Trackpad wont select items on internet browser

Occasionally (when its necessary) my trackpad won't select items on the browser and I have to select them with the enter key. Does this happen to anyone else? Also how do I change it? Thank you for your time and any help

What is your device model? That would help to know.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

The iPod "TAMI DUGARD's iPod" cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). this was from my ipod mini trying to sync and it wont let me sync so... could u help me i really needit

I really need help because my ipod mini isnt working correctly my mom just gave it to me and The iPod “TAMI DUGARD’s iPod” cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). it says this. Over and over when i try to sync it too my itunes what does this mean and its a 4gb

It means you try to sync an amount of content to your iPod Mini that exceeds for 4 GB, or the amount of space that is available on the iPod. See this article for more details.
How to sync music to your iPod when your library is bigger than your iPod storage space
B-rock

Internet browser and form data

Hi there
I have a problem with forms displayed and submitted by the internet browser.
We have a input field in which we need to write "Québec" and the "é" shows as "?".
We also have a dropdown that displays the accentuated items correctly but the accents get all mixed up when submitting our form.
As a piece of infomation in Internet Explorer everything works great, the problems is on our 8703 blackberrys
Anyone has a clue?
Thanks in advance

frodo202 wrote:
Hi there
I have a problem with forms displayed and submitted by the internet browser.
We have a input field in which we need to write "Québec" and the "é" shows as "?".
We also have a dropdown that displays the accentuated items correctly but the accents get all mixed up when submitting our form.
As a piece of infomation in Internet Explorer everything works great, the problems is on our 8703 blackberrys
Anyone has a clue?
Thanks in advance
Hello Frodo.
This may be caused by the browser configuration. Open your browser, press Menu key, and select Options | Browser Configuration. Try changing the browser emulation.
===========================================================
If I've helped, please click the Kudos button.
If your issue has been resolved, please mark it as solved.
Joe
===========================================================

Portlet Item Attr: "Link That Displays Item in New Browser Window"

I have been searching the forums for a similar experience, but haven't found anything quite like this:
I have a couple of portlets. One is a Discoverer Portlet, the other is something more basic: The "Developer News" portlet from the 9iAS Community portlet provider.
After defining the portlets and looking at them, I edit the page and click the Edit button (little pencil) to edit the attributes.
There are radio buttons for Display Options.
One option is: "Link that Displays Item in New Browser Window."
When I select this, OK, and then go back to the page, **the portlet doesn't show at all any more! There is no link, no nothing. Note that I have defined a Display Name, which should be the text for the link.
It would seem that this feature flat out doesn't work.
This technique for a popup works fine for an "Item" defined in an item region.
Anyone?

Yes -- I did do that after reading an article on metalink about such issues.
This actually changes the problem.
When I add the "Display name and image link" attribute to the region, I now do get a link.
However, clicking it brings up an undefined Discoverer portlet.
It works great for non-Disco portlets. For instance, I was able to pop up the "Developer News" portlet from the Oracle 9iAS Community portlet provider.
I think the problem is that the link that Disco produces does not provide enough information to bring up the particular portlet. For instance, the URL does not have the workbook name, the worksheet name, the parameter values, etc.
If anyone uses Disco w/ the portal, I would be curious to hear if anyone can reproduce this apparent bug / limitation.

My 6th generation Ipod Classic will not eject, works fine otherwise and properly goes thru sync cycle. A message shows files are in use and device can't be ejected. If I close my internet browser it will eject properly every time.

I have a new HP Pavilion running Windows 7 with lots of memory and a terabyte of storage, using iTunes 11 with a 6th generation Ipod Classic. Have used my current iPod for years with no problem until today; when I try to eject the device iTunes stops responding, there is a delay of about 10-15 seconds until a message box pops up: "the ipod cannot be ejected as there are files in use." It also won't eject from the windows taskbar, same type of message appears. iTunes remains unresponsive until I click "ok" on the message box. I've reset the ipod twice and disabled the "enable disk use" button for the ipod -- with no change in symptom.
I am not certain as to the fix but am 100% sure that the problem does not occur if I close my open browser; it occurs only when I have an Internet browser open. I experimented with Google Chrome that I normally use, and also with Internet Explorer -- when either browser is being used the ipod cannot be ejected.
I've used iTunes 11 for about 3-4 weeks and this problem had not occurred until today.

I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

The 'selected items' color randomly changes and I can't figure out why.

Hi everybody, I recently upgraded to Firefox 13, which appears to be the most stable browser version so far and I really like it. I have loved Firefox very much, having used it since somewhere between versions 2 and 3.
After upgrading to version 13 I noticed something that annoys me quite a bit. This may have been present before but I can't remember and I did not notice until now.
On my computer (Windows 7 x64 Ultimate) I have set the color of the 'selected items' (specifically text) to be lime green text on a slightly off black background. I chose this color scheme because it blends very well with Firefox itself (I have the NASA night launch theme), Windows Explorer, and many web pages that I have changed to a dark theme (using the Stylish browser extension). This color scheme has excellent contrast in areas with black text on a light background, as well as light text on a dark background. It has served me well.
After upgrading to Firefox 13 I have noticed that if the web page is dark with light text, the 'selected items' color changes to lime green text on a light grey background. (Less frequently, it changes instead to off-black text on a lime green background). I have not been able to isolate the threshold where this change occurs (meaning how dark the website background needs to be /how light the text needs to be for this to happen) nor have I found a solution.
This problem sometimes extends even to sites that have dark text on a light background: when tabs are switched, with no input fields clicked and the address bar is not clicked. This very page (Firefox support) is apparently vulnerable as well.
This problem only happens on rendered web pages. Firefox's menus, buttons and toolbars, as well as all other programs and Windows itself, are unaffected.
I want the 'selected items' to remain as I have set it, and not deviate regardless of the apparent contrast or color scheme of the web page being displayed.
[Edit #1]: Interestingly, as I was copying the information from about:support I noticed that it is affected as well.
Any suggestions? Thanks so much, and I am sorry for the long-winded description. tl;dr look at the pictures.
[http://i.imgur.com/vmLZ6.png selected items]
[http://i.imgur.com/d8xsa.png example1]
[http://i.imgur.com/2OE9J.png example2]
[http://i.imgur.com/1lhvb.png example3]
[http://i.imgur.com/UWOOp.png example4]

It is always best to avoid making changes to the selected text colors.<br />
Firefox uses an algorithm to check if the contrast is sufficient and will swap text and background colors if that test fails.<br />
*http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsTextFrameThebes.cpp#3349
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1331845

Green "Back" Button Doesn't Work in Internet Browser

I am using the integrated Internet browser. If I navigate to the Google home page, do a search and select a page from the search results, pressing the green "previous" button doesn't result in the search results page being displayed. Instead the current page is re-loaded. If I keep pressing the green button, I can eventually get back to the search results (because I am jumping back quicker than the page can re-load).Is there another browser app I can try, or is there any setting i can change?The TV is a KDL32W706B.

Hi Eugbug,
You can't install other web browser. Please make sure to install the latest software then try to re-launch the browser.
If the issue is still presist. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
If my post answers your question, please click the button below "Accept as Solution"

Beating a dead horse: Access Time Capsule files w/ an internet browser $

I know I'm beating a dead horse here, but I have spent 2 days and countless hours looking up how to access my TC using an internet browser. I've read about port fwding and dynamic vs. static IPs. I cannot figure this out. If someone could help me and actually get it to work, I would be willing to pay them a reward for there services thru paypal. I don't want to sign up for Mobile Me or pay for any monthly subscriptions. I just wanna be able to access my TC and it's files where ever I am using an internet browser. Here's what I've got:
MacBook 2GHz Intel Core 2 Duo
Mac OS 10.6.4
Verizon Fios router model MI424WR-GEN2 w/ a dynamic IP
My TC is connected by ethernet to the Verizon router which enables me to use the WiFi on the TC
Do I have to sign into my Verizon router and change setting?
I'm pretty network illiterate so a good step-by-step would be great.
Thank so much to whoever can help me.

After all the setting have been put in, I'm getting an error that won't let me update the TC. It wants me to correct 2 problems. "The DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device. What's that?
This error message is due to the fact that the TC is performing as a router (its default) and not as a bridge (as it should be) because it is downstream of your Verizon-provided router.
I apologize as I just realized when I first responded to you, that I had assumed that the TC was the only router in your network configuration. As such I had provided you with instructions based on that assumption.
As such, at least two things need to change in the instructions that I provided: 1) The Verizon-supplied router is your main Internet router and it is the one that needs to be configured for Port Mapping/Forwarding, not the TC, and 2) The TC should be reconfigured as a bridge. (ref: AirPort Utility > Select the TC > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)).
So I used the "with Time Capsule password", was that right?
Yes, that would be correct.
Here are the "adjusted" instructions:
AirPort Utility > Select the TC
o Note the value of the IP Address. This is the IP address of the TC that was assigned by the Verizon-supplied router. We are going to want to change this to a static IP address. For now, just note what IP address range it is in, i.e., 10.n.n.n or 192.168.n.n, etc.
Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)
Manual Setup > Internet > TCP/IP
o Configure IPv4 = Manually
o IP Address = select an IP address just outside of the range provided by your Verizon router. For example, if the router is supplying IP addresses in the range of 192.168.0.2 - 192.168.0.50, enter 192.168.0.51 here.
o Subnet Mask = 255.255.255.0
o Router Address = This would be the LAN-side IP address of your Verizon router. Most likely it is 192.168.0.1
o DNS Servers = you would need to get these from your ISP, or just use the OpenDNS servers
o Domain Name = you can leave this blank
Manual Setup > Disks > Files Sharing tab
o Enable file sharing (checked)
o Secure Shared Disks = With Time Capsule password
o AirPort Disks Guest Access = Not allowed
o Share disks over Ethernet WAN port (checked)
Manual Setup > AirPort > Base Station
o Enter a Base Station Password and verify it in the Verify Password box.
o When you have made all the changes, click Update.
Port Mapping instructions would be specific for your Verizon router. If you don't already, you may need to download a copy of the User Guide for this router in order to configure Port Mapping properly. The key is that the IP address for the port mapping would now be the private static IP address that you assigned to the TC. The Public & Private ports would be the same.

No Internet Browser in my Browser app

I opened the Browser, BB Menu -> Option -> Browser Configuration.I found out that I do not have Internet Browser. All i have is..
truemove wap
true GPRS wap
Hotspot Browser
**Ignore the true/truemove, as it's my carrier.
I called my carrier hotline and asked for help. The technician resend the Service Book for me, and I did an Battery Pull. I even register the Host Routing Table. Nothing helps. The technician told me that if i do not have the internet browser, i couldn't open some of the web sites. eg, http://m.facebook.com

Hi and Welcome to the Forums!
Can you clarify something please? On that Browser Configuration screen, in which field are you referring to that those selections exist? The top "Browser" selection or the "Browser Identification" section down lower in the screen?
Thanks.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I get rid of "Selected Item" window?

Just updated iTunes to version 7.5 and I notice a window below the listings of my playlists (left side of screen), thus reducing the number of playlists that I can see. I would rather that the "now playing/selected item" window not be there so I can see more of my playlists and reduce scrolling. Is it possible? Thanks.

If your CDs are marked as Compilations then you can see them by switching on the compilations feature in the browser. Go to Edit>Preferences>General and check the box "Group Compilations when browsing". When you switch the browser on Compilations will be the first item in the Artist pane, click on it and your compilations will then be listed in the Album pane. If you made these CDs yourself you'll need to mark all the tracks as part of a compilation and give them an album name (you can use the name of your playlist for example). To change the info on multiple items such as all the songs in a playlist, click on the first track you want to add information then while holding down the shift key click on the last track in the list, this will highlight all in between. Right click on the list and choose Get Info, you get a dialogue box asking if you want to update multiple items, click Yes and then the Info tab. Type in the album name and choose Yes from the drop down menu below "Compilation" which is on the bottom row of the info window then click ok and this will ensure the whole selection is identical.

Openning a Link from MS Office OneNote 2007 launches MS Internet Explorer althoug FireFox is my default Internet browser. Any idea how to cause OneNote 2007 to Launch FireFox instead?

Openning a Link from MS Office OneNote 2007 launches MS Internet Explorer althoug FireFox is my default Internet browser. Any idea how to cause OneNote 2007 to Launch FireFox instead?

Below is how it is being done. This worked perfectly for years. MS Office 2007 does complain that the file extension does not match the data format (it's a tab delimited text file but I'm pretending it's an Excel file so they'll be prompted to view it as a spreadsheet in Excel) but you just click open and it works fine. This issue with IE is new. Let me know if you have any more ideas.
<CFSETTING ENABLECFOUTPUTONLY="Yes" SHOWDEBUGOUTPUT="No">

<CFSET tabchar=chr(9)>
<CFSET newline=chr(13) & chr(10)>

<CFCONTENT TYPE="application/vnd.ms-excel">

<CFHEADER NAME="Content-Disposition" VALUE="filename=myfile.xls">

<CFQUERY NAME="getinfo" DATASOURCE="mydsn">
select fieldone, fieldtwo
from mytable
</CFQUERY>

<CFOUTPUT><CFLOOP INDEX="q" LIST="fieldone,fieldtwo">#q##tabchar#</CFLOOP>#newline#</CFOUTPUT>

<CFOUTPUT QUERY="getinfo">#getinfo.fieldone##tabchar##getinfo.fieldtwo##newline#</CFOUTPUT>

How do i build an internet browser?

i want to build an internet browser, with the following options...
- the only graphics it displays are those on the google (or other specified search engine) page
- all other pages, it returns only text, and the html used to build that page
can anyone point me in the right direction? i cant find anything specific in the help docs, so a rtfm wont help me here =P

Look at this URL : http://archive.corewebprogramming.com/ . What you wantis under chapter 14. Here is the Browser.java courtesy of Core Web Programming by Hall & Brown. I own this book, may be you might be interested in dog eared 2nd copy for a reasonable price!
Hopefully, this'll make short work of your exercise.
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.io.*;
/** Very simplistic "Web browser" using Swing. Supply a URL on
* the command line to see it initially and to set the
* destination of the "home" button.
* Taken from Core Web Programming from
* Prentice Hall and Sun Microsystems Press,
* http://www.corewebprogramming.com/.
* © 2001 Marty Hall and Larry Brown;
* may be freely used or adapted.
public class Browser extends JFrame implements HyperlinkListener,
ActionListener {
public static void main(String[] args) {
if (args.length == 0)
new Browser("http://www.corewebprogramming.com/");
else
new Browser(args[0]);
private JIconButton homeButton;
private JTextField urlField;
private JEditorPane htmlPane;
private String initialURL;
public Browser(String initialURL) {
super("Simple Swing Browser");
this.initialURL = initialURL;
addWindowListener(new ExitListener());
WindowUtilities.setNativeLookAndFeel();
JPanel topPanel = new JPanel();
topPanel.setBackground(Color.lightGray);
homeButton = new JIconButton("home.gif");
homeButton.addActionListener(this);
JLabel urlLabel = new JLabel("URL:");
urlField = new JTextField(30);
urlField.setText(initialURL);
urlField.addActionListener(this);
topPanel.add(homeButton);
topPanel.add(urlLabel);
topPanel.add(urlField);
getContentPane().add(topPanel, BorderLayout.NORTH);
try {
htmlPane = new JEditorPane(initialURL);
htmlPane.setEditable(false);
htmlPane.addHyperlinkListener(this);
JScrollPane scrollPane = new JScrollPane(htmlPane);
getContentPane().add(scrollPane, BorderLayout.CENTER);
} catch(IOException ioe) {
warnUser("Can't build HTML pane for " + initialURL
+ ": " + ioe);
Dimension screenSize = getToolkit().getScreenSize();
int width = screenSize.width * 8 / 10;
int height = screenSize.height * 8 / 10;
setBounds(width/8, height/8, width, height);
setVisible(true);
public void actionPerformed(ActionEvent event) {
String url;
if (event.getSource() == urlField) {
url = urlField.getText();
} else { // Clicked "home" button instead of entering URL.
url = initialURL;
try {
htmlPane.setPage(new URL(url));
urlField.setText(url);
} catch(IOException ioe) {
warnUser("Can't follow link to " + url + ": " + ioe);
public void hyperlinkUpdate(HyperlinkEvent event) {
if (event.getEventType() ==
HyperlinkEvent.EventType.ACTIVATED) {
try {
htmlPane.setPage(event.getURL());
urlField.setText(event.getURL().toExternalForm());
} catch(IOException ioe) {
warnUser("Can't follow link to "
+ event.getURL().toExternalForm() + ": " + ioe);
private void warnUser(String message) {
JOptionPane.showMessageDialog(this, message, "Error",
JOptionPane.ERROR_MESSAGE);
}

Disabling Java popoup messages when using internet browser

As of late, the new JRE 1.7 displays security popup messages asking the user to allow the usage java application when used via an internet browser.
Our customer base is using our application via intranet with a local server, those popup are becoming a annoyance as well as creating issue in our application. For example, with have a timeout to automatically log out of the application which now requires the user to validate it prior running, which against governmental requirement in our case.
Is there a Java setting that would allow to disable those messages? If not, is there a solution to register our application as safe to run through Java. As of now the solution is to run older version of JAVA (7u3) to allow proper usage.
Thanks

Hi,
have a look at this thread: The specified item was not found.

N8 with Anna, internet browser issue

After Anna upgrade was installed in my N8, I can´t find how to "select" text in the browser, maybe I am in some website, and I need to change what I have entered in the "search" field (like in Google).
Any help is really appreciated. Thanks

try this
open window control window...
(i am not sure control window is exact name... i use the window of my own language version.)
control window... that has many icon... like "program add/delete, sound setting, system, display,
mouse setting, internet option, keyboard setting....etc..." ^^
then you can find "Java Plug-In" icon...
click that icon. then popup window well be shown.
click browser tab....
you can see two check box option "Microsoft Internet Explorer, Netscape 6".
if Microsoft Internet Explorer checked... you must unchek... after uncheck click apply button.
close all browser and open new brower. ^^
i hope you can see what you want.

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

Trackpad wont select items on internet browser

Similar Messages

Maybe you are looking for