Tradition DAQ installed but unavailable

Hello,
I have a system that had LabVIEW v6.0.2 executables running with NI-DAQ 6.9.3f3 with a PCI-6052E. I have now installed LabVIEW 2009 with both Traditional NI-DAQ 7.4.4 and NI-DAQmx 8.9.5 on this system. My 6052E shows up in MAX under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy), but under Legacy, the 'Test Panels...' button is grayed-out and if I get the properties of this device, the subsequent dialog's 'System' tab has the resources box grayed out as well as the 'Test Resources' and 'Run Test Panels' buttons grayed-out. I've tried resetting the device under DAQmx, but it doesn't help. I have run a self test of the 6052E by right-clicking the device under DAQmx and it passes.
Another problem I've noticed is when I try to run any traditional LabVIEW DAQ example, I get the following error repeatedly: "Error loading "C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\Daq\lvdaq.dll". A dynamic link library (DLL) initialization failed." This occurs for every traditional DAQ VI that tries to load.
LabVIEW DAQmx examples load and run fine.
This sounds like a corrupt NI-DAQ (Legacy) installation. My goal is to get my code running under the latest NI-DAQ (Legacy), and then transition to DAQmx. What is the best way to proceed getting this new NI-DAQ (Legacy) to run?
Thanks,
Greg
Solved!
Go to Solution.

Got the problem solved by repairing the NI-DAQ 7.4.4 (Legacy) install via Windows 'Add or Remove Programs'.
Greg

Similar Messages

QuarkXpress (Classic) new font installed but unavailable

I need Gill Sans in my QXpress in Classic. I even put it in every font folder in Tiger and in QX itself, but it's not available when I get into QX. I'm new to Tiger and frustrated. I use this font in AppleWorks all the time. How to access it in Classic program? Validate passed the font. Could have I installed it incorrectly since there's no hard manual with Tiger?

In Classic, only one font folder is relevant - the System 9 system folder's fonts folder (/System Folder/Fonts). Furthermore, the font must be in a format that is compatible with System 9; the Gill Sans that comes with Mac OS X is a .dfont, so it isn't. So the solution is simple: (1) Get yourself a version of Gill Sans that is compatible with System 9, and (2) put it in /System Folder/Fonts. You can obtain a PostScript version of Gill Sans (which will work with System 9) here:
http://www.myfonts.com/PurchaseOptions?familyid=3828&id[]=10956

Which traditional daq example will be best for thermocouple temp measurements?

Hi,
i have a PCI 4351 card connected to a TBX 68T connector block which is used to measure the temp using thermocouples. it uses an analogue input from the thermocouples, but the card is only compatible with traditional daq programming.
i have looked at the example finder, and under the folder 'Hardware and software' click the sub folders 'traditional daq', then click 'analogue input' and finally click the 'general' sub folder and you will see a list of example vi's, if you have the traditional daq installed. but i do not know which will be of great benefit to my work. please help.
does anyone know of a good example that i can use and relate to my work and devices? it would be of great help as i am new to daq.
thanks!
Notay

Hi Notay!
Sorry about that, thos sub Vi's are part of the analog in library of daq. Most likely you will only need the traditional daq driver and the correct configuration of your hardware. Im attaching the VI's, keep me updated of your results and if you need something else let me know.
Best of luck!
Oswald Branford
Attachments:
(Sub) 4350 Parse Settings.vi ‏16 KB
(Sub) 4350 Remove offset and get CJC voltage.vi ‏24 KB

PCI-6703 on MAX traditional daq but not on daqmx

Im using MAX 3.1.1 (with NI DAQmx 7.3.1f0) and its listing my device 6703 on the traditional daq list but not on the DAQmx. I'm trying to utilize the Express VI to use this card but since it does not apear on the list I can use it. I already tried F5 several times.
Thanks fot the help.
--Aaron

PCI-6703/6704 are supported by traditional nidaq, and nidaqmx 7.4 and higher.
They are not suppoeted by NidaqMx 7.3.
if you want to use Nidaqmx, upgrade to the latest NIdaq driver.

Traditional DAQ support in LabVIEW 2010?

Hello,
Been researching this a while and I must admit, I am quite confused. I am trying to run a program written in LV 7.1 using traditional DAQ vi's in LV 2010. I think what I need are traditional DAQ drivers, but I cannot find the correct drivers. Plus I'm unsure if I will run into compatability issues. If someone could point me in the right direction I would very much appreciate it!
Old machine:
PCI 6040E
LV 7.1
Win XP
New Machine:
PXI 6251
LV 2010
Win 7
Thanks
Solved!
Go to Solution.

Dirk H. wrote:
... Finally, due to errors, I was forced to LabVIEW 2010.
What errors?
Finally, due to errors, I was forced to LabVIEW 2010. Now I'm looking for the traditional DAQ(to minimize my work) for the old software.
LabVIEW 2010 would require Traditional DAQ 7.4.4. http://digital.ni.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298
Dirk H. wrote:
I have a PCI-6503 and a PCI-MIO-16E-4(along with a PCI-GPIB board). ... Am I forced to upgrade any or both of the DAQ cards? All of the cards appear to be installed successfully by viewing them in Measurement and Automation.
This page lists the required DAQ software for each device: http://zone.ni.com/devzone/cda/tut/p/id/6910. That page indicates both of your devices are supported by Traditional DAQ 7.4.4.

HT4623 now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and

now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and i do but nothing new i need a solve for my proplem now !!

That message usually indicates that the phone was either hacked/modified or jailbroken?
Was this phone ever locked to a different phone carrier?

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much.

Can I install an older version of traditional DAQ that support legacy DAQ with DAQmx for support of a new card?

I have a LabPC+ that works fine, but is not supported in the latest versions of NI DAQ. I also have a 6024E that I would like to use. I know that the version of DAQ that supports the LabPC+ also supports that 6024E, but I would prefer to use the latest DAQmx with this. Is this possible?

Hi Brain:
Doesn't look like it, the PC+ will only go up to 6.9.3 tradition DAQ
http://www.ni.com/support/daq/versions_legacy.htm
while the 6024E will go up to 7.4.1 traditional or 7.5mx or 8.0mx, dependiong on OS.
http://www.ni.com/support/daq/versions_pci_pxi.htm
I assumed these cards were PCI based.
I am not a DAQ expert, so hopefully someone can verify this.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Is there any incompatibility between Labview 8.5 and Traditional DAQ?

Hi, I`m using a DAQPad 6020E and the Labview 8.5 Daq assistant don`t detecte my DAQ when a try to create a new task (to create a new virtual chanel). But MAX detect the DaqPad. So, is ther any incompatibility between Labview 8.5 and traditional Daq? Do you know how can I resolve this?
Thanks.

First, you posted to the wrong board. Measure is an old add-on for Excel.
Second, there is no incompatibility between LabVIEW 8.5 and tradtional DAQ. There is an incompatibility between traditional DAQ and DAQmx which is what the DAQ Assistant uses. Make sure that you install DAQmx if your device is supported by it. Otherwise, you will not be able to use the DAQ Assistant.

Traditional daq

we transfered a VI to an other computer. (LV 8.0 -> LV 8.0, standardinstallation on both pcs, windows)
there are 5 force sensors, 5 way sensors and 5 termocouples.
force and way with daq assistant, thermocouples with traditional daq.
in the older version where the thermosignals converterted by a poly subvi called
[b]'AI sample channels (single point waveform).vi'[/b]
this sub vi is missing ... the strange thing: it is missing on the old installation too, there is no possibility to transfer it directly.
i searched some samples and here where this subvi also required and cant be found by the program itself.
is this a standard vi? is there a better solution to convert traditional data?
i have no experience with traditional daq ...

when you install the daq drivers (2-3 CDs) I think you have to explicitly select that you want to install traditional daq for your LV version (8.0). Doing so should put the appropriate vi in your LV folder. You should also be able to replace traditional daq calls with the new DAQMX calls but this is more work.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Traditional DAQ on LV2009?

Hi,
after doing an installation of LV2009 and it's DeviceDrivers I missed the traditional DAQ functions... Even trying to re-install (or update) the traditionalDAQ didn't work.
So:
Is TradDAQ support dropped starting from LV2009? I couldn't find information on this in the upgrade notes...
Possible workaround:
Described here: Working in the opposite direction as described I copied the files from my LV8.6 to the LV2009 folder...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Solved!
Go to Solution.

Hi Patrick,
thanks for the link. It gives the same information as the link in my question, but focused on error description...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to simutaneously use 2 PCI cards, one with traditional DAQ, the other with DAQmx?

Hi,
I am currently trying to debug a system that used to work.. but sadly isnt anymore
A single computer contains 2 PCI cards (6110 & 6036E). The 6110 card is controlled by a fairly old software, programmed in labview, and hence, using Traditional NI-DAQ. The 6036e card is controlled by a more recent soft, programmed in LV as well but using DAQmx.
the AI/AO of the 6110 card is only momentarily used (20 sec consecutively, every minute) while the 6036E card is continuously receiving and sending data on its AI/AO.
Now the problem: the program that control the 6036E card freezes every time that the old prog access the 6110 card.. and then it works again perfectly until the next time that the 6110 card is used.
So my question: how can I make those 2 cards work simultaneously?
I dont think that it is because of the software nor because of the computer lack of memory/CPU if it used to work in the past. It might be about a wrong configuration of cards in the MAX but I couldnt find anything wrong there (no problem when accessing AI/AO of both cards through "test panel")
Thank you very much for you help.

That's what bugs me. The only thing that those 2 cards share is an AO of the 6110 connected to an AI of the 6036.
For the rest, nothing is common. The 1st program only deal with device1, while the 2nd prog only access dev2. There shouldnt be any problem and everything is working fine separately. Hence, why I was wondering if the traditional daq and daqmx might conflict on a same computer.
I just cant find out why the 2nd program controling the daqmx card just freeze everytime the 1st program access the traditional card. It actually doesnt freeze completly but becomes soooo slow, with about only 2 iterations of the main while loop during those 15-20 sec (instead of the normal 3-4000 iterations during such a period).
The computer specs are a 2.2ghz proc for 1G of ram and running XP, so it should be ok.. even though the computer does slow a bit down when the 1st prog access the traditional card.

Traditional DAQ and SCXI 1530 model name

Hi all,
I am using Labview 6.1 and Traditional DAQ 7.1. I am working on one system with one DAQ card (PCI 6052E) and several SCXI cards(1520, 1530). All the SCXI cards are installed correctly because MAX can detect them all.
I want to make a program with Traditional DAQ which can detect all the SCXI cards and show their model names on the front panel.
I found in Tradtional DAQ, there is one VI called "Get SCXI Information" which returns the model types of SCXI cards, something like, 50, 51....
I found in the help file of "Get SCXI Information" VI there is some kind of the configuration file saying 51 stands for SCXI 1520. What does 50 stand for? Where can I find the complete configuration file or somehow can I change it? Like make 51 stands for something else...
Any ideas are highly appreciated.... Thank you all!
Solved!
Go to Solution.

This is a duplicate of the last post in this thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=53087
Brad Keryan
NI R&D

Shows as installed, but it's not

Muse and Lightroom show as installed. But they, in fact, are not.
This likely stems from the way I initially set things up. I was using my traditional licensed software but have now signed up with the cloud account. Muse and LR installed but everything had to be uninstalled due to constant crashing. So I took everything off, thought I scurbbed my machine clean of all things adobe.
Now on reinstall, these two programs show as being installed but they are not. Other programs are installing fine and working well.
Thanks for help in clearing this up.
By the way, I'm on a Mac OS. 10.7.5 on a mid 2010 MBP
Brent Bergherm

Thank you. while this did not directly help the situation, I did stumble upon the solution.
In the Applications/utilities/adobe installers folder there were the "uninstallers" for each application that is recognized by the application manager. I ran these uninstallers and it worked, even though for Lightroom it showed only having about 4KB of information to delete. Regardless, it cleared the problem and all is now stable.
Brent

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Tradition DAQ installed but unavailable

Similar Messages

Maybe you are looking for