TrackPoint, Touchpad and Bluetooth Mouse

Hi there,
I tried to get my SE K800i working as a Bluetooth mouse in X. On my Desktop everything works fine. I just use /dev/input/mice with the "mouse"-driver in xorg.conf and as soon as the BT mouse connects, I can use it.
Unfortunately I can't do this on my laptop (ThinkPad T41). I have to configure each mouse separately to make full use of the stick and touchpad, so I can't use /dev/input/mice. The BT mouse will always show up as /dev/input/mouse3.
Is there a way to configure X, so that it recognizes /dev/input/mouse3 as soon as it shows up? I don't want to restart X every time I have to use the BT mouse (mostly for presentations).
Thanks,
Pavel

I know you did, I was simply explaining fully (perhaps other people have this issue too and would like to know more). When I said 'mouse pointer speed' I simply meant 'pointer speed' (i.e. for both devices, not for the +bluetooth mouse+), the terminology is confusing.
The Pointer Speed slider in the Pointer Options of the Mouse control panel is not, strictly speaking, for the external/bluetooth +mouse+, but a system-wide, global option for the +pointer+.
I guess I knew there wouldn't be an easy answer. If Toshiba/Synaptics take note of these forums, perhaps we can look forward to a solution.

Similar Messages

  • Touchpad and bluetooth issue

    Hi,
    The bluetooth and touchpad enable/disable feature is not working on my hp g4 1303AU model. I have installed lots of bluetooth drivers but to no avail.
    Please advise.
    Thanks,
    Parag

    Hello @paragpratim,
    I have read your post on how the TouchPad and Bluetooth software on your computer is not functioning correctly, and I would be happy to assist you in this matter!
    Since the TouchPad and the Bluetooth are collectively not working, I recommend installing the original software and drivers that first came with your notebook computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7) or for (Windows 8).
    Once this software is installed, please follow this resource on Using HP Support Assistant (Windows 7) or for (Windows 8) to update the drivers.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Is it Possible to have different sensitivities for trackpoint and bluetooth mouse.

    I have an x200. I recently purchased an interlink electronics bluetooth mouse and connection and setup worked great.
    The only problem is that the sensitivity that is good for my tackpoint is WAY too sensitive for the mouse.
    Is there a way to set up different sensitivities for the bluetooth mouse and the trackpoint so that i don't have to toggle the sensitivity every time I plug in my mouse?

    Thanks, but I understand the varying inherent sensitivities. I was just wondering if i could adjust a setting or install drivers or something that will automatically change the sensitivity setting when my mouse is connected to the computer. I'm looking for that or something that will specify sensitivity settings for my mouse without affecting the trackpoint.
    I have an x200 running Vista Ultimate with the lenovo trackpoint drivers.
    Message Edited by ender63071 on 01-07-2009 03:27 AM

  • Hp stream 8 and bluetooth mouse problems

    can anyone help me
     I just bought an Hp stream 8 and a wireless mouse and keyboard. The keyboard works fine, but the mouse I bought off of ebay isnt wanting to pair. It worked the first day but then shut the mouse off for the night and turned it back on the next day and was being really glichy, and then finally it wont pair at all. Is it the mouse or my tablet. If its the mouse, what kind of mouse should i purchase that will work but isnt ungodly expensive?

    I can't really make product recommendations as a tech agent, but I would assume any Bluetooth mouse should work fine. It's more likely a case of this specific mouse having issues.
    You can check out www.hpshopping.com for Bluetooth mice, there's some pretty cheap ones there that should do the trick just fine, and are backed by HP support.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • X300 USB mouse (and bluetooth mouse) stutters

    Hi,
    I have a X300 which works really great apart from one really annoying problem:
    The internal mouse works great (UltraNav) however when I connect an external USB mouse (Logitech or Microsoft) the mouse sometimes works great but may times it stutters very badly.
    I am running Vista with 802.11N (tried G with the same problem), Kaspersky and Firefox.
    I thought that I might have a problem with the USB mouse conflicting with my WIFI so I bought the Lenovo Bluetooth Mouse - only to see the same problem.
    One thing I noticed was that  even if the external stutters - the internal Ultranav works like a charm - no stutter at all.
    Any ideas?
    Message Edited by linda1981a on 10-31-2008 05:05 PM

    This is still happening, no one else having this problem?

  • Problem between PcSuite and Bluetooth Mouse

    I'm having a very odd problem.
    I have a Microsoft Notebook Bluetooth Mouse 5000 that works perfectly in my bluetooth enabled DELL Inspiron 1520 running Windows Vista Business, but after I install ANY version of PcSuite (even the NSeries one) to connect my N73ME using bluetooth, the mouse starts to LAG. If i uninstall Nokia PcSuite, the mouse lags stops.
    I have tried it in a different computer, with a different OS, etc., but the problem is the same .... after i install PcSuite, the problems begin.
    Lately, i have noticed it doesn't affect only my bluetooth mouse, but bluetooth in general, for example: while transfering file between 2 pc, if i have nokia pcsuite installed, there is a chance that the transfer fails.
    There is something wrong with PcSuite's bluetooth driver.
    Thank you for clicking on the Green button with the white Star for Kudos!!

    I have exactly the same problem: my Logitech MX Revolution mouse lags badly whenever PC Suite is running. I am using PC Suite version 6.85.14.1 via both Bluetooth and USB cable to connect to my Nokia 6300.
    I can confirm that if 'ServiceLayer.exe' is running in Task Manager (it starts several other executables as well) then the problem occurs.
    If I kill ServiceLayer.exe the problem is solved, but do anything in Explorer and it restarts itself with associated programs and problem is back - even if it is set to 'Manual' in services.msc.
    If I disable ServiceLayer.exe and manually stop the service in services.msc the problem is solved but PCSuite won't work of course, so this makes it impossible to run PCSuite normally - I have to disable and re-enable services.
    I have written two cmd files to disable the service, and rename the ServiceLayer.exe to something else (for some reason it was starting up again even if disabled in services.msc: it's very tenacious), and vice-versa, but OMG what an ugly solution!!
    This shell integration needs to be optional: the program should be able to start without all this grief!
    el
    Message Edited by eloquentloser on 10-Feb-2008 07:06 AM

  • TS4562 Cant connect Bluetooth keyboard and Bluetooth mouse to iPad Air

    When i have a Bluetooth keyboard connected to Ipad then i try to connect Bluetooth mouse to Ipad it disconnects the Bluetooth keyboard how do i use both devices?
    I am trying to connect them to a Ipad Air

    Connecting a mouse to an iPad is NOT supported.
    Barry

  • CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

    Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue? 
    Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

    Hi,
    According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
    Roger Lu
    TechNet Community Support

  • Keyboard, Trackpad, and Bluetooth mouse stop working

    My powerbook G4 1.67  keyboard and trackpad stop working after a few minutes of use.  Useing an extermal keyboard or mouse does not help.  the caps lock light does not come on either.  I force quit by holding the power button down. Fails each time

    Please use Apple Troubleshooting wireless mouse and keyboard issues located at http://support.apple.com/kb/ts3048

  • Imac 27 in and bluetooth mouse and keyboard with windows

    Mouse and key board will not work with windows? Is there something i can download to fix this. If i boot up in widows i have to go to a wired keyboard and mouse.

    I forgot to add im running windows 7 pro with bootcamp.

  • E90 and Bluetooth V470 mouse Logitech

    Hello
    Phone model
    click this *#0000#
    400.34.93
    21.04-2009
    RA-6
    Nokia E90 (02)
    you must put password exampe zero=0 or two zero=00 in E90.
    but you have BT mouse hoy you click 0 or 00 example.
    how can take off bluetooth password. is it posible.
    Nokia's own SU-8W.
    http://www.allaboutsymbian.com/features/item/How_t​o_Use_a_Bluetooth_keyboard_with_your_smartphone.ph​...
    keybord like this working good my phone.
    mouse V470 is new and new battery.
    E90 phone find mouse this name.
    Bluetooth Laser Travel Mouse
    I push enter
    now must put password enter is not posible
    I put one zero 0
    try to click mouse
    E90 say not posible or something.
    please help

    EDIT
    Hello
    nokia E90 and bluetooth mouse V470 is now pair. ok.
    I put passcode 0000 (four zeros)
    but.
    when I start internet connection and open web brozer ( nokia or opera version).
    mouse cursor dont move if you try move your mouse.
    any ideas.

  • Kensington Bluetooth Mouse Problem With 10.4.3

    After updating to 10.4.3, which updated bluetooth from 1.6 to 1.66, Kensington Mouseworks 2.8 no longer works with any of my Kensington bluetooth mice. A Kensington USB mouse works fine.
    Neither Apple nor Kensington was able to resolve this. Any ideas how to fix this until Kensington updates their drivers ?

    Original message was to Kensington:
    I can set up my device - discoverable - pairing and so on, but cannot get to the settings - fast, slow, scrolling, chording, etc. As a matter of fact when I select mouseworks under my system prefrences I get a window saying that there are no Kensington pointing devices found, but yet I'm using the device. The tracking speed of the cursor is uncontrollable at times. I am running OSX 10.4.3. Any help would be appreciated, otherwise I render this mouse to have a mind of it's own and not too useful to me.
    Their reply:
    Thank you for contacting Kensington Technical Support.
    As per the latest update from the concerned department, it has been observed that there are few compatibility issues between Mouseworks software and Bluetooth mouse on Mac OS X 10.4.3. Unfortunately, you are facing the same issue.
    However, it has been proved that the issue is not with Kensington software and Apple is working towards releasing a patch for this.
    Any solutions to date would be of great help.

  • IOGear Bluetooth Mouse won't pair

    Hello!
    I bought an iogear bluetooth mouse and am trying to use it with my Powerbook 1.67 dual layer.
    What happens is I set up device, choose mouse, and "Bluetooth Mouse" shows up in the list. I choose that. Next the setup assistant tells me it will try an empty passcode and of course fails.
    The setup assistant never asks me for a pin code, and then tells me to make sure I set the proper code on my mouse
    Anyone have any clue how I can get SUA to let me enter "1234" as my pin code?
    Steve

    I figured it out. I had to pair as "other device" not a "mouse" and then on the discovery screen I clicked "passkey options" and chose "use a specific passkey" which then on the following page prompted me, to which I entered "1234"

  • Touchpad and trackpoint problems, especially when resuming from sleep

    I am having persistent problems with the touchpad and trackpoint on my L530.  I prefer to use the trackpoint usually, and found that the touchpad was super-sensitive and caused the cursor to jump around during normal (touch) typing so I disabled the touchpad.  Next time the thinkpad resumed from sleep mode, the mouse was frozen.  Nothing would reactivate it.  I had to switch user, which temporarily fixed it, and then reactivate the touchpad. 
    If I try and change trackpad settings at any time other than directly after a reboot, the settings are greyed-out and I can't touch them. Right now, both trackpad and trackpoint are completely dead again, but I've plugged in a USB mouse and that seems to be working, so I've given up fiddling with it.  This will be a pain when I'm moving around with the laptop though!
    The OS is Windows 7.  Yesterday I went looking for the most recent driver, uninstalled the existing one (as per guidance) and installed the new driver.  No luck.  
    I've heard this is a common problem and apparently installing a generic driver works, but I'm not completely sure what to use.  Anyone know? 
    Oh, and I'm not sure if this is related, but quite often when I resume from sleep mode the keyboard is also dead.  However, if I switch user it comes back to life.  So annoying but not the end of the world.

    Thanks for posting this information in this forum. You just saved me a couple thousand dollars!
    Based on my experience if you want to get this problem fixed as soon as possible you need to do the following:
    1. www.apple.com/feedback
    2. Post a video of the problem on www.youtube.com
    3. Send www.apple.com/feedback a link to the video on youtube.
    4. Encourage others to visit your youtube video and to post their own.
    Good luck!

  • The touchpad and trackpoint don't work on X220

    All greetings! I from Russia, therefore am sorry for my bad English. On my X220 (4290RV4) the touchpad and trackpoint have ceased to work, but the keyboard and fpr works normally. I tried different versions of BIOS and drivers, reinstalled windows, but it is ineffectual

    hey Solo,
    try removing the ultranav/mouse drivers from your unit via Device Manager.
    go to http://support.lenovo.com ; download the latest ultranav/mouse drivers for your unit and install.
    try again.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

Maybe you are looking for

  • I think my iPod is well and truly stuffed

    Hello all I need some serious help with my iPod I have a 20GB iPod photo which was working supremely while I was in Europe and I got home and downloaded some more music and also downloaded the newest version of iTunes which then proceeded to wipe my

  • Problem opening doc & PDF's

    A small but not insignificant problem, compiled a project (fine) placed on the server and the staff access it via a mapped drive or shortcut to said server, all ok apart from one computer which will not open any documents or pdf files, the prompt com

  • How to load movie clip internal in .fla file

    Hi - How do I load a movie clip inside a .fla file?........I know the script to load a .swf file but I do not know the script to load a movie clip (New symbo l= movie clip) made in the same .fla file. I have a series of movie clips I woud like to loa

  • Why vi dll creates ini file on its own?

    Hello, I have built my LabVIEW project as shared library (dll).  My system looks like this: main exe file loads dll, and this dll loads VI dll. With LabVIEW 2011 it was ok, but when I switched to 2013 my VI dll started to write into main exe ini file

  • Can organizer catalalogue be downgraded

    I wonder if a catalogue created with organizer in PSE10 can be used with PSE7 for sharing with family members who have not upgraded to current. I know that it works other way around.