Tracks reverting to pre-mix levels after setting them lower
After recording a tune, I go to mixdown and naturally adjust the levels of each track. Since day 1 I keep running into the same problem. Tracks on which I adjust the levels lower automatically revert to pre-adjustment levels, seemingly at the same point in the piece. How can I simply set a track's level during mixdown and have it stay where I put it?
Thanks
It sounds like it's most likely one of two things...
There's the obvious volume automation, but I would imagine that's really not the kind of thing that can be easily added by mistake.
So my guess would be that there is MIDI controller data (CC#7) being written to the audio regions on those tracks, perhaps from a controller...?
select a track, and open your Events window, and look for controller #7. If you see a lot of that data listed there, select one of the volume data lines in the list, then use the "Select similar" command. This will select ALL volume data for that track, and then hit delete.
See if that's what's going on....
Similar Messages
-
Folio versions...why can't we set them lower?
Hi there,
Just wondering why, once having set the viewer version in your folio 'up' (say to 30) you can't lower it (say to 28). We can't be the only people that have momentarily lost track of the viewer versions of our apps, and found ourselves having to recreate folios using a lower version number?! It's so easy to increase the version number (with no scary warning reminding you of the possible incompatibility)...
Given advice I've received here (but haven't found in documentation) that there's 'no need' to set your folios to a version higher than v26 (is that correct?) I almost feel like this option should either not be available, or hidden away somewhere, if it really is impossible to give people the ability to downgrade as well as upgrade. Are the any plans to make this more flexible, or harder to mess up?
Thanks,
TobyCopied from other thread...
The default viewer version (which I think of as the "folio format") is v26. If you leave the default setting selected, you should not have any incompatibility problems because while the viewer version changes with each release, the folio format hasn't changed since v26. This is described in a couple different notes on this help page, but that's a lot of information to wade through.
Unfortunately, it's easy for people to get tripped up. When you see "viewer version" in the UI, it's reasonable to think that you're missing out on certain features if you select an older format instead of the newest one. At the same time, guidance from a number of different sources indicates that the viewer version needs to be equal to or smaller than the app version, or your users will be prompted to update their apps. Newer apps can always read older folios, but older apps cannot read newer folios.
It would be great if you could select a lower viewer version after you realize your mistake, but that would require more engineering effort than the team wants to spend. It's a similar issue with changing the article format. If you decide you want to switch an article from PNG to PDF, for example, you have to delete and re-create the article instead of changing the setting. -
Pre Mastering/levels on final mix
I am fairly new to LogicPro. My levels in PT were pretty good on final mixes..I have been messin' around for several weeks with Logics master plugs(adaptive limiter/compressors) on 1-2 but levels seem still pretty low. Any suggestions to boost it up without destroying the mix? also would i put a limiter before or after a compressor on 1-2 ?Thank you
How are your individual tracks? Is the mix level itself (not the mastering level) satisfactory?
All depending on the song, I usually use the Multipressor/EQ/Adaptive Limiter (usually in this order, but not always at the same time). Sometimes if it fitting, I will stick in the Stereo Spreader in the chain. Mind you, I will often A/B the results to see if the plug-ins made it sound better or just louder (if it's just louder, I'll take it out).
Check your settings on the Adaptive Limiter. You may be able to squeeze a bit more gain out of your final result without making a sonically mushy brick. Like I stated earlier, I also add in the Multipressor at times as it can bring out a little sparkle (or oomph, depending on the sound) in the mix when used judiciously. Mind you, if you use it, pay attention to the bands you are working on. Otherwise, you will wind up destroying the mix.
jord -
Anyone know a workaround for when TextEdit reverts to Helvetica 12 even after you set the new default to say Verdana 14 every time your drop an image into an RTFD? Kind of defeats the purpose! Is there a way around this? THANKS!
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
-
I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?
If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
Time Display reverts back to automatic time zone setting after I set it to manual
Time Display reverts back to automatic time zone setting after I set it to manual
That's probably an issue with '''cookies''' rather than with clearing browsing history. Are you clearing your cookies, too?
If you want to continue clearing your cookies when Firefox closes, look for an extension that will save the cookie for a preference like that one
[https://addons.mozilla.org/en-US/firefox/search/?q=cookies&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced= AMO search for "cookies" extensions] -
Adobe Premier Pro CC won't write tracks in Audio Clip Mixer
Hi!
For some reason the Audio Clip Mixer controls aren't functioning after I "write" the track in mix down. The track reverts to "touch" upon play back, but nothing took hold. Any suggestions? Is there something I need to enable first to make the "Write" function...function?
thank you!
ScottYou probably mean the Audio Track Mixer.
If after writing it reverts to Latch that is a setting you can turn off in the panel menu.
Did you add a keyframe to start writing. -
Nike+ workout tracks not showing up on iPhone after sync
I have a bunch of the "workout" mixes you can get from iTunes (Increase Your Speed, Treadmill, etc), and with each of those sets, one track is a continuous mix of all of the songs. That one track is what I want to sync with my iPhone.
According to iTunes, the track is on the iPhone. When I click the little triangle next to the iPhone icon in iTunes, I see that the track is on the iPhone, but when I try and find it on the iPhone, it's not there. I have tried creating a playlist and also searching for it by name.
Any ideas why those track are not showing up? Thanks!I was having the same issue too. I was hoping that apple will address this issue with a SW update or at least someone from apple would be kind enough to answer this thread.
After researching for a couple days I found a solution. It's not the most efficient, but it works. You'll need a CD-R or CD-RW with this method. The trick is you need to convert m4p file format to mpa or mp3 file format.
You can follow the following steps:
1. Open iTunes
2. Create a New Playlist: File -> New Playlist
3. Drag the song(s) to the playlist you just created. Note: Depending on the file size you might only be able to burn just 1 song at a time
4. Insert a Blank CD to your disk drive.
5. Right click on the playlist then click "Burn Playlist to Disk." Then click burn. Make sure the Disc format is set to Audio CD.
6. Once the disc is finished, click on the CD in the device section in iTunes. Right click the song and click "Create AAC Version." This will create a .mpa file into your iTunes.
7. Copy that file to your iPhone and you're golden
Hope this helps guys. I know it's not the most elegant solution, but it works and now you can workout with those tunes. I know I've been quite frustrated because my tracks didn't show up, hopefully the new SW update will fix this.
I would appreciate any apple genius' solution that is more efficient as well.
Cheers -
I have a project with stereo music and mono announce track "left filled" onto the right also.
After encoding to DVD, some of the music sections seem to dissapear. All the music is softer than it should be.
any ideas???
thanksIn the Audio Mixer Panel, what are the average Levels of your individual Tracks? While I mix to the actual Audio, and only use Levels to point out problems, you might gain a clue there.
Also, is this a straight Mixdown to a Stereo Master, or do you have any Track Mapping used?
I've yet to encounter any noticeable difference between my PrPro Audio and a burned DVD.
Good luck,
Hunt -
"No bootable device --- insert boot disk and press any key" after setting up Bootcamp
Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 119.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 875.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS FusionDrive *975.5 GB disk2
Logical Volume on disk0s2, disk1s2
FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
=========================================================
Name: Fusion
Status: Online
Size: 1190201270272 B (1.2 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 255716540416 B (255.7 GB)
|
+-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 934484729856 B (934.5 GB)
|
+-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
Disk: disk2
Status: Online
Size (Total): 1185508581376 B (1.2 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion HD
Volume Name: Fusion HD
Content Hint: Apple_HFS
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 255.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 934.5 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion HD *1.2 TB disk2 -
BPM Worklist Problem After Setting Frontend Host and Port
Hi all,
I was following the EDG for SOA 11.1.1.5 and was encountering a problem with the BPM Worklist after setting the Frontend Host and Port. We have a topology that includes a load balancer that terminates SSL, two OHS instances, and two SOA instances on separate VMs. When BPM Worklist was loading, it was calling webservices internally through the load balancer, but WebLogic was expecting them as http://. It was not able to resolve the HTTPS port that was being sent from the load balancer through the 80 to 443 redirect.
What the current EDG does not tell you, is that you have to also turn on "Enable Weblogic Plug-In" for WebLogic to use the OHS plug-in. I did it at the domain level, as all traffic will go through the load balancer. This essentially tells WebLogic that all URLs are https://
Here is an exerpt from the SOA.out log file:
<Sep 8, 2011 9:32:06 PM PDT> <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
Caused By: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
What it is also missing, is that you should also set the SOA Infrastructure ServerURL mbean for the load balancer, to match the frontend host and port. Do this through Fusion Middleware Contol. Otherwise, you could encounter URL mismatches.
I hope this helps someone else.
I've asked Oracle to add this to the EDG for SOA. It's in the IDM guide, but not in any other EDGs.Thanks Josh. It helped me infact in 11.1.1.4 Enable Weblogic Plug-In is not required. But 11.1.1.5 I thing it is mandatory. Oracle should have a clear documentaion.
-
Screen goes back to lowest brightness level after wakeup
Hello All,
My late 2002 Titanium Powerbook screen sometimes goes to the lowest brightness level after wakeup when the lid has been closed. I manually have to reset the level again. Does anyone know why the level is not staying to my original setting? Do you think there's a corruption in the wakeup mode function? Just a hunch, though. Any input is much appreciated. Have a great day.
Jack
iMac G5 20, 2 GHz, 1.5 GB RAM Mac OS X (10.4.8) Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8Hi TJK,
I just did a permission repair with disk utility to eliminate any other issues. I'll create a new user and give your suggestion a try. It makes sense since I recently got this machine used from another owner. I've nothing to lose, I suppose.
While I'm here, would a clean install eliminate the issue I'm having? I'm not too excited about having his name on my Home folder permanently, anyway. I've no problem doing a clean install, and I've got the original install disks.
Best regards,
Jack
iMac G5 20, 2 GHz, 1.5 GB RAM Mac OS X (10.4.8) Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8 -
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh2785222 wrote:
Hi All,
Even after set Mo:Security and HR:Security,user not able to restrict require Inventory Org.
Both the profile option have set at responsibility level.
Reagrds,
Sandesh
Hi Sandesh,
First note that HR:Security Is for HRMS module for restricting data for respective OUs
MO:Security is for other Modules such as Inv, PO, AR, AP etc., for restricting data
Change the inventory Org to the one you want and then query data...
Hope it helps.
Regards,
Shahzad.H.Magsi -
Is there a way to generate pink noise in logic to calibrate the mixing level and if so how does one do it properly? I want to calibrate my mixing level with a c-weighted meter. Thanks.
Here's how it ties:
Much of this is backed by different sources and tests. The magic number you see is the avg foreground listening level where it is not too loud, not too quiet - one study I remember involved ( memory may fail ) a movie in a theater calibrated to this ( was it a Lucasfilm? ). This was attended by many people of different ages from different relevant industries. Afterwards, attendants were asked how the levels were, too soft, right, too loud - the result was a resounding right.
Now, transfer this into the sound creation process. If you know the level most people agree is the proper foreground listening level... you should probably spend a good time monitoring at that level ( you may do so already ), since ( Fletcher Munson ) our ears respond differently to frequencies at different avg levels. Your mixes will probably transfer better. Also, this allows you to set your levels appropriately when creating with a DAW since many of our digital devices have ceilings ( 0dB ). Then, you convince yourself to focus on your avg level instead of squashing the p*ss out of your mix - you just remove that component and focus on a good mix with proper dynamics and ample headroom instead of trying to get an insanely "loud" CD.
That's that for starters,
J -
[SOLVED]Pulseaudio & Gnome - Mixer levels, S/PDIF
After years of keeping as far away as possible from pulseaudio, I thought I'd give it another try, well, this is my story:
(... I deceided to cut my rant, just the facts:)
After installing pulseaudio, everything seemed to be working fine, except that the S/PDIF channel always became un-muted upon login to gnome.
I could mute it manually via alsamixer, and store everything just fine with alsactl, and all my mixer values were restored on reboot just fine.
S/PDIF stays output remains off right up until gnome loads. I presume that pulseaudio does 'something' to my mixer settings, but I have not been able to determine what that 'something' actually is.
Even worse, I installed both pavucontrol and parprefs, and after literally just clicking through the options in pavucontroll (specifically the output profiles) I now have no proper output devices, just 'dummy devices' and sound no longer works.
I deleted ~\.config\pulse and rebooted, and it still is misconfigured.
How can I tell pa to leave my alsa/hw mixer levels the hell alone, this is assuming I can get it back to how it was before I started messing with pavucontrol...
Last edited by hungerfish (2015-01-17 01:48:28)> ~ $ pacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_08.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xd3480000 irq 23"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:08.0"
sysfs.path = "/devices/pci0000:00/0000:00:08.0/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0d94"
device.product.name = "MCP89 High Definition Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
output:analog-surround-40: Analog Surround 4.0 Output (priority 700, available: unknown)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI) Output (priority 5200, available: unknown)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5260, available: unknown)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI) Output (priority 100, available: unknown)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 160, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI) Output (priority 5200, available: unknown)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5260, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI) Output (priority 100, available: unknown)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 160, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_08.0.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_08.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_08.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input: Analog Input (priority 10000, latency offset 0 usec, available: unknown)
properties:
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-output: Analog Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
Maybe you are looking for
-
Iphone voice memos does not stay open
iphone voice memos does not stay open
-
Hi All, Can we go for approach of developing custom IDOC's? where in our scenarios are getting files from thrid party and updating data in file into ECC. Approach towards Custom IDOC's is for error monitoring and recprocessing. Would request your in
-
Hyperlink NOT working in "X" but work fine with 9.5.0
Hi, we create PDF Documents with Office 2010 SP1 (32bit) on Windows 7 SP1 (x64) and we use absolut Hyperlinks within Word 2010. All the Links are working fine within the word document. Now the users can´t use the hyperlink within the pdf if they use
-
Issue in mapping the same source and target fields
Hi All, I am working on PI 7.0 and currently I am connecting to PI 7.0 via citrix desktop . Problem here is : in the mapping , direct mapping option that is available to map the same source and target fields is disabled . I do know that this is due t
-
PR and PO creation in ECC from SRM 7.0
Hi everyone, I have a pair of doubt. We are planning to upgrade SRM 3.0 to SRM 7.0 with ECC 6.0 ep 4 in a classic scenario. My doubts are: 1.- Can we create a PR from a SC using PI by standard or is the same as the previous version (using RFC)?? 2.-