Trackpoint freezes on T60P
A week or so ago the Trackpoint on my T60P (2007-AE7), running XP SP 3, started freezing a minute or two after booting the machine or waking it up. Occasionally after a pause of a few minutes it will start working again on its own for a few seconds.
I can’t relate the freezing to anything I changed on the machine. And the machine doesn’t run hot – I had a problem with the fan, which stopped working a couple of weeks ago; I removed, cleaned and oiled the fan, and it now works fine again.
An external mouse I connected works fine at all times, as does the keyboard.
What may provide a clue is that I normally only activate the Trackpoint alone without the Trackpad. I notice that when both are active and the Trackpoint stops working, the Trackpad continues to work properly as do all the mouse buttons.
Sometimes when the Trackpoint has stopped working and I activate the Trackpad, the Trackpoint will start working again for a little while.
So I think there may be some kind of driver problem.
So far I have done the following to no avail, each time rebooting the machine after doing so: run ccleaner; installed and updated all four “mouse and keyboard” drivers (Synaptics UltraNav driver; TrackPoint Accessibility driver; UltraNav Utility for Windows; and UltraNav Wizard for Windows 2000/XP) for the T60P directly from the Lenovo site; rolled the Synaptics UltraNav driver back from 16.2.19.1.3 to 15.3.16.1.; uninstalled the Synaptics UltraNav driver; reinstalled the 16.2.19.1.3 Synaptics UltraNav driver; and checked that I have the latest BIOS installed.
I have also removed the palm rest and keyboard, unplugged all the connectors and plugged them back in.
FWIW, I have downloaded the drivers directly from the Lenovo site because, when using the ThinkVantage Toolbox Updater to update software and drivers, I get an error message saying ThinkVantage Toolbox Updater has encountered a problem and has to close. Running ThinkVantage System Update also generates an error message, in both instances preventing me from going further. I installed the ThinkVantage utilities after reinstalling XP on this machine, which I believe can explain why the update function doesn’t work.
So I’m stuck. Any thoughts anyone on how to get my Trackpoint unstuck? Many thanks!
Gentlemen,
Thank you both for your suggestions.
Instead of swapping kbds and HDs yet, I decided to uninstall all four Trackpoint drivers and utilities one at a time, thinking I would reinstall them later one by one. However, it sometimes takes the better part of a day for the Trackpoint to freeze up as I try to determine if one of the drivers could be the cause. Hence the delay in answering.
Meantime, after uninstalling all of them and expecting it wouldn't work any longer, to my surprise I noticed that the Trackpoint still works (although I can't scroll by pressing the pointer and central button), and has not frozen up for the last day or so. The Trackpad also works.
If the Trackpoint continues to work without freezing, I would assume the problem is not related to the keyboard or the possibility of a system board going south. I will then reinstall the drivers one at a time, see what happens and report back.
I assume I should start with the Synaptics UltraNav driver and not with the UltraNav Utility. Does that make sense?
Thanks again.
Similar Messages
-
Thinkpad W540 Trackpoint issue
Hi.
I'm having some issues with my newly bought W540 thinkpad.
Each time Windows 8.1 starts up after a longer shutdown, the UltraNav trackpoint freezes.
The problem seems to affect the trackpoint only, i have no problem with the touchpad.
Loading the UEFI BIOS setup defaults seems to help, but i need to do it after every shutdown, which is
very frustrating. The problem doesn't occur when restarting windows.
Pleas help!Hi Thinkblaze,
Thank you for the reply!
The driver version which you have mentioned is correct, & I think the firmware is not working as expected; this might be the cause for the hardware failure.
However we can check one more option and after that you can log the case for that.
Please uninstall the Synaptics driver from Control panel – program and feature option and restart the system, let windows install the default driver for that and check if the issue still persist.
And also check removing the cap of the Track-point and check if there is any dust inside that.
Click here for complete details on Track-point settings.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
T30 freezing issues and Touchpad & Trackpoint buttons not working.
Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
Message Edited by GoalieFergy53 on 02-14-2009 02:30 PMMy T42p Touchpad and Trackpoint work fine however,
the buttons are not responding properly.
I'm forced to use an optical mouse to properly maneuver when working on
the screen.
When the well is dry, we'll all know the value of water. -
T60 freezes when moving trackpoint right after boot
Hello,
I have been experiencing this issue for quite a long time. Initially I thought it was due to an update for Windows XP, but I couldn't find any message on the logs when the laptop hangs. I re-installed XP several times to discard any software-related incompatibility, but even with a fresh install it was happening.
I recently realized after several tests that the problem occurred more frequently when moving the mouse (trackpoint or touchpad) right after system boot (either cold boot or boot from hibernation). What I found out is that it will no longer happen if I suspend the laptop after the system has started, not touching the mouse.
The symptoms are that Windows freezes. No HD activity at all, system doesn't respond to any mouse/keyboard input. If I close the laptop cover the system doesn't hibernate. The only way to resume normal operation is pressing the power off button for a few seconds, so the system turns off, then turn on normally.
All drivers are up to date.
Has anyone experience this issue?
Thanks
Solved!
Go to Solution.Try to remove your battery... If battery is dead it might give you this problem...
-
Intermittent freezing bug with FPS games on T60p
I have a Lenovo T60p with the latest graphics driver from the lenovo site, but this problem has been pestering me for years and I'm tired of it. So, I wondered if anyone had a similar issue and/or a solution.
SO, the problem. In EVERY single FPS game I've played, from Left 4 Dead to Battlefield 2, the game will freeze for 3-5 seconds every 30 seconds or so. It's not so big a deal with single player games, really just an irritant, because when I freeze so do all the enemies. However, it's VERY annoying in multiplayer games where standing still for 3-5 seconds with no warning gets you very dead and very frustrated.
I want it to stop. ANY ideas would be appreciated.Unfortunately this hasn't worked. I can get to the stage where I just have "Standard VGA Adapter" installed but when I run the Catalyst install it doesn't detect my hardware and I get the "driver not compatible" message in Catalyst Control Centre.
I've tried all sorts of combinations now, even tried extracting just the driver from the Bootcamp DVD and installing that then the Catalyst but still having no luck. I think what it boils down to is that you only seem to be able to install the Bootcamp driver which obviously doesn't work very well!
Wondering if this problem occurs in Xp or Vista cause I don't mind downgrading if this problem does not occur on other Windows versions. -
Hello,
I have a new issue since i updated my t60p. I opened it to add a SSD and a new processor (T7200), and since i reassembled it, my trackpoint doesn't work unless i unplug the palm rest (so the touchpad id unplugged).
If I plug the palm rest, the trackpoint stops to work. It does it even on a linux live cd, so it is not a driver problem.
In the bios both trackpoint and touchpad are set on "automatic".
Do you know this issue guys ?
ThanksThis is odd, but if what you report is 100% accurate, then it must be caused by the disassembly, so I would suspect the keyboard connector. Try unplugging and replugging it on the system board. While it's off take a good look at both connectors with a jewers loop, see if you see any damage. If you do, don't go any further without extreme caution. The keyboard can be replaced very inexpensively, but if you damage the connector on the board, you're looking at a lot of work and money.
I'll also state that I've done this hundreds of times and never had a problem like this, so it really sounds more like a software problem, but I won't doubt that you have ruled out that posibility, but you might want to double check. Also make sure all the other keys work on your keyboard... in fact you may want to do that first. If your connector is damaged or not seated properly, it's probable that other keys won't be working too. There are many software programs to test keyboards, There are also online tests you can use. I found this one on a google search, but I make no claims to it's function, or the safety of the webpage....
keyboardtester.com
So use it at your own risk
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram) -
Trackpoint in Thinkpad X121e not always working
Hi,
my Lenovo Thinkpad X121e runs with ArchLinux x86_64 and all packages updated (no testing versions). All worked fine, but since a while i have the problem, that the trackpoint sometimes does not work. This occurs randomly at startup. Sometimes it works, sometimes not. If it works, it keeps working all the time the machine is running. If it is not running, after a reboot it will most likely work. This problem seems to occur randomly at about every tenth start of the machine. I remember that the trackpoint did work without problems in the past, but some update in the last few months has killed it. I currently cannot figure out, why this happens.
I attached the dmesg and lsmod output for the working and non-working state of the trackpoint. If you need more info, please ask. I hope someone can help me :-)
Thanks.
Edit: Added also the Xorg.0.logs for working and non-working states.
dmesg with a working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.524 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.09 BogoMIPS (lpj=5321746)
[ 0.003347] pid_max: default: 32768 minimum: 301
[ 0.003396] Security Framework initialized
[ 0.003405] AppArmor: AppArmor disabled by boot time parameter
[ 0.004113] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007521] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008760] Mount-cache hash table entries: 256
[ 0.009042] Initializing cgroup subsys cpuacct
[ 0.009050] Initializing cgroup subsys memory
[ 0.009069] Initializing cgroup subsys devices
[ 0.009073] Initializing cgroup subsys freezer
[ 0.009077] Initializing cgroup subsys net_cls
[ 0.009080] Initializing cgroup subsys blkio
[ 0.009143] tseg: 00c7e00000
[ 0.009147] CPU: Physical Processor ID: 0
[ 0.009150] CPU: Processor Core ID: 0
[ 0.009154] mce: CPU supports 6 MCE banks
[ 0.011336] ACPI: Core revision 20120111
[ 0.026703] ftrace: allocating 17489 entries in 69 pages
[ 0.037262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071189] CPU0: AMD E-350 Processor stepping 00
[ 0.073329] Performance Events: AMD PMU driver.
[ 0.073329] ... version: 0
[ 0.073329] ... bit width: 48
[ 0.073329] ... generic registers: 4
[ 0.073329] ... value mask: 0000ffffffffffff
[ 0.073329] ... max period: 00007fffffffffff
[ 0.073329] ... fixed-purpose events: 0
[ 0.073329] ... event mask: 000000000000000f
[ 0.090166] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.116773] Booting Node 0, Processors #1 Ok.
[ 0.116781] smpboot cpu 1: start_ip = 98000
[ 0.130046] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136704] Brought up 2 CPUs
[ 0.136716] Total of 2 processors activated (6388.18 BogoMIPS).
[ 0.137266] devtmpfs: initialized
[ 0.140921] PM: Registering ACPI NVS region at c730d000 (524288 bytes)
[ 0.141584] NET: Registered protocol family 16
[ 0.141951] ACPI: bus type pci registered
[ 0.142141] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.142147] PCI: not using MMCONFIG
[ 0.142150] PCI: Using configuration type 1 for base access
[ 0.142153] PCI: Using configuration type 1 for extended access
[ 0.143469] bio: create slab <bio-0> at 0
[ 0.143469] ACPI: Added _OSI(Module Device)
[ 0.143469] ACPI: Added _OSI(Processor Device)
[ 0.143469] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.146754] ACPI: EC: Look up EC in DSDT
[ 0.157302] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161305] ACPI: Interpreter enabled
[ 0.161305] ACPI: (supports S0 S3 S4 S5)
[ 0.161305] ACPI: Using IOAPIC for interrupt routing
[ 0.161305] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000)
[ 0.163624] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in ACPI motherboard resources
[ 0.169819] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.175499] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.177428] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.177818] ACPI: No dock devices found.
[ 0.177828] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.180145] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.181866] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.181872] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c1fff]
[ 0.181877] pci_root PNP0A08:00: host bridge window [mem 0x000c2000-0x000c3fff]
[ 0.181881] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c5fff]
[ 0.181885] pci_root PNP0A08:00: host bridge window [mem 0x000c6000-0x000c7fff]
[ 0.181890] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000c9fff]
[ 0.181894] pci_root PNP0A08:00: host bridge window [mem 0x000ca000-0x000cbfff]
[ 0.181898] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cdfff]
[ 0.181902] pci_root PNP0A08:00: host bridge window [mem 0x000ce000-0x000cffff]
[ 0.181906] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.181910] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.181915] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.181919] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.181923] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.181927] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.181931] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.181935] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.181940] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e1fff]
[ 0.181944] pci_root PNP0A08:00: host bridge window [mem 0x000e2000-0x000e3fff]
[ 0.181948] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e5fff]
[ 0.181952] pci_root PNP0A08:00: host bridge window [mem 0x000e6000-0x000e7fff]
[ 0.181956] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000e9fff]
[ 0.181960] pci_root PNP0A08:00: host bridge window [mem 0x000ea000-0x000ebfff]
[ 0.181964] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000edfff]
[ 0.181968] pci_root PNP0A08:00: host bridge window [mem 0x000ee000-0x000effff]
[ 0.181973] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.181977] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff]
[ 0.181981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.181985] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182002] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
[ 0.182081] PCI host bridge to bus 0000:00
[ 0.182085] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.182090] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
[ 0.182094] pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
[ 0.182098] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
[ 0.182102] pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
[ 0.182106] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
[ 0.182110] pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
[ 0.182114] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
[ 0.182117] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
[ 0.182121] pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
[ 0.182125] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
[ 0.182129] pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
[ 0.182133] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
[ 0.182137] pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
[ 0.182141] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
[ 0.182144] pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
[ 0.182148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
[ 0.182152] pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
[ 0.182156] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
[ 0.182160] pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
[ 0.182164] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
[ 0.182168] pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
[ 0.182172] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
[ 0.182176] pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
[ 0.182180] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
[ 0.182184] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffffffff]
[ 0.182187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.182191] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.182208] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.182268] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.182283] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.182294] pci 0000:00:01.0: reg 14: [io 0x4000-0x40ff]
[ 0.182304] pci 0000:00:01.0: reg 18: [mem 0xf0300000-0xf033ffff]
[ 0.182367] pci 0000:00:01.0: supports D1 D2
[ 0.182392] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.182405] pci 0000:00:01.1: reg 10: [mem 0xf0344000-0xf0347fff]
[ 0.182478] pci 0000:00:01.1: supports D1 D2
[ 0.182559] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.182638] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.182671] pci 0000:00:06.0: [1022:1514] type 1 class 0x000604
[ 0.182749] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.182845] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.182872] pci 0000:00:11.0: reg 10: [io 0x4118-0x411f]
[ 0.182886] pci 0000:00:11.0: reg 14: [io 0x4124-0x4127]
[ 0.182900] pci 0000:00:11.0: reg 18: [io 0x4110-0x4117]
[ 0.182915] pci 0000:00:11.0: reg 1c: [io 0x4120-0x4123]
[ 0.182929] pci 0000:00:11.0: reg 20: [io 0x4100-0x410f]
[ 0.182943] pci 0000:00:11.0: reg 24: [mem 0xf034a000-0xf034a3ff]
[ 0.183027] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.183047] pci 0000:00:12.0: reg 10: [mem 0xf0349000-0xf0349fff]
[ 0.183144] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.183171] pci 0000:00:12.2: reg 10: [mem 0xf034a500-0xf034a5ff]
[ 0.183281] pci 0000:00:12.2: supports D1 D2
[ 0.183285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.183337] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.183357] pci 0000:00:13.0: reg 10: [mem 0xf0348000-0xf0348fff]
[ 0.183455] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.183481] pci 0000:00:13.2: reg 10: [mem 0xf034a400-0xf034a4ff]
[ 0.183591] pci 0000:00:13.2: supports D1 D2
[ 0.183594] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.183629] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.183736] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.183767] pci 0000:00:14.2: reg 10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.183855] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.183879] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.183982] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.184052] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.184102] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.184146] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.184192] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.184251] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.184295] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.184339] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.184383] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.184555] pci 0000:01:00.0: [10ec:8176] type 0 class 0x000280
[ 0.184577] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.184612] pci 0000:01:00.0: reg 18: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.184714] pci 0000:01:00.0: supports D1 D2
[ 0.184718] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190067] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.190089] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.190101] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.190192] pci 0000:02:00.0: [1969:1083] type 0 class 0x000200
[ 0.190224] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.190239] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
[ 0.190356] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196733] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.196755] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.196767] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.196860] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.196875] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196881] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
[ 0.196885] pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
[ 0.196890] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
[ 0.196894] pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
[ 0.196899] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
[ 0.196903] pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
[ 0.196921] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
[ 0.196925] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.196930] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.196935] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.196939] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.196944] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.196948] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.196953] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.196957] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.196962] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
[ 0.196966] pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
[ 0.196971] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
[ 0.196975] pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
[ 0.196980] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
[ 0.196984] pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
[ 0.196989] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
[ 0.196993] pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
[ 0.196998] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.197002] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xffffffff] (subtractive decode)
[ 0.197007] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.197011] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.197091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.197382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.197462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.197622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.197990] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.198396] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.207341] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
[ 0.207552] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
[ 0.207715] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
[ 0.207830] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
[ 0.207926] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
[ 0.208048] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
[ 0.208177] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
[ 0.208300] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
[ 0.208426] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208426] vgaarb: loaded
[ 0.208426] vgaarb: bridge control possible 0000:00:01.0
[ 0.208426] PCI: Using ACPI for IRQ routing
[ 0.210067] PCI: pci_cache_line_size set to 64 bytes
[ 0.210205] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.210210] reserve RAM buffer: 00000000c6efd000 - 00000000c7ffffff
[ 0.210215] reserve RAM buffer: 00000000c7e00000 - 00000000c7ffffff
[ 0.210219] reserve RAM buffer: 000000011f000000 - 000000011fffffff
[ 0.210416] NetLabel: Initializing
[ 0.210420] NetLabel: domain hash size = 128
[ 0.210422] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210446] NetLabel: unlabeled traffic allowed by default
[ 0.210504] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210511] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.212540] Switching to clocksource hpet
[ 0.225756] pnp: PnP ACPI init
[ 0.225801] ACPI: bus type pnp registered
[ 0.226870] pnp 00:00: [bus 00-ff]
[ 0.226876] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.226881] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.226885] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.226889] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.226893] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.226897] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.226901] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.226904] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.226908] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.226912] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.226920] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.226924] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.226927] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.226931] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.226935] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.226938] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.226942] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.226946] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.226950] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.226953] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.226957] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.226961] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.226964] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.226968] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.226972] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.226976] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.226979] pnp 00:00: [mem 0xf8000000-0xffffffff window]
[ 0.226984] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.226987] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.226991] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.227102] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.227189] pnp 00:01: [io 0x0f50-0x0f51]
[ 0.227194] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.227198] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.227201] pnp 00:01: [mem 0xf8000000-0xf9ffffff]
[ 0.227291] system 00:01: [io 0x0f50-0x0f51] has been reserved
[ 0.227298] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.227303] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.227308] system 00:01: [mem 0xf8000000-0xf9ffffff] has been reserved
[ 0.227314] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228056] pnp 00:02: [io 0x0000-0x001f]
[ 0.228060] pnp 00:02: [io 0x0081-0x008f]
[ 0.228063] pnp 00:02: [io 0x00c0-0x00de]
[ 0.228066] pnp 00:02: [io 0x040b]
[ 0.228069] pnp 00:02: [io 0x04d6]
[ 0.228073] pnp 00:02: [dma 4]
[ 0.228138] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.228155] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.228221] pnp 00:03: [irq 13]
[ 0.228286] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.228306] pnp 00:04: [io 0x0070-0x0071]
[ 0.228361] pnp 00:04: [irq 8]
[ 0.228418] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228434] pnp 00:05: [io 0x0061]
[ 0.228496] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.228516] pnp 00:06: [io 0x0060]
[ 0.228519] pnp 00:06: [io 0x0064]
[ 0.228528] pnp 00:06: [irq 1]
[ 0.228598] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.228686] pnp 00:07: [irq 12]
[ 0.228746] pnp 00:07: Plug and Play ACPI device, IDs LEN0026 PNP0f13 (active)
[ 0.228772] pnp 00:08: [io 0x0022-0x0023]
[ 0.228775] pnp 00:08: [io 0x002e-0x002f]
[ 0.228779] pnp 00:08: [io 0x0072-0x0073]
[ 0.228785] pnp 00:08: [io 0x0080]
[ 0.228789] pnp 00:08: [io 0x0092]
[ 0.228792] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.228795] pnp 00:08: [io 0x00b2]
[ 0.228798] pnp 00:08: [io 0x00b8]
[ 0.228801] pnp 00:08: [io 0x00bc]
[ 0.228804] pnp 00:08: [io 0x00f0]
[ 0.228807] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.228810] pnp 00:08: [io 0x0530-0x0537]
[ 0.228813] pnp 00:08: [io 0x0800-0x0827]
[ 0.228817] pnp 00:08: [io 0x0830]
[ 0.228820] pnp 00:08: [io 0x0840-0x0847]
[ 0.228823] pnp 00:08: [io 0x0b00-0x0b1f]
[ 0.228826] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.228829] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.228832] pnp 00:08: [io 0x0c14]
[ 0.228835] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.228839] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.228842] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.228845] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.228848] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.228851] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.228854] pnp 00:08: [io 0x0cf9]
[ 0.228858] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.228862] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.228977] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.228982] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.228987] system 00:08: [io 0x0800-0x0827] has been reserved
[ 0.228991] system 00:08: [io 0x0830] has been reserved
[ 0.228996] system 00:08: [io 0x0840-0x0847] has been reserved
[ 0.229000] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 0.229005] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.229009] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.229014] system 00:08: [io 0x0c14] has been reserved
[ 0.229018] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.229023] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.229027] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.229032] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.229036] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.229041] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.229045] system 00:08: [io 0x0cf9] could not be reserved
[ 0.229050] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.229055] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.229061] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.229217] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.229221] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.229225] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.229229] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.229233] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.229236] pnp 00:09: [mem 0xfed61000-0xfed613ff]
[ 0.229240] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.229272] pnp 00:09: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xf8000000-0xf9ffffff]; adding more reservations
[ 0.229345] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.229351] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.229356] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.229360] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.229365] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved
[ 0.229370] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.229376] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229807] pnp: PnP ACPI: found 10 devices
[ 0.229815] ACPI: ACPI bus type pnp unregistered
[ 0.242341] PCI: max bus depth: 1 pci_try_num: 2
[ 0.242430] pci 0000:00:05.0: PCI bridge to [bus 01-01]
[ 0.242437] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 0.242445] pci 0000:00:05.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.242455] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.242461] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
[ 0.242467] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.242477] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.242564] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242569] pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242573] pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242578] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242582] pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242586] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242590] pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242594] pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242598] pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242602] pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242606] pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242610] pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242614] pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242618] pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242622] pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242626] pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242629] pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242633] pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242637] pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242641] pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242645] pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242649] pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242653] pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242657] pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242661] pci_bus 0000:00: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242665] pci_bus 0000:00: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242669] pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
[ 0.242673] pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
[ 0.242677] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.242681] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.242685] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.242689] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.242694] pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.242698] pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c1fff]
[ 0.242702] pci_bus 0000:04: resource 6 [mem 0x000c2000-0x000c3fff]
[ 0.242706] pci_bus 0000:04: resource 7 [mem 0x000c4000-0x000c5fff]
[ 0.242711] pci_bus 0000:04: resource 8 [mem 0x000c6000-0x000c7fff]
[ 0.242715] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000c9fff]
[ 0.242719] pci_bus 0000:04: resource 10 [mem 0x000ca000-0x000cbfff]
[ 0.242723] pci_bus 0000:04: resource 11 [mem 0x000cc000-0x000cdfff]
[ 0.242727] pci_bus 0000:04: resource 12 [mem 0x000d0000-0x000d1fff]
[ 0.242731] pci_bus 0000:04: resource 13 [mem 0x000d2000-0x000d3fff]
[ 0.242735] pci_bus 0000:04: resource 14 [mem 0x000d4000-0x000d5fff]
[ 0.242739] pci_bus 0000:04: resource 15 [mem 0x000d6000-0x000d7fff]
[ 0.242743] pci_bus 0000:04: resource 16 [mem 0x000d8000-0x000d9fff]
[ 0.242746] pci_bus 0000:04: resource 17 [mem 0x000da000-0x000dbfff]
[ 0.242750] pci_bus 0000:04: resource 18 [mem 0x000dc000-0x000ddfff]
[ 0.242755] pci_bus 0000:04: resource 19 [mem 0x000de000-0x000dffff]
[ 0.242759] pci_bus 0000:04: resource 20 [mem 0x000e0000-0x000e1fff]
[ 0.242763] pci_bus 0000:04: resource 21 [mem 0x000e2000-0x000e3fff]
[ 0.242767] pci_bus 0000:04: resource 22 [mem 0x000e4000-0x000e5fff]
[ 0.242771] pci_bus 0000:04: resource 23 [mem 0x000e6000-0x000e7fff]
[ 0.242775] pci_bus 0000:04: resource 24 [mem 0x000e8000-0x000e9fff]
[ 0.242779] pci_bus 0000:04: resource 25 [mem 0x000ea000-0x000ebfff]
[ 0.242783] pci_bus 0000:04: resource 26 [mem 0x000ec000-0x000edfff]
[ 0.242787] pci_bus 0000:04: resource 27 [mem 0x000ee000-0x000effff]
[ 0.242791] pci_bus 0000:04: resource 28 [mem 0xe0000000-0xf7ffffff]
[ 0.242795] pci_bus 0000:04: resource 29 [mem 0xf8000000-0xffffffff]
[ 0.242799] pci_bus 0000:04: resource 30 [io 0x0000-0x0cf7]
[ 0.242803] pci_bus 0000:04: resource 31 [io 0x0d00-0xffff]
[ 0.242879] NET: Registered protocol family 2
[ 0.243147] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.245284] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.250181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.250766] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.250771] TCP reno registered
[ 0.250804] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.250858] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.251058] NET: Registered protocol family 1
[ 0.251088] pci 0000:00:01.0: Boot video device
[ 0.383864] PCI: CLS 32 bytes, default 64
[ 0.383965] Unpacking initramfs...
[ 0.478532] Freeing initrd memory: 2588k freed
[ 0.480190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.480198] Placing 64MB software IO TLB between ffff8800c2efd000 - ffff8800c6efd000
[ 0.480203] software IO TLB at phys 0xc2efd000 - 0xc6efd000
[ 0.480963] perf: AMD IBS detected (0x000000ff)
[ 0.481379] audit: initializing netlink socket (disabled)
[ 0.481404] type=2000 audit(1339340302.479:1): initialized
[ 0.482558] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.487036] VFS: Disk quotas dquot_6.5.2
[ 0.487152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.487326] msgmni has been set to 7109
[ 0.487931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.488040] io scheduler noop registered
[ 0.488044] io scheduler deadline registered
[ 0.488154] io scheduler cfq registered (default)
[ 0.488395] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.488550] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.488682] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.488687] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.488694] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.488719] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 0.488723] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.488729] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 0.488942] GHES: HEST is not enabled!
[ 0.489246] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.490367] Linux agpgart interface v0.103
[ 0.490508] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.492943] i8042: Detected active multiplexing controller, rev 1.1
[ 0.496025] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.496088] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.496136] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.496180] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.496225] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.496472] mousedev: PS/2 mouse device common for all mice
[ 0.496667] rtc_cmos 00:04: RTC can wake from S4
[ 0.497028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.497119] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.497144] cpuidle: using governor ladder
[ 0.497148] cpuidle: using governor menu
[ 0.497476] TCP cubic registered
[ 0.497700] NET: Registered protocol family 10
[ 0.498445] NET: Registered protocol family 17
[ 0.498453] Registering the dns_resolver key type
[ 0.499372] PM: Hibernation image not present or could not be loaded.
[ 0.499393] registered taskstats version 1
[ 0.500327] rtc_cmos 00:04: setting system clock to 2012-06-10 14:58:23 UTC (1339340303)
[ 0.500417] Initializing network drop monitor service
[ 0.502828] Freeing unused kernel memory: 732k freed
[ 0.503217] Write protecting the kernel read-only data: 8192k
[ 0.513112] Freeing unused kernel memory: 1628k freed
[ 0.518185] Freeing unused kernel memory: 656k freed
[ 0.536071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.539774] udevd[37]: starting version 184
[ 0.613296] usbcore: registered new interface driver usbfs
[ 0.613442] usbcore: registered new interface driver hub
[ 0.619684] usbcore: registered new device driver usb
[ 0.620711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.621584] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.621640] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.621702] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.621746] QUIRK: Enable AMD PLL fix
[ 0.621810] ehci_hcd 0000:00:12.2: debug port 1
[ 0.621850] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034a500
[ 0.630117] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.630310] SCSI subsystem initialized
[ 0.636369] hub 1-0:1.0: USB hub found
[ 0.636381] hub 1-0:1.0: 5 ports detected
[ 0.636783] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.636805] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.636818] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.636859] ehci_hcd 0000:00:13.2: debug port 1
[ 0.636884] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034a400
[ 0.637204] libata version 3.00 loaded.
[ 0.640574] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.646781] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.647066] hub 2-0:1.0: USB hub found
[ 0.647076] hub 2-0:1.0: 5 ports detected
[ 0.647328] ahci 0000:00:11.0: version 3.0
[ 0.647600] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.647608] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.648432] scsi0 : ahci
[ 0.648735] ata1: SATA max UDMA/133 abar m1024@0xf034a000 port 0xf034a100 irq 19
[ 0.648890] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.648918] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.649020] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0349000
[ 0.704676] hub 3-0:1.0: USB hub found
[ 0.704691] hub 3-0:1.0: 5 ports detected
[ 0.706337] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.706357] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.706392] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0348000
[ 0.761543] hub 4-0:1.0: USB hub found
[ 0.761558] hub 4-0:1.0: 5 ports detected
[ 1.137007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.138642] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70B, max UDMA/100
[ 1.138651] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.140067] ata1.00: configured for UDMA/100
[ 1.140658] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
[ 1.144742] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.144844] sd 0:0:0:0: [sda] Write Protect is off
[ 1.144850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.144893] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.185183] sda: sda1 sda2 sda3 sda4
[ 1.187123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.483438] Refined TSC clocksource calibration: 1596.599 MHz.
[ 1.483459] Switching to clocksource tsc
[ 1.820777] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.075750] udevd[314]: starting version 185
[ 4.538235] cfg80211: Calling CRDA to update world regulatory domain
[ 4.618824] Using firmware rtlwifi/rtl8192cfw.bin
[ 4.664522] ACPI: acpi_idle registered with cpuidle
[ 4.677193] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 4.677322] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 4.677326] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 4.677329] powernow-k8: 2 : pstate 2 (800 MHz)
[ 5.014794] ACPI: AC Adapter [ACAD] (on-line)
[ 5.015426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.015836] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 5.016050] ACPI: Power Button [PWRB]
[ 5.016149] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 5.016283] ACPI: Sleep Button [SLPB]
[ 5.016405] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.033809] ACPI: Lid Switch [LID]
[ 5.033969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.034129] ACPI: Power Button [PWRF]
[ 5.047632] acpi device:34: registered as cooling_device2
[ 5.051373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 5.051525] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 5.076994] ACPI: Battery Slot [BAT1] (battery present)
[ 5.131780] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.131788] ACPI: Thermal Zone [THZ0] (43 C)
[ 5.142726] wmi: Mapper loaded
[ 5.157792] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.227665] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.227836] SP5100 TCO timer: mmio address 0xb80830 already in use
[ 5.363443] Non-volatile memory driver v1.3
[ 5.428563] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[ 5.450972] [drm] Initialized drm 1.1.0 20060810
[ 5.527616] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 5.529303] rtlwifi: wireless switch is on
[ 5.694564] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 5.694576] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.694582] thinkpad_acpi: ThinkPad BIOS 8RET26WW (1.08 ), EC unknown
[ 5.694590] thinkpad_acpi: Lenovo ThinkPad X120e, model 30515QG
[ 5.697439] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 5.698186] thinkpad_acpi: radio switch found; radios are enabled
[ 5.698221] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.700698] Registered led device: tpacpi::power
[ 5.700736] Registered led device: tpacpi::standby
[ 5.700775] Registered led device: tpacpi::thinkvantage
[ 5.702194] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.703379] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.708361] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.766552] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120111/utaddress-251)
[ 5.766583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.767192] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
[ 5.780051] [drm] radeon defaulting to kernel modesetting.
[ 5.780059] [drm] radeon kernel modesetting enabled.
[ 5.817461] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.817754] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[ 6.023285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[ 6.032362] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21EC).
[ 6.033956] [drm] register mmio base: 0xF0300000
[ 6.033959] [drm] register mmio size: 262144
[ 6.034116] ATOM BIOS: Lenovo
[ 6.034164] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 6.034170] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
[ 6.034639] [drm] Detected VRAM RAM=384M, BAR=256M
[ 6.034646] [drm] RAM width 32bits DDR
[ 6.037931] [TTM] Zone kernel: Available graphics memory: 1821664 kiB.
[ 6.037938] [TTM] Initializing pool allocator.
[ 6.037949] [TTM] Initializing DMA pool allocator.
[ 6.038006] [drm] radeon: 384M of VRAM memory ready
[ 6.038010] [drm] radeon: 512M of GTT memory ready.
[ 6.038055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.038059] [drm] Driver supports precise vblank timestamp query.
[ 6.038123] radeon 0000:00:01.0: irq 43 for MSI/MSI-X
[ 6.038144] radeon 0000:00:01.0: radeon: using MSI.
[ 6.038191] [drm] radeon: irq initialized.
[ 6.038201] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.041298] [drm] radeon: ib pool ready.
[ 6.043305] [drm] Loading PALM Microcode
[ 6.088021] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 6.088318] radeon 0000:00:01.0: WB enabled
[ 6.088330] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffff880118705c00
[ 6.110048] [drm] ring test on 0 succeeded in 1 usecs
[ 6.111109] [drm] ib test on ring 0 succeeded in 0 usecs
[ 6.111934] [drm] Radeon Display Connectors
[ 6.111938] [drm] Connector 0:
[ 6.111940] [drm] LVDS
[ 6.111943] [drm] HPD1
[ 6.111947] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.111950] [drm] Encoders:
[ 6.111953] [drm] LCD1: INTERNAL_UNIPHY
[ 6.111956] [drm] Connector 1:
[ 6.111958] [drm] HDMI-A
[ 6.111960] [drm] HPD2
[ 6.111964] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.111967] [drm] Encoders:
[ 6.111969] [drm] DFP1: INTERNAL_UNIPHY
[ 6.111971] [drm] Connector 2:
[ 6.111973] [drm] VGA
[ 6.111977] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 6.111980] [drm] Encoders:
[ 6.111982] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.112043] [drm] Internal thermal controller without fan control
[ 6.112128] [drm] radeon: power management initialized
[ 6.151134] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00
[ 6.151161] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 6.194596] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 6.588128] [drm] fb mappable at 0xE0142000
[ 6.588135] [drm] vram apper at 0xE0000000
[ 6.588139] [drm] size 4325376
[ 6.588142] [drm] fb depth is 24
[ 6.588145] [drm] pitch is 5632
[ 6.588616] fbcon: radeondrmfb (fb0) is primary device
[ 7.109264] Console: switching to colour frame buffer device 170x48
[ 7.118245] fb0: radeondrmfb frame buffer device
[ 7.118248] drm: registered panic notifier
[ 7.118262] [drm] Initialized radeon 2.13.0 20080528 for 0000:00:01.0 on minor 0
[ 7.852228] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.961705] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.003845] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.011207] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.094702] Adding 15623208k swap on /dev/sda2. Priority:-1 extents:1 across:15623208k
[ 9.918662] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[ 9.999979] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.082650] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 12.315710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
[ 13.383760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.701075] wlan0: authenticate with 0c:60:76:4a:8c:44 (try 1)
[ 15.702630] wlan0: authenticated
[ 15.725379] wlan0: associate with 0c:60:76:4a:8c:44 (try 1)
[ 15.728291] wlan0: RX AssocResp from 0c:60:76:4a:8c:44 (capab=0x411 status=0 aid=2)
[ 15.728299] wlan0: associated
[ 15.728306] wlan0: moving STA 0c:60:76:4a:8c:44 to state 1
[ 15.728310] wlan0: moving STA 0c:60:76:4a:8c:44 to state 2
[ 15.729381] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.085499] EXT4-fs (sda3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.126474] Intel AES-NI instructions are not detected.
[ 16.133570] EXT4-fs (sda4): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
[ 16.140127] wlan0: moving STA 0c:60:76:4a:8c:44 to state 3
[ 16.184502] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1
[ 24.359763] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 24.565842] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 26.590021] wlan0: no IPv6 routers present
[ 42.605282] fuse init (API version 7.18)
dmesg with a non-working trackpoint:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c6efd000 (usable)
[ 0.000000] BIOS-e820: 00000000c6efd000 - 00000000c730d000 (reserved)
[ 0.000000] BIOS-e820: 00000000c730d000 - 00000000c738d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c738d000 - 00000000c73ed000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c73ed000 - 00000000c7e00000 (usable)
[ 0.000000] BIOS-e820: 00000000c7e00000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed81000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 30515QG/30515QG, BIOS 8RET26WW (1.08 ) 06/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0FFF90000 mask FFFFF0000 uncachable
[ 0.000000] 4 base 0FED80000 mask FFFFFF000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7e00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7e00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] kernel direct mapping tables up to c7e00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f000000
[ 0.000000] 0100000000 - 011f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f000000 @ c7dfe000-c7e00000
[ 0.000000] RAMDISK: 37d69000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v04 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c73ec120 00074 (v01 LENOVO TP-8R 00000003 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000c73da000 000F4 (v04 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000c73dc000 0EAF9 (v01 LENOVO TP-8R 00001000 PTEC 00001080)
[ 0.000000] ACPI: FACS 00000000c7378000 00040
[ 0.000000] ACPI: SLIC 00000000c73eb000 00176 (v01 LENOVO TP-8R 00001080 PTEC 00000001)
[ 0.000000] ACPI: HPET 00000000c73d9000 00038 (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000c73d8000 0005E (v02 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000c73d7000 0003C (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d6000 0003E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000c73d5000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d4000 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c73d2000 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: UEFI 00000000c73d1000 0013E (v01 LENOVO TP-8R 00001080 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f000000
[ 0.000000] NODE_DATA [000000011effb000 - 000000011effffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000c6efd
[ 0.000000] 0: 0x000c73ed -> 0x000c7e00
[ 0.000000] 0: 0x00100000 -> 0x0011f000
[ 0.000000] On node 0 totalpages: 944285
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 797008 pages, LIFO batch:31
[ 0.000000] Normal zone: 1984 pages used for memmap
[ 0.000000] Normal zone: 124992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c6efd000 - 00000000c730d000
[ 0.000000] PM: Registered nosave memory: 00000000c730d000 - 00000000c738d000
[ 0.000000] PM: Registered nosave memory: 00000000c738d000 - 00000000c73ed000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
[ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 925912
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3637724k/4702208k available (4496k kernel code, 925068k absent, 139416k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 15204352 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgrOK, ignore my last post pointing the finger at udev.
I poked around in the kernel code; it was actually kinda fun. Now this looks more like either a hardware problem (unlikely) or a driver bug (more likely) to me:
http://ubuntuforums.org/showthread.php?t=1894892
Thought I'd pass along what I found.
During a boot, the kernel will "walk" all the buses looking for devices. The methods used to find them on some buses (like PCI) are well defined, while others are not (like the serial bus). On those buses that aren't well defined the kernel will (probably) literally "probe" the bus trying to not only find a device, but also determine the exact chip installed.
It's the second case that's involved in your problem. The serio driver found the Synaptics touchpad device (via probing). If you look closely at the kernel log, you'll see it's attached to your i8042 (PS/2) chip. But... since this touchpad device has a "passthru port", it has to perform extra steps to determine if there's a chip on the "other side" of that touchpad chip. In your case there is, and it's your Trackpoint.
If it's successful in finding the Trackpoint chip, the drivers/input/mouse/trackpoint.c kernel driver file will put the following in your syslog:
IBM TrackPoint firmware: 0x0e, buttons: 3/3
Which is what you see in your logs when it works. Since you don't see it when it fails, then the code probably isn't being executed or it's failing with an error condition.
Now... when a driver finds a device, it usually (but not always) creates some virtual "files" in the /sys directory... and that's what will happen if that trackpoint.c code is executed...
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input11
So... one question is... "Does it create something in /sys when it fails?". From looking at the code, I highly doubt it.
Although this looks somewhat improbable, if the error path for this section of the code in the trackpoint_detect function of /drivers/input/mouse/trackpoint.c file is executed then it looks like it might match your error:
psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
if (!psmouse->private)
return -ENOMEM;
Perhaps you might want to put some sort of printk call in there to see if that's what's happening. Heck, also add one to the top of the function to see if it's even being called.
Good luck. -
Funny story! Sending in my T60p a THIRD TIME
Hey guys!
I am EXTREMELY angry right now [and resisting the urge to use MUCH stronger words], but I think my ThinkPad will ACTUALLY COME BACK FIXED THIS TIME!
My ThinkPad is going to be sent to competent technicians! YAY! Not the piece of crap technicians that have screwed with my laptop the past two times, REAL TECHNICIANS that will completely disassemble my laptop and test every component!
ThinkPad Service: Quick, but UNEFFECTIVE!
Here's my fun little history with my ThinkPad T60p!
Stats:
- ThinkPad T60p
- Core2Duo 2.00 GHz
- 2 GB RAM
- Windows XP Pro
- ATI FireGL V5250 [512 MB HyperMemory]
- 100 GB hard drive
- 3 year depot warranty [THANK THE LORD, I know from the problems I've had I'm going to need it frequently]
Initial Issues:
When I first received my laptop, I was overjoyed! It was extremely fast [once I removed the IBM bloatware], had a powerful GPU [no problems with Oblivion ], and ran quiet.
About 4 months in [December 2007?], my fan began making some noise, but it wasn't terribly noisy. Occasionally [usually when moving it] the fan became louder, but my system ran just fine. I also noticed that the ThinkPad froze on a reboot at the BIOS screen occasionally, but I cannot remember if this happened before the fan problem, or after. Since this was the middle of the college school year, I did not send in my laptop. It ran fine, and was still cool.
First issue:
Last month, my hard drive began to die. I rebooted Windows, and it stayed at the Windows loading screen (with the blue bar). A quick hard drive test in the BIOS revealed that my hard drive was failing, but I managed to easily back up all of my files using a Linux LiveCD. I decided that I would deal with the fan problem at the same time, since I figured I would need to send my laptop in.
The nice people in the Atlanta, Georgia facility (they are all very nice there) offered to send me the hard drive, but upon mentioning the fan problem, decided that I should send the laptop in. The next day, my box arrived, and I shipped it the day after that.
Laptop "Fixed"?:
I have heard horror stories of the laptops some of my college friends received back from depots, but none of them had ThinkPads! I purchased mine BECAUSE it had excellent support (not outsourced ), and that ThinkPads are built tough (or so I thought!).
So, I get my computer back, and, before opening the package, I think:
"I have a weird feeling. I bet they didn't fix the fan. If they didn't, I am going to be SO angry."
So, I open it, and I read the paper filled out by the technician (who I would LOVE to name here, but I'm sure that's illegal):
"Replaced hard drive"
I immediately dismiss all negative thoughts, because it's ThinkPad technical support! They wouldn't ignore the ENTIRE REASON I sent the laptop to them in the first place! I could have easily replaced the hard drive myself. No, the fan must have been such a small issue that it wasn't worth noting. A doubt did remain in my mind though.
I plugged in my laptop, turned her on, heard a LOUDER THAN BEFORE noise, and saw, printed on my screen:
FAN ERROR
My fan had completely failed. It was never replaced. I would LOVE to talk to this technician, and hear what "testing" he did with my laptop. It couldn't even boot, but he claimed it passed PC Doctor testing! How can you test it, when it can't boot? And, even if it did boot, how could you ignore the LOUD fan? I wanted him to come to my house, and TELL ME my laptop was fixed.
I called up the folks in Atlanta, Georgia again, and tried to restrain my anger. I work in the Helpdesk of my college, and I don't want to be angry at the nice people working there. I was only angry at the INCOMPETENT technician.
I verified with them that the fan error was reported on my previous case number, so it was the technician's fault. They set me up with a new case number, and I received the prepaid box the next day [last friday]. Since the fan was the only problem, I figured that it would easily be solved, and I would go on my merry way. I sent it back to them on the same day, and they received it on Saturday.
They fixed it over the weekend, and I received it on Monday. Now, that's what I call service! Or, do I?
Fixed at last?:
I open up the box, put the battery back in, plug in the AC adapter, and turned it on. First thing I heard: silence. The fan was replaced! It was quiet again! I installed XP Pro over the preloaded XP Home, configured it to my liking, and installed some programs. Everything was great! Since the service was so fast, I was ready to forgive lenovo, and move on! Happy ending, right?
NO! TERRIBLE ENDING! My ThinkPad is worse than ever!
Today, I decided to install the PC game "The Suffering" and play it on my 27" LCD TV/monitor. It's the first time I have gamed on my laptop in two weeks, since I had to wait that long for those two cases to be resolved. I boot it up, pump up the graphics settings (<3 FireGL), and begin the game.
At first, I noticed that the game was stuttering a bit. I figured that 6x antialiasing might have been pushing my graphics card to the limit, and noted to change it after saving for the first time. I save the game, go to quit the game, and my laptop TURNS OFF.
Yes, it turned off. No blue screen. It just DIED. I have never experienced anything like it before.
I turned on the computer, and, like usual, it froze at the BIOS. I turned it off, turned it on, and Windows XP didn't even know it wasn't shut down safely. It started without a hitch. This time, I decided to detach my external monitor, USB keyboard, and USB mouse, and play with just the ThinkPad. I turned down the antialiasing, started up the game, and noticed that it was still stuttering. A minute later, my ThinkPad turns off.
I become incredibly angry. My computer's GPU cannot even handle a simple game without killing my computer! I take deep breaths, and decide to install Oblivion, and see if that works. After all, maybe the game is just a piece of crap? I boot up my ThinkPad, it freezes at the BIOS, I turn it off, I turn it on, boot to Windows, and my keyboard isn't working. The ThinkPad FN combinations work [for example, I can turn on the ThinkLight with FN+PgUp, and I can turn on Num Lock with FN+Pause], but nothing else does. I reboot Windows, and the keyboard works as normal. Then, I did a quick Google search on the game I was playing, and nobody had the problem I was experiencing. But, it could have been a hardware incompatibility, right?
No. Wrong answer. I start up Oblivion, and it stutters IN THE BEGINNING CELL. It's an indoor scene. My computer usually has 0 slowdown in indoor areas in Oblivion. There is graphical glitching at the top of the screen. Then, my computer turns off. I become insanely angry. I use this laptop A LOT. I depend on it for MANY THINGS. I bought a ThinkPad because they are supposed to be RELIABLE. I should be able to have this thing turned on 24/7 with a 100% CPU load and have NO PROBLEMS.
I called up the people in Atlanta, Georgia about an hour ago (11:30PM EST), and calmly vented. I told my entire story, and the guy there was very understanding. Since this is the DAMNED THIRD CONSECUTIVE TIME I HAVE TO SEND MY LAPTOP IN, my case is going to be sent to ACTUAL COMPETENT TECHNICIANS who can FIX MY LAPTOP rather than completely screw it over when fixing a GOD **bleep** FAN. While I have no evidence that the second technician screwed up everything else, I NEVER had a problem with the GPU. And, since the first technician didn't have to take apart the laptop to replace the hard drive, I have no one else to blame. I believe it is a heating problem, so the second technician was probably the culprit, since he installed a new cooling fan in the upper left hand corner of the ThinkPad.
I was assured that my ThinkPad would be completely disassembled, and have every **bleep** component tested before I received it back. I am HOPING that this is the case. If I get another broken laptop back, I will even cuss to the nice people in Atlanta. My patience is already gone, and I don't even know how ludicrous I'll be if I have to get it fixed a fourth time. The only downside to this is that I may have to wait five days to get it repaired. If I do, and it's not fixed, I will demand a brand new laptop, and a renewed three year warranty beginning the day I receive the new laptop.
I paid for ThinkPad quality. If this is how ThinkPads are built, I am EXTREMELY disappointed. I expected that I would be able to treat this thing like a mature desktop -- leaving it on for weeks at a time, playing games at high graphics settings, and frequently having it use 100% of its CPU -- but I was wrong.
<3 Atlanta call center
</3 Low level technicians
-- End of Rant --
[PS: I also have one dead pixel now. It travels to different parts of the screen. I used a program that can get rid of such pixels, and it worked for about an hour. Then, the pixel returned. I am SO happy with my laptop right now, I could just die.]
Message Edited by Nintendud on 06-14-2008 01:00 AM
Moderator Note; Please watch your language.
Message Edited by andyP on 06-14-2008 12:30 PMHellbore:
Thanks for the confirmation of the technicians' ineptitude. The temperature tests confirmed for me that the problem is as you described, and I'm happy to hear the problem may be as simple, and common, as that. I'm wondering now if the technicians are put under an immense amount of stress and forced to be productive, or if they are really as incapable as they seem. I think I'll call the factory a day or so after they receive the laptop, and see if they can tell me whether or not the previous technician failed to install the fan properly. Then, I will ask the employee about the working conditions there. I doubt they will tell me the truth, but it can't hurt.
Thanks to this forum, I know that I can curse the Solectron company for sucking ass, despite the ThinkPad's excellent warranty. I wish there is something more I can do to improve the situation. I think it's funny that they run "PC Doctor" tests after replacing a fan that cools the GPU. If they just ran ANY 3D game on my card [or any application that stresses the GPU], they would realize that the fan was installed incorrectly.
This time, I am including a typed letter to the "high level" "technicians" "working" on my laptop that describes all of the problems with it in checklist form, and how to reproduce them. I will make sure that they can reproduce all of these things with software already installed on the computer. I will earnestly request that they be fixed. I doubt it will do anything, but it's the least I can do to make their job easier.
*sigh* Not knowing who or what to blame is making my job harder. I don't know whether to pity the technicians, or loathe them. :/ -
How should I find out the stuff that keeps freezing the display?
Hi,
I am using gnome-shell from testing repo on a laptop computer. The system(I do not know which part) has frozen several times in a same way. The whole display just suddenly stops reacting while I am scrolling down the web page in Chrome, opening a wine program, or something else. I have not figured out any pattern of its occurrence, so it's not repeatable for now. It seems that it's related to some modules or libraries used by Google Chrome browser or Wine because it mostly happens when I am interacting with Chrome browser.
It seems that only the display is frozen. I could not enter the tty with Ctrl + Alt + <F1...F8>, but I could move the cursor with my TrackPoint mouse. The NumLk/CapsLk LED also reacts normally. Even the network is working - when turning off and on the hardware switch of wireless, WiFi LED shows like the system is trying to reconnect the WiFi automatically.
If there's anything related Chrome, I guess one of the possible reasons is that when installing google-chrome-dev from AUR, I replaced libpci with libpciaccess in the depends array so that it won't cause a file exists conflict when installing.
Another possible reason is xinput, which I use for TrackPoint scrolling.
Now I am very curious in finding out what exactly it is that keeps freezing the display, but I'm not sure where to start. Could anyone give me some suggestions?
THANKSdemian wrote:I'd start my DE from the terminal and when it freezes use alt+sysrq to regain control and see what happened. alt+sysrq+r,e,i should bring you back to the terminal.
thanks, but my SysRq and PrtSc are on same button, and when I press Fn + Alt + [PrtSc, SysRq], the system just recognizes as Alt + PrtSc. This is weird.... -
Booting freeze when starting setup virtual console
Sometimes the computer will freeze when booting into
Started setup virtual console
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.5-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jul 10 07:10:15 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000376b0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000376b1000-0x00000000376b6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000376b7000-0x00000000377b9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000377ba000-0x000000003780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003780f000-0x0000000037907fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037908000-0x0000000037b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b0f000-0x0000000037b17fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b18000-0x0000000037b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000037b1f000-0x0000000037b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037b63000-0x0000000037b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037b9f000-0x0000000037bdffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037be0000-0x0000000037bfcfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037bfd000-0x0000000037bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037c00000-0x0000000037dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000038000000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 2847A65/2847A65, BIOS 6JET85WW (1.43 ) 12/24/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37c00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 038000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask FC0000000 write-back
[ 0.000000] 3 base 037E00000 mask FFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f74c0-0x000f74cf] mapped at [c00f74c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x376b0fff]
[ 0.000000] [mem 0x37400000-0x376b0fff] page 4k
[ 0.000000] BRK [0x0179e000, 0x0179efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x376b7000-0x377b9fff]
[ 0.000000] [mem 0x376b7000-0x377b9fff] page 4k
[ 0.000000] RAMDISK: [mem 0x36ac0000-0x36dfcfff]
[ 0.000000] ACPI: RSDP 0x000F7190 000024 (v04 PTLTD )
[ 0.000000] ACPI: XSDT 0x37BF2BBD 000064 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: FACP 0x37BE4000 0000F4 (v03 LENOVO TP-6J 00001430 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x37BE5000 00A14B (v02 LENOVO TP-6J 00001430 INTL 20050624)
[ 0.000000] ACPI: FACS 0x37B9EFC0 000040
[ 0.000000] ACPI: HPET 0x37BFCEFC 000038 (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x37BFCF34 00003C (v01 LENOVO TP-6J 00001430 LOHR 0000005A)
[ 0.000000] ACPI: APIC 0x37BFCF70 000068 (v01 LENOVO TP-6J 00001430 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x37BFCFD8 000028 (v01 LENOVO TP-6J 00001430 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x37BE3000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE2000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x37BE1000 00020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377ba000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0179f000, 0x0179ffff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x37bfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x376b0fff]
[ 0.000000] node 0: [mem 0x376b7000-0x377b9fff]
[ 0.000000] node 0: [mem 0x3780f000-0x37907fff]
[ 0.000000] node 0: [mem 0x37b0f000-0x37b17fff]
[ 0.000000] node 0: [mem 0x37b1f000-0x37b62fff]
[ 0.000000] node 0: [mem 0x37b9f000-0x37bdffff]
[ 0.000000] node 0: [mem 0x37bfd000-0x37bfffff]
[ 0.000000] On node 0 totalpages: 227548
[ 0.000000] free_area_init_node: node 0, pgdat c1601e00, node_mem_map f6fb9020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223156 pages, LIFO batch:31
[ 0.000000] HighMem zone: 9 pages used for memmap
[ 0.000000] HighMem zone: 394 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0x38000000-0x3fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x376b1000-0x376b6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x377ba000-0x3780efff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7798000 s33856 r0 d23488 u57344
[ 0.000000] pcpu-alloc: s33856 r0 d23488 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 225772
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3bfa8024-2f62-4818-9393-5874bfc69f25 rw
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 1826808 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00037c00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 889132K/910192K available (4447K kernel code, 481K rwdata, 1288K rodata, 564K init, 956K bss, 21060K reserved, 1576K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1616000 - 0xc16a3000 ( 564 kB)
.data : 0xc14582aa - 0xc1614400 (1776 kB)
.text : 0xc1000000 - 0xc14582aa (4448 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.872 MHz processor
[ 0.003345] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.31 BogoMIPS (lpj=6982906)
[ 0.003348] pid_max: default: 32768 minimum: 301
[ 0.003355] ACPI: Core revision 20140214
[ 0.019690] ACPI: All ACPI Tables successfully acquired
[ 0.020050] Security Framework initialized
[ 0.020059] Yama: becoming mindful.
[ 0.020075] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020078] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020299] Initializing cgroup subsys memory
[ 0.020305] Initializing cgroup subsys devices
[ 0.020307] Initializing cgroup subsys freezer
[ 0.020309] Initializing cgroup subsys net_cls
[ 0.020313] Initializing cgroup subsys blkio
[ 0.020338] CPU: Physical Processor ID: 0
[ 0.020339] CPU: Processor Core ID: 0
[ 0.020342] mce: CPU supports 6 MCE banks
[ 0.020351] CPU0: Thermal monitoring enabled (TM1)
[ 0.020359] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.020459] Freeing SMP alternatives memory: 16K (c16a3000 - c16a7000)
[ 0.021230] ftrace: allocating 19105 entries in 38 pages
[ 0.026774] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.027205] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061993] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (fam: 06, model: 17, stepping: 0a)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076738] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083404] CPU 1 irqstacks, hard=f6516000 soft=f6518000
[ 0.083406] x86: Booting SMP configuration:
[ 0.083408] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.096574] x86: Booted up 1 node, 2 CPUs
[ 0.096579] smpboot: Total of 2 processors activated (8382.63 BogoMIPS)
[ 0.096809] devtmpfs: initialized
[ 0.096921] PM: Registering ACPI NVS region [mem 0x37b63000-0x37b9efff] (245760 bytes)
[ 0.097916] pinctrl core: initialized pinctrl subsystem
[ 0.097971] RTC time: 21:12:51, date: 07/24/14
[ 0.098030] NET: Registered protocol family 16
[ 0.098149] cpuidle: using governor ladder
[ 0.098151] cpuidle: using governor menu
[ 0.098199] ACPI: bus type PCI registered
[ 0.098202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.098297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.098300] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.098302] PCI: Using MMCONFIG for extended config space
[ 0.098303] PCI: Using configuration type 1 for base access
[ 0.098392] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.098393] mtrr: probably your BIOS does not setup all CPUs.
[ 0.098395] mtrr: corrected configuration.
[ 0.100073] ACPI: Added _OSI(Module Device)
[ 0.100073] ACPI: Added _OSI(Processor Device)
[ 0.100073] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100073] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.107026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.107995] ACPI: SSDT 0x37B18620 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.108621] ACPI: Dynamic OEM Table Load:
[ 0.108624] ACPI: SSDT 0x00000000 000549 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.116947] ACPI: SSDT 0x37B19F20 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.117393] ACPI: Dynamic OEM Table Load:
[ 0.117395] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.130189] ACPI: Interpreter enabled
[ 0.130202] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.130208] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.130226] ACPI: (supports S0 S3 S4 S5)
[ 0.130228] ACPI: Using IOAPIC for interrupt routing
[ 0.130267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.144307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.144315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.144322] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.145146] PCI host bridge to bus 0000:00
[ 0.145151] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145153] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.145156] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.145158] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.145161] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.145163] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.145166] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.145168] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
[ 0.145181] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.145206] DMAR: Forcing write-buffer flush capability
[ 0.145208] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.145311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.145327] pci 0000:00:02.0: reg 0x10: [mem 0xf2400000-0xf27fffff 64bit]
[ 0.145336] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145343] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.145462] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.145475] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.145642] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.145703] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.145829] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.145893] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.145953] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.146079] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.146141] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.146201] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.146201] pci 0000:00:1a.7: reg 0x10: [mem 0xf2a04000-0xf2a043ff]
[ 0.146201] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.146201] pci 0000:00:1b.0: reg 0x10: [mem 0xf2a00000-0xf2a03fff 64bit]
[ 0.146201] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.146201] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.146201] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.146201] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.146201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.146201] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.146201] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.146201] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.146266] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.146294] pci 0000:00:1d.7: reg 0x10: [mem 0xf2a04400-0xf2a047ff]
[ 0.146416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.146489] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.146551] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.146682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.146745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.146992] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018a
[ 0.147016] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.147028] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.147040] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.147053] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.147065] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.147077] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.147093] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.147095] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.147098] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.147100] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.147232] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.147255] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.147286] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.147516] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
[ 0.147544] pci 0000:02:00.0: reg 0x10: [mem 0xf2300000-0xf23000ff]
[ 0.147763] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147840] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
[ 0.147866] pci 0000:02:00.2: reg 0x10: [mem 0xf2300400-0xf23004ff]
[ 0.148142] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
[ 0.148168] pci 0000:02:00.3: reg 0x10: [mem 0xf2300800-0xf23008ff]
[ 0.148441] pci 0000:02:00.4: [197b:2384] type 00 class 0x088000
[ 0.148466] pci 0000:02:00.4: reg 0x10: [mem 0xf2300c00-0xf2300cff]
[ 0.156695] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.156703] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.156802] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.156907] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.157034] pci 0000:05:00.0: [10ec:8172] type 00 class 0x028000
[ 0.157059] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.157076] pci 0000:05:00.0: reg 0x14: [mem 0xf2200000-0xf2203fff]
[ 0.157243] pci 0000:05:00.0: supports D1 D2
[ 0.157245] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.157285] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.166686] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.166691] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.166697] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.166813] acpiphp: Slot [1] registered
[ 0.166820] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.166826] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.166831] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.166839] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167015] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[ 0.167081] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
[ 0.167195] pci 0000:08:00.0: reg 0x18: [mem 0xf2010000-0xf2010fff 64bit pref]
[ 0.167267] pci 0000:08:00.0: reg 0x20: [mem 0xf2000000-0xf200ffff 64bit pref]
[ 0.167309] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.167631] pci 0000:08:00.0: supports D1 D2
[ 0.167633] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.167765] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.167881] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.167886] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.167897] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.168016] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[ 0.168030] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168036] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168038] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.168041] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.168043] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.168045] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[ 0.168116] pci_bus 0000:00: on NUMA node 0
[ 0.168358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168428] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.168494] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168563] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168628] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.168695] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.168761] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.168827] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.173479] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173591] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173669] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173669] vgaarb: loaded
[ 0.173669] vgaarb: bridge control possible 0000:00:02.0
[ 0.173669] PCI: Using ACPI for IRQ routing
[ 0.185061] PCI: pci_cache_line_size set to 64 bytes
[ 0.185173] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.185176] e820: reserve RAM buffer [mem 0x376b1000-0x37ffffff]
[ 0.185179] e820: reserve RAM buffer [mem 0x377ba000-0x37ffffff]
[ 0.185182] e820: reserve RAM buffer [mem 0x37908000-0x37ffffff]
[ 0.185184] e820: reserve RAM buffer [mem 0x37b18000-0x37ffffff]
[ 0.185187] e820: reserve RAM buffer [mem 0x37b63000-0x37ffffff]
[ 0.185189] e820: reserve RAM buffer [mem 0x37be0000-0x37ffffff]
[ 0.185191] e820: reserve RAM buffer [mem 0x37c00000-0x37ffffff]
[ 0.185330] NetLabel: Initializing
[ 0.185332] NetLabel: domain hash size = 128
[ 0.185334] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.185348] NetLabel: unlabeled traffic allowed by default
[ 0.185378] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.185385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.185390] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186692] Switched to clocksource hpet
[ 0.194447] pnp: PnP ACPI init
[ 0.194476] ACPI: bus type PNP registered
[ 0.194565] pnp 00:00: [dma 4]
[ 0.194604] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.194647] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.194818] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.194823] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.194877] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.194964] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.194967] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.194970] system 00:04: [io 0xffff] has been reserved
[ 0.194972] system 00:04: [io 0xffff] has been reserved
[ 0.194975] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.194978] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.194981] system 00:04: [io 0x1600-0x16fe] has been reserved
[ 0.194983] system 00:04: [io 0xfe00] has been reserved
[ 0.194986] system 00:04: [io 0x0700-0x070f] has been reserved
[ 0.194990] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195039] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.195106] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.195153] pnp 00:07: Plug and Play ACPI device, IDs LEN0017 PNP0f13 (active)
[ 0.195390] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.195393] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.195396] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.195399] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.195402] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.195405] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.195407] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.195411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195901] pnp: PnP ACPI: found 9 devices
[ 0.195903] ACPI: bus type PNP unregistered
[ 0.233524] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.233530] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.233542] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.233546] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.233549] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.233561] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.233564] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.233567] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[ 0.233579] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.233599] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 08] add_size 400000
[ 0.233618] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233621] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233624] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233627] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.233630] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233632] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.233635] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.233638] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233641] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233643] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.233651] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233656] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.233660] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233664] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x407fffff]
[ 0.233668] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233672] pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233676] pci 0000:00:1c.5: BAR 14: assigned [mem 0x40c00000-0x410fffff]
[ 0.233680] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.233683] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.233687] pci 0000:00:1c.2: BAR 13: assigned [io 0x7000-0x7fff]
[ 0.233691] pci 0000:00:1f.3: BAR 0: assigned [mem 0x41100000-0x411000ff 64bit]
[ 0.233705] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.233709] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.233716] pci 0000:00:1c.0: bridge window [mem 0xf2300000-0xf23fffff]
[ 0.233721] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233729] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.233732] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.233739] pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
[ 0.233744] pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233752] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.233756] pci 0000:00:1c.2: bridge window [io 0x7000-0x7fff]
[ 0.233763] pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff]
[ 0.233768] pci 0000:00:1c.2: bridge window [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233776] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.233779] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233786] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.233791] pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233799] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.233803] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.233809] pci 0000:00:1c.4: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.233814] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233823] pci 0000:08:00.0: BAR 6: assigned [mem 0xf2020000-0xf203ffff pref]
[ 0.233826] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 0.233830] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 0.233836] pci 0000:00:1c.5: bridge window [mem 0x40c00000-0x410fffff]
[ 0.233841] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233849] pci 0000:00:1e.0: PCI bridge to [bus 09]
[ 0.233864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.233867] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.233870] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233872] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233874] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233877] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233879] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233882] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.233884] pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
[ 0.233887] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.233890] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.233892] pci_bus 0000:03: resource 1 [mem 0x40200000-0x403fffff]
[ 0.233895] pci_bus 0000:03: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.233897] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff]
[ 0.233900] pci_bus 0000:04: resource 1 [mem 0x40600000-0x407fffff]
[ 0.233902] pci_bus 0000:04: resource 2 [mem 0x40800000-0x409fffff 64bit pref]
[ 0.233905] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.233907] pci_bus 0000:05: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.233910] pci_bus 0000:05: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
[ 0.233912] pci_bus 0000:06: resource 0 [io 0x3000-0x3fff]
[ 0.233915] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.233917] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.233920] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.233922] pci_bus 0000:08: resource 1 [mem 0x40c00000-0x410fffff]
[ 0.233924] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.233927] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.233929] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.233932] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.233934] pci_bus 0000:09: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.233937] pci_bus 0000:09: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.233939] pci_bus 0000:09: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.233941] pci_bus 0000:09: resource 10 [mem 0x40000000-0xfebfffff]
[ 0.233974] NET: Registered protocol family 2
[ 0.234147] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.234165] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.234196] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.234229] TCP: reno registered
[ 0.234232] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234241] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.234288] NET: Registered protocol family 1
[ 0.234306] pci 0000:00:02.0: Boot video device
[ 0.247385] PCI: CLS 64 bytes, default 64
[ 0.247444] Unpacking initramfs...
[ 0.327321] Freeing initrd memory: 3316K (f6ac0000 - f6dfd000)
[ 0.327360] Simple Boot Flag at 0x36 set to 0x1
[ 0.327537] apm: BIOS not found.
[ 0.327589] Scanning for low memory corruption every 60 seconds
[ 0.328006] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342512] bounce pool size: 64 pages
[ 0.342526] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344771] zbud: loaded
[ 0.344889] VFS: Disk quotas dquot_6.5.2
[ 0.344943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345132] msgmni has been set to 1740
[ 0.345203] Key type big_key registered
[ 0.345390] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.345431] io scheduler noop registered
[ 0.345433] io scheduler deadline registered
[ 0.345477] io scheduler cfq registered (default)
[ 0.345722] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.345914] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.346095] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.346276] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.346459] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.346643] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.346801] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.346826] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.346866] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.346868] vesafb: scrolling: redraw
[ 0.346870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.347265] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.371347] Console: switching to colour frame buffer device 128x48
[ 0.395282] fb0: VESA VGA frame buffer device
[ 0.395302] intel_idle: does not run on family 6 model 23
[ 0.395336] GHES: HEST is not enabled!
[ 0.395353] isapnp: Scanning for PnP cards...
[ 0.708652] isapnp: No Plug & Play device found
[ 0.708714] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.709479] rtc_cmos 00:05: RTC can wake from S4
[ 0.709659] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.709696] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.709734] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.709873] TCP: cubic registered
[ 0.710038] NET: Registered protocol family 10
[ 0.710291] NET: Registered protocol family 17
[ 0.710470] Using IPI No-Shortcut mode
[ 0.710614] registered taskstats version 1
[ 0.711361] Magic number: 6:207:248
[ 0.711441] rtc_cmos 00:05: setting system clock to 2014-07-24 21:12:51 UTC (1406236371)
[ 0.711573] PM: Hibernation image not present or could not be loaded.
[ 0.711816] Freeing unused kernel memory: 564K (c1616000 - c16a3000)
[ 0.711835] Write protecting the kernel text: 4452k
[ 0.711865] Write protecting the kernel read-only data: 1292k
[ 0.720349] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.722097] systemd-udevd[47]: starting version 215
[ 0.747046] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.754102] ACPI: bus type USB registered
[ 0.754142] usbcore: registered new interface driver usbfs
[ 0.754158] usbcore: registered new interface driver hub
[ 0.757660] usbcore: registered new device driver usb
[ 0.757853] sdhci: Secure Digital Host Controller Interface driver
[ 0.757856] sdhci: Copyright(c) Pierre Ossman
[ 0.758255] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 20)
[ 0.758310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.758388] mmc0: no vqmmc regulator found
[ 0.758390] mmc0: no vmmc regulator found
[ 0.758524] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.758563] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 20)
[ 0.758628] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
[ 0.758728] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.758864] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.758874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.758884] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.758909] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.759248] ehci-pci: EHCI PCI platform driver
[ 0.760108] hub 1-0:1.0: USB hub found
[ 0.760122] hub 1-0:1.0: 2 ports detected
[ 0.760528] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.760536] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.760554] ehci-pci 0000:00:1a.7: debug port 1
[ 0.760989] i8042: Detected active multiplexing controller, rev 1.1
[ 0.764322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.764375] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.764416] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.764455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.764469] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.764487] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2a04000
[ 0.764496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769729] SCSI subsystem initialized
[ 0.771540] libata version 3.00 loaded.
[ 0.773372] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.773646] hub 2-0:1.0: USB hub found
[ 0.773657] hub 2-0:1.0: 6 ports detected
[ 0.796797] hub 1-0:1.0: USB hub found
[ 0.796811] hub 1-0:1.0: 2 ports detected
[ 0.797077] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.797086] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 0.797104] ehci-pci 0000:00:1d.7: debug port 1
[ 0.801001] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.801026] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2a04400
[ 0.810017] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.810266] hub 3-0:1.0: USB hub found
[ 0.810277] hub 3-0:1.0: 6 ports detected
[ 0.810637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.810645] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.810654] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.810690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 0.810912] hub 4-0:1.0: USB hub found
[ 0.810922] hub 4-0:1.0: 2 ports detected
[ 0.811160] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.811169] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.811178] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.811202] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 0.811580] hub 5-0:1.0: USB hub found
[ 0.811590] hub 5-0:1.0: 2 ports detected
[ 0.811840] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.811847] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.811857] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.811879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 0.812130] hub 6-0:1.0: USB hub found
[ 0.812140] hub 6-0:1.0: 2 ports detected
[ 0.812412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.812422] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.812431] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.812458] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 0.812718] hub 7-0:1.0: USB hub found
[ 0.812728] hub 7-0:1.0: 2 ports detected
[ 0.813015] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.813023] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.813033] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.813072] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.813371] hub 8-0:1.0: USB hub found
[ 0.813381] hub 8-0:1.0: 2 ports detected
[ 0.813569] ata_piix 0000:00:1f.2: version 2.13
[ 0.813680] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.816969] scsi0 : ata_piix
[ 0.817145] scsi1 : ata_piix
[ 0.817232] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
[ 0.817238] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
[ 0.842971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.116709] usb 3-6: new high-speed USB device number 2 using ehci-pci
[ 1.290069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.290196] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.297007] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0A, SB31, max UDMA/100
[ 1.297157] ata1.00: ATA-8: WDC WD2500BEVT-08A23T1, 02.01A02, max UDMA/133
[ 1.297160] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.310274] ata2.00: configured for UDMA/100
[ 1.310518] ata1.00: configured for UDMA/133
[ 1.310653] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 02.0 PQ: 0 ANSI: 5
[ 1.314042] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A0A SB31 PQ: 0 ANSI: 5
[ 1.330035] tsc: Refined TSC clocksource calibration: 2094.749 MHz
[ 1.330632] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.330736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.330740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.330778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.339509] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.339512] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.339697] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.410766] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.411402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.330087] Switched to clocksource tsc
[ 2.977672] random: nonblocking pool is initialized
[ 4.813882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.660514] systemd[1]: systemd 215 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 5.660690] systemd[1]: Detected architecture 'x86'.
[ 5.713519] systemd[1]: Set hostname to <Thinkpad-SL510>.
[ 7.304701] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.304780] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.304796] systemd[1]: Starting Remote File Systems.
[ 7.305131] systemd[1]: Reached target Remote File Systems.
[ 7.305165] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.305725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.305745] systemd[1]: Starting Encrypted Volumes.
[ 7.306028] systemd[1]: Reached target Encrypted Volumes.
[ 7.306050] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.306094] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.306107] systemd[1]: Starting Paths.
[ 7.306343] systemd[1]: Reached target Paths.
[ 7.306360] systemd[1]: Expecting device dev-disk-by\x2duuid-0da676d3\x2de00d\x2d4408\x2da0e4\x2d61af4ccfed22.device...
[ 7.306889] systemd[1]: Expecting device dev-disk-by\x2duuid-37e41bc7\x2daf4c\x2d4c7f\x2d97ff\x2decc785cc6263.device...
[ 7.307389] systemd[1]: Expecting device dev-disk-by\x2duuid-6692aca0\x2d5948\x2d4835\x2dadb5\x2d51941a76128f.device...
[ 7.307887] systemd[1]: Expecting device dev-disk-by\x2duuid-8829a0cf\x2da620\x2d438d\x2d8d1a\x2de386af97280f.device...
[ 7.308384] systemd[1]: Starting Root Slice.
[ 7.315232] systemd[1]: Created slice Root Slice.
[ 7.315253] systemd[1]: Starting User and Session Slice.
[ 7.315767] systemd[1]: Created slice User and Session Slice.
[ 7.315784] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.316114] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.316130] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.316519] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.316536] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.316926] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.316943] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.317282] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.317297] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.317631] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.317651] systemd[1]: Starting udev Kernel Socket.
[ 7.317945] systemd[1]: Listening on udev Kernel Socket.
[ 7.317963] systemd[1]: Starting udev Control Socket.
[ 7.318263] systemd[1]: Listening on udev Control Socket.
[ 7.318284] systemd[1]: Starting Journal Socket.
[ 7.318577] systemd[1]: Listening on Journal Socket.
[ 7.318611] systemd[1]: Starting System Slice.
[ 7.319093] systemd[1]: Created slice System Slice.
[ 7.319121] systemd[1]: Started File System Check on Root Device.
[ 7.319134] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 7.319690] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.346175] systemd[1]: Mounting Temporary Directory...
[ 7.355475] systemd[1]: Starting system-getty.slice.
[ 7.356130] systemd[1]: Created slice system-getty.slice.
[ 7.405020] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.405060] systemd[1]: Starting Setup Virtual Console...
[ 7.434270] systemd[1]: Starting Load Kernel Modules...
[ 7.435152] systemd[1]: Mounting Huge Pages File System...
[ 7.450675] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.451757] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.452682] systemd[1]: Mounting Debug File System...
[ 7.453572] systemd[1]: Starting udev Coldplug all Devices...
[ 7.454542] systemd[1]: Starting Journal Service...
[ 7.455770] systemd[1]: Started Journal Service.
[ 8.017658] vboxdrv: Found 2 processor cores.
[ 8.017849] vboxdrv: fAsync=0 offMin=0x19a offMax=0x113a
[ 8.017936] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.017938] vboxdrv: Successfully loaded version 4.3.12_OSE (interface 0x001a0007).
[ 8.066565] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.453787] systemd-udevd[137]: starting version 215
[ 9.297221] Monitor-Mwait will be used to enter C-1 state
[ 9.297230] Monitor-Mwait will be used to enter C-2 state
[ 9.297235] tsc: Marking TSC unstable due to TSC halts in idle
[ 9.297251] ACPI: acpi_idle registered with cpuidle
[ 9.297798] Switched to clocksource hpet
[ 9.397577] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 9.398331] ACPI: Lid Switch [LID]
[ 9.398442] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 9.398448] ACPI: Power Button [PWRB]
[ 9.398520] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 9.398523] ACPI: Sleep Button [SLPB]
[ 9.398594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 9.398597] ACPI: Power Button [PWRF]
[ 9.714253] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.714258] ACPI: Thermal Zone [TZ00] (38 C)
[ 9.788226] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.107244] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.107258] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 10.107608] r8169 0000:08:00.0: irq 46 for MSI/MSI-X
[ 10.107894] r8169 0000:08:00.0 eth0: RTL8102e at 0xf8e0e000, 60:eb:69:df:fc:5b, XID 04c00000 IRQ 46
[ 10.138235] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 10.151012] Linux agpgart interface v0.103
[ 10.156788] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.156794] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.156797] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 10.156799] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.156801] sound hdaudioC0D0: inputs:
[ 10.156804] sound hdaudioC0D0: Mic=0x18
[ 10.156807] sound hdaudioC0D0: Internal Mic=0x12
[ 10.187737] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140214/utaddress-258)
[ 10.187746] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187751] ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187757] ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\GPIO) (20140214/utaddress-258)
[ 10.187760] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.187762] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.200980] ACPI: Battery Slot [BAT1] (battery present)
[ 10.307840] [drm] Initialized drm 1.1.0 20060810
[ 10.331834] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 10.332165] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.332219] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 10.332274] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 10.346048] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 10.346167] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.346796] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 10.346977] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.403254] ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 10.403262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.407145] ACPI: AC Adapter [ACAD] (on-line)
[ 10.407653] wmi: Mapper loaded
[ 10.462739] Non-volatile memory driver v1.3
[ 10.483086] cfg80211: Calling CRDA to update world regulatory domain
[ 10.511461] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 10.511465] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 10.511467] thinkpad_acpi: ThinkPad BIOS 6JET85WW (1.43 ), EC 6JHT66WW-1.186000
[ 10.511469] thinkpad_acpi: Lenovo ThinkPad SL510, model 2847A65
[ 10.513121] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 10.517198] thinkpad_acpi: radio switch found; radios are enabled
[ 10.517210] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 10.517319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 10.517321] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 10.518287] thinkpad_acpi: asked for hotkey mask 0x078c7fff, but firmware forced it to 0x008c7fff
[ 10.617843] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 10.617954] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 10.640485] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input17
[ 10.717742] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[ 10.928161] media: Linux media interface: v0.10
[ 11.006082] iTCO_vendor_support: vendor-support=0
[ 11.008425] Linux video capture interface: v2.00
[ 11.015257] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.015302] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 11.015485] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.050172] systemd-udevd[146]: renamed network interface eth0 to enp8s0
[ 11.084784] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[ 11.084877] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 11.401469] [drm] Memory usable by graphics device = 2048M
[ 11.401476] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 11.401478] fb: switching to inteldrmfb from VESA VGA
[ 11.401504] Console: switching to colour dummy device 80x25
[ 11.423441] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 11.423454] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.423456] [drm] Driver supports precise vblank timestamp query.
[ 11.423531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.474103] rtl8192se: FW Power Save off (module option)
[ 11.474191] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
Loading firmware rtlwifi/rtl8192sefw.bin
[ 11.539577] fbcon: inteldrmfb (fb0) is primary device
[ 11.568063] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[ 11.568068] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 11.625453] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input16
[ 11.649292] mousedev: PS/2 mouse device common for all mice
[ 11.819295] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:481c)
[ 11.832647] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.7/usb3/3-6/3-6:1.0/input/input19
[ 11.832785] usbcore: registered new interface driver uvcvideo
[ 11.832786] USB Video Class driver (1.1.1)
[ 11.900636] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 11.912613] systemd-udevd[144]: renamed network interface wlan0 to wlp5s0
[ 12.173403] Console: switching to colour frame buffer device 170x48
[ 12.178613] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.178615] i915 0000:00:02.0: registered panic notifier
[ 12.191803] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.193501] acpi device:06: registered as cooling_device2
[ 12.193604] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[ 12.193997] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.246859] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 13.644561] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.954050] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.071585] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.166537] systemd-journald[114]: Received request to flush runtime journal from PID 1
[ 16.054096] psmouse serio5: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 16.358428] psmouse serio5: hgpk: ID: 10 00 64
[ 18.270058] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.588710] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input18
[ 20.986088] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 20.997921] r8169 0000:08:00.0 enp8s0: link down
[ 20.997967] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[ 23.204726] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.231917] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.233796] wlp5s0: authenticated
[ 23.237347] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.241118] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.242837] wlp5s0: associated
[ 23.242852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 23.407416] wlp5s0: deauthenticating from 8c:21:0a:77:4c:32 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 23.443391] cfg80211: Calling CRDA for country: US
[ 23.443467] wlp5s0: authenticate with 8c:21:0a:77:4c:32
[ 23.463399] wlp5s0: send auth to 8c:21:0a:77:4c:32 (try 1/3)
[ 23.465298] wlp5s0: authenticated
[ 23.466930] wlp5s0: associate with 8c:21:0a:77:4c:32 (try 1/3)
[ 23.471099] wlp5s0: RX AssocResp from 8c:21:0a:77:4c:32 (capab=0x431 status=0 aid=3)
[ 23.472786] wlp5s0: associated
[ 391.317544] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 495.430421] perf interrupt took too long (2517 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 526.290766] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 646.953268] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
[ 767.198414] [drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
Last edited by jazzi (2014-07-31 12:22:09)jazzi wrote:Sometimes the computer will freeze when booting into start virtual console.
Gotta to use the power button to shut down, normally it will boot successfully followingby.
Before is ok, can't remember when this problem show up.
Don't know where to go, please give me a hint.
You have to give us a hint.
What is your processor?
How much RAM have you?
What is your video card/ship set?
What kernel are you running?
I spotted this in your dump:
[drm] HPD interrupt storm detected on connector DP-2: switching from hotplug detection to polling
In this case, drm means Direct Rendering Management and has to do with your Video subsystem. An interrupt is where the hardware sends a signal to the processor that something has happened that requires the urgent attention of the processor. The kernel is protesting that the hardware is barraging it with interrupt requests. -
[T440p] TrackPoint buttons not working
Hi,
I have a weird problem with my T440p's TrackPoint (running Windows 7 Pro, x86) using out-of-the-box settings. Basically, it seems that its buttons do not work at all - the designated upper regions of the TouchPad (which should supposedly function as TrackPoint dedicated buttons) produce no effect upon clicking. Also, if I disable the TouchPad in the Mouse control panel module (ThinkPad tab), I can no longer click anything and have to resort to keyboard navigation to restore mouse functionality.
What is interesting is that this is the second T440p unit I have tried to use the TrackPoint on and failed. The first one was also running Windows 7, but had a different screen (HD+, while the current one is Full HD) and CPU (2-core i5 vs. current 4-core i7).
How do I use the TrackPoint buttons, again? Cause it's obvious by now that it does not work the same way as on my trusty X220 machine...
Solved!
Go to Solution.FOLLOW UP;
when ultranav driver is installed then i do not seem to have issues with the trackpoint movements, until I start clicking buttons. For example this is a standard event. I am in window , like in a multipage word document, and i want to scroll down using the slider on the left frame of the window. If I do it by keeping the button pressed and moving the trackpoint - all works fine; but if I want to do it by simply multiple clicks at the bottom part of that slider part of windoe frame (left frame) then after 3 clicks (always ) the track point and buttns freeze forever, or sometimg can be unfreezed by external mouse movements, or by quikcly moving my hand over the touchpad...
As if quick succession of button clicks created the problem
When no ultranav driver is installed (and touch pad disabled in BIOS) then occasionally the button do not work and in general harder clicks are needed, and occasionally succesion of clicks also freezes the track point and buttons...some time can be "woken up" by external mouse movements and sometimes not.
thanks for any help or pointing to a place on www where I can find solution..
by the way anybody heard of physically putting the old trakcpoint system (like e.g. in T60) to t440. ??? -
G500s freezes while working and even when no program is running
my lenovo g500s laptop is 13 months old and is out of warranty. it freezes frequently with no specific reason and it stuck for very long time so i have to restart it everytime it gets freeze. it is very irritating to restart it again and again so pls resolve my issue as soon as possible.
There are no heating problems ,no malware detected during scan but on running hardware scan on lenovo solution centre it detect 3 failures in storage devices, except this i don't find any other problem in my laptop.
Link to image
Moderator comment: Image(s) converted to link(s). For helpful information, please see: About Posting Pictures In The Forums.Good day and welcome to the community.
From your screenshot, it appears that your hard drive is failing. Best advice is to back up all of your personal files (docs, music, pictures, etc) immediately and replace the drive.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Firefox causing machine to hang/freeze
I've been having this problem for a while and haven't had time to investigate. Googling and looking at logs have not helped. The machine is a Thinkpad T42. At some point in my browsing, the entire machine freezes; I can't even get in with ssh. It seems that one time (maybe more) it borked the Firefox profiles and I had to start over. I thought it was always with firefox, but as I typed this the first time in chromium, it happened. I did a memtest86, just the basic one, and everything passed. Here's my lspci:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
I don't know what else would be helpful to post, so let me know what would be good if you are interested in helping.
Here is the end of /var/log/messages.log from the last time it happened:
Nov 17 20:06:01 miles kernel: EXT3 FS on sda3, internal journal
Nov 17 20:06:01 miles kernel: kjournald starting. Commit interval 5 seconds
Nov 17 20:06:01 miles kernel: EXT3 FS on sda4, internal journal
Nov 17 20:06:01 miles kernel: EXT3-fs: mounted filesystem with writeback data mode.
Nov 17 20:06:01 miles kernel: Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
Nov 17 20:06:01 miles kernel: IBM TrackPoint firmware: 0x0e, buttons: 3/3
Nov 17 20:06:01 miles kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Nov 17 20:06:01 miles acpid: starting up
Nov 17 20:06:01 miles acpid: 1 rule loaded
Nov 17 20:06:01 miles acpid: waiting for events: event logging is off
Nov 17 20:06:03 miles acpid: client connected from 1526[82:82]
Nov 17 20:06:03 miles acpid: 1 client rule loaded
Nov 17 20:05:54 miles firmware.sh[1087]: udev firmware loader misses sysfs directory
Nov 17 20:06:00 miles init: Entering runlevel: 3
Nov 17 20:06:05 miles kernel: e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Nov 17 20:06:11 miles ntpd[1608]: ntpd [email protected] Fri Jun 19 20:21:56 UTC 2009 (1)
Nov 17 20:06:11 miles ntpd[1620]: precision = 1.000 usec
Nov 17 20:06:11 miles kernel: NET: Registered protocol family 10
Nov 17 20:06:11 miles kernel: lo: Disabled Privacy Extensions
Nov 17 20:06:11 miles ntpd[1620]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Nov 17 20:06:11 miles ntpd[1620]: Listening on interface #1 wildcard, ::#123 Disabled
Nov 17 20:06:11 miles ntpd[1620]: Listening on interface #2 lo, ::1#123 Enabled
Nov 17 20:06:11 miles ntpd[1620]: failed to initialize interface for address fe80::20d:60ff:fed0:20ed
Nov 17 20:06:11 miles ntpd[1620]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Nov 17 20:06:11 miles ntpd[1620]: Listening on interface #5 eth0, 192.168.1.46#123 Enabled
Nov 17 20:06:11 miles ntpd[1620]: kernel time sync status 2040
Nov 17 20:06:12 miles ntpd[1620]: frequency initialized 8.661 PPM from /var/lib/ntp/ntp.drift
Nov 17 20:06:12 miles ntpd[1620]: failed to initialize interface for address fe80::20d:60ff:fed0:20ed
Nov 17 20:06:25 miles acpid: client connected from 1693[0:1000]
Nov 17 20:06:25 miles acpid: 1 client rule loaded
Nov 17 20:06:26 miles kernel: Unpin not necessary for f6a24c00 !
Nov 17 20:10:29 miles ntpd[1620]: synchronized to 67.59.168.233, stratum 3
Nov 17 20:10:31 miles ntpd[1620]: time reset +1.409519 s
Nov 17 20:10:31 miles ntpd[1620]: kernel time sync status change 2001
Nov 17 20:11:14 miles ntpd[1620]: Listening on interface #7 eth0, fe80::20d:60ff:fed0:20ed#123 Enabled
Nov 17 20:19:28 miles ntpd[1620]: synchronized to 67.59.168.233, stratum 3
I don't know what else might be useful.Heh, I also have a ThinkPad T42 and this very same problem, freezes so hard even a "Magic SysRq Key" G or REISUB has no effect, have to hold the power button to just kill power without a proper shudown. One time the mouse cursor remained movable, but every other time that froze in place as well. I've also noticed the cooling fan kicks into high gear and never winds down until I give up and kill the power.
I'd be glad to provide any log files requested here for comparison, meanwhile here's the post-boot section of my /var/log/messages.log for the last uptime session until it froze:
Dec 18 13:44:08 hadit ntpd[1945]: adjusting local clock by -0.742488s
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: *** info [daemon/processrequest.c(42)]:
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: Request on 6 (console 2)
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: *** info [daemon/disable_paste.c(28)]:
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: disabling pasting per request from virtual console (2)
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: *** info [daemon/processrequest.c(42)]:
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: Request on 6 (console 2)
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: *** info [daemon/processrequest.c(42)]:
Dec 18 13:46:19 hadit /usr/sbin/gpm[1639]: Request on 6 (console 2)
Dec 18 13:46:48 hadit ntpd[1945]: adjusting local clock by -0.686540s
Dec 18 13:47:20 hadit ntpd[1945]: adjusting local clock by -0.580072s
Dec 18 13:49:03 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:49:03 hadit acpid: client connected from 1949[0:0]
Dec 18 13:49:03 hadit acpid: 1 client rule loaded
Dec 18 13:49:40 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:49:40 hadit acpid: client connected from 1949[0:0]
Dec 18 13:49:40 hadit acpid: 1 client rule loaded
Dec 18 13:51:13 hadit ntpd[1945]: adjusting local clock by -0.541651s
Dec 18 13:53:52 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:53:52 hadit acpid: client connected from 1949[0:0]
Dec 18 13:53:52 hadit acpid: 1 client rule loaded
Dec 18 13:54:55 hadit ntpd[1945]: adjusting local clock by -0.403649s
Dec 18 13:55:56 hadit init: Trying to re-exec init
Dec 18 13:56:05 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:56:05 hadit acpid: client connected from 1949[0:0]
Dec 18 13:56:05 hadit acpid: 1 client rule loaded
Dec 18 13:56:38 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:56:38 hadit acpid: client connected from 1949[0:0]
Dec 18 13:56:38 hadit acpid: 1 client rule loaded
Dec 18 13:56:56 hadit kernel: Unpin not necessary for f65b3f00 !
Dec 18 13:56:57 hadit acpid: client 1949[0:0] has disconnected
Dec 18 13:56:57 hadit acpid: client connected from 2275[0:0]
Dec 18 13:56:57 hadit acpid: 1 client rule loaded
Dec 18 13:58:05 hadit ntpd[1945]: adjusting local clock by -0.258933s
Dec 18 14:01:48 hadit ntpd[1945]: adjusting local clock by -0.150768s
Dec 18 14:10:03 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:10:03 hadit acpid: client connected from 2275[0:0]
Dec 18 14:10:03 hadit acpid: 1 client rule loaded
Dec 18 14:10:29 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:10:29 hadit acpid: client connected from 2275[0:0]
Dec 18 14:10:29 hadit acpid: 1 client rule loaded
Dec 18 14:11:36 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:11:36 hadit acpid: client connected from 2275[0:0]
Dec 18 14:11:36 hadit acpid: 1 client rule loaded
Dec 18 14:23:39 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:23:39 hadit acpid: client connected from 2275[0:0]
Dec 18 14:23:39 hadit acpid: 1 client rule loaded
Dec 18 14:24:05 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:24:05 hadit acpid: client connected from 2275[0:0]
Dec 18 14:24:05 hadit acpid: 1 client rule loaded
Dec 18 14:29:51 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:29:51 hadit acpid: client connected from 2275[0:0]
Dec 18 14:29:51 hadit acpid: 1 client rule loaded
Dec 18 14:30:07 hadit kernel: Unpin not necessary for f60cbb00 !
Dec 18 14:30:08 hadit acpid: client 2275[0:0] has disconnected
Dec 18 14:30:08 hadit acpid: client connected from 2569[0:0]
Dec 18 14:30:08 hadit acpid: 1 client rule loaded
Dec 18 14:34:35 hadit acpid: client 2569[0:0] has disconnected
Dec 18 14:34:35 hadit acpid: client connected from 2569[0:0]
Dec 18 14:34:35 hadit acpid: 1 client rule loaded
Dec 18 14:36:48 hadit acpid: client 2569[0:0] has disconnected
Dec 18 14:36:48 hadit acpid: client connected from 2569[0:0]
Dec 18 14:36:48 hadit acpid: 1 client rule loaded
Dec 18 14:37:02 hadit acpid: client 2569[0:0] has disconnected
Dec 18 14:37:02 hadit acpid: client connected from 2569[0:0]
Dec 18 14:37:02 hadit acpid: 1 client rule loaded
Dec 18 14:38:16 hadit acpid: client 2569[0:0] has disconnected
Dec 18 14:38:16 hadit acpid: client connected from 2569[0:0]
Dec 18 14:38:16 hadit acpid: 1 client rule loaded
Dec 18 14:58:16 hadit -- MARK --
Dec 18 15:18:16 hadit -- MARK --
Dec 18 15:38:16 hadit -- MARK --
Last edited by SubGothius (2009-12-19 07:40:59) -
W520 Win 8.1 - Would freeze up off dock
TIme fly's when you are having fun. I love my two year old W520:
Intel Core i7-2760QM
2 Samsung 520 256g SSD in Raid 0
1 Samsung 530 1t SSD msata
I took up MS with their $30 Win 8 upgrade, and subsequent 8.1. I do miss the power management utility that Win 7 had, but I'm good with the Win 8.1 thing ( except for that **bleep** kb2919355 that log jammed my windows update for a few weeks, but was able to get it to update).
Everything worked great at my dock, but when I removed it, to use it on my lap (it is a laptop, right?), It would freeze up. The pointer pad would not respond, and the trak pointer would still be able to point, but clicking on things would give me no response. Powercycle was the only way back.
I dreaded a reload from scratch ordeal, and I was stumped, after searching online. What in the world was the issue?
I tried turning on and off peripherals, and suspected my intel video driver. No luck.
In the course of troubleshooting, I pulled the W520 off the dock, and placed it on my desk. It worked fine. I then picked up the laptop and placed it on my lap. Crash and burn. What the hell? Is there something loose in the unit?
Poke and hope, and then I saw the icon on the control panel for “Lenono – Airbag Protection”, I saw that it was enabled with the highest setting for Shock Detection Sensitivity….
I disabled it, and guess what?
I now have a laptop that can be used as a laptop, and I didn’t have to try a dreadful OS / system reload!
I hope this story may help somebody out there!Yup, SSD's don't need the Airbag Protection app like the older HD's. That was the first thing I uninstalled when I upgraded my W520 to SSD.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB -
[Solved] System freeze, no apparent reason found in logs
I've been getting some freezes over the past weeks or months. It happened before and after the systemd switch and I couldn't find anything in the logs. Here's some information:
Display Manager: SLiM
Window Manager: Awesome WM
During a freeze:
I can't switch to a tty.
Suspend via sleep button or lid close doesn't work (using acpid).
I have to hard reset my laptop.
$ uname -a
Linux diiis-tp 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64 GNU/Linux
$ cat /var/log/Xorg.0.log | grep EE
[ 18.289] Current Operating System: Linux diiis-tp 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.117] Initializing built-in extension MIT-SCREEN-SAVER
[ 19.780] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 19.780] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 19.781] (EE) Failed to load module "fbdev" (module does not exist, 0)
(Last messages in /var/log/everything.log before the latest freeze)
Nov 25 18:21:36 localhost slim[470]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 25 18:21:46 localhost slim[470]: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Nov 25 18:37:07 localhost udisks-daemon[2357]: **** Refreshing ATA SMART data for /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda
Nov 25 18:37:07 localhost udisks-daemon[2357]: helper(pid 9910): launched job udisks-helper-ata-smart-collect on /dev/sda
Nov 25 18:37:07 localhost udisks-daemon[2357]: helper(pid 9910): completed with exit code 0
Nov 25 18:37:07 localhost udisks-daemon[2357]: **** EMITTING CHANGED for sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda
Any ideas?
Last edited by diiis (2012-12-08 22:42:36)Which of these modules could I try blacklisting?
$ lsmod
Module Size Used by
ip6t_REJECT 2796 1
xt_hl 1369 6
ip6t_rt 2080 3
nf_conntrack_ipv6 7511 7
nf_defrag_ipv6 6273 1 nf_conntrack_ipv6
ablk_helper 1972 0
aes_x86_64 7508 1
aes_generic 26138 1 aes_x86_64
ipt_REJECT 2281 1
xt_LOG 12054 10
xt_limit 1977 13
xt_tcpudp 2471 18
xt_addrtype 2853 4
xt_conntrack 3297 14
ip6table_filter 1396 1
ip6_tables 18518 2 ip6table_filter,ip6t_rt
nf_conntrack_netbios_ns 1109 0
nf_conntrack_broadcast 1285 1 nf_conntrack_netbios_ns
nf_nat_ftp 1636 0
nf_nat 15370 1 nf_nat_ftp
nf_conntrack_ipv4 7798 9 nf_nat
nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
nf_conntrack_ftp 6613 1 nf_nat_ftp
nf_conntrack 64100 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6
iptable_filter 1456 1
ip_tables 16946 1 iptable_filter
x_tables 16954 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT
btusb 12372 0
bluetooth 192120 1 btusb
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
snd_hda_codec_hdmi 24487 1
snd_hda_codec_conexant 47158 1
arc4 2039 2
iwldvm 170908 0
joydev 9991 0
mac80211 426332 1 iwldvm
iTCO_wdt 5255 0
coretemp 6070 0
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
kvm_intel 124749 0
i915 495521 2
intel_agp 10744 1 i915
intel_gtt 15659 2 i915,intel_agp
ac 2536 0
drm_kms_helper 32877 1 i915
drm 218852 3 i915,drm_kms_helper
iTCO_vendor_support 1929 1 iTCO_wdt
iwlwifi 125181 1 iwldvm
cfg80211 177108 3 iwlwifi,mac80211,iwldvm
lpc_ich 10609 0
snd_hwdep 6428 1 snd_hda_codec
snd_pcm 75689 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
kvm 373917 1 kvm_intel
e1000e 180191 0
sdhci_pci 10833 0
sdhci 23694 1 sdhci_pci
snd_timer 18934 1 snd_pcm
i2c_algo_bit 5391 1 i915
i2c_i801 9571 0
mmc_core 82754 2 sdhci,sdhci_pci
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
crc32c_intel 1987 0
ghash_clmulni_intel 4237 0
psmouse 71909 0
button 4662 1 i915
wmi 8379 0
cryptd 8741 2 ghash_clmulni_intel,ablk_helper
thermal 8119 0
battery 6773 0
video 11276 1 i915
serio_raw 4689 0
evdev 10266 21
microcode 12377 0
vboxdrv 1823469 0
tp_smapi 20660 0
thinkpad_ec 4253 1 tp_smapi
thinkpad_acpi 62561 0
nvram 5906 1 thinkpad_acpi
snd 60188 14 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel,thinkpad_acpi
soundcore 5442 1 snd
rfkill 15604 4 cfg80211,thinkpad_acpi,bluetooth
loop 18160 0
fuse 69173 3
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
processor 26855 1 acpi_cpufreq
ext4 440434 2
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
hid_generic 1113 0
usbhid 36996 0
hid 85929 2 hid_generic,usbhid
sd_mod 29559 4
ahci 21360 3
libahci 20023 1 ahci
ehci_hcd 41816 0
libata 167683 2 ahci,libahci
scsi_mod 133386 2 libata,sd_mod
usbcore 150398 4 btusb,uvcvideo,ehci_hcd,usbhid
usb_common 954 1 usbcore
$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bec3f15c-0839-47e7-9abd-115456cd399c ro
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 4290W1A/4290W1A, BIOS 8DET59WW (1.29 ) 04/02/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21e5fffff]
[ 0.000000] [mem 0x100000000-0x21e5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21e5fffff @ [mem 0xda999000-0xda99efff]
[ 0.000000] RAMDISK: [mem 0x37a36000-0x37d12fff]
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe120 000A4 (v01 LENOVO TP-8D 00001290 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafea000 0F716 (v01 LENOVO TP-8D 00001290 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf2d000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001290 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000dafe1000 00B2F (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8D 00001290 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
[ 0.000000] NODE_DATA [mem 0x21e5fc000-0x21e5fffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xda99efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
[ 0.000000] On node 0 totalpages: 2067245
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 873952 pages, LIFO batch:31
[ 0.000000] Normal zone: 18328 pages used for memmap
[ 0.000000] Normal zone: 1154664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000
[ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000
[ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032527
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bec3f15c-0839-47e7-9abd-115456cd399c ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8056756k/8886272k available (4727k kernel code, 617292k absent, 212224k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2093.150 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4187.72 BogoMIPS (lpj=6977166)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000036] Security Framework initialized
[ 0.000039] AppArmor: AppArmor disabled by boot time parameter
[ 0.000584] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002423] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003215] Mount-cache hash table entries: 256
[ 0.003422] Initializing cgroup subsys cpuacct
[ 0.003424] Initializing cgroup subsys memory
[ 0.003431] Initializing cgroup subsys devices
[ 0.003433] Initializing cgroup subsys freezer
[ 0.003434] Initializing cgroup subsys net_cls
[ 0.003435] Initializing cgroup subsys blkio
[ 0.003459] Disabled fast string operations
[ 0.003461] CPU: Physical Processor ID: 0
[ 0.003462] CPU: Processor Core ID: 0
[ 0.003467] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003470] mce: CPU supports 7 MCE banks
[ 0.003482] CPU0: Thermal monitoring enabled (TM1)
[ 0.003489] process: using mwait in idle threads
[ 0.003493] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x5
[ 0.004469] ACPI: Core revision 20120711
[ 0.012524] ftrace: allocating 18348 entries in 72 pages
[ 0.022278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055270] smpboot: CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07
[ 0.159848] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.159854] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.159856] ... version: 3
[ 0.159857] ... bit width: 48
[ 0.159858] ... generic registers: 4
[ 0.159859] ... value mask: 0000ffffffffffff
[ 0.159860] ... max period: 000000007fffffff
[ 0.159861] ... fixed-purpose events: 3
[ 0.159862] ... event mask: 000000070000000f
[ 0.186691] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.210978] Disabled fast string operations
[ 0.234299] Disabled fast string operations
[ 0.257620] Disabled fast string operations
[ 0.199853] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.259784] Brought up 4 CPUs
[ 0.259788] smpboot: Total of 4 processors activated (16751.91 BogoMIPS)
[ 0.263428] devtmpfs: initialized
[ 0.264748] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.265739] NET: Registered protocol family 16
[ 0.265859] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.265861] ACPI: bus type pci registered
[ 0.266122] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.266124] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.273390] PCI: Using configuration type 1 for base access
[ 0.273927] bio: create slab <bio-0> at 0
[ 0.273983] ACPI: Added _OSI(Module Device)
[ 0.273984] ACPI: Added _OSI(Processor Device)
[ 0.273986] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.273987] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.275697] ACPI: EC: EC description table is found, configuring boot EC
[ 0.280348] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.283474] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.283909] ACPI: Dynamic OEM Table Load:
[ 0.283911] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.284159] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.284617] ACPI: Dynamic OEM Table Load:
[ 0.284619] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.284732] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.285158] ACPI: Dynamic OEM Table Load:
[ 0.285160] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.285703] ACPI: Interpreter enabled
[ 0.285706] ACPI: (supports S0 S3 S4 S5)
[ 0.285723] ACPI: Using IOAPIC for interrupt routing
[ 0.288405] ACPI: Power Resource [PUBS] (on)
[ 0.291396] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.292570] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.292574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.292674] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.292703] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.292734] PCI host bridge to bus 0000:00
[ 0.292737] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
[ 0.292739] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.292741] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.292742] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.292744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.292746] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.292747] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.292756] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.292795] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.292807] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.292813] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.292818] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 0.292876] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.292900] pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit]
[ 0.292980] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.293014] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.293035] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.293046] pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff]
[ 0.293055] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f]
[ 0.293126] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.293155] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.293178] pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff]
[ 0.293272] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.293301] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.293318] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.293391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.293420] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.293551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.293590] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.293719] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.293763] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.293894] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.293934] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.294064] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.294110] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.294133] pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff]
[ 0.294227] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.294256] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.294387] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.294407] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af]
[ 0.294415] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf]
[ 0.294424] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7]
[ 0.294432] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb]
[ 0.294441] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 0.294449] pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff]
[ 0.294497] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.294519] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.294536] pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit]
[ 0.294558] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.294659] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
[ 0.294662] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.294745] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-fe]
[ 0.294908] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.295072] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.295772] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.299941] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.299950] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.300027] pci_bus 0000:05: busn_res: [bus 05-0c] is inserted under [bus 00-fe]
[ 0.300030] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.300035] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.300041] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.300050] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.300119] pci_bus 0000:0d: busn_res: [bus 0d] is inserted under [bus 00-fe]
[ 0.300307] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[ 0.300326] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.300353] pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff]
[ 0.300554] pci 0000:0d:00.0: supports D1 D2
[ 0.300555] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306694] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.306699] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.306704] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.306712] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.306745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.306816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.306837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.306859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.306882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.306999] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.307136] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.307137] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.309028] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.309081] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.309131] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.309181] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.309229] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.309271] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.309320] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.309369] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.309455] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.309461] vgaarb: loaded
[ 0.309462] vgaarb: bridge control possible 0000:00:02.0
[ 0.309493] PCI: Using ACPI for IRQ routing
[ 0.311293] PCI: pci_cache_line_size set to 64 bytes
[ 0.311819] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.311820] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
[ 0.311822] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.311823] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.311910] NetLabel: Initializing
[ 0.311911] NetLabel: domain hash size = 128
[ 0.311912] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.311923] NetLabel: unlabeled traffic allowed by default
[ 0.311936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.311941] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.313957] Switching to clocksource hpet
[ 0.318892] pnp: PnP ACPI init
[ 0.318909] ACPI: bus type pnp registered
[ 0.319234] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.319236] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.319237] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.319238] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.319240] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.319241] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.319243] pnp 00:00: [mem 0x000d4000-0x000d7fff]
[ 0.319244] pnp 00:00: [mem 0x000d8000-0x000dbfff]
[ 0.319245] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.319247] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.319248] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.319249] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.319251] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.319252] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.319254] pnp 00:00: [mem 0x00100000-0xdf9fffff]
[ 0.319255] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.319256] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.319307] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.319309] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.319311] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.319313] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.319315] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.319319] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.319320] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.319322] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.319323] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.319325] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.319327] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.319329] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.319330] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.319332] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.319334] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.319336] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.319338] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.319341] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.319360] pnp 00:01: [bus 00-fe]
[ 0.319362] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.319363] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.319365] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.319367] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.319370] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.319371] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.319373] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.319374] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.319376] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.319377] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.319379] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.319380] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.319382] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.319383] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.319384] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.319386] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.319387] pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
[ 0.319389] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.319442] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.319495] pnp 00:02: [io 0x0010-0x001f]
[ 0.319497] pnp 00:02: [io 0x0090-0x009f]
[ 0.319498] pnp 00:02: [io 0x0024-0x0025]
[ 0.319499] pnp 00:02: [io 0x0028-0x0029]
[ 0.319501] pnp 00:02: [io 0x002c-0x002d]
[ 0.319502] pnp 00:02: [io 0x0030-0x0031]
[ 0.319503] pnp 00:02: [io 0x0034-0x0035]
[ 0.319505] pnp 00:02: [io 0x0038-0x0039]
[ 0.319506] pnp 00:02: [io 0x003c-0x003d]
[ 0.319507] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.319508] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.319510] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.319511] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.319512] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.319513] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.319515] pnp 00:02: [io 0x0050-0x0053]
[ 0.319516] pnp 00:02: [io 0x0072-0x0077]
[ 0.319517] pnp 00:02: [io 0x0400-0x047f]
[ 0.319518] pnp 00:02: [io 0x0500-0x057f]
[ 0.319520] pnp 00:02: [io 0x0800-0x080f]
[ 0.319521] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.319522] pnp 00:02: [io 0x1600-0x167f]
[ 0.319524] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.319525] pnp 00:02: [mem 0x00000000-0x00000fff]
[ 0.319527] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.319528] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.319530] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.319531] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.319534] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.319580] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.319582] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.319584] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.319586] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.319587] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.319590] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.319591] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.319593] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.319595] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.319597] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.319599] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.319600] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.319603] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.319640] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.319665] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.319673] pnp 00:04: [io 0x0000-0x000f]
[ 0.319674] pnp 00:04: [io 0x0080-0x008f]
[ 0.319675] pnp 00:04: [io 0x00c0-0x00df]
[ 0.319677] pnp 00:04: [dma 4]
[ 0.319699] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.319705] pnp 00:05: [io 0x0061]
[ 0.319728] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.319735] pnp 00:06: [io 0x00f0]
[ 0.319744] pnp 00:06: [irq 13]
[ 0.319767] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.319773] pnp 00:07: [io 0x0070-0x0071]
[ 0.319778] pnp 00:07: [irq 8]
[ 0.319801] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.319808] pnp 00:08: [io 0x0060]
[ 0.319809] pnp 00:08: [io 0x0064]
[ 0.319814] pnp 00:08: [irq 1]
[ 0.319836] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.319845] pnp 00:09: [irq 12]
[ 0.319870] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.319897] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.319923] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.320404] pnp: PnP ACPI: found 11 devices
[ 0.320405] ACPI: ACPI bus type pnp unregistered
[ 0.327036] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.327055] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.327062] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.327074] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.327078] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.327084] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.327090] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.327098] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[ 0.327102] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.327109] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.327114] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.327161] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327163] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327166] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.327168] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.327170] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.327171] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.327173] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
[ 0.327175] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.327176] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.327178] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.327180] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.327211] NET: Registered protocol family 2
[ 0.327831] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.329126] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.329260] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.329279] TCP: reno registered
[ 0.329291] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.329323] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.329413] NET: Registered protocol family 1
[ 0.329426] pci 0000:00:02.0: Boot video device
[ 0.329740] PCI: CLS 64 bytes, default 64
[ 0.329780] Unpacking initramfs...
[ 0.387559] Freeing initrd memory: 2932k freed
[ 0.387980] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.387985] software IO TLB [mem 0xd6999000-0xda998fff] (64MB) mapped at [ffff8800d6999000-ffff8800da998fff]
[ 0.388355] audit: initializing netlink socket (disabled)
[ 0.388369] type=2000 audit(1354309309.283:1): initialized
[ 0.400730] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.402517] VFS: Disk quotas dquot_6.5.2
[ 0.402562] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.402683] msgmni has been set to 15741
[ 0.402876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.402905] io scheduler noop registered
[ 0.402908] io scheduler deadline registered
[ 0.402955] io scheduler cfq registered (default)
[ 0.403344] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.403346] vesafb: scrolling: redraw
[ 0.403347] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.403726] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005600000, using 3072k, total 3072k
[ 0.464566] Console: switching to colour frame buffer device 128x48
[ 0.525336] fb0: VESA VGA frame buffer device
[ 0.525345] intel_idle: MWAIT substates: 0x21120
[ 0.525347] intel_idle: v0.4 model 0x2A
[ 0.525348] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.525379] GHES: HEST is not enabled!
[ 0.525424] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.525789] Linux agpgart interface v0.103
[ 0.525853] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.528874] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.528885] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.528988] mousedev: PS/2 mouse device common for all mice
[ 0.529055] rtc_cmos 00:07: RTC can wake from S4
[ 0.529184] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.529213] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.529294] cpuidle: using governor ladder
[ 0.529407] cpuidle: using governor menu
[ 0.529520] drop_monitor: Initializing network drop monitor service
[ 0.529586] TCP: cubic registered
[ 0.529691] NET: Registered protocol family 10
[ 0.529824] NET: Registered protocol family 17
[ 0.529835] Key type dns_resolver registered
[ 0.530084] PM: Hibernation image not present or could not be loaded.
[ 0.530092] registered taskstats version 1
[ 0.530788] rtc_cmos 00:07: setting system clock to 2012-11-30 21:01:50 UTC (1354309310)
[ 0.532050] Freeing unused kernel memory: 772k freed
[ 0.532166] Write protecting the kernel read-only data: 8192k
[ 0.532489] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.536235] Freeing unused kernel memory: 1408k freed
[ 0.538800] Freeing unused kernel memory: 568k freed
[ 0.546844] systemd-udevd[54]: starting version 195
[ 0.575245] ACPI: bus type usb registered
[ 0.575302] usbcore: registered new interface driver usbfs
[ 0.575336] usbcore: registered new interface driver hub
[ 0.576542] SCSI subsystem initialized
[ 0.577258] usbcore: registered new device driver usb
[ 0.577704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.577787] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.577792] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.577802] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.577951] ACPI: bus type scsi registered
[ 0.578232] libata version 3.00 loaded.
[ 0.581720] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.581729] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.581749] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000
[ 0.590555] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.590798] hub 1-0:1.0: USB hub found
[ 0.590803] hub 1-0:1.0: 3 ports detected
[ 0.590927] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.590931] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.590936] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.594840] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.594852] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.594872] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000
[ 0.603890] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.604176] hub 2-0:1.0: USB hub found
[ 0.604183] hub 2-0:1.0: 3 ports detected
[ 0.604302] ahci 0000:00:1f.2: version 3.0
[ 0.604376] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 0.604428] ahci: SSS flag set, parallel bus scan disabled
[ 0.617350] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.617356] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.617362] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.631249] scsi0 : ahci
[ 0.631497] scsi1 : ahci
[ 0.631608] scsi2 : ahci
[ 0.631699] scsi3 : ahci
[ 0.631792] scsi4 : ahci
[ 0.631879] scsi5 : ahci
[ 0.631927] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
[ 0.631930] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
[ 0.631931] ata3: DUMMY
[ 0.631932] ata4: DUMMY
[ 0.631935] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
[ 0.631936] ata6: DUMMY
[ 0.897214] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 0.950525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.951864] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.951874] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.951880] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.952847] ata1.00: ATA-8: HITACHI HTS543232A7A384, ES2ZB70B, max UDMA/100
[ 0.952856] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.954250] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 0.954261] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.954266] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.955234] ata1.00: configured for UDMA/100
[ 0.955586] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54323 ES2Z PQ: 0 ANSI: 5
[ 1.021089] hub 1-1:1.0: USB hub found
[ 1.021238] hub 1-1:1.0: 6 ports detected
[ 1.127117] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.250986] hub 2-1:1.0: USB hub found
[ 1.251142] hub 2-1:1.0: 8 ports detected
[ 1.280360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.317185] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 1.390335] tsc: Refined TSC clocksource calibration: 2093.233 MHz
[ 1.390358] Switching to clocksource tsc
[ 1.480487] usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
[ 1.600245] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.604868] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.604916] sd 0:0:0:0: [sda] Write Protect is off
[ 1.604920] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.604942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.637045] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[ 1.648127] sda: sda1 sda2 sda3 sda4
[ 1.648713] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.730250] usbcore: registered new interface driver usbhid
[ 1.730253] usbhid: USB HID core driver
[ 1.730912] input: Areson Revoltec FightMouse PRO as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[ 1.731350] hid-generic 0003:FFC0:001F.0001: input,hidraw0: USB HID v10.01 Mouse [Areson Revoltec FightMouse PRO] on usb-0000:00:1d.0-1.1/input0
[ 1.734730] input: Areson Revoltec FightMouse PRO as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
[ 1.734938] hid-generic 0003:FFC0:001F.0002: input,hidraw1: USB HID v10.01 Mouse [Areson Revoltec FightMouse PRO] on usb-0000:00:1d.0-1.1/input1
[ 5.425946] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.342473] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 6.377129] systemd[1]: Set hostname to <diiis-tp>.
[ 7.519645] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.519696] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.519709] systemd[1]: Starting Remote File Systems.
[ 7.520387] systemd[1]: Reached target Remote File Systems.
[ 7.520397] systemd[1]: Starting Syslog Socket.
[ 7.520994] systemd[1]: Listening on Syslog Socket.
[ 7.521004] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.521837] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.521847] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.522528] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.522560] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.523727] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.523741] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.523773] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.523783] systemd[1]: Starting Encrypted Volumes.
[ 7.524411] systemd[1]: Reached target Encrypted Volumes.
[ 7.524484] systemd[1]: Starting udev Kernel Socket.
[ 7.525116] systemd[1]: Listening on udev Kernel Socket.
[ 7.525162] systemd[1]: Starting udev Control Socket.
[ 7.525807] systemd[1]: Listening on udev Control Socket.
[ 7.525817] systemd[1]: Expecting device dev-sda2.device...
[ 7.526399] systemd[1]: Expecting device dev-sda4.device...
[ 7.526982] systemd[1]: Starting Journal Socket.
[ 7.527586] systemd[1]: Listening on Journal Socket.
[ 7.527603] systemd[1]: Started File System Check on Root Device.
[ 7.527613] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.541610] systemd[1]: Mounting Temporary Directory...
[ 7.616950] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 7.669464] systemd[1]: Starting Load Kernel Modules...
[ 7.675116] systemd[1]: Starting udev Kernel Device Manager...
[ 7.814857] systemd[1]: Starting Apply Kernel Variables...
[ 7.823733] systemd[1]: Mounting Huge Pages File System...
[ 7.832398] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.844513] systemd[1]: Starting udev Coldplug all Devices...
[ 7.850467] systemd[1]: Starting Setup Virtual Console...
[ 7.874608] systemd[1]: Mounting Debug File System...
[ 7.961282] systemd[1]: Starting Set Up Additional Binary Formats...
[ 7.994472] systemd[1]: Starting Journal Service...
[ 7.998537] systemd[1]: Started Journal Service.
[ 7.998577] systemd[1]: Starting Syslog.
[ 7.999104] systemd[1]: Reached target Syslog.
[ 8.359696] ACPI: Requesting acpi_cpufreq
[ 8.412122] systemd-udevd[123]: starting version 196
[ 8.893109] fuse init (API version 7.20)
[ 8.955823] loop: module loaded
[ 9.139526] Non-volatile memory driver v1.3
[ 9.195397] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 9.195400] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 9.195402] thinkpad_acpi: ThinkPad BIOS 8DET59WW (1.29 ), EC unknown
[ 9.195403] thinkpad_acpi: Lenovo ThinkPad X220, model 4290W1A
[ 9.195755] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 9.195905] thinkpad_acpi: radio switch found; radios are enabled
[ 9.196090] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 9.196179] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 9.196180] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 9.197810] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 9.198301] Registered led device: tpacpi::thinklight
[ 9.198324] Registered led device: tpacpi::power
[ 9.198339] Registered led device: tpacpi::standby
[ 9.198353] Registered led device: tpacpi::thinkvantage
[ 9.198358] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 9.198480] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 9.199316] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input3
[ 9.308978] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 9.318246] tp_smapi 0.41 loading...
[ 9.318355] tp_smapi successfully loaded (smapi_port=0xb2).
[ 9.367258] EXT4-fs (sda1): re-mounted. Opts: user_xattr
[ 9.427901] vboxdrv: Found 4 processor cores.
[ 9.428159] vboxdrv: fAsync=0 offMin=0x1be offMax=0x2696
[ 9.428217] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.428218] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
[ 9.723703] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 10.183460] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x26
[ 10.197477] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x26
[ 10.198136] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x26
[ 10.198699] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x26
[ 10.199304] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 10.362833] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.362837] ACPI: Thermal Zone [THM0] (51 C)
[ 10.373108] ACPI: Battery Slot [BAT0] (battery present)
[ 10.403638] wmi: Mapper loaded
[ 10.455848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 10.456080] ACPI: Lid Switch [LID]
[ 10.456135] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 10.456187] ACPI: Sleep Button [SLPB]
[ 10.456263] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 10.456313] ACPI: Power Button [PWRF]
[ 10.685901] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 10.801198] sdhci: Secure Digital Host Controller Interface driver
[ 10.801201] sdhci: Copyright(c) Pierre Ossman
[ 10.819640] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 10.820650] Registered led device: mmc0::
[ 10.848572] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 10.848575] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 10.848635] e1000e 0000:00:19.0: setting latency timer to 64
[ 10.848745] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 10.848783] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 10.853101] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 11.002081] cfg80211: Calling CRDA to update world regulatory domain
[ 11.043526] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:56:36:28
[ 11.043530] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 11.043563] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.956061] ACPI: Invalid Power Resource to register!
[ 11.043640] ACPI Warning:
[ 11.043644] 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120711/utaddress-251)
[ 11.043647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.043652] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120711/utaddress-251)
[ 11.043656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.043658] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.062453] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 11.062464] Copyright(c) 2003-2012 Intel Corporation
[ 11.062609] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 11.062611] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900055dc000
[ 11.062613] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 11.063330] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[ 11.071297] iTCO_vendor_support: vendor-support=0
[ 11.082647] [drm] Initialized drm 1.1.0 20060810
[ 11.092375] ACPI: AC Adapter [AC] (on-line)
[ 11.299121] pci 0000:00:00.0: Intel Sandybridge Chipset
[ 11.299217] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 11.300256] pci 0000:00:00.0: detected 65536K stolen memory
[ 11.300302] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 11.300304] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 11.300320] Console: switching to colour dummy device 80x25
[ 11.300457] i915 0000:00:02.0: setting latency timer to 64
[ 11.340831] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 11.340840] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.340841] [drm] Driver supports precise vblank timestamp query.
[ 11.340875] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.499265] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00, board id: 1611, fw id: 774180
[ 11.499279] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 11.549302] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 11.617977] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 11.657398] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 11.657461] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 11.657872] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.767839] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 11.767842] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[ 11.767859] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 11.767861] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 11.767863] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 11.767864] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 11.767866] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 11.767868] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 11.768017] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 11.768189] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 11.779228] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 11.779232] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[ 11.779234] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 11.779296] Registered led device: phy0-led
[ 11.804279] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.821289] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.994884] fbcon: inteldrmfb (fb0) is primary device
[ 12.159360] Console: switching to colour frame buffer device 170x48
[ 12.162792] fb0: inteldrmfb frame buffer device
[ 12.162793] drm: registered panic notifier
[ 12.164681] acpi device:01: registered as cooling_device4
[ 12.164752] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 12.164800] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 12.165021] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 12.165149] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 12.557082] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 12.737682] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 12.795111] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.795198] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.795259] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.593745] Linux media interface: v0.10
[ 13.609115] Linux video capture interface: v2.00
[ 13.648695] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.781882] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 13.784149] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13
[ 13.784281] usbcore: registered new interface driver uvcvideo
[ 13.784283] USB Video Class driver (1.1.1)
[ 13.805523] Bluetooth: Core ver 2.16
[ 13.805545] NET: Registered protocol family 31
[ 13.805548] Bluetooth: HCI device and connection manager initialized
[ 13.805550] Bluetooth: HCI socket layer initialized
[ 13.805552] Bluetooth: L2CAP socket layer initialized
[ 13.805559] Bluetooth: SCO socket layer initialized
[ 13.882978] usbcore: registered new interface driver btusb
[ 14.022441] systemd-journald[131]: Received SIGUSR1
[ 14.138645] systemd-journald[131]: File /var/log/journal/e5244b70a0b9c4709d9d39190000019e/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 16.285888] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.345015] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.657067] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.072847] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 18.237861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 18.238072] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 18.328598] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 18.523915] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 18.524132] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 18.643167] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.869146] wlan0: authenticate with 00:24:fe:a3:ae:00
[ 21.892979] wlan0: send auth to 00:24:fe:a3:ae:00 (try 1/3)
[ 21.895988] wlan0: authenticated
[ 21.898705] wlan0: associate with 00:24:fe:a3:ae:00 (try 1/3)
[ 21.902665] wlan0: RX AssocResp from 00:24:fe:a3:ae:00 (capab=0x431 status=0 aid=5)
[ 21.905091] wlan0: associated
[ 21.905136] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.335766] usb 1-1.4: USB disconnect, device number 5
[ 23.224865] smapi smapi: smapi_request: SMAPI error: SMAPI function is not available (func=2116)
[ 23.224880] smapi smapi: __get_real_thresh: cannot get start_thresh of bat=0: SMAPI function is not available
[ 29.453186] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 30.689504] [UFW BLOCK] IN=wlan0 OUT= MAC=a0:88:b4:3f:86:dc:00:24:fe:c3:17:de:08:00 SRC=208.68.163.221 DST=192.168.2.158 LEN=126 TOS=0x00 PREC=0x00 TTL=54 ID=17020 DF PROTO=TCP SPT=5222 DPT=37447 WINDOW=12 RES=0x00 ACK PSH URGP=0
[ 38.534067] [UFW BLOCK] IN=wlan0 OUT= MAC=a0:88:b4:3f:86:dc:00:24:fe:c3:17:de:08:00 SRC=108.160.160.162 DST=192.168.2.158 LEN=231 TOS=0x00 PREC=0x00 TTL=56 ID=38421 DF PROTO=TCP SPT=80 DPT=39643 WINDOW=48 RES=0x00 ACK PSH URGP=0
[ 40.560657] systemd-journald[131]: File /var/log/journal/e5244b70a0b9c4709d9d39190000019e/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
Maybe you are looking for
-
I am having trouble transfering music from windowns media player to itunes. If i delete the music from windows media player itunes cant locate the song.
-
Im Really going crazy! I can't install Adobe AIR Windows 7
I tried everything, I read dozens of discussions instructors solution options - nothing works! Just before I go crazy! I want to solve this problem, because I paid money for App that uses Adobe AIR!! My problem is when I try to install the software a
-
Not showing up on App Store with more than 200k downloads in last three days?
My app Flying Bieber HD has gotten more than 200k downloads since our launch on Saturday, but we are not showing up on App Store ranks at all. We got so many downloads through social media promotions and we got Bieber's entourage to promote it. Are
-
Exit or badi for tcode F110, which called during the payment run.
Hi All, We have a requirement to create a txt file in the application folder, while doing the payment run. right we are copying the standard program RFFOEDI1, but we dont know in which part of code , we can find the values from REGUP and REGUH tables
-
500 INternal server error on making ajax call to method of Application page
HI I have a application page that have a method in code behond ..i need to call this method on usercontrol using jquey on client side..when i ma makeing the call to method using $.Ajax({definiotion}); then it gives me error 500 internal server error