Trade Funds report to update Settled key-figure for rebate scenario

Dear Experts,
We have a scenario where we are triggering rebate creation in ERP from Trade Promotion in CRM.
The rebate accruals are generated over a period of time based on sales orders.
Now we have 3 standard SAP Trade Funds reports which helps us in extracting the accruals data from ERP rebates and updates "Accrual Balance" key-figure of the Fund associated with the Trade Promotion.
Now in ERP once the rebate settlement is created, is there any standard SAP report which will update the "Settled" key-figure in the Fund.
Please advise.
N.B. Our scenario has TPM integrated with Trade Funds & we are using CRM 7.0 EhP1
regards
Animesh.

Many thanks for ur replies!
problem here is that, since i had declared this particular fileld as a integer type key figure, it is not allowing me to enter characteristic values in update formula .
and venkat, how can i change that key figure to char? is that possible? they have specifically told to write as a key figure. and in this model we have only one key figure ( this particular field ).
that infoobject is not available in BW as of now. so i had created it as a key figure as was told by them.
Thanks,
Ravi

Similar Messages

Report Painter - new Basic Key Figure for Currency Translation

Hi,
I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
Did anybody encounter an equal problem?
Many thanks and regards
Markus

have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

Subject : Problem with Virtual key figures for one scenario.

Hi Gurus,
I have implemented Virtual Keyfigures for my Bex report and it is working perfectly bUt for one scenario.
If i give PLANT and MATERIALS in the selection , The report calaculates the Virtual
keyfigure value correctly But if i give Only PLANT
and NO Materials ( A single plant can have 700 materials also!!), The report executes and after sometime
gives me a messsage " Disconnecting from Server"
I executed the report in RSRT . It gives me this error "exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred"
Since the Virtual keyfigure doesnot use Cache memory. Is it restricted by the Physical memory?. How to overcome this
problem?
Please let know if anyone faced this issue and resolved It. Any help or guidance is really appreciated.

Hi Oscar,
Thanks for reply,
How can i know the overflow and how can i use the catch for avoiding the short dump?
thanks in advance.

How to cumulate key figure for whole fiscal year with one time variable?

Hello everybody!
I have a problem creating a query that allows to get cumulated key figure for <b>whole fiscal year</b> (FY), when I actualy type <b>only last period</b> for the FY.
The query itself is very simple:
- I have "Organization" characteristic in "Rows" section
- I have one key figure "Number of invoices" in "Columns"
- I have "Fiscal year variant" 0FISCVARNT defined in "Filter" that has 12 periods within Fiscal year
and then
- in section "Free Characteristics" I have "Fiscal year/period" 0FISCPER.
I want to be able to provide ONE single value when run query, which is last period of a FY (like 012/2003), but then in report see cummulated number of invoices for WHOLE fiscal year.
Will appreciate any help!
Vitaliy

Please see the white paper entitled "How to... Derive a Variable value from another variable 2.x (pdf)".
Regards,
Troy

Restricted key figure for more than one key figure

hi all
i want to restrict almost three keyfigures based on the same posting period. So instead of creating restricted key figures for each key figures can i create a RKF for all the three key figures based on the same posting period.
Is there any way i can do that.
thanks and regards
vijaykumar

hello Chandra,
if those are the only 3 keyfigures in the query, you can have posting period restricted to the required period in the filter area( if u dont want to the period to be displayed) or else you can restrict the period in the rows/free chars area too.
you can restrict the posting period using variable with period value as a user input value.
If there are other key figures too, then you need to create 3 diffrent restricted key figures restricted for this period.
thanks,

Suppress cumulated key figures for actual data

Hello all,
I have build a query which display monthly actual and forecast order income for an ficsal year. The fiscal year starts in July and end in June
The forecast data were loaded in BW over an flat file for the whole fiscal year. The actual data gets loaded daily from R/3.
When I run the query and select the whole fiscal year and displayed the key figures as "cumulated" in the query properties, I can see all the cumulated forecast values (for 12 months) but the actual order income data just cumulated till the current month (December). For the next months (until June) always the last value from December remains.
I want to provide a line diagram in a Web Application, which shows the forecast and the actual data. Right now the line for the actual data stops to raise at the current period and gets continued as a horizontal line till the end of the fiscal year.
Therefore my question is: Is it possible to suppress values for actual data for the next periods in order to end the actual order income data line in the diagram at the current month.
Any ideas would be great.
Best regards from Munich,
Stefan

The one thing I can think of would require a very messy way of doing things, but it would probably work.
If you created a set of calculated/restricted key figures for each period of the fiscal year (non-cumulated), you could also have a set that cumulates up to each period. Then, in the calculation, you can set the stipulation that if period x is not > 0, then don't sum that particular colum. Then, supress columns that don't have any data in the structure properties. I think you'd end up with 24 columns, 12 hidden, and some that won't display depending on which values exist.

Bex report does not display key figures

Friends,
Need help urgently.
We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report.
If reported independly on that IC1 it does show all values. This sounds really weird but its taking up all my time.
Please friends, need your inputs on what else could have gone wrong.
FYI...earlier we had same problem but creating new report on this multicube resolved problem. But this time, we have a new KF added to the infocube(IC1). But no change to the reports are made. Even though problem occurs. I even transported all the rules, multicube and infocube.
Please help me identify what could be the cause for it.
-Raj

Gupta,
Thanks, this resolved my problem.
But here;s another issue that came up now.
I have a keyfigure (conversion factoor to EA) as attribute to master data infoobject (zmatnr). I have this included in the multicube. On the query, I have created a replacement path variable for conv. factor and this works well with all reports except this sales report which has key figures included from multicube(from multiple infocubes in muticube. Any idea what is that i am doing wrong?
thanks

Change in Key figures for COPA report

Hi
We have changed some formula using T.code KER1 for a element of Key figure scheme which is used in COPA report.
How do we find out which all COPA reports will get impacted by this change.
Regards,
Rams

that key figure mapping helps you to map the value fields to the std fields (the ones that are included in the std COPA content cubes.) So that you dont end up creating ur own Zfields in BI to correspond to the value fields. If you have a functional guy how can do the mapping or help u do it - go for it .... orelse you can always create ur own Z objects, so that you dont have to go back to source system to figure which IO refers to which value field.

Update rule key figure problem

Hello All,
I am busy creating update rules for an InfoCube. I have defined the update type for the key figure as "addition", I have also selected the source key figure (Budget Volume APO PC) but get the message "Target unit and source unit for the key figure Budget Volume APO PC must be the same" and it gives a red status to the key figure. Please explain what I should do to rectify the problem?
Thank you and kind regards,
Keith

Hello KeItH,
how r u ?
first analyze the InfoObject and then if it is not going to be added up for the result value then u can try selecting OVERWRITE option, but this will overwrite your old values and hold the latest one.
Best Regards....
Sankar Kumar

How to rearrange key figures for every row in a report

Hi gurus,
I need help in rearranging the key figures values( product sales for A, B, and C ) in the columns for each sales division row D1,D2,D3 displaying keyfigures in the order of descending sales volume for each division. The order of key figures has to change for each row.
Is it possible through some user exits? Your help is appreciated.
Thanks

Hi,
I am extremely sorry for my earlier post. I am not too sure about that. I heard that we can do RRI on Infoobject.
Please look for other experts inputs. I apologise for that.
Regards,
Suman

Description of key figure for multi language support issue.

Hi Experts,
Have a good day ahead!!
Custom key figure description multi for the language support issue
The key figure is created in English language and description also in English.
When I have logged in to English language and checked the report in Bex ,description of key figure is available.
But when I log in to other language(German, Spanish Portuguese and etc) environment the description in Bex rport of key figure is showing blank
In rsa1 in both English and other(German, Spanish Portuguese and etc) environments key figure description is okay and correctly displaying.
Please post me your inputs on the same.
Thanks in advance!!
Regards
Priya.

Hi Prasanth,
This are the key figures XPRECIO: Transactional Price and XPRECLIST: Price list, its maintained in RSA1 tcode at info object level .
These two KF descriptions are maintained in English, its working fine when I login into SAP Bex analyzer with English language and its not showing the description for the languages (German, Spanish, Portuguese and etc).
Its need to be displayed in when login into SAP Bex analyzer with language German, Spanish, Portuguese and etc.
Regards
Priya

How to find the basic key figure for a calculate key figure?

Hi,
We know one Calculated Key figure available in a query for a Info Provider. How can we find the Key figure which has been used for that CKF or from the Calculated key figure? Please help.
Advance Thanks,

Hi,
1. To check the definition of the CKF you need to go to the query designer.
2. Once into the query desiger switch on the technical names in the query. THis option is available in the Icons displayed on the top of query designer
3. Then right click on the CKF and click display. You will find the necessary details.
4. If you are not able to see the definition of the CKF, then you may need to go in the change mode and then . Try this in development environment.
Regards,
Adarsh

How to choose the characteristics and key figures for a cube

Hi Gurus,
To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?

To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?
Hi,
For CO-PA since it is a generated DataSource, except for the common characteristics ( E.g. Company Code, Controlling Area ) where you get standard InfoObjects for all other Characteristics and Key Figures you end up creating custom or Z characteristics and key figures. This is unavoidable.
Assigning points is the only way of saying thanks in SDN
Thanks,
Shan.

How to define calculated key figure for more summerized level ?

Hi,
I'm new with Query and client ask me Ito calculate % of WorkHrs / Plan Hrs.   I was able to calculate the % for all selected employees. There're no problem .
But when user drill on Time Code, they lost the % calculation because plan hrs is not presented at that detail level. User will see X at % calculation field as system can not perform the calculation.   PlanHrs is present at more summarized level only. User still want to see that % calculation possible at detail level.
I`ve tried different calculation, summarization but none of them work. It works only for one employee but using SUMRT () but It doesn't work if there`re multitple employees in the report.
My question is how can I do calculation at detail level if data existe only at more summarized level ?
Could someone help me to make this calculation possible ?
Many thanks.
Employee   TCode    Plan Hrs Work Hrs       %
00000121,    0009   , 1750,    0
00000121,    1PRS   ,      0,     67      ,   X
00000121,     2S02 ,      0,      8       ,   X
SubTotal for 0000121 1750, 75 , 4.29
00000122,    0009   , 1892
00000122,   1PRS   ,       0, 1333 ,   X
00000122,    2S03 ,       0,     107,    X
00000122,    2S04 ,      0,      232,    X
SubTotal for 0000122 1892, 1673 , 88.42

Here is my current report detail view.
[http://s49.photobucket.com/albums/f270/helenen/add/?action=view&current=2010-06-2511-44-20.png]
(click on link and view at 100%)
The 3 rd KF column is the calculated ratio which is => 2nd Column (Work Hrs) A% 1st column (PlanHrs)
Right now, I cann't get % at detail line (they're now shown as X, because PlanHrs is not null at detail line.
I'd like those X should be calculated as => WorkHrs (at that line) A% PlanHrs (of that specific employee) .
For example: 16 A% 1827 = 0.875%
It seems soo eassy but I coulnd't do it.

Calculated key Figure for Group By

I need a way to get the total amounts group by all the retailer that related to the root in BEx Query.
Just to explain myself clear, I'm putting the following dummy data.
In my current report I've the following:
Root     Retailer Cancel($)    Gross($) Other($) NetSales($)
1001     1001      00.00          100.00      50.00     90.00
     1002      20.00          110.00      40.00     80.00
     1003      10.00          200.00     110.00    180.00
1004     1004      30.00          130.00     100.00    140.00
1005     1005      00.00          100.00      50.00     90.00
     1006      10.00          200.00     110.00    180.00
I need to show only the most current retailer and the totals of the amounts as below:
Retailer    Cancel($)    Gross($) Other($) NetSales($)
1003        30.00          410.00     200.00    350.00
1004        30.00          130.00     100.00    140.00
1006        10.00          300.00     160.00    270.00
I don't know how to do this. If some one help me on this with step description would be great.
Thanks
Nazmul

Hi,
This will be based done in the start routine of the data provider. Its very difficult to achieve this type of logic in front end.
Thanks..
Shambhu

Trade Funds report to update Settled key-figure for rebate scenario

Similar Messages

Maybe you are looking for