Tracks skipping within the track in iTunes 11.1.5, Windows 7

I am currently having trouble with the tracks in my iTunes library skipping within the track as it streams, is there something I can do to resolve this?
Initially I thought it was just the songs that I bought through iTunes that were having issues but it seems to be any of the songs I listen to that is having this issue. Even if it is something I tried to reimport from CD. I have only been having this issue over the last two to three weeks.
I have Windows 7 HP and iTunes 11.1.5.
If this has been discussed before my apologies.

Hi The Frazzled Shinigami,
Thanks for visiting Apple Support Communities.
I recommend the troubleshooting steps in this article if all songs are skipping when you play them in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
https://support.apple.com/kb/TS1362
Regards,
Jeremy

Similar Messages

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
However, you can add effects from the predefined audio units.
You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

How can I split my Dj mix into separate tracks and export the tracks

How can I split my Dj mix into separate tracks and export the tracks. I'm trying to burn my Dj mix to cd and I don't want it to be one long track.

Henryfrommo wrote:
How can I split my Dj mix into separate tracks and export the tracks.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

Strange Problem: 25 seconds into track, skips to the end?

I'm having a weird problem where, 25 seconds into the track, iTunes skips to the end of the track, and my iPod just stops playing it (like I paused it without it being paused). What strikes me as really odd about it is that it's only one two tracks. I haven't found another one where it does the same thing. I downloaded the mp3s from eMusic, and they are both sequential songs in that album. I've tried re-downloading both of them, but that didn't work. I will also note that the files play just fine in Windows Media Player and Media Player Classic, leading me to believe it's an iTunes/iPod specific problem. Anyone have any idea?

Restore the iPod and reload the songs.
See this: Restoring the 5th generation iPod (iPod with video).

How do I boost the volume of a track, and a section within the track?

Thanks for any help.
I'm fairly new to logic and I'm trying to figure out how to boost the volume of a track. I know how to adjust it in the mix, but I have some imported audio files that still aren't loud enough overall. Is there a way to "boost" the volume of the track, so that it adds dB levels to the track overall? Not just turning the level of the track up, but actually boosting the volume of what's in the track? I turn it all the way up to 6.0, and it still isn't loud enough... I'd rather not have to double the track.
Also, is there a way to boost the volume of certain sections of the track, besides using automation?
Any help is greatly appreciated!!
Chris

First, welcome to the Apple Discussion Forums!
Try this. Double click on the track and the Sample Editor will come up. Select the section you want to boost and select Functions -> Change Gain. But keep in mind, boosting the signal will also boost the noise.
Hope this helps.

Audio tracks locked yet the track still gets bumped out

I'm editing a music video. I put the audio track for the song onto the first/second line of the timeline and locked the tracks. Then I added a video clip and the audio for that bumped the locked audio out of the other lines! It's never done that for me before, how do I get it to QUIT?

Hi,
Assuming that you really locked the audio track (see the diagonal lines running all along the locked track):
!http://i533.photobucket.com/albums/ee340/gogiangigo/lockedaudio.jpg!
you might be experiencing some bizarre behavior, which [trashing the preferences|http://www.digitalrebellion.com/pref_man.htm] could fix.
Try that,
G.

How do I make fades in MIDI tracks without recording the track first

I have "RTFM";s and spent 2 hours at an Apple store with their resident "Logic Pro specialist" who was also unable to use the transform window to, basically, make [assign] a tool for, in this case, fading every dotted quarter note in the whole song, there must be a Widget wiz out there who could make one that could be used as a dedicated tool for adjustable MIDI fades. Yes, I could bounce[record]the track and edit the Audio file but almost all options as far as tempo, key,etc. are lost-wasn't this the reason for MIDI as opposed to analog? no, the degradation of copy/cut in analog sound opposed to digital mode is the reason, it's a pity no one from Apple seems to care about their own products enough to read these forums, stuck in traffic probably, crying all the way to the Bank. Thanks in advance for all the help!

Hi,
From what I read in your post, there is a MIDI performance which contains dotted quarter notes, which you would like to fade out before the note ends. Am I correct?
What I have done in the past, and I do this to an AUDIO track... is to use a gate. I set it so that it closes x milliseconds aftdr opening, and closes at a rate of X milliseconds.
So I recommend you render the dotted quarter notes and use an audio gate to accomplish this task.
Or, you can spend hours trying to do it in MIDI-land. And fail. This will get you there in about 3-5 minutes of fiddling.
I have tried before to do it with a MIDI gate, but... they are not as flexible or good-sounding as the audio one.
Of course, you'll end up "losing" your ability to change the tempo etc... BUT, you can always keep the Midi performance, and re-print a version at a new tempo if that is what you need to do. I do this alll the time, with one caveat: I find the key and tempo FIRST, before doign the basic tracking. Then that is no longer an issue. But you can do it any other way you like.
Cheers

After editing i can hear effects over tracks but not the tracks themselves?

after editing and saving as a garage band file i can hear the first two tracks in their entirety, but not the other 8 (except for the reverb over them). if i kill the reverb over these tracks then only silence remains. input, output and monitoring options are identical for all ten tracks. all my edits are still there, including automated volume and pan. please help

Hello, I am having the same problem. With some exceptions (and this is what's throwing me off) I can hear reverb and echo on tracks but not tracks themselves. I have tried adding echo/reverb to some of the muted tracks and I can hear these effects fine. Yet I have 2 tracks without any effects at all and I can hear those ones fine (there are 12 tracks in all). Any help would be greatly appreciated as this is my senior project and I am due to present on Thursday, June 5.

What are the steps move iTunes from xp to windows 7

I need to move iTunes from xp to a a new windows 7 laptop. My iTunes lib is now on an external hd because of size.
How do I convert.
Do I download a new iTunes and the point to my external hd?
Any tips or help would be appreciated.
Art K

Thanks for your reply.
I went to this page on the Apple Support site: http://support.apple.com/kb/HT1364
I followed its instructions and it didn't work. I tried it 5 or 6 times and then i took my PC to a shop and they tried it 5 or 6 times which cost me a fortune - and i still can't get it to work.
I've checked my iTunes preferences as you said and it is set to this:
D:\My Documents\My Music\iTunes\iTunes Music
I've checked both folders and i've noticed both have the same information in them ie: C>USERS>CHRISMAY>MYMUSIC>iTUNES has exactly the same in it as D>MYDOCUMENTS>MYMUSIC>iTUNES - So there's a Library.xml file in each folder and a Library.itl file in each folder and an Album Artwork file in each folder etc etc. So in effect the both iTunes folders have exactly the same files in them apart from the 'iTunes Music' folder which is only located on the D Drive as this is where i want all the music to be stored.
The reason for that was that i could only get iTunes to work with my original library by copying everything from my external back up onto the C Drive. So i don't know if having duplicate folders in both iTunes folders on the C & D drive's will be causing any of the problems or not ??
Is there any chance you know why my iTunes is working on my PC and allowing me to upload music to it but it won't let my 2x iPod's or my iPhone sync with it ? If so are there any solutions i could try before i smash them all up in a fit of rage or all my hair falls out?
Hope you can help................

Does anyone know how to correct the download for itunes error message 7 windows 193?

I'm getting error message 7 (windows 193) when I download new itunes update.

Try Troubleshooting issues with iTunes for Windows updates - MSVCR80

Is the Apple TV - iTune sync problem with Windows VISTA resolved yet?

I just bought Apple TV yesterday. Tried syncing with Vista Desktop. In exactly 2 minutes, ATV disappears, with few content synced up. Tried with XP laptop and it works. I see lot of discussion on this topic, but is there any real solution, other than returning it back?

This same exact thing is happening to me when I changed computers.
I had it working fine from my desktop, but I recently switched to a laptop and I now get the same sync issues.
I even restored my ATV to factory settings!
What gives?

ITunes mixes up the track order of songs within an album??

My iTunes mixes up the track order, and there is no way to specifically order it by track. i have even gone and individually marked each song as ie(2 of 12) but it still lists them in a random order. How can I make the songs fit in their original order? And none of that "click at the top to order it by artist, album, or time etc," because it doesn't click above track number.

If the songs are in a playlist open iTunes then click on the playlist. Click on the number column (extreme left). Click on the song you want to move and drag it to where you want it to be. Right click on the playlist name and select "Copy to play order". Connect your iPod, if you are updating automatically it will pick up the change. If you are updating manually then you connect first and when the iPod appears in the source list carry out the process above directly in the playlist on your iPod. Make sure neither Shuffle or Repeat are switched on in the playlist, either of those can prevent you reordering tracks.
If the tracks are out of order in the library try this, I found that it works for me. Right click at the top of any column in your iTunes library and choose **Track Number** from the list. Click at the top of this new column to sort it and after that click on the Album column. If you like you can then click on Artist, it will continue to hold the track order as well. Afterwards anything you import should follow this arrangement Artist>Album>Track Number within Album (you can hide the track number column when you've done if you don't want it cluttering up the view)

Itunes doesnt grab the track names from Cd's

It used to, but iTunes no longer gets the track names from a CD when I attemp to import. It recognizes the CD name, but not the individual songs. They show as "Track 01", "Track 02", etc... I then try to get "get track names for CD's" through iTunes and it says, "unable to connect to the CDDB server".
any help?

iTunes actually does not get the track names from the CDs themselves. iTunes instead connects through the Internet to the Gracenote CDDB server and gets the album and track information from there. So when you import a CD, your system needs to be connected to the Internet. If it's not, that's your problem.
If it is connected to the Internet, check your firewall(s) to make sure that that the CDDB site (gracenote.com, at least) is allowed in the firewall settings.
For more information, look for "gracenote" or "CDDB" in the iTunes Help.
Hope this helps.
PowerMac G5 DP 2GHz Mac OS X (10.4.3)

Skipping through chapters & tracks

i am a complete novice trying to author my first disc in dvd studio pro 3.0.2.
the disc has 4 tracks, some of which are divided into chapters. all navigation seems to be fine except for one thing. skipping forward through chapters with the "next" button is okay until i get to the last chapter in a track. from this point the "next" button doesn't do anything.
ideally, i would like to skip from the last chapter of one track to the first chapter / beginning of the next track. how can i do this ?
thanks for any help you can offer,
mark
PowerBook G4 15 Mac OS X (10.3.9) DVD Studio Pro 3.0.2

i was worried that it would mean that it would over-rule skipping through tracks, but it appears (in preview at least, i haven't burned yet), that it first skips through chapters and then from the last chapter of one track to the first chapter of the next track.
Provided you do not set End Jumps for chapters themselves, this behavior should continue once you burn the disc.
In a scenario like yours, jumps/skip forwards have a certain hierarchy, if you will: only if you're in the last chapter available within a track will you activate the Next Jump for the track. Otherwise, as you've seen, if another chapter is present within the track, it will jump to that chapter.
unfortunately the help manual says this will mean the dvd player will no longer display the counter.
Usually true, though some players display an active counter regardless.

Cant change information on some tracks, such as change the track name/pic

I cant change the information on some tracks such as the track name or the picture. Itunes says in the picture square "Album illustraties niet bewerkbaar" (translated --> albumillustrations not changable).
I hope there is some sort of simple sollution i haven't thought of.
Corne

Corne,
I had the same problem. I checked the extensions on my mac in Finder and saw I imported wav files in stead of mp3. You can change the import-settings in I-tunes. This worked for me.
Bruno

Tracks skipping within the track in iTunes 11.1.5, Windows 7

Similar Messages

Maybe you are looking for