Tracks jump part way through both in itunes and ipod

I have an itunes library, version 7.1.1 (5), that is almost 100Gb in size. Most of the cds I imported over the past 2 years and have never had a problem until recently.
Tracks have started jumping to the next track part way through both in itunes and on my new ipod. These tracks used to play with no problem so it has nothing to do with the actual cd import but something that has happened since.
The library is stored on an external LACE drive and they have always been there since import.
It doesn't happen to all tracks but happens very freqently. It is very frustrating and I'd appreciate any advice please.
Regards,
Mike

I'm curious to find if you've resolved this issue. I have the same problem with my ipod and itunes as well, and have had a hard time finding any support on this issue. Certain songs in itunes and on my ipod either won't play or skip to the next song after about 15 seconds.
I've seen recommendations for people who are having this issue on their ipods, but their songs in itunes seem to be working okay. Several of my songs (purchased and imported) skip on my computer and on my ipod.

Similar Messages

  • Importing photos from Iphone to computer and there is a message it is having trouble with this part way through on a phot and then stops

    I am having trouble importing photos onto my Mac book Pro from my Iphone...in the middle of the import I get a message stating that they are having trouble with one of my photos and then stops importing...want to save photos and clear the phone storage

    Hello cindysc
    Try importing the photos using Image Capture and see if that changes things. If it still gets stuck, try and email the photo to your self and download it that way.
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Regards,
    -Norm G.

  • HT201210 my ipod will not shut down both itunes and ipod have frozen. I have restarted but no change

    While trying to update the ipod both the itunes and ipod have frozen and I am unable to fix it \. I have restarted the both and let run for 8 hours with no results.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After synchronising, the iPod song starts part way through the song. Same song starts fine on iTunes. Wassup?

    Why is it that after I synchronise my iPod with iTunes the track on my iPod starts part way through the song? Only happens with the occasional song and is not widespread. The iTunes song on my laptop is fine - when I play it from iTunes it starts from the start.
    Any help would be very welcome

    You're in the exact same situation as me, and I can't seem to find help with this problem.

  • IPod classic 160Gb 2009 starts tracks part way through

    I restored my iPod a couple of months ago through iTunes so it's on the latest version available and all, and since then it's developed a minor but very annoying quirk of starting music tracks part way through when I skip to them - particularly noticable on playlists. What it's actually doing is resuming playback from points where I skipped them on a previous listen. Pretty much what you'd expect an audiobook to do, starting from where you left off. Which is great for audiobooks, but not what I want for my music tracks. I can't find any settings for turning this 'feature' off on the iPod or through iTunes, and I'm not sure it's supposed to be applied to music tracks anyway.
    Before I resort to wiping the iPod and starting from scratch to see if that fixes the problem (because it takes hours to transfer all my music over again), does anyone else have any experience with this parrticular problem and know of a solution?
    Thanks!

    I've managed to fix this myself. Selecting all tracks from within iTunes, then right-clicking and hitting 'get info' and setting the 'remember playback postion' to 'no' for all mp3s has sorted the problem out. This would perhaps benefit from being an option in the iPod settings in addition to individual track settings so it's a bit more intuitive to find for those of us who aren't regular iTunes users!
    The real mystery is why it was turned on for them all in the first place. From what I can gather it's something you're supposed to enable per track yourself, and so off by default. I certainly didn't turn it on, so I'm guessing it was a minor glitch in the Matrix.

  • HT204370 I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    I rented a movie from the Itunes store and started watching it, but my computer jammed part way through, and now i can't find the movie to continue playing it, where can i find it?

    Hi brett242424,
    Welcome to the Support Communities!
    The movie would be in your iTunes library, in the Movies application.  However, if the rental period has expired, you may need to contact the iTunes Store Support about your situation:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • I have just tried to upgrade to the latest version of itunes, and my ipad was connected to my computer at the time. The upgrade crashed part way through. I now cannot start itunes as it says MSVCR80.dll is missing. Anyone got any ideas?

    I was upgrading to the latest version of itunes, and my new ipad mini was connected to my computer at the same time, try to sync for the first time. The upgrade crashed part way through, and now itunes won't load and I get an error message saying MSVCR80.dll is missing. How do I do about reinstalling this file?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99792)

  • Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    Hi..can anyone help? Songs on my itunes are not playing to the end? They cut off part way through a song. Its not on all the songs but lots of them? thanks

    A couple of months ago, I went to the Apple Store to try and sort this problem out. I was told that I was not playing my songs out of an actual music library. I created a library and loaded all of my songs, movies, etc. onto it. I had found that when I synced my songs from the new library onto my itouch, the songs no longer stopped in odd spots or bled into each other. To ensure that most of my songs had been fixed, I played the ones that were the most problematic. Fortunately, the songs play all the way through without any interruption. So far, I have not encountered the same problems that I had posted in my question. I apologize for not knowing the fellow's name who helped me with my iTouch at the Apple Store, but I would like to say how thankful and happy I am now that my iTouch no longer skips to the next song.
    I know that other people have had this same issue with their iPods. If you encounter your music not playing correctly, I would suggest that making a new library and  loading all of your music into the new one may help correct the problem. I hope that this helps.

  • I down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    i down loaded a rental movie and stopped part way through . i turned the computer on and off and when i went back on itunes it didnt show up on the rental playlist and movie playlist.how can i get the movie back?

    Unless it has recently changed you can only watch rentals on the device or mac you rent them on.

  • I have a new PC and I tunes had to be added from my old PC to my new one, now some of my music is only playing half way through on both my PC and IPOD Classic

    I have a new PC and I had to transfer my I tunes from my old PC to my new PC and now some of the songs only play half way through on both my PC and Ipod Classic
    How can this be fixed, I noticed also that on I tunes on my PC before purchasing a song I listen to it and now it is only playing like 4 seconds of the song and I have opened up the URL and it still won't work correctly. PLEASE HELP

    Are these songs that you purchased from the iTunes Store or imported from outside of iTunes? If there are iTunes purchases, delete them from your main iTunes library and redownload them again at no cost via iCloud.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    B-rock

  • Embeded Flash files stop loading part way through after update to 10.2

    Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.

    Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
    Let me know,
    Thanks,
    eidnolb

  • HT1583 sound stops part way through on burned idvd, but ok on computer edit.

    Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
    is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
    be disc failure.
    Appreciate any comments please

    Hi
    FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
    In iDVD - Before Burning the DVD DO !
    Save as a DiskImage
    Double click on this .img icon
    test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
    THEN
    • DVD Brand - matters
    • DVD type used - matters
    • BURN SPEED - matters
    • Audio file format - matters
    WHAT did You use
    I only use
    - Verbatim
    - DVD-R SL
    - x2 max x4 - Best / High - IS NOT BEST
    - .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
    Yours Bengt W

  • Recovery mode crashed part way through

    I installed an update on my iphone 5 this morning, and then it showed me the screen with the itunes app and the plug in cord.  I plug it into my desktop and it goes into recovery mode but crashed part way through. HELP!

    Hi JILLYPAW,
    I apologize, I'm a bit unclear on where you currently stand with your issue. If, after the crash during the recovery mode restore, your iPhone is now no longer responding or starting up, then you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If it is responding but you are unable to update or it has gone back into Recovery mode, then this article may be more useful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    And if you are able to start the restore but it gives you an error message partway through, then you should take a look at this article:
    Apple Support: Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Regards,
    - Brenden

  • Restored today, but then downloaded and installed ios 7. on install restore point doesn't exist and only half a restore part way through ios 7, which has lost most stuff.  previous restore points dont seem to exist either only back in April

    I have restored earlier today and got a time confirmation afterwards.
    Have just installed IOS 7 to find that the restore point doesn't now exist according to itunes.
    The phone has made its own restore point part way through IOS 7 installation but half the stuff is missing.
    Help !!!
    I had loads of very important stuff on the phone.  But the only restore points now available are back in April

    I also have found out that having updated itunes that this has reverted to a previous setting of syncing my music!!
    What on eart is going on Apple ???
    This is really poor and not the firtst time these things have happened.  Billions of dollars and poor quality !!!

  • CS6 - how do I adjust audio level part way through a clip using audio mixer?

    Hi there - I'm using the trial version of CS6 and will almost certainly buy it. I've watched lots of the video tutorials but am stumped on this simple issue!
    1. Let's say I have a clip and I want to increase the audio level part way through a clip.
    2. In Example A below I have added a keyframe at the point I want to change the volume.
    3. I then went to the audio mixer and increased the volume level using the slider. But nothing changed on the clip.
    4. The only way I could get it to work was to add more key frames after the first one (see Example B) and increase the volume on the timeline.
    5. This is very fiddly and I'd prefer to be able to do this using the audio mixer. Is this possible?
    Example A                                                                                                              Example B

    With the proper Send settings (Write, Touch, etc., as Craig mentions), you can easily ride the Volume in real-time. I like to add a Numbered Marker to where I want the adjustment to begin, hold, and then end, so that I have several visual clues, besides the aural ones.
    I also have found that the default setting for Audio>Minimal Time Thinning Interval places too many Keyframes on the Track, so I have bumped that up in Preferences.
    Also remember, the Keyframes added with Audio Mixer are Track Keyframes, and not Clip Keyframes. If you were to remove all Clips, those Keyframes would still be there, and would affect any Clips that you added back.
    Good luck,
    Hunt

Maybe you are looking for

  • Problem in Creating a System through WEB AS

    Hi ,      I created a System (ECC 6.0) in Portal and testing it through WEB AS.I'am able to "Test the connection for Connectors" but when coming to test WEBAS am getting an error "<b>Test Details: The test consists of the following steps: 1. Check th

  • My Adobe Media Encoder CC keeps crashing - can anyone help?

    Every time I open Adobe Media Encoder, it begins the start-up and then crashes before it opens the application.... any help? Not sure if this is relevant but, it seems to crash while loading "ExporterQuickTimeHost.pm"

  • Has anyone had issues with the accelerometer in the iPhone 6 plus?

    II've had issues with the accelerometer in the iPhone 6 plus. I went from landscape mode and then went into podcast app. I went to the search tab and this is the keyboard that came up: This isn't the only issue with the accelerometer though. I've als

  • Unable to Active the Transformations..?

    Hi All I'm Unable to Activate the Transformations.,Rule (target field: ZPRC): No source unit assigned can u solve Thanks in adv

  • Running  .class file from autoexec.bat (in Windows Xp environment)

    How to run a .class file from autoexec.bat file. I have WinXP installed on my PC. I tried the solution given by Forum memebers but they didn't work. after setting the classpath i wrote java -cp simple in autoexec.bat , but results were not satisfacto