Trade devices? Pantech UML290 USB device for MiFi 4510...

I have a Pantech UML290 broadband USB device. The portable MiFi would better suit my needs. I am still under contract and don't want to pay full retail just to get the MiFi.
I also have the CradlePoint CTR router that works with the Pantech, so functionality is basically the same other than having a device that is batter operated as the MiFi.
I mainly use my current USB device to connect my WiFi only iPad. I have had no problems with the Pantech or CradlePoint router. Occasionally when first connecting I do have to switch the router off/on to get the iPad to connect, but otherwise works great. I want to be able to take my wifi with me is the reason for wanting to trade.

Check out Cradlepoint or peplink
Cradlepoint has affordable price routers...
>Link deleted. Posting links of outside vendors is not allowed per the VZW ToS<
peplink has the most reliable routers..
>Link deleted. Posting links of outside vendors is not allowed per the VZW ToS<
Here is an image of how I use my Pantech UML290 and Peplink Balance 20 Router.
[IMG]http://i50.tinypic.com/dwpan4.jpg[/IMG]
Message was edited by: Verizon Moderator

Similar Messages

  • PANTECH UML290 DOESNT WORK FOR ONLINE GAMING PLSE HELP!!!

    my modem is Pantech UML290     .i  notice cannot play any online games...my old 3g modem works perfectly with the same games but this new service as far as online games or this modem apparently has issues...i have had nothing but problems, high ping rates and packet loss as well as jitter and no one with the exception of 1 service tech apparently cares  TECH DID A PING TEST AT ADRESS  ping -a 66.174.92.14  result were request timed out 4 times, packets sent=4 packets recieved=0  pakets loss = 4 , total= 100% loss, funny thing is i was still connected to internet  and if you ping google.com 0 paket loss...  apparently consistancy or server recognition might be a problem i dont know...maybe modem is bad...either way i cannot play any online games what so ever, when tested at speed test.com and pingtest.com states high ping and high jitter as well as packet loss, no one seems to have an answer for this  note!! on old 3g device i had played these same online games without any problems...so this 4g modem and service advertises online gaming and steady streaming and i cannot do neither why???  someone plse help!!!  also if you look under vz access manager statistics tab, you will see transfer and recieve rates like a heart beat monitor....it consistantly goes up and down like a heart beat instead of a steady flow, goes up as high as 10mbs then drops for a while to 0kbs and stays their for a lil bit...it apparently is loosing communications....old 3g device was a steady transfer flow rate that never dropped to 0 unless i wasnt doing anything...so why is this as well?

    have'nt had any phone call's today regarding the slow down of my BT infinity broadband line.. in the last 3 hours have been online on both the PS3 & the XBOX and the problem is still there... im host in every online game i play but each game is almost unplayable every time..the actual game i play as host on the PS3 runs really slow (only as host) and looking left/right has a blurry feel to it.. on the XBOX its running slightly quicker but still nowhere like it does on both consoles when im not hosting.. when ever everybody else hosts a game that i join,after speaking to them they have had no problem what so ever.. most seem to be on a cable ISP but the speed stats are very simular to mine.. just the hosting is totally different for me...???
    http://speedtest.net/result/1586999761.png
    http://www.pingtest.net/result/50309878.png
    just tested my speed with the above score... i still cant work out why my line is being slowed down ....
    just reiterate that my g/f works from home mon-fri 8am-5pm on a live server including emails etc... the live server would involve being logged on all day checking accounts including various stock levels etc.. so she is very busy pretty much every day..
    im online with my PS3/XBOX prob a couple of nights a week plus as i do shift work,on my days off i play COD most of them days .. so prob around 40/50 hours a week playing online depending..
    i chose option 2 BT Infinty unlimited because i new i needed a very good line with all mine and my g/fs needs..

  • Usb cable for mifi

    Where do I purchase a longer cord for the mifi when I connect to my pc.  I realize it is a wireless device but like to use it on my pc as well.  The connection is so poor I think mainly because the cord is so short I can not get the device away from my computer/work desk when I plug into my USB port to obtain any reception.  There are so many choices I'm afraid that I will get the wrong one.  Thanks

    MIFI has WIFI capability to connect to laptops and computers. I suggested he/she get a wireless internet adapter to connect via WIFI to the MIFI. I should have said "put the MIFI near the window." Also, I meant to say "wireless internet adapter, not wireless broadband card."

  • Is there a way to get my pantech uml290 to automatically reconnect when my windows 7 pc wakes up?

    I have my windows 7 pro desktop set to go to sleep every hour (control panel, power options). When it wakes up, the pantech uml290 mifi device is invariably disconnected. I used to just restart the computer, but I found if I go into device manager (right-click my computer, properties, device manager) and click on network and click action, then scan for hardware changes it will reconnect it. But there should be a way to set the device so it reconnects automatically.

    Update-PROBLEM FIXED by verizon support. I called my local verizon wireless store, who quickly got me tech support after running through a few things. I didn't know you could disable power management for just one device, but verizon tech support did! So you go into device manager, expand universal serial bus controllers, right click the first "root hub", click the power tab, and see if your device shows up. If it doesn't, continue this process through all the root hubs until it does.
    When you find it, select it, and click the power management tab on the far right. Uncheck "allow the computer to turn off this device to save power". Restart the computer to save this setting. Then test it by putting the computer to sleep.
    It did take about 30 seconds until the pantech uml 290 was connected, but it connected successfully three times in a row. I'm very happy with both the verizon store and verizon tech support. They were both very helpful and pleasant to talk t, and efficiently resolved the problem. I still think you pay too much for mobile broadband, and am a little put off that the problem existed in the first place, but I'm very happy to have this problem resolved.
    One other piece of info. I got was that there is an upgrade, pantech 295 usb modem for only 30.00. So if I have any more problems I'll just try that.  (It's still a wired, not wireless device, which I prefer.)

  • USB Device for IPOD not recognized by Windows, whether ipod connected or no

    During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
    When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
    I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
    I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
    Any suggestions?

    I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
    It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
    This is driving me up the wall. Is there a glitch with iTunes 7?
    Can anyone help me out?? Thanks
      Windows XP  

  • Using USB 6341 device for frequency generation but level is droped when conect

    i am using USB-6341 Daq Device for frequency generation. The desired frequency is generated correctly but when i connect to other device the voltage level i means the Peak to Peak voltage of the frequency dropped to 0.6, 1 Volt and also the frequency fluctuated. As I disconnect it from the load or the device the frequency becomes constant and peak to peak voltage becomes 5.
    Please some help me to resolve my problem.
    Thanks
    Best Regards
    Naseeb
    Solved!
    Go to Solution.

    Hi Nasib,
    I just wanted to clarify a few more things. Can you answer the following questions?
    What frequency are you trying to generate?
    When there is no load connected do you see the desired frequency?
    When the load is connected, does the frequency always change to the same value or does it fluctuate within a certain range? If it fluctuates, what is the range?
    Also, what microcontroller are you using?
    Can you provide any images?
    Regards,
    Travis Ann
    Applications Engineer
    National Instruments
    Applications Engineer
    National Instruments

  • Splitting the Time Capsule USB port for 2 devices ??

    So if i have and external HD plugged into tc usb port and I also need to plug in a netflix ready blue ray player to the same port- is there a splitter I can buy to do this or what other options do i have?
    I have an extra airport extreme I am not using-could I run an ethernet cord to it and use that usb port for my second device without and problems?
    Thx

    First, yes it is possible to attach multiple devices to the TC's USB port. You will need a USB hub though. Some users have discovered that not all hubs are compatible with the TCs USB port. So you may need to shop around if the first one doesn't work.
    However, the USB port on the TC is designed primarily to handle external HDs or printers. That is, it is designed to make them available to your local network, not to the internet. So I have doubts that the BR player will be able to have full interest access via the TCs USB port.
    See this KB article:
    http://support.apple.com/kb/HT2421
    Hope this clarifies things a bit. Cheers!

  • USB devices for audio output

    for five or six years, I have been using an EDIROL device for outputting from the USB port to a standard stereo amplifier.
    I like it - it's good - I would recommend it.
    But I was just wondering what other USB audio output doo-dads might be out there? Surely something good has been invented since 2003.
    Is there a wrap-up out there, possibly done by one of the Mac magazines or blogs or whatever?
    thanks!
    w

    This is a great place to start.
    http://www.computeraudiophile.com/

  • Connecting 2 USB Devices for recording in GarageBand blue yeti and M-Audio Mobil pre. will they both work together one track each?

    I Have set my Audio Midi Setup under Audio Devices to Aggregate Devices and selected M-Audio MobilPre USB and Blue Yeti Microphone.
    I plugged my MobilPre into one USB port on my MacBook and the Blue Yeti Mic into the other USB on my MacBook. So I have two inputs
    and I set each device for OUTPUT as the HeadPhones from the Blue Yeti Mic. I still cannot record the vocals on the blue yeti and the Guitar on the MobilPre
    At the same time even though both show the rec button is active on both. What do I need to do to get these to both work recording at the same time?

    I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
    With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
    As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
    Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
    Last edited by rwiggins (2014-12-14 00:26:39)

  • RT: Remote desktop says "can't find a suitable device for drive C"

    Hello,
    there is a french post on exactly the same topic, but I can't apply the solution given there.
    My problem is the following: I have a remote desktop prepared to work as RT target. It has been checked for compatibility, the hard drive has been formatted in FAT32 format, it has been found by my host and has been assigned a static ip address. I have installed the software I need ( LabView 9.0 RT) using MAX. Now, when I try to boot it with the option "boot using software installed into the hard drive", all I get is the message
    "Can't find a suitable device for drive C"
    I have reseted the BIOS, have tried formatting the hard drive in the other format, uninstalled and reinstalled the software, tried to start the target pc without the usb stick, but nothing seems to work.
    Do you have any ideas about what is going wrong?
    Thank you,
    Samuel
    Solved!
    Go to Solution.

    So you've got a IDE (and not SATA) hard drive? That should be supported anyway.
    That would only confirm my experience... it's hard to find hardware compatible with LV RT. Before buying you cannot know if it's compatible. Once you have it the evaluation tool might tell you it's supported but still it might not work. I tried several motherboards in the last years, most of them did not work.
    Your best bet might be to use relatively old hardware.

  • TV Tuner or Video capture device for MBP

    I'm wondering if there is a device usb or expresscard34 that can allow me to watch cable TV or just a composite video input device that can be used with a cable box. I know there must be lots of devices for PPC Macs but which ones actually work on MBP and which one do you guys recommend? I'm looking for something below $150. Thanks in advance!
    MacBook Pro 1.83Ghz 1GB RAM   Mac OS X (10.4.6)  

    I have been using an Elgato eyeTV DTT on an Intel Mac mini and it has been working really well using version 2.1 of the eyeTV software.
    The eyeTV software comes with all Elgato eyeTV devices and works fine on Intel macs.
    I am very impressed with the Elgato devices and can recommend them.
    iFelix

  • VB6 Using MCI Commands to Select MIDI Output Device for Playback in Windows 8.1

    I have written a MIDI Player program in VB6 that uses the multimedia control.  In Windows 8.1, I understand that midimapper is no longer available so the third party softwares which can set the output devices for MIDI do not work as they did for
    Vista and Windows 7.  I found this Microsoft example code that selects sound cards using MCI code and was able to modify the code to show me the MIDI output devices.  In particular I need to output to a USB to MIDI cable.  Can this code be modified
    to do just the PLAY function for midi out to the USB to MIDI cable?  I do not need the record side of the program.  Here is the MS article number since I can not post the link to the the VB6 program:  q182799
    With a modified code to play midi, I can then pull the necessary code into my MIDI Player Program.  Thank you for the help on this.

    Hi,
    For Visual Basic 6 questions, read the post at the following address
    http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/thread/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.  Thank you for your understanding.
    Kate Li
    TechNet Community Support

  • ZEN Sleek - XP Home will not recognize device for install! PLEASE H

    I have a ZEN Sleek (normal not photo) had it for year now. Lost my install disc and have a new PC. Im running XP Home Edition. I have tryed to install the software on my PC from the downloads page ( for tranfering mp3's and CD's to my player) but when it prompts me to plug in my ZEN Sleek it doesn't recognize the device as being there. I get a "Connect Device" for it to search message. I know my USB is fine. ( I have a PSP/Playstation Portable). Am i missing something, perhaps a driver I also I checked to see if the ZEN Sleek is listing in the device manager. It isn't. What do i do Much Thanks, 2W3Message Edited by 2W3 on 05-26-20070:08 PM

    Tried various boot sequences but still no luck.  This is extremely frustrating since everything is rev'd up and ready to go...but the OS won't boot.
    It appears that everything gets loaded to the HD but the HD will not "boot".  This will happen if I make the HD the 1st, 2nd or 3rd boot device in the sequence.  
    I've seen some chatter about Corsair XMS and K8T Neo incompatability cretaing boot problems.  How about the BIOS version...any suggestions or ideas?
    Kinda stumped here and don't want an expensive paperweight

  • How do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

    how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

    Hello Kwastfamily,
    It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Can't find device for iPhone

    My Macbook pro can't fint my device for iPhone. I just bought a new iPhone, and the device for my older iPhone didn't work so there has to be something wrong with my mac... ?

    Hi tirilholm,
    Thanks for visiting Apple Support Communities.
    If iTunes does not recognize either of your iPhones, you may find the steps in this article helpful:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    If your Mac does not recognize the devices, start with the steps in this article:
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    All the best,
    Jeremy

Maybe you are looking for