Traditional Chinese input 注音(Zhuyin) gets stucked frequently in safari

Since I updated to Lion last night, the traditional Chinese input Zhuyin is not working in web page.
Even I switch to english and switch back, it still not working but English is okay!
At the same time the Google search bar at top right side of Safari does not have this issue.
It only happens in web page.
Snow Leapard does not have this issue too.

re-send pics
fail case
pass case

Similar Messages

Traditional Chinese Input

I know that it is possible because once upon a time, I had installed it somehow on my blackberry... but for the life of me I can't remember how. How does one get the Traditional Chinese Input capability on the BB 8310?
Message Edited by lwang124 on 12-18-2008 05:57 PM

You need upgrade the software to multilingual that includes Chinese Input.
Check with your carrier to know the BlackBerry device OS release or click on this link. Look for the multilingual OS version. Download and install using desktop manager.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

6288 Traditional Chinese input?

Does anyone know if I can get Traditional Chinese input for my 6288?
Currently my 6288 only has the following input languages: English, Simplified Chinese and Malayu. However, I really need Traditional Chinese input. Is there any way I can get it on my phone?
Pls help me in this. Thank you.

The only way to do that is to take the phone to a Nokia Service Center and ask them to load firmware onto the phone that supports Traditional Chinese input.
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

IDOC RSRQST is getting stuck frequently, it leads to delay in data loading

hi,
we are using SAP R/3 4.7 E and SAP Netweaver 2004s as BI server .
On daily basis we are loading the data from R/3 to BI system . we are facing problems in data loading
IDOC RSRQST is getting stuck frequently, which leads to delay in data loading..
Please guide me to resolve this issue .
Thanks in advance .

Thanks for your reply kumarsen . I have gone through the referred forum .
In my case , I have checked the TRFC, conncetivity between R/3 and BW and Job scheduled as priority C .
Still many Idocs are got stuck in R/3 [approx every 5 min once] . we are releasing the Idoc's through BD87 only .
Please suggest for some permanent solution .

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

System gets stuck frequently

My macbook( Late 2010 model) gets stuck frequently. This started happenning after I ve downloaded some apps from the Mac App Store. I ve found some errors running Verify Disk Permissions in Disk Utility. It says "Some errors cannot be repaired".

When you are using an overclocked bus, sata 1 & 2 don't get locked properly, so their frequencies increase as well. This will cause problems with attached devices. 3 & 4 have a functioning lock and this is not a problem. I'm not sure about the safely remove hardware icon, try looking at the properties of the disk under device manager and see if theres a setting or something.
Has the problem gone now you have moved the drive?

I need Traditional Chinese Input!!!!!!

Dear Apple Team,
I don't mind about multi-tasking, chinese interface, wall paper, home screen folder etc....
But I do want Traditional Chinese Input!
Just got my iPad days ago in HK, everything is fine and smooth, except i cannot type or write traditional Chinese, and no way i can do now....
A decision i could not understand at all.....

A decision i could not understand at all…..
The language input capabilities of the iPad have been published by Apple in its tech specs since Jan. 27, so that potential customers could be aware of any limitations in that area which might affect them.
http://www.apple.com/ipad/specs/

No Traditional Chinese Input!!!!

It's an outrage only Simplified Chinese input method is supported. The majority of the US Chinese population, not to mention a very large world population use Traditional Chinese.
Traditional Chinese input methods are already on iPhones and iPod Touch, why doesn't Apple port it to iPad?
Make your opinion known and post followup so Apple will pay attention!

Being able to "read and write both" does not mean the ability to understand it. I'm sure you can "read and write" English, but I'm sure that not everyone in the US knows what "going to the loo" means; hence the cultural difference between the 2 speakers.
I can read and write both Traditional and Simplified Chinese, and I've played with the Simplified Chinese on my iPad, being a Traditional Chinese writer, "bee-hive digital" does not mean "Cellular Data" to me in any way shape or form.
Logically, the interface to input would be the same for the iphone and the ipad, where as the iphone does suppose Traditional Chinese. I just don't understand it was left out.

I need the Traditional Chinese Input!

Apple Team, Please hurry to add Traditional Chinese Input for ipad! Thanks!

If you want to make a recommendation to Apple go here. Apple does not really monitor these peer-help forums.
http://www.apple.com/feedback/ipad.html
This discussion gives a workaround.
http://discussions.apple.com/thread.jspa?messageID=12027604&#12027604

After updating to iOS 8 the iPad Air is getting crashed frequently including safari

After updating to iOS 8 the iPad Air is getting crashed frequently including safari.

Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.
You may need to restore your iPad. That's where you back it up, then restore it to factory defaults, then put your backup back on so you don't lose any data. Sometimes a fresh start clears out any glitches and can help.

Changing Chinese input then Mac Stuck

As the title,I upgrade my Mac from 10.6.8 to 10.7. W
hen I want to change the input method from US/Canada French... to Traditional Chinese - Zuyin,
then my Mac stuck, and no response until restart it forcely.
I google how to resolve it, some users said ' I just put it a while let the ball spinning around, then my Mac OK!',
But mine isn't useful!
Is there any function to make it works? Or I need waiting Apple release hotfixes

I have the same problem. On my iMac it works fine, but on the MacBook Pro, the whole OS X Lion crashes/freezes..
I hope there is a fix soon.

SQL developer get stuck frequently

Hi
I am experiencing a major problems with SQL Developer.
The program seems to hang very frequently and sometimes requires me to kill the process and restart it.
Sometimes it occur even when I am in the process of writing a query(Usually then it will hang for shorter periods of a few seconds)
Other times it occur when I run long queries, and then the program might get stuck completely and I am forced to kill the process.
I am currently using sql developer 1.5.5 with JDK 1.6.0.13
Though I installed before 1.5.4 with built in JDK and suffered the same results.
I use Windows XP with service pack 2.
Thanks
Ron
Edited by: user3332125 on Aug 25, 2009 4:51 AM

How much physical RAM to you have?
Do you have anti-virus software running?
Some versions of JDK6 are problematic. try upgrading to the latest.
Some of these hangs are due to SQLDeveloper being swapped out of memory and should eventually go away.
If you start sqldeveloper from <sqldev>\sqldeveloper\bin\sqldeveloper.exe you will get a java console window. When SQLdeveloper hangs, click on the console window and press ctrl-break. That will give you a thread dump which you can post here and the development team may be able to diagnose the cause of the hang (if it is a hang and not just a slow down)
You may also see other error messages in the java console.

Traditional Chinese input method

I would like to suggest more Chinese input methods should be added in the iPhone 3G.
FOr example, Traditional Chinese 'Jianyi' - 'Simplex', this is more convenient to use than 'pinyin'.
I hope that this will be covered in the new update.

how do you change to chinese input method?
See page 27-28 of the iphone user guide.
http://manuals.info.apple.com/en/iPhoneUserGuide.pdf

Traditional Chinese Input Method -- Combine characters?

I use OS X's IM to type Chinese characters alot and recently stumbled into an ancient word (was doing some classical literature stuff) which I couldn't find it anywhere using Pinyin or the Character Palette. This word can be made up from two singular word, one on each side. Now my question is, does anyone know a way to 'create' such word or 'combine' two Chinese words to form one single word?
Hope there're some brighter light out here.

I use OS X's IM to type Chinese characters alot and recently stumbled into an ancient word (was doing some classical literature stuff) which I couldn't find it anywhere using Pinyin or the Character Palette. This word can be made up from two singular word, one on each side. Now my question is, does anyone know a way to 'create' such word or 'combine' two Chinese words to form one single word?
There is no way to create Chinese characters which have not been encoded. But the chances are good that it is already available -- you may just need to install a font which covers the CJK Extension B. If you could provide the the unicode values of the two components, I can try to find it in tables I have.

NOKIA N97 GETTING STUCK FREQUENTLY

HI Friends,
Well its been just a couple of weeks i got N97 , within this time the phone got stuck more than 5 times i have even upgraded its OS to version 11.0, the problem that occurs mostly is that the slider to unlock the screen doesn't work and ultimately have to remove the battery and then start again to resolve it but i am afraid this will effect the OS.
So please guys help me out to resolve this bug.
Thanks in advance.

I don't know lots of things about n97, but you could try a soft reset. *#7370#, 12345 (default code).It will delete all your phone data, only.
If you want to thank someone, just click on the blue star at the bottom of their post

Traditional Chinese input 注音(Zhuyin) gets stucked frequently in safari

Similar Messages

Maybe you are looking for