Trading scenario with AED (Tax procedure- TAXINN)

Hi,
I've a query. My client procures a material from a vendor, which he imports. When he sends invoice to my client the details are as follows-
Base value- 8440 (Including BEDAEDEcsee+SEcess)
VAT 4%- 338
Total invoice amt- 8778/-
But vendor paas on the duties as follows.
BED- 571.60/-
AED-167.54/-
Ecess-11.43/-
SEcess-5.72/-
I've tried this with normal trading procedure. I've created a PO with 8778(8440+VAT 338).{In FV11, rates maintained are 0% with 100% set off}
In MIGO, I've selected MRP indicator, n maintained base value as 7683.71(Excluding duties) & maintained BED,AED,Ecess & SEcess in respective fields.
Accounting entries are correct.
But problem arises after I capture & post exc invoice. In MIRO,
the vendor account should be credited with 8778 only, but it's showing more than this(9000+). What will be the reason?
But when I do MIRO before posting exc invoice, it's working fine. But I'm not sure whether this will come under standard SAP procedure.
Please guide me on above issue. And let me know whether we can map it in standard SAP?
Thanks & Regards,
Piyush

Dear Piyush,
This is nothing but normal trading procedure , have you maintained AED condition in FV11 with set off condition?
Regards
Kedar

Similar Messages

CIN tax procedure TAXINN

hi all,
in
Logistics - General - Tax on Goods Movements - India - Basic Settings - Determination of Excise Duty - Select Tax Calculation Procedure
if i choose to have tax procedure TAXINN,
in
Logistics - General - Tax on Goods Movements - India - Basic Settings - Determination of Excise Duty - Maintain Excise Defaults
i can only define 1 condition type under CVD cond. field..
what if i have a few several more condition type to be defined?
because in J1IEX, the Total BED value is taken from the condition type defined in CVD cond. field.
how is it possible for me to add in a few more condition type into CVD cond. field?
i have tried adding the other condition types under field like A/P BED Cond. and A/P SED Cond. but the value was not being captured in J1IEX.
anyone can advice?
thanks.

Hi all,
my scenario is i need to have the following condition type(customized) to be populated in the excise invoice.
Z001 - Z004 are the customized condition type for their respective tax.
CVD - Z001
Edu CESS - Z002
Higher Edu Cess - Z003
S.A.D - Z004
IN
Tax on Goods Movements - India - Basic Settings - Determination of Excise Duty - Maintain Excise Defaults
since i am using TAXINN, i have managed to tagged Z001 to CVD cond field and the value was able to come out in J1IEX correclty.
what about Z002 to Z004? do i need to switch to TAXINJ so i can populate them into A/P BED cond, A/P SED Cond, A/P AED Cond? what are the alternatives for TAXINN?
i read somewhere that for india implementation, it's best to use TAXINN, as TAXINJ will be obsolete soon. - correct me if i am wrong.
I will need to populate all the values above to in J1IEX so that in my RG23D form can capture and display the value from Z001 to Z004.
thank you.

Error in F-44 tax procedure taxinn tax cd V1 change/ deleted incorrectly

While clearing vendor in F-44
in Tax procedure taxinn taxcode v1 changed incorrectly or deleted error is occuring. paymnet of bill is from one company code and invoices are in different co code.
Please help

Hi,
Check whether the taxcode V1 exists in country IN in FTXP.
Regards
A

Trading scenario: Keeping ED/Tax same in SO as in PO

Dear all,
I have to create the trading scenario wherein the goods are purchased and sent to the customer. While i am creating the sales order, I want to keep the excise and/or VAT same as initially captured through purchase order. Because price may change in the SO, how to keep ED/Tax same as in PO? Is there any link that can be set between SO and PO?
Thanks in advance.

Hai,
Prepare two condition types for excise duty and Taxes and create a condition table with the unique combination to identify imported material.
So that the data of ED CVD will flow in the sales order.
I think details will not flow from PO to sales order pricing procedure.
Regards,
Mani

Tax Procedure (TAXINN)

Hi All,
I am doing TAXINN configuration on my ECC6 system. In the tax procedure all condition types are not available (Education Cess, Higher Education Cess etc.). If anybody can provide me the complete list of condition types with AcctKey, it will be of great help.
Thanks.

Hi,
For Edu Cess you can use condition types JECS (SD) and JECX (FI) with account key EX1.
For H Edu Cess you can use condition types JA1X (SD) and JA1Y (FI) with account key EX2.
Thanks & Regards,
Ratish

Condition value is zero in TAX procedure TAXINN

Dear All,
Myself in an implementation project. Have configured CIN. There is a problem in Tax procedure.
Our access sequence is tax classification.
In PO i have mentioned the tax code and when i click taxes button the condition value for BED condition type is ZERO. (actually it should be 200 INR). But the calculation thereafter is correct. ie, Primary education cess on BED is 2% on BED is 4 INR .
Expecting your valuable suggestions..

hi
please check following details
J1ID for material
condition maintain in FV 11
GL assigned in OB 40 for tax code
tax code assigned to company code
Regards
sangita

Error: Tax cod OI country IN does not exist in procedure TAXINN

Hi all,
while posting invoice, i am facing an error
"Tax code OI country IN does not exist in procedure TAXINN"
I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
I think i missed some thing in the configuration part. Please guide me.
Thanks!
Pavan

Hi,
1. If tax is deducable in nature means if you are using CIN then assigm Tax code
SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
here assign tax code with company code .
2. If while doing miro you are getting Tax Code" VN" Instead of OI
then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
You can use data base tables also for your Tax code if you know tax conditions used there
T Code : SE16
Table : A363
A358 Country/Plant/Ctrl code/Material
A357 Country/Plant/Ctrl code
A362 Country/NBM-NCM Code
A971 Tax Code
A359 Plant/Matl group
Hope Help u !
Regards,
Pardeep Malik

How is pricing procedure in MM linked with tax procedure ?

how do we link a pricing procedure with a tax procedure for a particular vendor material combination?
eg RM0000 is applied to standard order which contains condition type eg gross price PBXX and tax procedure applicable is Taxinn which contains condition type BASB ...now how is BASB value determined for further tax calculations???

Hi,
Whlie createing the tax condition in M/06 you have to check the Condition category It should be D and then the link is mentioning the 352 as calculation type against BASB condition type in tax procedure.
Warm regards,

Are tax procedures TAXIN and TAXINN same?

Guys, in OBYZ transaction I don't find TAXINN, I find only TAXIN. Are these one and the same? If not, how do I activate TAXINN in the system?
Regards,

Hi,
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique. The standard system comes with two tax calculation procedures:
- TAXINN - IN; India taxes new
- TAXINJ - Sales Tax India
TAXINN:
1. It is Condition Based Tax procedure.
2. Tax Code is required to be maintained in Condition Record, & if Tax Code is not found in Condition Record, Sales Cycle will go upto billing, but not release to accounting. Hence even a single Tax code may suffice the requirement for different Tax rate.
3. Tax condition record is maintain through TCode FV11.
4. It only supports condition-based excise determination.
TAXINJ:
1. It is Formula Based Tax procedure.
2. It was most commonly used upto initial phase of R/3 4.7, but the latter implementations were with TAXINN.
3. Tax Code plays a vital role, as the Tax Rate are maintained in Tax Code in TCode FTXP..
4. It is complex compared to TAXINN
5. It can supports both condition-based excise determination and formula-based excise determination.
6. For Example, code for 362 routine for Condition formula for alternative calculation type
Activation steps are same as above:
>Go to transaction code OBCO to define the tax procedure TAXINN and TAXINJ.
>Then assign country to tax procedure in transaction code OBBG
Regards,
Jyoti

Pricing Procedure vs Tax Procedure

Dear all,
The scenario is as follows
My company purchase material from a trading company which imports the materials from other countries.
In PO we have maintained import pricing procedure so that we can take the duties paid by trading company during import.
We pay duties to the trading company.
Taxes are also involved in this.
I have created a pricing procedure for this seperate where there is a line with 'condition value' = total of
[ Net price of materialCustoms dutyCVD+ECS on CVD + SEC ECS on CVD + AED]
Now we all know tax should be calculated on this total amount.
In normal case the Net price will come as the base price for tax calculation which is here wrong.
I want this total amount to be the base amount for tax calculation in tax procedure.
What i need to assign in the pricing procedure against this 'total' so that it is taken as base amount for tax calculation
How to do this?
sapmmlearner

Hello,
As per your said scenario:
My company purchase material from a trading company which imports the materials from other countries.
In PO we have maintained import pricing procedure so that we can take the duties paid by trading company during import.
We pay duties to the trading company.
Taxes are also involved in this.
I have created a pricing procedure for this seperate where there is a line with 'condition value' = total of
Net price of materialCustoms dutyCVD+ECS on CVD + SEC ECS on CVD + AED
Now we all know tax should be calculated on this total amount.
In normal case the Net price will come as the base price for tax calculation which is here wrong.
I want this total amount to be the base amount for tax calculation in tax procedure.
What i need to assign in the pricing procedure against this 'total' so that it is taken as base amount for tax calculation
My question is if your company and your vendor /supplier (Is a trading company from where you are procuring the materials) are geographically located at the same place (such is within country in same place or within country at different places, etc)
means, then you should not worry about the Import duty. Because for you, when you procure the goods it should be treated as Inland/Domestic procurement (by the by your vendor, who is trading company procures materials from Abroad, that is his risk or his duty to pay the Customs duty or Importation clearing charges, etc since he is procuring from outside the country through Import procurement process, so don't worry for that).
Hence when you order the material through standard PO to your vendor (that is trading company), then Logically it must be Domestic pricing procedure (there is no involvement of import duties, importation, etc), that means system will pickup the Pricing procedure - Domestic - which consists of Gross price, and all other suitable pricing elements which are in currently used in your company (for the vendor) and part from the tax condition elements such as Basic excise duty (BED), SED, AED, Cess, etc... these are not part of the Pricing proceudre, but relevent to the Tax procedure. So which can be arranged in a sequential order for the Tax procedure - TAXINN - which is currently in use from any industry - for calculating the tax amount for the item that you procure from the supplier or vendor. And thats how you (your company) will pay the Duty or tax amount agains the goods that are procured from external source.
Please note: the tax caluclation is always based on the Base amount, not on anything else, that is based on the total ordered amount through the PO. And the tax amount is always interm calculated by adopting the suitable tax code in the PO (in item details), provided you have to maintain all these tax condition elements in a Condition records through FV11 t.code. then once the tax code (i.e., Input tax - which is tax on purchases) is adopted for the PO, system will pick all the valid condition records and sum the total tax amount in the PO.
Maintainaing of condition records is required, because the tax procedure which is a Condition based tax calculation procedure. hence you have to maintian the condition records as you said. Then it will calculate correctly.
Hope it clarifies,
Regards,
Sapsrin

Query for MM Pricing Procedure & tax Procedure

Hello,
Can someone advice me on following.
I need one Condition in MM Pricing Procedure : Discount should be reduced after Calculation of Excise duty and Taxes on PO.
Discount should not be calculated for Excise Base amont & or Tax (CST /VAT) base amount.
Calculation
Basic :          100
Freight            20
Subtotal        120 (Excise Base)
Excise duty:   30
Subtotal:       150 ( Tax Base)
Tax   @4%       6
Subtotal        156
Discount         10
Total Price     146
My Requirement is how to add Discount at the Place shown above.
Regards,
Manish

Dear Manish,
                    After subtotal 120 put in subtotal column 7 and after subtotal 156 put 1.
Truly, I was bit surprised to see your first post, now I got the reason what kept you held.
I tell you why this happens.
I believe you are using tax procedure TAXINN. The routine 362 (in tax procedure) has the program which fetches the data from your pricing procedure and on what amount the taxes have to calculated is the value passed into BASB condition type of tax procedure. One should always read the routine 362 in tax procedure with the help of ABAP consultant. This will give you clarity on the concept of calculation. the subtotal field i.e is KZWI plays important role in calculation.
Currently I do not have access to any test system. If you put the subtotal what I have mentioned the result will come.
Another layman tip I am giving you for tax procedure calculation. where ever you are calculating subtotal just give value from 1 to 7 in subtotal column with different combination one by one and see the results, you will have good idea how the system behaves. Say if you put subtotal as 1, the system response will be different from if you give subtotal 4.
Why this is important to understand is when in future if you are going to add any new condition type you will know how the system response is towards the tax calculation.
That is why I suggested you to read the routine 362.
Moreover, if I see your procedure, excise duty, CST and LST should not be calculated on freight charges. Legally this is not correct. Freight charges are in the preview of service tax. In many implementations I came across the similar scenario where the client insisted on the similar procedure. This all happens due to ignorance of client. We have shown the client the official documents as well we also arranged the official meetings with excise commissioners to clear there doubt.
This scenario is usually insisted in the case of freight billed what client says. this is not correct.
Regards
Rajesh

Pricing procedure+TAXINN

Pl. give me configuration documents on Pricing +TAXINN procedure.
E mail [email protected]
Thanks
Vaibhav

In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario's. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better):
Country Version India comes with four pricing procedures as follows:
1. JINFAC (Sales from manufacturing plants)
2. JINEXP (Export sales)
3. JINDEP (Sales from depots)
4. JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Enter each of your excise registrations, specifying a four-character code for each Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
1. Which taxes the registration covers (additional excise duty, special excise duty, and cess)Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
2. The maximum number of items to be printed on each excise invoice
3. Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
1. Specify whether it is a manufacturing site or a depot.
2. Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, Multiple credit
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
1. Define excise series groups based on type of outgoing document
2. Assign series group to excise registration ID
3. If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
4. If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
1. If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
2. If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
1. Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
2. Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
3. Specify the conditions in the sales order that are used for excise rates.
4. Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing Basic? India?for Logistics - General, by choosing Taxes on Goods Movements Account? Excise Duties Using Condition Technique and ...?Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data?access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.?
You maintain the following types of data:
1. Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
2. Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type - for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
3. Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
4. Material master data
Each material is assigned a chapter ID.
5. Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Let's assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
1. For taxes on purchases, use the condition types contained in the tax procedure.
2. For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
In this IMG activity, you specify which G/L accounts you will use to record which taxes. You have set up G/L accounts for each of the processing keys listed below.
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
1. VS1 (basic excise duty)
2. VS2 (additional excise duty)
3. VS3 (special excise duty)
4. VS5 (sales tax setoff)
5. MWS (central sales tax)
6. MW3 (local sales tax)
7. ESA (service tax)
8. ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
1. Excise group
2. Company code
3. Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
1. Defined the G/L accounts
2. Defined the excise groups
3. Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
? Material Master ? Logistics General ?1. Go to IMG Define Structure of Data Screen for each?Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
Reward points if helpful,
Rewards,
Archit

Questions about CIN tax procedure choice and pricing schemas

Hi all,
I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I would to understand better which are on behalf of one choice or another.
b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport, etc.).
Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
Thanks in advance
Gianpaolo

hi,
this is to inform you that,
a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
CIN - TAXINN and TAXINJ
b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
b.b. you can create your own pricing procedure for this and go ahead.
hope this clears your issue.
balajia

Discount in Tax procedure

Hi,
    My Client want to make a PO with requirement is as follows
Basic Price -                                 100   (which will come in pricing procedure)
Basic Excise duty -                         10   (which will come in tax procedure)TAXINN
Ecess                                              2   (which will come in tax procedure)
Sub total                                       112
Discount                                          -5   (which will come in tax procedure)
Sub total                                       107
VAT                                                 4   (which will come in tax procedure)
AVAT                                               1   (which will come in tax procedure)
Final value                                      112
Now My question is how to Include condition type of discount in tax procedure. I mean what shall be condtion class, Calculation type, and condition category. As of now i have maintained in condition type in tax procedure in TAXINNcondition class as "Tax" Calculation Type "Percentage" and Condition Category as " tax". But what happening if i give discount as 5 % the so it should be subtracted from the sub total amount , which is showing in calculation but when i do GRN Discount amount is getting added to the inventory (rather it should have been deducted)
   How to solve this Discount issue , it should be subtracted in the inventory rather that adding to that

Hi there,
Check the account key for the discount condition type, and make it deductable in transaction OBCN.
I belive the discount condition type you have included in the TAXINN.
Note: But as far as my experience goes discount should be included in the pricing procedure, an ays it totally depends upon the client's request.
Regards
Sujoy

Define tax procedure issue

Dear SAP Gurus.,
When we define tax procedure TAXINN in t.code OBQ3 three option is there ,manual, required, statistical these are three check box option is there, when i was tick the check box of statistical indicator after i was going to post a invoice document with tax code A0 in t,code F-22 but system has not accepted to post invoice document,the system showing error message like tax code A0 not defined in the procedure of country IN in procedure of TAXINN,but i have done configuration everything fine.but when i was untick the check box of statistical indicator then i was going to post a invoice document with tax code A0 in t.code f-22 the system accepted to post a invoice document with tax code A0. i have done this in development server, i am facing that same problem also in production server,so now my question is before going to touch with production server i need some clarification,why should tick check box of statistical indicator or why should not tick check box of statistical indicator in t,code OBQ3,if i will tick check box of statistical indicator in t.code OBQ3 what problem i need to face, if i will not tick check box of statistical indicator in t.code OBQ3 what problem i need to face, finally my question is it should be tick or it should not be tick in statistical indicator box in .code OBQ3.please any one help me because i am facing this problem in production server, so before going to touch with production server what i to do

when i was maintaining statistical indicator field in t.code OBQ3 whilst i was trying to post a invoice with tax code A0 in t.code F-22 The system has not accepted post a document,when i was not maintaining statistical indicator field in t.code OBQ3 the system has accepted to post a document with tax code A0.i have done this in development server, i am facing this problem also in production server ,so in production server there is also statistical indicator field are maintained , so before going to touch with in production server we should maintain or we should not maintain statistical indicator field in t.code OBQ3, my senior consultant asked me this questions what i tell him

Trading scenario with AED (Tax procedure- TAXINN)

Similar Messages

Maybe you are looking for