Trade Preference customizing in ECC - Control Settings for BOM Transfer

Hi,
i am struggeling what i should customize in the field "BOM Application for GTS" in ECC customizing activity "Control Transfer of Bills of Product for Preference and Re-Export".
Should i use SD01 or PP01 or PI01. As far as i know my company is using classic production orders as well as process orders.
Does anyone know the impact on the field?
Is it only relevant for exception cases like "sales order BOMS"? I have found this thread and there SD01 was maintained:
Preference: Control Transfer of Bills of Material
Thanks.
Regards Tobias

HI Tobias,
I`m not sure if you still need help with this one. If your customer only uses production order boms then PP01 is the right choice for you....
Regards,
BP

Similar Messages

"Table Name" in customizing SUS:"make field control settings for tables"?

Hi Gurus,
In the following customizing node, I can find the table name such as :
     ORDER.DET.EDIT
+     ORDER.DET.VIEW+
+     ORDER.HISTORY.DETAIL+
+     ORDER.ITEM.EDITH+
+     ORDER.ITEM.EDITL+
+     ORDER.ITEM.EDITL.WO.OR+
+     ORDER.ITEM.EDITM+
+     ORDER.ITEM.EDITM.WO.OR+
+     ORDER.ITEM.EDITS+
+     ORDER.ITEM.EDITS.WO.OR+
+     ORDER.ITEM.VIEWH+
+     ORDER.ITEM.VIEWL+
+     ORDER.ITEM.VIEWL.WO.OR+
+     ORDER.ITEM.VIEWM+
+     ORDER.ITEM.VIEWM.WO.OR+
+     ORDER.ITEM.VIEWS+
+     ORDER.ITEM.VIEWS.WO.OR+
+     ORDER.LIST+
+     ORDER.SDLN.EDIT+
+     ORDER.SDLN.VIEW+
It's difficult to know the difference for these so-called "table name"...
"SAP implementaion --> supplier relationship management --> supplier self-service --> settings for user interface --> make field control settings for tables"+
What's actual meaning for these table names? Where can I find related document and actual corresponding transparent tables for these so-called talbes?
Thanks and best regards
Jack

Hi Neelima,
Thanks a lot.
Checked the SAP note, but I could not find corresponding infomation about that, kindly please advise again.
Best regards
jack

Remote Control settings for Markers

The user manual for Studio Pro 4 states that Remote Control settings for Markers will override all other settings while that part of the track or story plays.
This however, is not the case- In my project the track & story settings for Remote Control>Menu are actually overriding marker Remote Control>Menu settings, & I really need the marker functions to take precedence over other functions.
Any idea how I can make this happen?
Thanks!!
eric

As Jake said - I am not seeing this behaviour either.
If you clear all end jumps from chapter markers and place the markers into stories then you set the menu call for the story. This can be different to the track and depending on which you are playing the menu call for that item will take precedence.
Of course, if you really want to make it bullet proof then you could point the menu call to a script. Assuming that no matter which story you are in, or how you got to the marker in the track, the following script will always return you to a specific button on a menu for the marker that you have just played
mov GPRM0, SPRM7
Jump Menuname, [GPRM0]
SPRM7 is a system parameter that checks which marker has just played. The first line of the script loads the value of this into a memory slot called GPRM0. The second line operates a jump to your menu - I assume there is only one menu here - and using a conditional GPRM based button jump, the value of GPRM0 fills in the value of the button to go to. This saves writing out lines of code for each possible button.
If you have lots of menus then this script can be adapted very easily to cope with that, or you can set up other scripts to identify which menu you have come from so as you know which to go back to.
However, before any of this I would want to know why you are not getting the expected behaviour on our project - my guess is that there is going to be a menu call set into a chapter marker which is over-riding the track or story menu call. If you have end jumps on markers, or menu calls on markers, remove them.

Control parameters for data transfer

Hi!
There are no data in SBIW source system - General Settings - Maintain Control Parameters for Data Transfer.
How does it have an influence on loading data?

Hi,
Maximum size of a data packet in kilo bytes
The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package. SAP recommends a data package size between 10 and 50 MB.
Frequency with which status Idocs are sent
With this frequency you establish how many data IDocs should be sent in an Info IDoc.
Standard settings
Frequency 1 means, for example, that there is an Info IDoc for every data IDoc. In general, you should choose a frequency between 5 and 10 but not greater than 20.
Recommendation
The larger the packet size for a data IDoc, the smaller you should set the frequency. By doing this, you make it possible to get information on the respective data load status in relatively short time periods when uploading data.
Maximum number of parallel processes for data transfer
Select a number greater than 0.
Parallel processes can be set from the SAP core release 3.1I onwards.
These parameters are, therefore, ignored in releases before 3.1I.
However, there is a possibility of importing the SAP release 3.1I into earlier releases.
The more parallel processes that can run the better the performance of your system will be. However, you must bear in mind the number of available dialog processes here.
It will be fine and more effective if you use sap recomended values in those respective fields

Copy control settings for Multilevel variant configuration

Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied   the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
Deepak

Hai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data       Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
                                  Copying requirements 301
DataT 151 General item data                                          Pos./neg. quantity   +
                                                           Copy quantity
DataT 102 Bus.data/item compl.                                     Pricing type         G
DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                    Copy product select.
FPLA 251 Conditions                Configuration
                                                           Campaign Deter.
Regards,
Mani

Custom Quicktime pro export settings for iPhone

I want to custom export from Quicktime Pro, using h.264 in an mpeg4 container with a low data rate (about 400kb) and smaller size (400x220)
It imports into iTunes fine, but won't sync to my iPhone (error message: 'xxx' was not copied to the iPhone 'xxx' because it cannot be played on this iPhone.)
I've tried the Quicktime Pro preset called 'movie to iPhone', and it works fine: the movie copies to my iPhone. The filesize though, is far bigger than I know I can get it down to with custom settings.
I just can't get it to load onto my iPhone.
What am I missing?

You've got Tiger and Automator! Learn how to use them help you make some "presets".
http://www.apple.com/downloads/macosx/automator/
You could also "hack" the .plist files found in the QuickTime Player.app and edit away.
Control-click on the QuickTime Player and choose "Show Package Contents". Inside the resources folder are a number of .plist files for presets. If you have the Developer Tools installed a double click on a .plist should open the Property List Editor. Change the settings to your liking, but beware.
I use Automator as either a "workflow" on a stand alone "application". Workflows can be triggered by a control click on a file where the "apps" act like AppleScript "Droplets". Drag a file to the droplet and let the application do its thing.
QuickTime Pro stores the "Most Recently Used" settings for many exports. These would be easy to re-construct or edit to allow you to create dozens of different "presets". Save each as an application (naming them may be troublesome) using Automator.

Custom Timebase in sequence settings for 15 fps animation

I have an stop-motion project, where we are capturing images to playback at 15 frames per second. I have set up FCP to do this in the past, but I cannot find where the preference is. I thought you could just set your sequence settings to use a 15 fps timebase, but all of the options are from 24p to 60. I have an older project file that has the 15 fps timebase, so i could just copy that sequence, but am I missing the obvious preference option to make a 15 fps sequence, or did they take that option away between fcp 3 and 4.5?

I was thinking about working at 30 fps, and setting the image sequences to use a two second rather than one second duration to simulate the 15 fps playback rate of the movie, but the problem is that the cut made in fcp is only an offline edit, made using lo-quality quicktimes that have to be replaced with the original image sequences for the final export.
Its not to big of an adjustment to do this, but I don't see why I have to now, and didn't need to before, especially since I will double my file sizes.

Messed up password control settings for sleep

I recently thoughtlessly installed some trialware for face recognition and as a result I can't put my mac to sleep anymore with password protection clicked because no warning message comes up when I do .. I'm forced to reboot the computer if I have password ticked, because it just produces a black screen since uninstalling the offending software. Can I fix this without having to reinstall my whole OS?

Sent
Tom

Settings for Data transfer

Hi,
Please explain me the settings/configuration to load the data from R/3 to APO.
If I am not wrong ,we give path name in info package if the data is to come from flat file. What about data from R/3?
Thanks,
Prabhat Sahay

Hi Prabhat,
you can choose the option for R3 data source in transfer rules in Infosource and then assign the required R3 data source to infosource. It is advisable to replicate the R3 datasource in APO BW also.
yes, you are correct, if you would like to load the data from a flat file then you need to choose the option of flat file in transfer structure of infosource. Also ensure the data needs to be in the same sequence as the KF sequence defined in Infosource.
Let me know if it helps.
Regards
Gaurav Mathur

Custom Document & Custom Doc Legal Control Extraction into SAP BI

Dear All,
After all the business content for GTS was activated in GTS and SAP BI, the following configuration steps were taken in GTS to extract this data into BI for
reporting:
[1] Integration with Other mySAP.com Components > Data Transfer to the SAP Business Information Warehouse > General Settings > Maintain Control Parameters for Data Transfer [Used ECC as guide]
[2] Global Trade Services > General Settings > Organizational Structure > Control Settings at FTO Level for SAP NW Business Intelligence (BI)
Inserted new records missing when comparing to Assgmt of Feeder System Grouping Org.Units to LLS Org.Units table [/SAPSLL/TCOOGS]
Turned on BI Active flag for all records
[3] Global Trade Services > General Settings > Document Structure > Define Document Types for Application Areas
For each document type in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
[4] Global Trade Services > General Settings > Document Structure > Define Item Categories for Application Areas
For each item category in all the folders, turned on ‘transfer to SAP Netweaver Business Intelligence Active’ flag where it was available to be turned on.
Focusing on custom document and custom document legal control extractors, the data comes from /SAPSLL/CUIT which contains 113K records in development, however, the amount of data extracted into BI is minimal. So I have a few questions:
Did I miss any additional configuration swithces to extract into BI?
SAP Documentation: You have entered a unit of weight in the table for GTS: Control Settings at Foreign Trade Organization Level. This unit of weight must be the common unit of weight that you want to be used in strategic reporting in BI . The values in the fields for gross weight (WEIGR), net weight (WEINE) and unit of weight (WEIDI)
depend on the unit of weight you maintain at FTO level in the IMG for converting weights for SAP BIDoes each FTO need to be insert with different unit of measure? ie FTO123 UoM = EA; FTO123 UoM = CS; FTO123 UoM = KG
Should all the data records from /SAPSLL/CUIT be extracted into Custom Document DSO [0SLL_DS01]? If no, why? If yes, refer to pt 1 and what am I missing?
SAP Documentation: Only data that belongs to the legal controls for the following legal regulations is transferred to BI:
German Foreign Trade Laws
Prohibitions and Restrictions
Other What is the significance of these legal controls that SAP has decided to only transfer this type into BI? If the client want additional legal controls, would it be possible to extract them into BI?
If anyone is currently using the std content for BI reporting, any assistance with my questions would be appreciated.
Sincerely,
Claire

Hi Claire,
Your customizing looks correct. But the amount of data extracted depends on your condition you have defined during extraction(e.g. Creation Date)
Also in the coding only /SAPSLL/CUIT~ITSTA = space (Standard Item) and A (Item is allocated) is considered in 0SLL_CD_1.
You could find out reason by debugging to find out exact reason.
T-code: RSA2 , Enter Data source : 0SLL_CD_1. Then click display.
Click Extract check ( Shift + F8 ) and put break point in coding FM : /SAPSLL/BW_GET_CD_1
Best regards,
Vincent

Settings for SMQS

Hi Everybody,
What are the defaut settings for SMQS in R3 as well as BW. In our server the status is Inactive for all processes. And how to change or register?
Thanks,
Kush

Hi Kushal,
SMQS sttings in BW:
In releases up to and including BW Service API 3.0C, data packages are transferred independently of any enhancements to outbound scheduling (QOUT scheduler) that have since been made available. Settings in the corresponding control transaction SMQS were not relevant. However, in some cases, it was necessary to explicitly deregister the BW destination (see SAP Note 673940).
With BI Service API in Release SAP NetWeaver 7.0 (Plug-In-Basis 2005.1), you can (optionally) switch control of the transfer to the standardized outbound scheduling of the queued RFC. The approaches differ as follows:
● Connected BI system has Release <= 3.5
Default remains unchanged. You perform the switch manually using the RSA1_TRFC_OPTION_SET program. (Prerequisite in Basis Release 4.6C is qRFC version 9 supplement 45.)
Alternatively, the BW destination can be deregistered automatically.
● Connected BI system has Release >= SAP NetWeaver 7.0
The default setting is changed; however, you can revert to the original setting using the program mentioned above.
If you are using standardized outbound scheduling, the number of processes used to transfer data packages to the BI system has to be maintained for the BI destination in transaction SMQS.
In this case, the global data transfer settings (see SAP Customizing Implementation Guide (transaction SPRO)--->Integration with Other SAP Components ---> Data Transfer to the SAP Business Information Warehouse ---> General Settings ---> Maintain Control Parameters for Data Transfer) only effect the number of processes that are used to transfer the data packages from the extraction process to the tRFC for the transfer.
For regestering Go through...
[http://help.sap.com/saphelp_nw70/helpdata/EN/af/d4fa40ee14f26fe10000000a1550b0/frameset.htm]
When Your destination is registered and the queue status changes from INACTIVE to ACTIVE, if the queues contain LUWs that can be processed for this destination. WAITING and WAITCONN appear if the maximum number of connections has been reached or if the scheduler is waiting for a connection to become available again. As soon as a connection becomes available, the status changes to ACTIVE and the queue is processed.
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:27 AM
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:28 AM

Settings for datasource 2LIS_02_ITM in R/3?

Dear Friends,
I am preparing the datasource 2LIS_02_ITM in R/3 for data extraction and the SAP Library shows that there are some prerequisites for using this datasource. The following settings (as below) need to need to be made in R/3. Can somebody explain how to navigate to this setting in R/3? i am not able to find the path for this. Thanks a lot in advance for the help.
Raj
For 2LIS_02_ITM
Prerequisite:
If you wish to transmit data on other processes to the BW Content in addition to the standard processes.
You should Maintain process keys in order for your data to be interpreted correctly in the BW Content.
The path is
Customer-Defined DataSource--> Logistics --> Settings for Purchasing --> Maintain Process Keys for SAP BW

Hi Raj,
See if these help you:
Re: Process Keys in Purchasing Analysis
Re: Process Keys in MM
Re: 2LIS_02* Purchasing extractors
Hope this helps...

OS X Server 4.0.3 Profile Manager Settings for Mobile Users problems

OS X Yosemite 10.10.2 with Server 4.0.3
We are using Profile Manager to control Settings for Mobile Users, and give homeSync to the users. Our problem is that the exclude / Skip items (Items matching any of the following will not sync" This setting is not working an example. I have put this folder to Skip Items ~/Downloads but the home Sync still Syncing items in the Downloads folder.
I have this problem on all the 3 users/machines on that server. Every client is using os x 10.10.1 og 10.10.2 I have check that the profile from the server is on the client.
Has any a solution to that?
Regards
Brian

I have no solution but have experienced failing sync settings (quite often) in both 10.6 Server and 10.9 + Server 3 (upgraded from 10.6 Server) in the same way as you described, it syncs too much. We have given up on synched home folders and will cut them and use other backup methods since we’re not so dependant on switching between different devices. Our users usually have one computer, one iPhone, one iPad and stay with those until it’s time to exchange them.

What is control parameter for commmunication with the BW system

May I know what is control parameter that should be configured/assigned for commmunication with the BW system?

Hi,
goto transaction sbiw->general settings->maintain control parameters for data transfer.
On the fields you get a good help via F1.
regards
Siggi

Reg: UTA ports FCoE, 10GbE flow control settings

Could someone shed some light on the flow control settings for UTA ports, below is the scenario.I am working on the configutation of 4 node 3220 custer. We are using this 4 node cluster for FC and NFS traffic. each UTA port on the node used to serve both FcoE and NFS traffic( UTA port logically acting as FC and 10GbE ports) . However, the flow control is set to FULL on the 10GbE logical port to serve the NFS traffic. I think this flow control settings at 10GbE logical port level doesn't effect the FC traffic flow of the UTA port. the flow control settings would be effective on 10GE logical ports only.. Please confirm this... NetApp recommend to set the flow control to NONE and upper layer protocalls can take care of flow control( as per Best practise). If I want to change the flow control setting of 10GbE logical port, does it effect the data flow of logical FC0E port aswell?Now the actual issues is we are using the controllers mostly to serve FC trafic and we are experienceing Performance issues on all the nodes. current ONTAP version on the controller is 8.2p5we are hitting the latency of 50-80ms, I am trying to track the IO on the controllers, IO is not really high when we had the performace issues, But some times disk utilizations and cpu utlization hitting 80%. Performace manager doesn't have the granularity at aggregate level to track what LUN/volumes are casuing the high utlization at aggregate level..I am using the coomands sysstat -M, sysstat -x, netstat , statit commands mainly. However, I am not sure on any other internal porcesses are causing the high disk uitlizations...Please share your ideas on this..Oh.. another point this.. These controllers are flexpod config.....

Hi,We haven't worked on flow control settings.. you mean you are able to Disable the flow control on CNA cards?We have upgraded these filers to 8.2.3P3. at the moment filers are working fine, no performance issues.. However I wanted to disable the flow control on these ports, if possble. But NetApp docs tell that we cann't disable the flow control on the CNA cards. https://library.netapp.com/ecmdocs/ECMP1368834/html/GUID-31241255-4914-46FF-BDB5-A02DCCEABCCA.html Regards,Chandra

Trade Preference customizing in ECC - Control Settings for BOM Transfer

Similar Messages

Maybe you are looking for