Trading partner missing for Reconciliation account

Dear all,
I'm trrying to post a document where  tranding partner must be mandatory for every G/L accoutns.
But I've noticed that the field trading partner (More Data) is missing only for Reconciliatons G/L accounts.
Is something I've forgot to set in customizing? If yes, where?
Thanks in advance
Alberto

Hi
Trading partner comes at line item level and all the items under a recon account are automatically posted to a recon account.
Recon account need not contain trading partner as all the items under that will contain.
In addition, line item display is not advisable in Recon account and hence again the trading partner field is not necessary.
Caio
Raghu

Similar Messages

  • Open profit center for reconciliation account

    Hi experts
    I need to display the field profit center for reconciliation account and I check  Field Status Group  (OBC4 & OB41). The field Profit center is mandatory.The new legder is not activate
    But when I use the FB01 , the profit center is not available 
    So It s possible to display the field Profit center for reconciliation account without the New Ledger ??
    Thanks for your help

    Hi
    If you are referring to Asset Recon account - You can not enter any Pr Ctr manually in it...
    Just ensure
    1. Cost Center is maintained in Asset master
    2. Maintain KOSTL in T code ACSET for Acq Posting and transaction type *
    3. Create APC account as Statistical cost element
    Whether New GL or not, PC in Asset recon a/c depends on these settings.... You cant enter it manually in the APC acount
    Regards
    Ajay M

  • Trading partner updation in the accounting document

    Dear All,
    We have updated the trading partner in the vendor master. While MIRO I find the same is getting updated in the vendot line items but it is not getting updated in the other line itmes of the accounting document.
    Please suggest hot to populate the trading partner field in the other line items of the accounting documents.
    Best Regards,
    D R Pednekar

    Dear Arvey,
    Thanks a lot for your reply. Still my problem is not solved even after i have created the field chanhe rule in OB32 transaction.. I am redefining my problem so that it will be more clear to you.
    1. I have updated the trading partner in the vendor master.
    2. While MIRO Trading partner is getting updated in the vendor line items -- OK
    3. Trading partner is not gettingupdatedin the other line itmes  such as GR/IR, TAX accounts line items. - Requirement is that the trading partner shuold get updated for all the line items in the accounting document.
    Hope I have clearly defined my problem.
    Best Regards,
    pednekar

  • TPID (Trading partner ) blocked for posting

    Hi Gurus,
    User removing the payment block in FB02 got error message Company code or TPID blocked for posting...
    Please any body give me advise were exactly error ...
    where exactly we created in Trading Partners?
    Advance thanks
    Sudharshan

    Dear Sir,
    When we are maintating the Group chart of account we need tomaintain the Trading partner as a mandatory,
    Before creation of any vendor / customer  or gl account we need to create at trading partner and then we create in company code at the time of creating the master we need to give the vendor code at Tranding partner place.
    In your case Please remove the block at trading partner vendor master record and then remove the block at company code leve.
    Thanks
    Harikishan
    Assign points if useful.

  • To enter Trading Partner data for vendor posting using SGL indicator

    Hi,
    I am trying to post a vendor document using f-02, with posting key 29, with a special GL indicator. I need to input the trading partner data. However, I could not find the field under "more data". There was no "further data" selection. I was also not able to enter the trading partner via the path : Extras -> trading partner.
    Please advice how to pull out the field for trading partner for posting using special GL indicatior. I have checked the PK variant screen and the field status group variant ansd could not find the field trading partner.
    Thanks.
    Angel.

    Hi,
    already maintained in vend master data, OBA7, OBC4, OB41 were also maintained.
    But the thing is, the trading partner field did not appear on the posting screen. I was prompted with an message that trading partner is a required field as I have set it as mandatory. And the system ask me to input under "further data". But i cannot find that option. Neither can I find the trading partner field.
    Please assist.
    Angel.

  • AS2 and Trading Partner Identification for MDN

    Hi,
    I have a scenario where I have multiple Trading Partners that all use the same hub provider. I have setup the trading partners individually in B2B so the trading partner can be identified regardless of the transport server endpoint.
    For inbound documents I use the 'Identifying XPATH Expression" and "Identification Value" to override the default Document Definition so I can see which Trading Partner the Invoice is from, regardless of the hub provider that sent it. This is working fine.
    However, when sending outbound documents such as a Purchase Order the ourbound document is shown correctly :-
    HealthCorporateNetworkWA BBraunAustraliaPtyLtd AS2 - 1.1 GS1_MultishipmentOrder_Doc - 2.5 GS1_MultishipmentOrder_Action Complete 30 March 2009 10:07:54
    Whereas when the MDN is returned it is identified as another trading partner :-
    BaxterHealthcarePtyLtd HealthCorporateNetworkWA AS2 - 1.1 GS1_MultishipmentOrder_Doc - 2.5 Acknowledgement Complete 30 March 2009 10:07:59
    These are 2 seperate agreements that are deployed and I assume that the b2b instance is simply identifying the appropriate Trading Partner Agreement by the AS2 Identifier only ?
    Is there anyway to modify this behaviour ? Obviously I want it to indicate that the MDN is coming from the Trading Partner I sent the PO to ? If I got the hub provider to apply a AS2 Custom Header would I be able to use this instead by adding a new Trading Partner Identification Type and then using that as the identifier in the TP Agreement ?
    Given the MDN is a synchronous response, why isnt it associated with the same TP Agreement ?
    Any ideas ?

    You are using custom over AS2 business protocol where in the identification of trading partner can only be based
    on the Exchange which is by AS2 identifier. The identification of Agreement is happening in the document layer which is nothing to do with whether the Acknowledgement is Sync/Async.
    Ideally you should create the agreement between host and hub provider

  • Trading Partner Block for Postings

    HI Guru's,
    With Enerhgy having a new company code "G1SG", is it possible to block "ENRGHY" in SAP to prevent users from selecting this trading partner.
    Purpose is to just use 1 trading partner for Enerhgy. Now, Enerhgy has 2 trading partners in SAP for users to select from.
    Kindly advise, thanks.
    regards
    JK

    Hi,
    The simplest to do would be to enter "Do not Use" in front of the trading partner text.
    There may also be authorisation objects for it, will check and revert.
    cheers.

  • Trading partner missing.

    Hi,
    I'm facing a problem relating to a trading partner. I forgot to maintain a trading partner in a document posting. The document is already posted. So my question is, "Is it possible to maintain the specific trading partner for the document now? Is it somewhere I can maintain the trading partner for that document?" B'coz I'm facing problem due to that.
    Is it possible in SAP?
    Thanks a lot in advance!

    Hi
    reverse the document , maintain trading partner in the master record and post the document.
    this is the only way to resolve your problem
    let me know if you need any further help
    Regards
    Venkat

  • Foreign currency valuation differences for reconciliation accounts

    Hi gurus,
    we have run the transaction FAGL_FC_VAL - Foreign Currency Valuation (New), now i try to make a report summirazing valuatin differences of the open line items by customer, vendor and gl account. however i cannot found the tables which the valuation differences are recorded. ( i dont find the values in the table bsbw in any FI document)
    the customizing is (tcode oba1)
    Exchange Rate Dif.: Open Items/GL Acct:
    for customers:
    G/L account:     1201xxx
    Bal.sheet adj.1: 1209xxx
    loss: 65xxxxx
    gain: 64xxxxx
    can you help me?
    thx.

    Is there any way to keep track of FC valuation differences by customer basis?
    i dont see how much FC differences occured for a spesific customer!

  • When opening email on Iphone 5 keeps saying password is missing for icloud account? I have checked and triple checked all account details and I can access icloud on all other devices

    New iphone 5: whenever I check my email, as it's checking the icloud account it keeps popping up "Password is Missing". I have checked al my account details and I am inputing everything right and can access icloud on other devices. I've rebooted my iphone and still no go - any suggestions?

    You have to do the following to get your new Apple/iCloud ID signed onto your device:
    1.     Go to Manage your Apple ID and change your Apple ID back to the old email address (do not verify it - this is temporary):
    Apple - My Apple ID
    2.     Go to Settings>iCloud, scroll to the bottom and Delete the iCloud account. Use your current Apple ID password when asked. Follow the prompts to delete the account
    3.     Go back into Manage your Apple ID and change your Apple ID back to your new email address (you may need to verify it again)
    4.     Go back to Settings>iCloud and sign onto iCloud with your new Apple ID. Turn on the options you want sync'd with iCloud, give it a little time to push the info down to your device.
    Cheers,
    GB

  • Keychain Items Missing for Mail Accounts

    Mac Mail keeps randomly prompting me for passwords for certain mail accounts.  I keep hitting "OK" (without changing the pre-populated password) and eventually the account comes online.
    I have noticed the the problem accounts do not have any corresponding keychain item for them.  I have tried deleting accounts and then setting them back up, but no new Keychain item is created (older accounts have corresponding keychain items).  The problem accounts are all POP accounts.
    I have tried Keychain First Aid numerous times.  No problems are identified.

    Well what can tell you about Mail and Entourage,... Mail seems to be better integrated with OS X, and other Mac programs and since it is included with OS X - It Is Free!
    To me Entourage has more the feel of MS Outlook so if you were a Win.. user you would most likely prefer it more. Entourage does have some sync services, ie: contact, iCal events, and notes with .mac, so I guess .me would also work, I don't use .mac/.me so someone else would have to fill you in there... this is my .02 worth.

  • Oracle B2B - Trading Partner identification for Custom XML purchase order

    Hi ,
    How to identify From TP and To TP from the data available in the custom XML?
    Also need know will it be possible to identify the Agreement based on XML data of custom purchase order (Not with File Name format identification)?
    Thank you.
    Regards
    Anvesh Raju

    Hi,
    please refer to below doc for various identification options
    Creating Types - 11g Release 1 (11.1.1.7)
    Generic exchange is also discussed
    Thanks,
    Prasanna

  • No Trading Partner available and US Elimination will Address this issue?

    Hi all
    I have data with NO TRADING PARTNER information for IC Accounts. I am trying to  understand whether US Eliminations can address this issue?   have tested US Eliminations and is workingfine With Trdading Partner  for your information.
    Appreciated your ideas/help
    Thanks
    Ramana

    Thanks

  • Business partner reconciliation account

    HI
    When cteating a  new business partner i want reconciliation account to default to 150000. How do i achieve this
    Thanks
    Rendane

    Hi !
    Check whether you have configured the “Application Parameters” (ONK5).
    Make sure that you maintain reconciliation account for the following parameter values,
    AKTO_KTR  -
    Customer reconciliation account - insurance providers
    AKTO_SZ -
    Customer reconciliation account - patients
    Regards
    Subash Sankar

  • Reconciliation account ready for input

    Dear All,
    While creating GL, if it is a recon account, then it is picked up form the Account Type (ie) either vendors/debtors/assets.
    What is the use of 'Reconciliation account ready for input', Will there be any other recon items other than vendors/debtors, etc.
    Please clarify,
    JEERI

    Dear,
    Reconciliation account ready for input at time of posting - Indicator which determines that the reconciliation account is ready for input when posting a document. The indicator is used in Financial Assets Management like when you make initial load of the asset balances the balances are being posted to Asset Sub-Ledger but not to the GL Account.
    Hence, in such cases, you are required to Reset the Reconciliation Accounts in OAMK and post the same entries into GL Account that you have loaded to Asset Sub-Ledger and then again make them as Reconciliation Accounts.
    Note: On the other hand Reconciliation Accounts are only mean for posting by the System, but when you select the "Recon. account ready for input", it would become like a normal account, it will allow you to post directly, this would invalidate the integrity of the data. Therefore, you should never put the check box Reconciliation Account ready for input for RECONCILIATION accounts.

Maybe you are looking for

  • Is third-party SO/PO  process possible using only one company code?

    Hi friend, 1) my client wants to implement third-party PO process but also wants a way of keeping track of inventory during this process. I know that inventory should be tracked on the vendor side and not on our client side since we're doing third-pa

  • Change Chart background color during runtime

    I want to change the background color of my chart during runtime. I can set and read-out the color with a property node but the apperance on the frontpanel is not changing. After stopping the VI the chart suddenly gets updated. Please check my VI att

  • Help - really stuck - Yahoo email invalid

    I've had my new Balckberry 8900 for a week now and no matter what I try I cannot get my email account set up on it which is driving me mad now. I have a very basic yahoo.co.uk email account with lower case password - could not be easier. When I go to

  • How can I install Photoshop Elements 11 on a new computer with Windows 8?

    How can I install Photoshop Elements 11 on my new computer with Windows 8?

  • cfscript error

    Have a page that works fine on the dev server, but crashes with the following error on the production server: Context validation error for tag cfscript. The start tag must have a matching end tag. An explicit end tag can be provided by adding </cfscr