Trade-off between the one-arm and two-arm WAE designs

We are configuring a WAE (model 512) for a branch office and I was wondering if someone could please tell me the trade-off between the one-arm and two-arm WAE designs..
thanks..
greg..

if you are using WCCP then the WAE becomes the client withing the servcie groups 61, 62. In order to accelerate both vlans then apply the ip redirect 61 in on the client vlan ineterfaces to the one interface.
If inline, you can use both 2 port groups for each client interface or trunk all to a single inetrface and configure which vlans you would like to accelerate.
Now in terms of of using both GE inetrfaces, I would have to check. A topology diagram would help

Similar Messages

  • I have one Iphone and two computers. How do i get my ringtones off of one computer and onto the other?, I have one Iphone and two computers. How do i get my ringtones off of one computer and onto the other?

    I have one Iphone, and two computers. They both have different purchases on them. One is older than the other. and one was my moms. How do i get the ringtones off of my computer and onto my moms computer to use all of them on my Iphone?

    Copy them to a cd/dvd/flash drive/external drive/etc,  then to the other computer.
    E-mail them.

  • POSDM Diff Between : One Step and Two Step Processing Tasks

    Hi All,
    Can you pl give some points on difference between "One Step and Two Step Processing Tasks in POSDM ??
    Thanks!!

    Please consult the SAP Note 980272 on the service marketplace. It gives a detailed description of the difference.

  • I purchased Photoshop for mac a few years ago and put it on one of my computers. Since then, I have gotten a new mac desktop without a disc drive. I would like to take my photoshop off of the old computer and put it on the new one. Is there anyone I can d

    I purchased Photoshop for mac a few years ago and put it on one of my computers. Since then, I have gotten a new mac desktop without a disc drive. I would like to take my photoshop off of the old computer and put it on the new one. Is there anyone I can download it?

    What version?

  • Dialog box says-"Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help.

    Our Bridge has been acting very strange. It keeps giving a dialog box of "Bridge encountered a problem and is unable to read the cache. ... purge central cache" For one, I can't find the central cache and two, I've purged the cache in bridge. Shouldn't that help? There's just all kinds of weird stuff going on. I suppose it does have something to do with the central cache, so maybe someone can tell me where to find it.
    When I use the burn/dodge tool sometimes it drags and staggers and takes forever to complete whatever I'm burning/dodging. When I try to delete an image from the dock, it won't disappear but it won't display either.
    Any help would be appreciated.

    The Central Cache is the Bridge Cache.
    It's referred as the Central Cache to differentiate it from the individual folder's cache or even the individual image cache.

  • In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
    The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

  • Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

    It the same phone but you don't have to have data on it if you don't want since they are older phones.  We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone.  Mary

  • ADF BC - One Master and Two Detail pages How To?

    I have an existing ADF BC .jspx master-detail page that works fine. It shows one product as the master (read-only; no navigation controls) and assocatied customer feedback as the detail (multiple records; read-only.) Now I also want to compute some averages from the same table used to create the detail view object. I have created a second view object because this requires a separate query that calculates aggregate values. I want to take advantage of using view links so that this 2nd view object is automatically linked to the master record via the primary key.
    My question is how can I link this into the existing master-detail data control so that I can drag/drop it to include id on the existing .jspx page and the primary key linkages will be handled automatically?
    Tables
    Product
    Feedback
    View Objects
    ProductView
    FeedbackView
    FeedbackAVGView
    Current ViewLink
    ProductFeedbackViewLink = ProductView + FeedbackView
    Current DataControl
    ProductFeedbackViewLink-Instance
    Data Control is displayed on .jspx page; want to also include 3rd View Object, FeedbackAVGView, in the Master-Detail relationship and display on the .jspx page

    Thanks for the reply. The existing customer feedback view object displays the customer's text feedback (testimonials) - these will be displayed in a read-only table with multiple records.
    The new view object aggregates the ratings score from the customer feedback (same FEEDBACK database table) and will use a form to display the results (not multiple rows.) The PK is included in the aggregate view object query.
    Note there is already an existing viewlink between the PK (Master) and FK (Feedback) - in the data control, this viewlink is an instance of the Master View Object and the Customer Feedback View object. Now that I have created a third view object, should I create another View Link between the Master View Object and the Customer Feedback AVERAGES View Object? If I do this, how do I include it in the existing .jspx page? If I add this new View Link to the Application Module I will have two different Data Controls:
    Data Control #1: Master (Product) View Object + Customer Feedback View Object #1 (implemented as a master-detail read-only form/table on a .jspx page)
    Data Control #2: Master (Product) View Object + Customer Feedback AVG View Object #2
    I'm confused as to how to integrate the second customer feedback view object into the existing Data Control / Master-Detail read-only form/table on my .jspx page?
    thanks

  • ITunes overwrote data on my iphone now i have lost all my pictures I have taken between the last backup and now.

    I have been trying to contact the support team however my support has expired, I connected my iphone 4s to my computer and it started to sync nothing new, however, when I looked at my phone it actually restored my phone to a previous back up and i have none of my photos/videos I have taken between the last backup and now.
    How can i get these files back off my phone I have tried a number of restore software sites but they only see what was restored to my phone via the back-up from Itunes not the pictures that where taken over the last two weeks.
    Please can anyone help...

    It doesn't do that by itself. You have to manually initiate a restore.
    If you weren't backing up to iCloud and you didn't have Photo Stream on so the photos could upload to the cloud, they're gone. You can't recover them.

  • What is the difference between the MapViewer.war and the .ear in 11.1.1.7.1

    There are two mapviewer file sets, the mapviewer.war and the mapviewer.ear in Oracle Fusion Middleware MapViewer Version 11g ps6 (11.1.1.7.1).
    What is the difference between the mapviewer.war and the mapviewer.ear in 11.1.1.7.1?
    Which one should I install in the Glassfish?
    The mapviewer.war is in mapviewer11g_qs\apps.
    Thanks
    Edited by: 1008396 on May 28, 2013 1:24 PM

    the war is the preconfigured/deployed mapviewer in that glassfish container.

  • This message is used to carry data between the BlackBerry handheld and an associated server.........

    Hi everyone,
    I am having issues with a couple of BlackBerry's, where they are receiving a message on their phone saying:
     "This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server."
    Email is from "[email protected]"
    This has only appeared since installing the BlackBerry Desktop Software version 6.
    We have used the link below which resolved the issue on one of the BlackBerry's but on the other neither of the options are there.
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04254&sliceId=SAL_Pub...
    The link I have just posted references to version 5, just wondered if anyone knows how to resolve it in version 6 or some other option. Original email is still received fine but want to stop the other email about "This message is used to carry data between.......".
    Thanks in Advance.
    Kevin

    An alternative, if you cannot stop it via the two recommended fixes, is to send those messages to your jiunk folder at the email server level so that they never reach your BlackBerry...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • There is a difference between the document total and its components

    Hi!
    I have an error message "There is a difference between the document total and its components" when I want to create an InventoryGenEntry
    the problem arises from time to time and my customer must do the document two or three times before it is created.
    I have seen in this forum and in notes that this is probably being caused by a Rounding.
    I am using 2 digits for amounts, 4 digits for prices, 6 digits for rates and 3 digits for quantities.
    For information my customer use SAP 2005 and the patch level 46.
    This problem happened only in InventoryGenEntry. how can I modifiy parameters to resolve this problem?
    thank you for your help.
    Best Regards
    Séverine

    Hi Séverine,
    Do you find any additional code added to SBO_SP_Transaction stored procedure. A similar issue with stock transfer fixed in later patch. Please test in latest patch.
    Regards,
    Vijay kumar
    SAP Business One Forums Team

  • Diff between the Start routine and Update rules?

    Hi Gurus
    Diff between the Start routine and Update rules?
    Thanks in advance
    Raj

    Hi,
    Routines are like conditions or business rules that could be applied to filter the data while entering the BW system or could be used to apply certain conditions on the info objects itself.Update rule level you manipulate your data and  write your start routine.
    There are 4 types of routines
    1. Start routine- Could be used at two levels (transfer rule level and the Update rule level)
    This Start routine written at the transfer rule level helps filter the necessary data coming from the source system.
    For Example: If you decide to extract data that contain only quantity greater than 500 , then you could specify the Start rouitne to achieve this.
    The Start routine at the Update rule level provides similar functionality but at this point it helps direct specific data to 
    different data targets.  For Example: If there 3 data targets being fed from the Infosource, you may want to apply some condition to each data target, like send year 2000 data ti Data target1, 2001 to data target 2 and so on.  This can be achieved by using Start routine at the Update rule level
    2. Transfer Routine: This feature is available at the transfer rule levels
    While performing the transfer rules operation, there are 4 features available to the developers to create business rules on top pf the Infoobjects.
    1. You could do a one to one mappping of the Infoobject
    2. Provide a constant value
    3. Include a formula
    4. Write an ABAP routine.
    These 4 options refers to the transfer routine
    3. Update Routine:
    The limitations of just having 4 options in the transfer routine is overcome at the update rule level. There are various other 
    sophisticated features avaialable apart from the 4 options mentioned above. These business rules could be specified pertaining to each data target.
    4. Conversion Routine: It provides functionality to do Currency and unit conversion.
    Regards.

  • Is there a Mac guru who makes house calls in Concord, California? I'm getting the runaround between the Genius Bar and Adobe Support.

    Is there a Mac guru who makes house calls in Concord, California.? I'm getting finger pointing between the Genius Bar and Adobe Support. It;s been a week and I'm at my wit's end.

    I upgraded from OS X 10.4.1 to Snow Leopard 10.6.8. After lots of application problems I took the computer to the Genius Bar. The computer upgrade was given the "thumbs up". They said the problems are with licensing issues with Adobe Creative Suite 4. The other application problems could be resolved by just uninstalling Microsoft Office and reinstalling it. The Microsoft Office reinstall seems to have gone well, however it is still slow to open and the color wheel spun extra-long on this morning's first opening.
    We are operating two accounts on our one Mac Pro computer. Since the upgrade, we can not both have an Adobe application open at the same time. They work fine when only opened on one desktop, but we get an "ATM Subsystem Failure" notice when the program attempts to open on the other desktop. I've spent many hours on the phone with Adobe, they helped me remotely to reinstall CS4, but the problem remains. Finally, last night, the tech guy said that it has to be an Operating System failure and to take the computer back to Apple.
    Frustration prompted my writing. I have a call in to someone local who may be able to help, who knows!

  • Is there any difference between the commerical product and the Teacher/Student version?

    In Adobe Photo Shop Elements 13 and Premiere Elements 13 is there any difference between the commerical product and the Teacher/Student version? I don't remember them having two versions in the past.

    Is there a difference? Sure. Will it be noticable? Maybe.
    The 9i client will use one of the 9i ODBC drivers. The 8i client will use one of the 8i ODBC drivers. The 9i drivers will generally have more bug fixes & more features than the 8i drivers. It is possible, though rare, that the 9i drivers will fix a bug whose behavior your application was dependent on and/or introduce bugs that were not in the earlier version. Of course, you have to consider the different features of the underlying clients as well-- i.e. a 9.2 Oracle client cannot communicate with a 7.3.4 database, an 8i client doesn't know how to handle data types introduced in 9i (i.e. TIMESTAMP), etc.
    Justin

Maybe you are looking for