Trading Scenario in SAP

Hi all,
I am working for a project where there is total trading scenarios. No manufacturing at all. But the scenario is like when the PO is received from the customer then only all the procurement process begins:
1. Sales order Created & requirements generated.
2. Purchase order is created & sent to the vendor on the basis of the sales order.
3. Goods Receipt done on the basis of the purchase order & invoice receipt.
4. Goods confirmed for the sales order to confirm the schedule lines.
5. Create delivery.
6. Goods Issue.
7. Customer invoice.
So after receiving the purchase order from the customer all the processes start. So this is like a MTO scenario.
So what requirement class & requirement type do i need to use in this case. There is absolutely no manufacturing, just procure & sell.
With best regards,
Niyaz Sayyed.

Hi Niyaz,
Use the requiremnet class 045 (in t-code: OVZG)
Use the requirement typr KEV (in t-code: OVZH)
And in schedule lines do the following:
Mvt type - 601
Order Type - NB
Item Cat - 0
Acct Assgt Cat - M
Incompl. procd - 31
Hope this would help you out.
Regards,
Ganpath

Similar Messages

B2B scenario in SAP PO

Hi Experts,
We have to start with the development of B2B scenario in SAP PO 7.4.
The scenario is as mentioned below :-
SAP ECC ------> SAP PO -----> B2B VAN Provider----> (various customers)
After going through some of the blogs, listed few points which seems to be confusing to me -
1) How the TPM configuration could be done in this case? We tried with one doc but its somehow confusing.
(http://scn.sap.com/community/b2b-integration/blog/2014/01/28/trading-partner-management-part-1)
2) How the configuration will be done? Creation of party, agency and schema? Identifiers tab of the communication channel.
(http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660?QuickLink=index&overridelayout=true&5003637721826
Gone through the above mentioned link, got confused about the configuration part.
As per my understanding,
Sender party --> no need to create as landscape is same.
Receiver party --> Mandatory to create, but what needs to be put in Agency, Schema and Value?(around 50+ customers for one VAN)
Is my understanding correct? Please correct if i am wrong.
Please guide, if someone has worked over B2B SAP PO 7.4.
Thanks!
Br,
Nidhi

Hi Nidhi,
for your second question integration to VAN. you only need to maintain the identifier (AS2 identifier) for VAN and VAN will distribute/route the message to customer.
regards,
Harish

Mapping of Scenario in SAP

Hi Masters,
I would like to know how to map the scenario in SAP.
Client is 1000.
There are 3 companies 2000, 3000 and 4000.
Co 2000 is involved only in manufacturing. It receives raw material from Vendors and then manufactures in its own plant 2001.
Co.3000 is involved only in logistics. It takes delivery of the Fgoods from plant 2001. Ownership of the Fgoods transferred from 2000 to 4000. The Fgoods are stored in Warehouse (3001), which is owned by Co.3000.
Co.4000 is involved only in marketing of the Fgoods. It receives Orders from Customers and deliveries are made from Warehouse 3001. Bills are made by Co 4000 and payment collected.
Co.3000 owns Warehouse alone and acts like a C & F agent. Co.3000 gets paid by Co.4000 on the basis of the FGoods value that is stored and taken care.
How to map the scenario in SAP.
Thanks in advance.
Vaidee

Ok,
Then Configure CCode 2000 and make one Plant 2001 and assign it to 2000. Make one sales organization 2001 for this. And also some DC.
Then Configure 3000, and make one Plant ( for storing ) plant and assign warehouse number 3000 to that plant.
Then configure 4000. and make one plant ( for distrbution of goods) , make one sales org 4001, and DCs and divisions.
Now the process :
You wil create inter company STO between 2000 and 4000. And the Warehouse of 3000 ( may be ) assigned to the plant of 4000.
Make Company 3000 as C and F agent and assign as a partner.
Rest all functionality can be done as per standard.
This is my personal view, other experts comments are also welcome.
Thanks,
Raja

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

Webinar: How to implement secure scenarios with SAP NW PI 7.1

SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, August 18, 2009:
How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
Makoto provides the following abstract:
In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
supported scenarios of secure SAP NetWeaver PI deployments.
SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
(no passcode needed)
Dial in:
For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
Kind regards,
Sarma Sishta
SAP Intelligence Platform & NetWeaver RIG APJ

hi,
I'm making this a sticky thread till August 18 so it will have better visibility
Regards,
Michal Krawczyk

How to deal these two scenarios in SAP.

Hi All,
My company is Software company.My company is having many clients.
1)Whenever we require some materials for client project he provides us required materials and our company uses them for job, there is no change in state/value of tool, we send back the tool after usage
2)Our vendor will place the material at our place and we will pay
the rent for every month or quarterly.
how to deal these two scenarios in SAP.
Regards,
Purush.

hi
create new material type for this
>1)Whenever we require some materials for client project he provides us required materials and our >company uses them for job, there is no change in state/value of tool, we send back the tool after usage
u can just tick for quantity update for that material type in OMS2
then u can take it using 501 Q
>2)Our vendor will place the material at our place and we will pay
>the rent for every month or quarterly.
for this u can make quantity update as above and give the rent payment from FI side using FB60
regards
kunal
updating

Plz Give me real time file to file scenarios in sap xi

Hello Experts,
Can any one give me the real time file2file scenarios in sap xi. And differnet file structures
and different 'File Content Conversion' objects. Explain me different approch for file2file with different scenarios.
Thanks in advance.
Arjun.

HI Arjun,
Go throgh the following links for File content conversion in the sender side as well as receiver side
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
NAB the TAB (File Adapter)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
Content Conversion ( The Key Field Problem )
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Regards
Sridhar Goli

To migrate SAP business connector scenario to SAP XI.

Hi,
I want to migrate my IDoc-http sap bc scenario to sap xi.
1:What the basic things do i need ?
2:what basic steps do i need to perform to migrate a sap bc scenario to sap xi?

Hi Shewta,
from a BI perspective, please check the HowTo-Papers available in this area.
You find them at:
<a href="https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000073641&_SCENARIO=01100035870000000202">SAP Service Marketplace HowTo guides</a>
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Back charges scenario in SAP

Hello friends,
I need help to map below scenario in SAP:
We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process .
Note:
We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
Seeking valuable inputs from experts.
Regards
Ravi

Hi Ravi,
Your scenario is similar to "warranty'.
You should not charge-reduce- V1's bill against V2's bill.Rather it should be against the V1's open item;
try " noted item" for V1's payment against V2's bill.This should solve your problem.
Regards
Ramesh

Trading partners in SAP

What is the purpose of trading partners in SAP.
If setup in which areas in FI would they be used?
Thanks
Venky

Hi Venky,
Re: Intercompany Sales in Planning
Company ID and Trading Partner
Key Integration Points:
- Company ID is the smallest element in a corporate group structure that can be used as a basis for consolidation. Company Id is also called Trading Partner.
- Company ID or Trading Partner is VERY, VERY important in SEM-BCS because that will be key for defining inter-company transactions and elimination of inter-company transactions.
http://www.sapprofessionals.org/?q=sem_bcs_key_design_considerations_for_integration_points
Hope this helps
Please assign points as way to say thanks
Ravi

IDES Bus Scenarios for SAP IS-OIL solutions

Will anyone provide url for Business scenarios for SAP IS-OIL SD and MM modules

Here is the link go through it,
http://help.sap.com/bp_bblibrary/600/HTML/X14_EN_AU.htm
Regards,
Rao

Trading scenario: Keeping ED/Tax same in SO as in PO

Dear all,
I have to create the trading scenario wherein the goods are purchased and sent to the customer. While i am creating the sales order, I want to keep the excise and/or VAT same as initially captured through purchase order. Because price may change in the SO, how to keep ED/Tax same as in PO? Is there any link that can be set between SO and PO?
Thanks in advance.

Hai,
Prepare two condition types for excise duty and Taxes and create a condition table with the unique combination to identify imported material.
So that the data of ED CVD will flow in the sales order.
I think details will not flow from PO to sales order pricing procedure.
Regards,
Mani

How do we map this scenario in SAP ECC

Hi Gurus,
I need a help from you, to get your perspective on how the below mentioned business scenario can be mapped in SAP ECC.
Scenario: The client is engaged in a business of supplying surgical kits to hospitals. The surgical kit is actually a case with two shelve in it. Tray 1 holds the equipments for surgery and the Tray 2 holds the implants for surgery. There are various different kits depending upon different surgeries. Depending upon the need/demand from the hospital appropriate kit is sent to the sales rep, who then delivers the kit to hospital. Now when the kit is supplied to the hospital, the surgeon uses the equipments from Tray 1 to perform the surgery and consumes some of the implants (as needed) from Tray 2. Once the surgery is done, the equipments are cleaned by the hospital and the kit is sent back to the sales rep.
At this point the sales rep need to raise an invoice to the hospital for the implants that were consumed from the Tray 2 and also need to charge for the service for using the equipments. Both the equipments and implants have serial numbers and each kit has a serial number.
Ask from the business
1.They should be able to track which kits are out in the field and should be able to see the inventory within the kit.
2.Should be able to consume the implants from inventory, which have been consumed during surgery and raise an invoice to the hospital for consumed implants.
3.Business should be able to charge for the equipments used
4.They should be able to track the inventory in the kits
5.They should be able to depreciate the equipments in the kits.

Hi,
You may please check in this forum
Also, please explore whether [IS-Healthcare|http://help.sap.com/content/documentation/industry/docu_is_health.htm] helps you finding a solution.
Regards,
P Gomatheeswaran

Idoc Scenario from SAP to SAP via PI 7.1o

Q: Two idocs will process from SAP to SAP via SAP-PI 7.1o and generated together.
Requirement :
Sync
2 IDOCs – as we explained our design will require two IDOCs. The first IDOC will be developed by a Z code and the second IDOC is generated by 100% Standard SAP BAPIs and 2 IDOCs send them to PI. Both IDOCs will be generated together by process code in sap and must be moved to PI and later to the receiver client together(SAP). The process can only be 100% completed when both IDOCs will be processed with success in the receiver side. Any one of the IDOC among 2 idoc's failed all the process should stop.
i think that is not possible , PI will not be able to stop successfull IDOC If another IDOC get fails .
Please give me approaches if any chance .
Thanks, Sanakr

Hi Bhavani,
You can use BPM with correlation to achieve this scenario:
Demonstration of ccBPM Scenario: SAP PI 7.1
**************** - BPM Scenario using Fork and correlation
Regards,
Suman

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Trading Scenario in SAP

Similar Messages

Maybe you are looking for