Trackpad won't work properly in Lion

Just installed Lion, but having some issues with the trackpad on my 17" MBP (About 2 years old).
For example:
*On Dock - hover effects such as magnification and title of the icon doesn't work
*Resizing windows by pulling lower left corner doesn't work
*On all standard Lion dropdown menus (for example Apple menu in the top left) has no hover effects and I have to click twice to make my selection.
*Mouse pointer doesnt change when switching between apps. As I'm writing this I still get the "text editor" pointer while moving away from the Safari window.
I have a Wacom board installed and it works just fine so the problem seems to be isolated to the trackpad. Any tips?

Sounds like third party software conflict.
Does this behavior persist in Safe Mode?
Starting up in Safe Mode
charlie

Similar Messages

Magic Trackpad won't work properly

In the bluetooth preferences my magic trackpad connects, but in the trackpad preferences it doesn't show up. What's going on?!
I can use basic mouselike functions with my trackpad, but since it won't show up in the trackpad preferences I can't use it do anything "magical". That renders it usesless. (I can use an old-fashioned mouse to do that)
I'm usig a new iMac (quad core) with system 10.6.8. In the trackpad preference it says "no trackpad found". If I restart the trackpad it can be found, but when I click "continue" it disconnects. Then I go back to the bluetooth preferences to see that it's still connected! Like I said, I can use the most basic functions, but only those basic functions. Very frustrating...
The batteries are good and I place the trackpad right under the computer monitor to avoid interferrence, etc. Is it possible there's a software glitch somewhere?!

I'm guessing that, if you don't know what USB Overdrive is, you probably have not installed it. It is not something that comes with your computer. Here is is a link for USB Overdrive:
http://www.usboverdrive.com/USBOverdrive/News.html
If you have USB Overdrive installed on your computer you will see it as and icon at the bottom of the "System Preferences" window. If you see it there, you can click on it to open its control window and delete it from there. But like I said, I'm thinking that's probably not your problem. Still, go take a look at the bottom of your system preferences just to make sure.
I'm wondering, though, if you installed any other software for a mouse, or other type of controller, maybe it would cause similar problems too. Maybe you should check for other things you may have installed (?).

My trackpad is not working properly and my battery won't charge

Hi guys, yesterday my macbook probably suffered electrical shock and now my trackpad is not working properly, it's a bit slow and my battery won't charge. and also ethernet port is not working but wi-fi is , can you help me please ?

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the computer to the Apple store to have the computer and battery checked out.
Best.

Magic Trackpad won't work with Magic Mouse on brand new 2011 27" i5 iMac

I have a brand new 2011 27" i5 iMac which I bought with Snow Leopard pre-loaded. Naturally, I included the new Magic Trackpad in my purchase, and though there were some problems with the device in SL - such as it going haywire without explanation - it generally worked, although battery levels were erratic (one day 80%, then an hour later 42%, then 80% again).
When I installed Lion I did a clean install after backing up to Time Machine - and a Super Dupered external drive. I had some difficulties trying to install Lion from an external flash drive so I deleted again and reinstalled SL, then reinstalled over the SL install I did (with no other software except Mac OS X 10.6.8 and other system updates to facilitate install). Rather than copying apps from my old SL drive, I downloaded fresh copies and reinstalled one by one. I don't use a lot of apps apart from Microsoft Office, browsers and iLife and have not installed any additional scripts, extensions or add-ons (like USB Overdrive). It's a pretty clean install.
Since then, although I'm generally happy with Lion, the Magic Trackpad won't work! It does work for a little while with basic gestures - mainly moving the cursor and scrolling - then it gives up the ghost and loses connectivity. I have done the following:
Disconnected and reconnected the MTP after turning it on and off. MTP works for about two minutes, goes crazy then no response.
Shut the computer down, pulled out the plug, waited two minutes, then started up again. MTP works for about two minutes, goes crazy then no response.
Run Onyx, shut down computer, then pulled out plug (see above).
Checked options in Universal Access, shut off "Ignore other devices when trackpad in use" (or whatever the option is). MTP works for about two minutes, goes crazy then no response.
Turned off the Magic Mouse. MTP works for about two minutes, goes crazy then no response.
But none of this seems to work! I know the MTP is connected because I can see it in the BT menu in the menu bar and also in System Preferences. I have noticed since upgrading that my permissions - which when I bought the computer were totally clean - now run lines and lines about "Library/Core Services" so I am unsure whether this is related. I also notice a lot of people are in the same boat as me, which makes me wonder if it's either a hardware issue or a release issue - after a week or so of totally silent running, my 2TB Hitachi HDD started up with the grumbly tum. I'd really appreciate any tips from anyone out there!

Hi, marksaner
You could try installing the latest version of the Synaptics driver. Synaptics is the company that makes the UltraNav driver and drivers for many other computer brands. This driver should have the same functionality as the UltraNav driver, so there's no worry there. You can find the driver here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all.

Macbook Air Late 2010 model, 10.6.7, 2.13 4g ram. Trackpad is not working properly and in sometimes not at all. Need suggestions to resolve this issue? I have applied all Mac updates and still having problems with the trackpad.

The machine has a 1 year warranty, book an appointment with your local Apple Store or AASP to have it looked at.
You can try doing a SMC reset however I don't think that is the solution.
SMC RESET
• Shut down the computer.
• Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
• On the built-in keyboard, press the (left side) Shift-Control-• Option keys and the power button at the same time.
• Release all the keys and the power button at the same time.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

My trackpad is not working properly since installing the upgrade. What should I do?

My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

My trackpad is not working properly already. Is it eligible for replacement?

My trackpad is not working properly sometimes and it takes too long for my macbook to open

Whether your MacBook is legible for a replacement depends on the products warranty...
When did you purchase the product? Was it a new purchase or a second-hand purchase?

My Magic Trackpad won't work on my Mac Mini?

My Magic Trackpad won't work on my Mac Mini? The cursor moves a little and then will not respond at all. Gestures do not work

Yes, it's one of the things that can interfere. Here are some others including airport. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
http://support.apple.com/kb/HT1365
Captfred

My trackpad is not working properly. It doesn't respond very well and only a very small area of it actually works. What can I do?

Hi! Can anyone help?
This is driving me insane.
I have a MacBook, which still works pretty well apart from the fact that over the last few weeks the trackpad started not responding very well.
I have to hit very hard and it only works on the bottom right corner.
It responds to me moving my fingers over it, the problem only happens when clicking on something.
I would really appreciate any tips from any of you clever people out there.
Thanks

Does your MacBook have a removable battery?
If so, try removing the battery and running just on the power adapter. Don't do anything too important as the computer will power off if the power adapter comes loose! Just do this for a few minutes to see if your trackpad works any better.
If your battery isn't removable, run your hand over the bottom of the computer - or run a level over it if you have one - to see if it's flat.
In either case, it's possible your battery has swollen and is applying pressure on the connection for the trackpad, which in turn means the trackpad won't work as expected.
~Lyssa

My Pearl keeps restarting and the trackpad won't work!

My new Pearl 9100 keeps freezing and then restarting on itself. It's super annoying because this happens about every hour. When it restarts the entire trackpad won't work, even the button. The only way I've been able to get it to work again is to restart it until it does! It usually takes about 7 restarts until the entire trackpad will work, then it restarts again.
Is there any suggests on what I should do? And I'm still on warrenty but Bell said they couldnt do anything about it

Have you already tried the following steps to reload your device software ?
1. Verify that the Desktop Manager and BlackBerry Device Software are installed on the computer.
2. Remove the battery from the BlackBerry. Do not re-insert.
3. Connect the BlackBerry to the computer.
4. On the BlackBerry Desktop Manager main screen, click Application Loader.
5. Click Start.
6. Click Options to select applications to be installed.
7. Click Next.
8. Click Next.
9. Click Finish.
10. When the application load starts, re-insert the battery into the BlackBerry.

Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

Read A fix via Virtual XP
http://forums.adobe.com/thread/702693?tstart=0

Iphoto9 won't work properly in Snow Leopard

On my Macbook (2008) iphoto9 won't work properly in Snow Leopard. What do I do? Upgrade to iphoto 11 or is there another way?
I was happy with iphoto9.

Had a look around the message boards and found this link, has solved the problem.
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

IPOD won't work properly if drive C: is available on your computer

The Windows XP driver for the Apple IPOD USB Device has a bug that makes your system very slow or even hang when you try to connect or eject your IPOD if Drive "C:" is available on your machine. Another symptom is that when you connect your ipod, the computer doesn't automatically launch the ITunes app and it is very slow to open manually.
A typical problem is that if your system has had a hard drive replaced and/or the drive "C" is not assigned for some reason, then the IPOD USB Driver will attach itself as drive "C:" and then it won't work properly seemingly because of conflicts with the Windows OS. Other USB devices never grab drive "C:" but this Apple-supplied device driver appears to think it is OK to use drive C: but then it doesn't work properly.
The fix is to make sure some real (physical) drive is always connected to or mapped to drive "C:" so that the IPOD USB driver attaches to a drive from "D:" and up.
Also try reading: http://docs.info.apple.com/article.html?artnum=93499 for more info.

yeah, the ipod normally gets assigned the f, g, or h drive letters. i don't really know though if windows is responsible for assigning the drive letters to usb devices or the ipod driver. to my understanding the ipodservice.exe only makes sure that itunes can comunicate to the ipod through the drive letter that windows assigns to the ipod. windows is the os and therefore responsible for managinig its drive letters.

Since updating to ios 6 my ebooks won't work properly on my iPad. Skips from first page of a chapter directly to first page of next chapter. I'm very unimpressed

Since updating to ios 6 yesterday, my ebooks won't work properly. They jump from first page of one chapter onto first page of next chapter. Obviously missing all the pages in between. Anyone else having this problem? Help please....

I have a similar problem with Microsoft Visual C# 2010 Step by Step. This ebook worked fine until I upgraded to ios 6.

My iMessage won't work properly on my iPhone4

My iPhone 4s iMessage won't work properly and I don't know why.

I am also getting the message to connect to iTunes to use notifications even though I have notifications turned off for the app???

Trackpad won't work properly in Lion

Similar Messages

Maybe you are looking for