Trackpoint stops working after wireless USB install

I have a Lenovo Thinkpad X61s.
I just installed a wireless USB card today and it rendered the trackpoint non-functional.  Uninstalling the wireless software does not correct the issue.
A USB mouse will work on the laptop.
Any thoughts on how to correct this?
Thanks,
-Scott

This driver resolved my issue;
https://github.com/d235j/360Controller/releases/

Similar Messages

  • My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

    My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
    Please help!

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • Usb ports stopped working after windows 7 install - pavilion g6-1001sa

    After reinstalling windows - My usb ports have completely stopped working   - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
    thanks
    JO 
    Please help

    teethinnit wrote:
    I had tried here - the correct driver was not here - it is the USB controller that I am looking for
    Ok go to your search bar and type "Change Device installation settings"
    and look at my screen shot and this change should make it look for the latest driver.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Satellite P200 - Microphone has stopped working after Windows 7 install

    My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
    Any ideas anyone?
    I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

    Hi buddy,
    Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
    I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
    http://eu.computers.toshiba-europe.com
    I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

  • Touchsmart IQ770 - IR stopped working after Windows 7 Install

    Have had the satellite hookup working under Vista. Loaded up Windows 7 and now when I try to setup the tuner the IR is not found.
    During Tuner setup I see the signal and hear the audio, it is just the IR part that stops the setup configuration from working.
    Could the Bluetooth be interference?

    Try to install the HP Remote Solution software when it becomes available to see if that works.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01778879&lc=en&dlc=en&cc=us&product=3781376&lan...
     Certain buttons on the Remote Control for Media Center might stop working.
    Update to the latest HP Remote solution download from www.hp.com/support .

  • DVD READER STOP WORKING AFTER ITUNES IS INSTALLED

    FINNALLY GOT ITUNES AND QUICKTIME TO WORK BUT NOW MY COMPUTER WON'T RECONIZE MY DVD BURNER. IT DOES RECONIZE A USB EXTEROR BURNER. IF I UNINSTALL ITUNES AND QUICK TIME MY INTERNAL BURNER WORKS. PLEASE HELP

    After reading this it looks like you can either use your optical drive in iTunes but not for anything else or if your change the Registry as the document implies you can use your drive on your computer but can't burn in iTunes. Hardly seems like a fix to me. Am I missing something here?

  • Queue Based printers stopped working after Zen 7 installed

    We have just installed Zenworks 7 suite. We have Windows XP machines with new Novell client and zfdagent. We have a policy setup and users can login and receive their applications but they can not print. All over our printers have Queues, Servers and Printer Objects listed in Console1. Each classroom has two printers. When the user checks the printer in Printer and Faxes it is listed but the port are not listed. How can I fix this problem?
    Thanks

    When the user does a right click over the printer and selects Properties. On the Properties window go to the Ports tab. On this tab the port for the printer should be listed as \\severname\printer. If you login locally you can see this printer and print to it. When you login using your network credentials you can see the printers but not printer to them. One of the printers says unable to connect. The other says nothing, but still will not print.
    Originally Posted by Peter
    jdelucaka wrote:
    > but the port are not listed
    Can you be a little more specific about this? Not listed in where?
    Peter
    eDirectory Rules!
    DreamLAN Network Consulting Ltd. - Leading Authority on eDirectory and LDAP technologies

  • WI FI STOPPED WORKING AFTER 6.0 INSTALLED

    Hello,
    Frustrated isnt the word. I was prompted to download IOS6, and did so last week. Since then, I CANNOT re-establish Wi-Fi connections ANYWHERE. The button to turn on the Wi-Fi is greyed out and not functioning.
    I was advised to back up and restore to new settings, and that would take care of it - NOT! Asking the Carrier (Telus) for tech support is probably as good as asking the gal in the McDonalds drive thru for help.
    Please let me know if anyone has an answer

    Try a Restore of the Firmware with iTunes on computer. If this is what you did, then you need to take iPhone to Apple for Warranty service.

  • X121e touch pad buttons stop working after a while

    Hello everyone,
    I have a lenovo thinkpad x121e.
    The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
    If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
    It is always the same routine. Rebooting windows, everything alright, stop working, ...
    I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
    Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
    Many thanks in advance.

    Hi again, li-lup
    I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
    The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver. 
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • USB hub and internet sharing stop working after sleep

    Hi,
    I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
    My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
    I have all the Mac updates installed.

    Thanks Barry.
    The hub is on its way to the manufacturer for after sales service...
    But the issue with AirPort remains the same, even after resetting SMC.
    Some clarification:
    * It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
    * The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

  • Help, 10.6.8 update, all usb ports stop working after 10hrs

    I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
    I did the install a few times  again to try to see if it would help and didnt.
    i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still  there.
    My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
    Any suggestions would really help. thanks!

    I have a early 2008 macbookpro 2.8 duel with silver keys.
    I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
    I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
    But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
    Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
    Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

  • PS 6 beta stopped working - after installing my old tablet

    PS 6 beta stopped working - after installing my old tablet
    Just to let U know, everywhere else (GIMP,Paint etc) there is no problem,
    also tablet is fully working and operational,
    drivers are up to date,
    PS 6 beta brign an error 01 .
    Also say about contating support ...
    How can I constact support when I Dont have a license or serial number etc..
    since it ask me about it while trying to reach support.... pointless! mad!
    ? What now? should I trash my favorite tablet and buy some junk just because of this BUG?
    or will it be solved somehow?
    I do believe that nobody will even care about one human and none of programmers will update
    database of this program for older tablets,,, but JSUT TO LET U KNOW - its not working.
    and free software as GIMP is working just perfectly, and adobe **** is not even opening a program..

    oh well, as I mentioned my tablet is old, ( but i thought that new version of photoshop will contain also some parts from old ones for compability, as U said its not working like that o.o  ) is is Pentagram Duo Pen (USB)
       I uninstalled tablet drivers and adobe software and reinstalled again without tablet, now it's working so it was a driver that messed up all..
    Oh, the error code nr was : 1 
    i also was suprised but this is what I got from photoshop in error message the rest of it was about contacting adobe.com/support ..blahblahblah
    I am still not fully understanding how its possible that so well paid software is not compatble with my super old tablet while even stupid paint is..
    I am sure it is complicated, however as U see I am not able to anything else but operate with mouse.. or switch to linux and practice in gimp..
    if U wonna to take a look at the file of that driver i will post it here :
    (more files on http://download.pentagram.eu/en/drivers/graphic_tablets/duopen_usb/DuoPen_USB_Win2K_XP.zip)
    Cheers..
    ; Installation inf for Pentagram USB Tablet
    ; (c) Copyright 2000 Pentagram Pte Ltd
    [Version]
    Signature="$CHICAGO$"
    Class=Mouse
    ;Class=USB
    ;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    provider=%MSFT%
    DriverVer=08/05/1999
    [SourceDisksNames]
    1="Pentagram USB Tablet Installation Disk",,,
    [SourceDisksFiles]
    MGUSBTAB.sys = 1
    MGUSBTAB.inf = 1
    wintab32.dll=1
    wtmgl.exe=1
    wtdata=1
    mgltab.cpl=1
    [Manufacturer]
    %MfgName%=ModelSection
    [ModelSection]
    %USB\VID_081A&PID_1000.DeviceDesc%=MGUSBTAB.Dev, USB\VID_081A&PID_1000
    ;[PreCopySection]
    ;HKR,,NoSetupUI,,1
    [DestinationDirs]
    MGUSBTAB.Files.Ext = 12,
    MGUSBTAB.Files.Inf = 17,
    MGUSBTAB.Copy             = 11,
    ; DIRID_SYSTEM
    [MGUSBTAB.Dev]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT.Services]
    Addservice = MGUSBTAB, 0x00000002, MGUSBTAB.AddService
    [MGUSBTAB.AddService]
    DisplayName    = %MGUSBTABLET.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %10%\System32\Drivers\MGUSBTAB.sys
    LoadOrderGroup = Base
    [MGUSBTAB.AddReg]
    HKR,,DevLoader,,*ntkern
    HKR,,NTMPDriver,,MGUSBTAB.sys
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","MaximumTransferSize",0x1000 1,4096
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","DebugLevel",0x10001,5
    HKLM,%JX_REGISTRY_PATH%,"NumberOfButtons",0x00010003,3
    HKLM,%JX_REGISTRY_PATH%,"SampleRate",0x00010003,100
    HKLM,%JX_REGISTRY_PATH%,"x1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y2",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"tabletMode",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"xSens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"ySens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"clickThreshold",0x00010003,40
    HKLM,%JX_REGISTRY_PATH%,"x1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2Phys",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y2Phys",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"mappings",0x00000000,"01 02 04 00 00 00 00 00 "
    HKLM,%JX_REGISTRY_PATH%,"parameter1",0x00000000,"µŇ¬šŤ–šŚß«žť“š‹Äß©šŤŚ–‘ßÎŃĎÉÄßąŤ’ž‹ĹßÉŇ ť†‹šßť–‘žŤ†"
    HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"wtmgl",0,"wtmgl.exe"
    ;for GUID
    ;HKLM,%JX_REGISTRY_PATH%,FriendlyName,,"Pentagram Serial Tablet"
    [MGUSBTAB.Files.Ext]
    MGUSBTAB.sys
    [MGUSBTAB.Files.Inf]
    MGUSBTAB.Inf
    [MGUSBTAB.Copy]
    wintab32.dll
    wtmgl.exe
    wtdata
    mgltab.cpl
    [Strings]
    MSFT="Microsoft"
    MfgName="Pentagram"
    USB\VID_081A&PID_1000.DeviceDesc="Pentagram USB Tablet"
    MGUSBTABLET.SvcDesc="USB Tablet driver"
    JX_REGISTRY_PATH="System\CurrentControlSet\Services\mgltab\Parameters"

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • Right USB Port stops working after disconnecting device since 10.9.2

    Hi,
    Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
    Steps I've taken:
    Disk Persmission
    PRAM
    SMC
    Reapplied the 10.9.2 update
    Sent feedback to Apple
    Some Output:
    Boot Mode: Normal
    Total CPU usage:
       User 11%                    System 10%
    Max %CPU by process (name, UID, %):
       WindowServer         0   4.6
    Loaded extrinsic kernel extensions:
       at.obdev.nke.LittleSnitch (4052)
       com.driver.JRDUSBModemData64 (4.0.5)
       com.protech.NoSleep (1.3.3)
    Loaded extrinsic daemons:
       net.sourceforge.MonolingualHelper
       com.oracle.java.JavaUpdateHelper
       com.oracle.java.Helper-Tool
       com.microsoft.office.licensing.helper
       com.freemacsoft.appcleanerd
       com.adobe.fpsaud
       at.obdev.littlesnitchd
    Loaded extrinsic user agents:
       com.oracle.java.Java-Updater
       at.obdev.LittleSnitchUIAgent
    /Library/LaunchAgents:
       at.obdev.LittleSnitchUIAgent.plist
       com.oracle.java.Java-Updater.plist
    /Library/LaunchDaemons:
       at.obdev.littlesnitchd.plist
       com.adobe.fpsaud.plist
       com.freemacsoft.appcleanerd.plist
       com.microsoft.office.licensing.helper.plist
       com.oracle.java.Helper-Tool.plist
       com.oracle.java.JavaUpdateHelper.plist
       net.sourceforge.MonolingualHelper.plist
    /Library/PrivilegedHelperTools:
       com.freemacsoft.appcleanerd
       com.microsoft.office.licensing.helper
       com.oracle.java.JavaUpdateHelper
       net.sourceforge.MonolingualHelper
    Extrinsic loadable bundles:
       /System/Library/Extensions/JRDMassStorageDriver32.kext
                 (No bundle ID)
       /System/Library/Extensions/JRDMassStorageDriver64.kext
                 (No bundle ID)
       /System/Library/Extensions/JRDUSBModemData32.kext
                 (com.driver.JRDUSBModemData32)
       /System/Library/Extensions/JRDUSBModemData64.kext
                 (com.driver.JRDUSBModemData64)
       /System/Library/Extensions/LittleSnitch.kext
                 (at.obdev.nke.LittleSnitch)
       /System/Library/Extensions/NoSleep.kext
                 (com.protech.NoSleep)
       /Library/Audio/Plug-Ins/Components/A52Codec.component
                 (com.shepmater.A52Codec)
       /Library/Internet Plug-Ins/Flash Player.plugin
                 (com.macromedia.Flash Player.plugin)
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
                 (com.oracle.java.JavaAppletPlugin)
       /Library/PreferencePanes/Flash Player.prefPane
                 (com.adobe.flashplayerpreferences)
       /Library/PreferencePanes/JavaControlPanel.prefPane
                 (com.oracle.java.JavaControlPanel)
       /Library/PreferencePanes/NoSleep.prefPane
                 (com.protech.NoSleepPref)
       /Library/QuickTime/AC3MovieImport.component
                 (com.cod3r.ac3movieimport)
       /Library/Spotlight/LogicPro.mdimporter
                 (No bundle ID)
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
                 (com.skype.skypeabdialer)
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
                 (com.skype.skypeabsms)
       Library/QuickLook/Pacifist.qlgenerator
                 (com.charlessoft.pacifist.qlgenerator)
       Library/Services/Clip to Day One.workflow
                 (No bundle ID)
    Login hook:
       /Library/Scripts/Hooks/login.sh
    Global login items:
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
       $HELPER_PATH
    User login items:
       iTunesHelper
       Sparrow
       Sort Menubar Items
       AppCleaner Helper
       SurplusMeterAgent
    Safari extensions:
       Shut Up
       AdBlock
       SafariKeywordSearch
       Disconnect
       MapTricks
    Restricted user files: 28
    Font problems: 0
    Elapsed time (s): 130
    etrecheck output:
    Hardware Information:
              MacBook Air - model: MacBookAir3,1
              1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
              2 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
    Disk Information:
              APPLE SSD TS064C disk0 : (60.67 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        disk0s2 (disk0s2) <not mounted>: 59.81 GB
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              EFI (disk2s1) <not mounted>: 209.7 MB
              Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
              disk2s3 (disk2s3) <not mounted>: 189.89 GB
              Boot OS X (disk2s4) <not mounted>: 134.2 MB
    FireWire Information:
    Kernel Extensions:
              at.obdev.nke.LittleSnitch          Version: 4052
              com.driver.JRDUSBModemData64          Version: 4.0.5
              com.protech.NoSleep          Version: 1.3.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                     [loaded]          at.obdev.littlesnitchd.plist
                     [loaded]          com.adobe.fpsaud.plist
                     [loaded]          com.freemacsoft.appcleanerd.plist
                     [loaded]          com.microsoft.office.licensing.helper.plist
                     [loaded]          com.oracle.java.JavaUpdateHelper.plist
                     [loaded]          net.sourceforge.MonolingualHelper.plist
    Launch Agents:
                     [loaded]          at.obdev.LittleSnitchUIAgent.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              Sparrow
              Sort Menubar Items
              AppCleaner Helper
              SurplusMeterAgent
    3rd Party Preference Panes:
              Flash Player
              Java
              NoSleep
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Top Processes by CPU:
                  12%          com.apple.WebKit.Networking
                   6%          Safari
                   4%          WindowServer
                   3%          EtreCheck
                   2%          hidd
                   1%          Terminal
                   1%          notifyd
                   1%          opendirectoryd
                   1%          com.apple.WebKit.WebContent
                   0%          Dock
    Top Processes by Memory:
              147 MB          Safari
              137 MB          com.apple.WebKit.WebContent
              49 MB          mds_stores
              29 MB          com.apple.WebKit.Networking
              27 MB          TextEdit
              23 MB          WindowServer
              20 MB          Disk
              20 MB          Sparrow
              20 MB          CVMCompiler
              18 MB          Finder
    Nothing out of the ordinairy. Thanks for any help

    It's an Apple Pro keyboard and mouse, the dongle is
    plugged into the Mac and not the keyboard. The same
    set-up is, and has been working on all our other
    Macs.
    The sleep issue sounds interesting- hum, maybe...
    Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
    I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
    AndyH

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Maybe you are looking for