passcode from the iMac into the Powerbook Passcode entry field. Powerbook displays "searching for other computers ...". iMac displays "processing information ...". After a few minutes, iMac displays dropdown box stating "connection to other Mac failed" (or similar wording) while Powerbook continues "searching for other computers ..." and iMac Migration Assistant main dialog box continues "processing information ...".
Any help solving this problem will be much appreciated.
Steve

Steve your first mistake is attempting to do this wirelessly. If you can get it to start expect the migration to take a week or more. The easiest way is to connect the two together via Firewire with a cable like this which you can find at your local computer store, Radio Shack or of course Amazon. This assumes the Powerbook has Firewire, if it doesn't then create a bootable clone on an external HD. You will use either SuperDuper or Carbon Copy Cloner to create the bootable clone. Then instead of using Migration Assistant use Setup Assistant which you ignored when you turned on the new iMac for the first time, this mean you will need to start over. Please read Setup Assistant tips for detailed instructions beginning at "Second Chance..."
Finally when you are migrating I would strongly recommend not migrating your Applications because you are moving from a PPC based machine to Intel. You may have apps that don't run on Intel or simply need to be updated to do so. This is your opportunity to update Apps and get current.
Migration Assistant and Setup Assistant are cousins, similar but different. First is SA is more reliable and second it does not create a second user account.

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion

Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Cant find my iTunes library after migration from old PC to new Mac

Can't find my iTunes library after migration from old PC to new Mac?

Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer.

Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
Thanks,
Mark

Hi Mark,
Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

STP playback is erratic after migrating from 10.4.11 to 10.5.8

After migrating from 10.4.11 to 10.5.8
SoundTrack Pro playback is erratic,
i.e; audio stops and starts with a few small click noises.
Your suggestions will be mostly appreciated.

Thanks for your reply.
STP version 2.0.2
Audio is straight out no interface and works fine besides erratic stop-start playback.

ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2

Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You

Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.

Trackpad won't scroll after migrating from PowerBook PPC 10.58 Q+A

Similar Messages

Maybe you are looking for