Traffic allow

We have 2 firewalls, one is of Cisco and second is of Sonicwall.
There is a site to site VPN between both the firewall. There is one Remote Access VPN on Sonicwall to one client.
There is one server placed internally to Cisco firewall.
Now we want that the client can access that server.
So what configuration we have to do on Sonicwall so that the client will be able to access that server through VPN?
Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

Perhaps this question would best be asked in the Sonicwall support forums?
https://support.software.dell.com/product-support-forums
What would be needed on the Cisco side is that the IP of the client connecting to the Sonicwall VPN would need to be added as a destination IP in the crypto ACL on the ASA.
Please remember to select a correct answer and rate helpful posts

Similar Messages

ACL Applied in Inbound direction and another ACL exist for in outbound direction - will return traffic allow

interface gix/y
ip address A.B.C.D 255.255.255.192
ip access-group ACL-Inbound in
ip access-group ACL-Outbound out
exit
In ACL-Inbound I have allowed SMTP traffic 6 source address to 4 destination server. One sample output among 24 acl is given below.
permit tcp host E.F.G.H host I.J.K.L eq 25
I haven't applied any specific rule for SMTP traffic on outbound direction. My understanding is destinations will be able to reply to the request. Does that need to be specified in the ACL

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As Fahad has already noted, if you're going to use both an in and out ACL, you'll need to account for the traffic allowed in both direction. Normally, the in and out ACE are just mirror entries, so for your example of:
in
permit tcp host E.F.G.H host I.J.K.L eq 25
out would be:
permit tcp host I.J.K.L eq 25 host E.F.G.H
Fahad also mentioned using a Reflexive ACL. These will generate a stateful mirror ACE for the reverse traffic. The reverse ACE will stay active for a short duration after seeing traffic that creates it and the it will time out and remove itself. Normally you would only use one on a trusted side of the device for generated flows. When used with a trusted side, the ACE often are made more generic, for example, any inside to outside HTTP flow will allow and ACE for the return traffic.

'Only' NAT'd Traffic Allowed Between ASA Interfaces

I've just setup (2) ASAs. In doing so, I've run into the same problem on each one (i.e., I must configure NAT on each interface for the traffic to flow between them)
Accordingly to my literature and videos I've been through, I should not have to perform NAT for the traffic to move between the different interfaces.
Questions:
What have I done wrong?
What do I need to do to have this run as I expected it would (*without NAT)? While it appears harmless to have it setup this way, it just doesn't look 'clean' to me.
Notes about my configurations:
Same security level traffic is permitted
All interfaces have their security levels set to 100
I've reset the ACLs to allow all traffic as well (*this is a lab)
All tcp-udp traffic is inspected by default on ASAs
Many thanks.
Fred

NAT-Control: NA, deprecated.
Without Nat-Control: As I mentioned previously, I must use NAT, or the traffic will not flow between interfaces. This is my problem. It doesn't make sense that I should need to use NAT for traffic to flow between the different interfaces.
Notes about my configurations:
Same security level traffic is permitted
All interfaces have their security levels set to 100
I've reset the ACLs to allow all traffic as well (*this is a lab)
All tcp-udp traffic is inspected by default on ASAs
Questions:
What have I done wrong?
What do I need to do to have this run as I expected it would (*without NAT)? While it appears harmless to have it setup this way, it just doesn't look 'clean' to me.

RV-082 Router Incoming traffic allow

We are using Cisco Router RV-082
We want to allow incoming traffic ONLY to our remote office on specific port. Is it possible to configure our router to allow only traffic from specific IP address?
Please help me
Thanks in advance!

Hello,
To accomplish what you are trying to do, you will need to create two inbound rules. One denying all traffic from all sources and another one allowing all traffic from the WAN port with the source IP as the IP you want to allow.
Here is a document explaining how to create the access rules.
http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=214b9e138807474cba39cda82212f509_Adding_Deleting_an_IPv4_access_Rule.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search
I hope this helps.

Unauthenticated traffic allowed into corporate network by Reverse Proxy

The mobility solution for Lync 2013 requires unauthenticated traffic to be passed into the corporate network, where it is then authenticated by Lync web services. So how do I convince my "security guys" that allowing this unauthenticated
traffic through a reverse proxy is safe?

You can say the Microsoft Lync and Exchange 2013 were designed with security in mind and so on and so forth, and it's true. The security risk is slim, and there are much easier attack vectors to target. But you're right, the Lync 2013 client
does not support pre-authentication and users connecting to the Lync Web App anonymously require no authentication. I don't think you'll be able to convince them if they just don't like the idea of sending traffic to Internal servers unauthenticated.
In the end, someone will have to make a business decision, do you want to enable this functionality or not?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to create a Access list on core switch to bloxk all Internet Traffic & allow some specific Internet Traffic

Hellp Everyone,
I am trying to create a Access-List on my Core Switch, in which I want to allow few internet website & block the rest of them.
I want to allow the whole Intranet but few intranet websites also needs access to the internet.
Can we create such Access-List with the above requirement.
I tried to create the ACL on the switch but it blocks the whole internet access.
i want to do it for a subnet not for a specific IP.
Can someone help me in creating such access list.
Thanks in Advance

The exact syntax depends on your subnets and how they connect to the Internet. If you can share a simple diagram that would be much more informative.
In general just remember that access-lists are parsed from the top down and as soon as a match is found, the processing stops. So you put the most specific rules at the top. also, once you add an access-list, there is an implicit "deny any any" at the end.
The best approach is to create some network object-groups and then refer to them in your access list. From your description, that would be something like three object-groups - one for the Intranet (Intranet), one for the allowed servers that can use Internet (allowed_servers), and a third for the permitted Internet sites (allowed_sites).
You would then use them as follows:
ip access-list extended main_acl
permit any object-group intranet any
permit object-group allowed_servers object-group allowed_sites any
interface vlan
ip access-group main_acl in
More details on the syntax and examples can be found here:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/15-2mt/sec-object-group-acl.html#GUID-BE5C124C-CCE0-423A-B147-96C33FA18C66

WSA blocking HTTPS traffic -allowing HTTP

We have two S170 WSA appliances configured as Guest Wi-Fi Internet proxy servers. The local network design is as follows:
WLC5508 (Foreign) >> WLC5508 (Anchor) >> ACE20 Context >> WSA 170 >> FWSM >> Internet
Guest traffic is authenticated via WCS using RADIUS but is disabled for now.
Clients associate to SSID, receive IP address via local DHCP scope on anchor WLC and forward all traffic to DFWG which is ACE20 interface.
ACE20 has specific class-maps for public DNS use and loadbalance policy-map which forwards all other traffic (excluding DNS) to WSA.
HTTP traffic works fine, HTTPS traffic fails. The HTTPS proxy service uses a local self-signed certificate for initial decryption of the session. The browser and WSA negotiates to use TLSv1 then the error below is shown.
Fails
57666018.658 32 192.168.244.1 NONE_SSL/200 0 TCP_CONNECT 10.153.9.6:443 - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - s-ip= 255.255.255.255 s-port= 443 webcat-code= - cs-version= 0 cs-auth-group= - c-port= 54930 cs-bytes= 0 wbrs-score= - wbrs-threat-reason= - wbrs-threat-type= - cs-user-agent= - cs-referer= - cs-cookie= -
1357666018.760 32 192.168.244.1 NONE_SSL/200 0 TCP_CONNECT 10.153.9.6:443 - NONE/- - OTHER-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - s-ip= 255.255.255.255 s-port= 443 webcat-code= - cs-version= 0 cs-auth-group= - c-port= 54931 cs-bytes= 0 wbrs-score= - wbrs-threat-reason= - wbrs-threat-type= - cs-user-agent= - cs-referer= - cs-cookie= -
1357666018.799 0 192.168.244.1 TCP_DENIED_SSL/403 0 GET https://post.packetconsulting.com:443/owa - NONE/- - BLOCK_ADMIN-HTTPS-NonLocalDestination-NONE-NONE-NONE-NONE-NONE-NONE <-,-,-,"-",-,-,-,-,"-",-,-,-,"-",-,-,"-","-",-,-,-,-,"-","-","-","-","-","-",0.00,0,-,"-","-"> - s-ip= 255.255.255.255 s-port= 443 webcat-code= - cs-version= 1 cs-auth-group= - c-port= 54931 cs-bytes= 598 wbrs-score= - wbrs-threat-reason= - wbrs-threat-type= - cs-user-agent= "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB7.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 1.1.4322; InfoPath.2; Tablet PC 2.0; MS-RTC LM 8)" cs-referer= - cs-cookie= -
I have seen this error posted before but no resolution. I'm sure this is a config problem, but cannot figure why or where!
Any ideas, thoughts or help would be great...
Cheers

Hi axa,
This is an access policy blocking the SSL traffic based on the TCP_DENIED_SSL / 403. Also I would suspect that you do not have HTTPS proxy enabled which would be required since your not using port 80 for 443 traffic. I would recommend opening a ticket with the WSA Content Security Team.
Sincerely,
Erik Kaiser
WSA CSE
WSA Cisco Forums Moderator
Message was edited by: Erik Kaiser

2960 Allow only PPPoE on port

Hi all,
is there any way to allowe only PPPoE comunication on ethernet port on 2960X or 2960S catalyst switches?
Thanx
BR
David

Hi Reza,
I think David's question focused on something else: can you configure an access port on a switch so that the only frame it accepts is a PPPoE frame?
In my opinion, that should be possible - the easiest way of doing that would simply be to configure a port-ACL (PACL) that drops all IP traffic whatsoever. PPPoE-encapsulated packets are not treated as IP packets by the switch, so IP PACL will not apply. So simply doing something like this should do the trick:
ip access-list standard NoIP deny any!interface FastEthernet0/1 ip access-group NoIP in
If we wanted to be very precise, we could also create a MAC ACL to further narrow down the non-IP traffic allowed through a port. PPPoE uses EtherType values 0x8863 and 0x8864. The MAC ACL would need to be carefully specified, though, to allow other Layer2 control and management plane traffic (STP, DTP, VTP, CDP, LLDP, PAgP/LACP, UDLD, LOOP...), so it could be more difficult to create properly.
I even believe that creating a VACL would be possible although the VACLs are not officially supported on 2960 Catalysts yet (still, with a very recent IOS, they can be created and used just fine).
Best regards,
Peter

ConsoleKit takes 20seconds to time out on GDM load

My GDM is really slow and Please take a look at my messages.log Search for ConsoleKit to see Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ Feb 1 20:31:48 localhost kernel: [ I tracked it down to ConsoleKit. Anyone have any suggestion on how to fix it?
to get some idea of what's happening:
that it's taking 20secs to timeout.
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 26 08:40:20 CET 2012
0.000000] Command line: root=/dev/sda2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
0.000000] BIOS-provided physical RAM map:
0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
0.000000] BIOS-e820: 0000000000100000 - 00000000cd71e000 (usable)
0.000000] BIOS-e820: 00000000cd71e000 - 00000000cd772000 (ACPI NVS)
0.000000] BIOS-e820: 00000000cd772000 - 00000000cd77b000 (ACPI data)
0.000000] BIOS-e820: 00000000cd77b000 - 00000000cdada000 (reserved)
0.000000] BIOS-e820: 00000000cdada000 - 00000000cdaeb000 (ACPI NVS)
0.000000] BIOS-e820: 00000000cdaeb000 - 00000000cdafe000 (reserved)
0.000000] BIOS-e820: 00000000cdafe000 - 00000000cdb00000 (ACPI NVS)
0.000000] BIOS-e820: 00000000cdb00000 - 00000000cdb09000 (reserved)
0.000000] BIOS-e820: 00000000cdb09000 - 00000000cdb0f000 (ACPI NVS)
0.000000] BIOS-e820: 00000000cdb0f000 - 00000000cdb71000 (reserved)
0.000000] BIOS-e820: 00000000cdb71000 - 00000000cdd74000 (ACPI NVS)
0.000000] BIOS-e820: 00000000cdd74000 - 00000000cdf00000 (usable)
0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
0.000000] BIOS-e820: 0000000100001000 - 000000022f000000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI 2.7 present.
0.000000] No AGP bridge found
0.000000] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] last_pfn = 0xcdf00 max_arch_pfn = 0x400000000
0.000000] Using GB pages for direct mapping
0.000000] init_memory_mapping: 0000000000000000-00000000cdf00000
0.000000] init_memory_mapping: 0000000100000000-000000022f000000
0.000000] RAMDISK: 7fd5a000 - 7ffff000
0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
0.000000] ACPI: XSDT 00000000cd772068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: FACP 00000000cd779340 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
0.000000] ACPI: DSDT 00000000cd772150 071EC (v02 ALASKA A M I 00000000 INTL 20051117)
0.000000] ACPI: FACS 00000000cdb09f80 00040
0.000000] ACPI: APIC 00000000cd779438 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
0.000000] ACPI: MCFG 00000000cd7794d8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
0.000000] ACPI: HPET 00000000cd779518 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
0.000000] ACPI: IVRS 00000000cd779550 000D8 (v01 AMD RD890S 00202031 AMD 00000000)
0.000000] ACPI: SSDT 00000000cd779628 00D3C (v01 AMD POWERNOW 00000001 AMD 00000001)
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-000000022f000000
0.000000] Initmem setup node 0 0000000000000000-000000022f000000
0.000000] NODE_DATA [000000022effb000 - 000000022effffff]
0.000000] Zone PFN ranges:
0.000000] DMA 0x00000010 -> 0x00001000
0.000000] DMA32 0x00001000 -> 0x00100000
0.000000] Normal 0x00100000 -> 0x0022f000
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[4] active PFN ranges
0.000000] 0: 0x00000010 -> 0x0000009d
0.000000] 0: 0x00000100 -> 0x000cd71e
0.000000] 0: 0x000cdd74 -> 0x000cdf00
0.000000] 0: 0x00100001 -> 0x0022f000
0.000000] ACPI: PM-Timer IO Port: 0x808
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
0.000000] PM: Registered nosave memory: 00000000cd71e000 - 00000000cd772000
0.000000] PM: Registered nosave memory: 00000000cd772000 - 00000000cd77b000
0.000000] PM: Registered nosave memory: 00000000cd77b000 - 00000000cdada000
0.000000] PM: Registered nosave memory: 00000000cdada000 - 00000000cdaeb000
0.000000] PM: Registered nosave memory: 00000000cdaeb000 - 00000000cdafe000
0.000000] PM: Registered nosave memory: 00000000cdafe000 - 00000000cdb00000
0.000000] PM: Registered nosave memory: 00000000cdb00000 - 00000000cdb09000
0.000000] PM: Registered nosave memory: 00000000cdb09000 - 00000000cdb0f000
0.000000] PM: Registered nosave memory: 00000000cdb0f000 - 00000000cdb71000
0.000000] PM: Registered nosave memory: 00000000cdb71000 - 00000000cdd74000
0.000000] PM: Registered nosave memory: 00000000cdf00000 - 00000000f8000000
0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000
0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000
0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000
0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
0.000000] Allocating PCI resources starting at cdf00000 (gap: cdf00000:2a100000)
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s82048 r8192 d24448 u262144
0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2047089
0.000000] Policy zone: Normal
0.000000] Kernel command line: root=/dev/sda2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Node 0: aperture @ f8000000 size 64 MB
0.000000] Memory: 8119580k/9158656k available (4281k kernel code, 827176k absent, 211900k reserved, 4599k data, 728k init)
0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
0.000000] Preemptible hierarchical RCU implementation.
0.000000] Verbose stalled-CPUs detection is disabled.
0.000000] NR_IRQS:4352 nr_irqs:1288 16
0.000000] Extended CMOS year: 2000
0.000000] Console: colour VGA+ 80x25
0.000000] console [tty0] enabled
0.000000] allocated 67108864 bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] Fast TSC calibration using PIT
0.000000] Detected 3110.742 MHz processor.
0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6223.71 BogoMIPS (lpj=10369140)
0.003339] pid_max: default: 32768 minimum: 301
0.003361] Security Framework initialized
0.003365] AppArmor: AppArmor disabled by boot time parameter
0.004126] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
0.007900] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
0.008745] Mount-cache hash table entries: 256
0.008854] Initializing cgroup subsys cpuacct
0.008859] Initializing cgroup subsys memory
0.008866] Initializing cgroup subsys devices
0.008868] Initializing cgroup subsys freezer
0.008869] Initializing cgroup subsys net_cls
0.008870] Initializing cgroup subsys blkio
0.008896] CPU: Physical Processor ID: 0
0.008897] CPU: Processor Core ID: 0
0.008899] mce: CPU supports 7 MCE banks
0.009566] ACPI: Core revision 20110623
0.013346] ftrace: allocating 16779 entries in 66 pages
0.020327] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.053341] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
0.056663] Performance Events: AMD Family 15h PMU driver.
0.056663] ... version: 0
0.056663] ... bit width: 48
0.056663] ... generic registers: 6
0.056663] ... value mask: 0000ffffffffffff
0.056663] ... max period: 00007fffffffffff
0.056663] ... fixed-purpose events: 0
0.056663] ... event mask: 000000000000003f
0.073374] NMI watchdog enabled, takes one hw-pmu counter.
0.100015] Booting Node 0, Processors #1
0.196673] NMI watchdog enabled, takes one hw-pmu counter.
0.216689] #2
0.313331] NMI watchdog enabled, takes one hw-pmu counter.
0.333338] #3
0.429988] NMI watchdog enabled, takes one hw-pmu counter.
0.449998] #4
0.546652] NMI watchdog enabled, takes one hw-pmu counter.
0.566662] #5
0.663312] NMI watchdog enabled, takes one hw-pmu counter.
0.683316] #6
0.779965] NMI watchdog enabled, takes one hw-pmu counter.
0.799971] #7 Ok.
0.896625] NMI watchdog enabled, takes one hw-pmu counter.
0.903288] Brought up 8 CPUs
0.903291] Total of 8 processors activated (49786.82 BogoMIPS).
0.906788] devtmpfs: initialized
0.908166] PM: Registering ACPI NVS region at cd71e000 (344064 bytes)
0.908166] PM: Registering ACPI NVS region at cdada000 (69632 bytes)
0.908166] PM: Registering ACPI NVS region at cdafe000 (8192 bytes)
0.908166] PM: Registering ACPI NVS region at cdb09000 (24576 bytes)
0.908166] PM: Registering ACPI NVS region at cdb71000 (2109440 bytes)
0.910376] print_constraints: dummy:
0.910415] NET: Registered protocol family 16
0.910507] Extended Config Space enabled on 1 nodes
0.910549] ACPI: bus type pci registered
0.910607] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.910610] PCI: not using MMCONFIG
0.910612] PCI: Using configuration type 1 for base access
0.910613] PCI: Using configuration type 1 for extended access
0.911157] bio: create slab <bio-0> at 0
0.911157] ACPI: Added _OSI(Module Device)
0.911157] ACPI: Added _OSI(Processor Device)
0.911157] ACPI: Added _OSI(3.0 _SCP Extensions)
0.911157] ACPI: Added _OSI(Processor Aggregator Device)
0.913406] ACPI: Executed 2 blocks of module-level executable AML code
0.923431] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
0.923438] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349)
0.923740] ACPI: Interpreter enabled
0.923743] ACPI: (supports S0 S1 S3 S4 S5)
0.923766] ACPI: Using IOAPIC for interrupt routing
0.923907] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
0.923945] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
0.972366] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
0.972499] ACPI: No dock devices found.
0.972500] HEST: Table not found.
0.972503] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.972680] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.972959] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
0.972962] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
0.972964] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
0.972966] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
0.972968] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
0.972970] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
0.972972] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
0.974557] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
0.974564] pci 0000:00:02.0: PCI bridge to [bus 01-01]
0.979960] pci 0000:00:04.0: PCI bridge to [bus 02-02]
0.986619] pci 0000:00:05.0: PCI bridge to [bus 03-03]
0.993283] pci 0000:00:06.0: PCI bridge to [bus 04-04]
0.999948] pci 0000:00:07.0: PCI bridge to [bus 05-05]
1.006616] pci 0000:00:09.0: PCI bridge to [bus 06-06]
1.006676] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
1.007075] pci0000:00: Requesting ACPI _OSC control (0x1d)
1.007078] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
1.007080] ACPI _OSC control for PCIe not granted, disabling ASPM
1.013835] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
1.013895] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
1.013957] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
1.014018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
1.014066] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
1.014103] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
1.014141] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
1.014178] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
1.014248] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
1.014248] vgaarb: loaded
1.014248] vgaarb: bridge control possible 0000:01:00.0
1.014248] PCI: Using ACPI for IRQ routing
1.020997] NetLabel: Initializing
1.020999] NetLabel: domain hash size = 128
1.021000] NetLabel: protocols = UNLABELED CIPSOv4
1.021013] NetLabel: unlabeled traffic allowed by default
1.021026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
1.021030] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
1.023074] Switching to clocksource hpet
1.025725] pnp: PnP ACPI init
1.025737] ACPI: bus type pnp registered
1.026037] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
1.026620] system 00:02: [io 0x040b] has been reserved
1.026623] system 00:02: [io 0x04d6] has been reserved
1.026625] system 00:02: [io 0x0c00-0x0c01] has been reserved
1.026627] system 00:02: [io 0x0c14] has been reserved
1.026629] system 00:02: [io 0x0c50-0x0c51] has been reserved
1.026632] system 00:02: [io 0x0c52] has been reserved
1.026634] system 00:02: [io 0x0c6c] has been reserved
1.026636] system 00:02: [io 0x0c6f] has been reserved
1.026638] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
1.026640] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
1.026642] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
1.026644] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
1.026646] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
1.026649] system 00:02: [io 0x0800-0x089f] has been reserved
1.026651] system 00:02: [io 0x0b20-0x0b3f] has been reserved
1.026653] system 00:02: [io 0x0900-0x090f] has been reserved
1.026656] system 00:02: [io 0x0910-0x091f] has been reserved
1.026658] system 00:02: [io 0xfe00-0xfefe] has been reserved
1.026661] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
1.026664] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
1.026677] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
1.026680] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
1.026682] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
1.026685] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
1.026688] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
1.026854] system 00:03: [io 0x0290-0x02af] has been reserved
1.027074] system 00:07: [io 0x04d0-0x04d1] has been reserved
1.027343] system 00:0a: [mem 0xfeb20000-0xfeb23fff] has been reserved
1.027480] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
1.027648] pnp: PnP ACPI: found 13 devices
1.027650] ACPI: ACPI bus type pnp unregistered
1.034572] pci 0000:00:02.0: PCI bridge to [bus 01-01]
1.034575] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
1.034578] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf70fffff]
1.034581] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
1.034585] pci 0000:00:04.0: PCI bridge to [bus 02-02]
1.034587] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
1.034590] pci 0000:00:04.0: bridge window [mem 0xf7500000-0xf75fffff]
1.034594] pci 0000:00:05.0: PCI bridge to [bus 03-03]
1.034597] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
1.034599] pci 0000:00:05.0: bridge window [mem 0xf7400000-0xf74fffff]
1.034604] pci 0000:00:06.0: PCI bridge to [bus 04-04]
1.034606] pci 0000:00:06.0: bridge window [mem 0xf7300000-0xf73fffff]
1.034611] pci 0000:00:07.0: PCI bridge to [bus 05-05]
1.034613] pci 0000:00:07.0: bridge window [mem 0xf7200000-0xf72fffff]
1.034617] pci 0000:00:09.0: PCI bridge to [bus 06-06]
1.034620] pci 0000:00:09.0: bridge window [mem 0xf7100000-0xf71fffff]
1.034624] pci 0000:00:14.4: PCI bridge to [bus 07-07]
1.034641] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
1.034649] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
1.034656] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
1.034666] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
1.034673] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
1.034679] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
1.034759] NET: Registered protocol family 2
1.035011] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
1.036243] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
1.037985] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
1.038182] TCP: Hash tables configured (established 524288 bind 65536)
1.038184] TCP reno registered
1.038200] UDP hash table entries: 4096 (order: 5, 131072 bytes)
1.038241] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
1.038330] NET: Registered protocol family 1
2.103599] Unpacking initramfs...
2.145316] Freeing initrd memory: 2708k freed
2.145978] pci 0000:00:00.2: PCI INT A -> GSI 55 (level, low) -> IRQ 55
2.146104] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40
2.213957] AMD-Vi: Lazy IO/TLB flushing enabled
2.213960] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
2.213962] Placing 64MB software IO TLB between ffff8800c971e000 - ffff8800cd71e000
2.213965] software IO TLB at phys 0xc971e000 - 0xcd71e000
2.214583] perf: AMD IBS detected (0x000000ff)
2.214717] audit: initializing netlink socket (disabled)
2.214725] type=2000 audit(1328128291.213:1): initialized
2.226263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
2.249701] VFS: Disk quotas dquot_6.5.2
2.249754] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
2.249833] msgmni has been set to 15863
2.250009] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
2.250041] io scheduler noop registered
2.250042] io scheduler deadline registered
2.250071] io scheduler cfq registered (default)
2.250407] ERST: Table is not found!
2.250409] GHES: HEST is not enabled!
2.250463] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
2.463583] Linux agpgart interface v0.103
2.463656] i8042: PNP: No PS/2 controller found. Probing ports directly.
2.463999] serio: i8042 KBD port at 0x60,0x64 irq 1
2.464021] serio: i8042 AUX port at 0x60,0x64 irq 12
2.464164] mousedev: PS/2 mouse device common for all mice
2.464197] rtc_cmos 00:05: RTC can wake from S4
2.464319] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
2.464343] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
2.464357] cpuidle: using governor ladder
2.464359] cpuidle: using governor menu
2.464584] TCP cubic registered
2.464586] NET: Registered protocol family 17
2.464591] Registering the dns_resolver key type
2.464716] registered taskstats version 1
2.476065] rtc_cmos 00:05: setting system clock to 2012-02-01 20:31:32 UTC (1328128292)
2.476133] Initializing network drop monitor service
2.478077] Freeing unused kernel memory: 728k freed
2.478200] Write protecting the kernel read-only data: 8192k
2.486030] Freeing unused kernel memory: 1844k freed
2.489293] Freeing unused kernel memory: 692k freed
2.496933] udevd[63]: starting version 179
2.519274] SCSI subsystem initialized
2.522067] usbcore: registered new interface driver usbfs
2.522092] usbcore: registered new interface driver hub
2.522136] usbcore: registered new device driver usb
2.525268] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
2.525310] xhci_hcd 0000:04:00.0: xHCI Host Controller
2.525333] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
2.532052] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
2.532191] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
2.532195] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
2.534149] scsi0 : ahci
2.534430] scsi1 : ahci
2.534950] scsi2 : ahci
2.534973] xhci_hcd 0000:04:00.0: irq 51, io mem 0xf7300000
2.535368] scsi3 : ahci
2.535611] hub 1-0:1.0: USB hub found
2.535617] hub 1-0:1.0: 2 ports detected
2.535667] scsi4 : ahci
2.535735] xhci_hcd 0000:04:00.0: xHCI Host Controller
2.535743] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
2.535809] scsi5 : ahci
2.535956] hub 2-0:1.0: USB hub found
2.535963] hub 2-0:1.0: 2 ports detected
2.536253] ata1: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b100 irq 19
2.536257] ata2: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b180 irq 19
2.536260] ata3: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b200 irq 19
2.536263] ata4: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b280 irq 19
2.536266] ata5: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b300 irq 19
2.536269] ata6: SATA max UDMA/133 abar m1024@0xf760b000 port 0xf760b380 irq 19
2.536304] ahci 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
2.536361] ahci: SSS flag set, parallel bus scan disabled
2.536390] ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
2.536393] ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
2.537576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
2.537596] scsi6 : ahci
2.537620] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
2.537653] ehci_hcd 0000:00:12.2: EHCI Host Controller
2.537672] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
2.537681] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
2.537719] ehci_hcd 0000:00:12.2: debug port 1
2.537734] scsi7 : ahci
2.537740] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7609000
2.537799] ata7: SATA max UDMA/133 abar m512@0xf7500000 port 0xf7500100 irq 81
2.537803] ata8: SATA max UDMA/133 abar m512@0xf7500000 port 0xf7500180 irq 81
2.550064] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
2.550194] hub 3-0:1.0: USB hub found
2.550198] hub 3-0:1.0: 5 ports detected
2.550282] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
2.550313] ehci_hcd 0000:00:13.2: EHCI Host Controller
2.550320] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
2.550326] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
2.550345] ehci_hcd 0000:00:13.2: debug port 1
2.550362] ehci_hcd 0000:00:13.2: irq 21, io mem 0xf7607000
2.553402] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
2.553438] xhci_hcd 0000:05:00.0: xHCI Host Controller
2.553447] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
2.555089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
2.560049] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
2.560188] hub 4-0:1.0: USB hub found
2.560191] hub 4-0:1.0: 5 ports detected
2.560280] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
2.560314] ehci_hcd 0000:00:16.2: EHCI Host Controller
2.560321] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 6
2.560329] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
2.560349] ehci_hcd 0000:00:16.2: debug port 1
2.560367] ehci_hcd 0000:00:16.2: irq 23, io mem 0xf7604000
2.563065] xhci_hcd 0000:05:00.0: irq 50, io mem 0xf7200000
2.563367] hub 5-0:1.0: USB hub found
2.563373] hub 5-0:1.0: 2 ports detected
2.563437] xhci_hcd 0000:05:00.0: xHCI Host Controller
2.563443] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 7
2.563617] hub 7-0:1.0: USB hub found
2.563625] hub 7-0:1.0: 2 ports detected
2.573392] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
2.573722] hub 6-0:1.0: USB hub found
2.573728] hub 6-0:1.0: 4 ports detected
2.574021] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
2.574050] ohci_hcd 0000:00:12.0: OHCI Host Controller
2.574059] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 8
2.574083] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf760a000
2.580067] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
2.580106] xhci_hcd 0000:06:00.0: xHCI Host Controller
2.580121] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
2.589735] xhci_hcd 0000:06:00.0: irq 48, io mem 0xf7100000
2.590047] hub 9-0:1.0: USB hub found
2.590052] hub 9-0:1.0: 2 ports detected
2.590111] xhci_hcd 0000:06:00.0: xHCI Host Controller
2.590116] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
2.590227] hub 10-0:1.0: USB hub found
2.590232] hub 10-0:1.0: 2 ports detected
2.634184] hub 8-0:1.0: USB hub found
2.634190] hub 8-0:1.0: 5 ports detected
2.634310] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
2.634324] ohci_hcd 0000:00:13.0: OHCI Host Controller
2.634331] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 11
2.634353] ohci_hcd 0000:00:13.0: irq 20, io mem 0xf7608000
2.690863] hub 11-0:1.0: USB hub found
2.690869] hub 11-0:1.0: 5 ports detected
2.690964] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
2.690977] ohci_hcd 0000:00:14.5: OHCI Host Controller
2.690984] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 12
2.691000] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7606000
2.747523] hub 12-0:1.0: USB hub found
2.747528] hub 12-0:1.0: 2 ports detected
2.747611] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
2.747623] ohci_hcd 0000:00:16.0: OHCI Host Controller
2.747631] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 13
2.747651] ohci_hcd 0000:00:16.0: irq 22, io mem 0xf7605000
2.804198] hub 13-0:1.0: USB hub found
2.804204] hub 13-0:1.0: 4 ports detected
2.846739] ata5: SATA link down (SStatus 0 SControl 300)
2.853415] ata6: SATA link down (SStatus 0 SControl 300)
2.853422] ata7: SATA link down (SStatus 0 SControl 300)
2.860071] usb 3-3: new high-speed USB device number 2 using ehci_hcd
3.013403] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
3.013934] ata2.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
3.014751] ata2.00: configured for UDMA/66
3.020037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
3.020063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
3.020360] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
3.020362] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
3.020690] ata1.00: configured for UDMA/133
3.020813] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
3.022190] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7170S 1.00 PQ: 0 ANSI: 5
3.074092] ata3.00: ATA-7: ST3500641AS, 3.AGE, max UDMA/133
3.074095] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
3.140722] ata3.00: configured for UDMA/133
3.140825] scsi 2:0:0:0: Direct-Access ATA ST3500641AS 3.AG PQ: 0 ANSI: 5
3.216724] Refined TSC clocksource calibration: 3110.408 MHz.
3.216733] Switching to clocksource tsc
3.263391] usb 4-3: new high-speed USB device number 2 using ehci_hcd
3.395804] hub 4-3:1.0: USB hub found
3.395894] hub 4-3:1.0: 3 ports detected
3.553384] usb 4-5: new high-speed USB device number 4 using ehci_hcd
4.046721] usb 11-4: new low-speed USB device number 2 using ohci_hcd
4.273663] usb 4-3.2: new low-speed USB device number 5 using ehci_hcd
4.420186] input: Western Digital My Book as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.1/input/input0
4.420237] generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:12.2-3/input1
4.426121] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:13.0/usb11/11-4/11-4:1.0/input/input1
4.426201] generic-usb 0003:045E:00D1.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:13.0-4/input0
4.426298] usbcore: registered new interface driver usbhid
4.426300] usbhid: USB HID core driver
4.430576] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3.2/4-3.2:1.0/input/input2
4.430693] apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:13.2-3.2/input0
4.433681] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:13.2/usb4/4-3/4-3.2/4-3.2:1.1/input/input3
4.433739] apple 0003:05AC:0221.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:13.2-3.2/input1
12.293392] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
12.309096] ata4.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
12.309099] ata4.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
12.312342] ata4.00: configured for UDMA/133
12.312441] scsi 3:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
12.630028] ata8: SATA link down (SStatus 0 SControl 300)
12.635871] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
12.635950] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
12.635957] sd 0:0:0:0: [sda] Write Protect is off
12.635976] sd 3:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB)
12.635985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
12.636034] sd 3:0:0:0: [sdc] Write Protect is off
12.636045] sd 2:0:0:0: [sdb] Write Protect is off
12.636066] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
12.636079] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
12.636749] sda: sda1 sda2 sda3 sda4
12.637439] sd 0:0:0:0: [sda] Attached SCSI disk
12.640917] sdc: sdc1
12.641165] sd 3:0:0:0: [sdc] Attached SCSI disk
12.651794] sdb: sdb1 sdb2
12.652085] sd 2:0:0:0: [sdb] Attached SCSI disk
12.655644] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
12.655648] cdrom: Uniform CD-ROM driver Revision: 3.20
13.048056] Btrfs loaded
13.048506] device fsid 699d671b-7064-441d-95ec-c616049fe287 devid 1 transid 3976 /dev/sda2
13.056208] Btrfs detected SSD devices, enabling SSD mode
13.490114] udevd[216]: starting version 180
13.539060] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
13.539066] ACPI: Power Button [PWRB]
13.539864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
13.539869] ACPI: Power Button [PWRF]
13.540851] wmi: Mapper loaded
13.558916] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
13.560394] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
13.560397] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
13.560422] e1000e 0000:03:00.0: Disabling ASPM L0s
13.560446] e1000e 0000:03:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
13.561584] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMRG [io 0xb00-0xb2f]
13.561588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
13.566248] [drm] Initialized drm 1.1.0 20060810
13.574620] input: PC Speaker as /devices/platform/pcspkr/input/input6
13.578148] EDAC MC: Ver: 2.1.0
13.580298] MCE: In-kernel MCE decoding enabled.
13.584054] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
13.585205] AMD64 EDAC driver v3.4.0
13.592440] MXM: GUID detected in BIOS
13.592532] nouveau 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
13.594790] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x450300a3)
13.599879] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
13.617652] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
13.618816] asus_wmi: ASUS WMI generic driver loaded
13.619138] hda_codec: ALC889: BIOS auto-probing.
13.620044] asus_wmi: Initialization: 0x0
13.620072] asus_wmi: BIOS WMI version: 0.9
13.620130] asus_wmi: SFUN value: 0x0
13.620447] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
13.622424] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
13.631444] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
13.631636] EDAC amd64: DRAM ECC disabled.
13.631648] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
13.631650] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
13.631651] (Note that use of the override may cause unknown side effects.)
13.663236] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 14:da:e9:13:96:a9
13.663239] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
13.663331] e1000e 0000:03:00.0: eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF
13.672185] [drm] nouveau 0000:01:00.0: ... appears to be valid
13.672188] [drm] nouveau 0000:01:00.0: BIT BIOS found
13.672190] [drm] nouveau 0000:01:00.0: Bios version 60.80.18.00
13.672193] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
13.672195] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
13.672197] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
13.672199] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00000030
13.672201] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
13.672203] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
13.672204] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c023
13.672207] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
13.672209] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
13.672211] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
13.672213] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
13.672214] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
13.672216] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
13.672220] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBFB4
13.694453] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC1BF
13.711299] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD37B
13.711307] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD46A
13.712376] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD621
13.712378] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD686
13.732383] [drm] nouveau 0000:01:00.0: 0xD686: Condition still not met after 20ms, skipping following opcodes
13.774080] adt7475 0-002e: ADT7473 device, revision 0
13.774082] adt7475 0-002e: Optional features: fan4
13.783928] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
13.783931] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
13.783935] [drm] nouveau 0000:01:00.0: 0: core 513MHz shader 1188MHz memory 792MHz voltage 1300mV fanspeed 100%
13.783950] [drm] nouveau 0000:01:00.0: c: core 198MHz shader 1188MHz memory 396MHz
13.785323] [TTM] Zone kernel: Available graphics memory: 4062776 kiB.
13.785325] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
13.785327] [TTM] Initializing pool allocator.
13.785341] [drm] nouveau 0000:01:00.0: Detected 320MiB VRAM
13.799226] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
13.806974] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
13.806977] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
13.817239] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
13.817241] [drm] No driver support for vblank timestamp query.
13.918245] usbcore: registered new interface driver uas
13.919398] Linux media interface: v0.10
13.921493] Initializing USB Mass Storage driver...
13.921642] scsi8 : usb-storage 3-3:1.0
13.922317] usbcore: registered new interface driver usb-storage
13.922320] USB Mass Storage support registered.
13.925326] Linux video capture interface: v2.00
13.927942] uvcvideo: Found UVC 1.00 device <unnamed> (046d:080f)
13.942174] input: UVC Camera (046d:080f) as /devices/pci0000:00/0000:00:13.2/usb4/4-5/4-5:1.0/input/input10
13.942248] usbcore: registered new interface driver uvcvideo
13.942251] USB Video Class driver (1.1.1)
13.976590] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x310000, bo ffff88021ea78000
13.976738] fbcon: nouveaufb (fb0) is primary device
14.021548] Console: switching to colour frame buffer device 210x65
14.025974] fb0: nouveaufb frame buffer device
14.025976] drm: registered panic notifier
14.025979] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
14.946307] scsi 8:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
14.969040] sd 8:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
14.982159] sd 8:0:0:0: [sdd] Write Protect is off
14.996032] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
15.619105] sdd: sdd1
15.730813] sd 8:0:0:0: [sdd] Attached SCSI disk
17.625282] device fsid 699d671b-7064-441d-95ec-c616049fe287 devid 1 transid 3976 /dev/sda2
17.625855] device label home devid 1 transid 8074 /dev/sda3
17.927687] btrfs: use ssd allocation scheme
17.930204] device label home devid 1 transid 8074 /dev/sda3
17.940362] Btrfs detected SSD devices, enabling SSD mode
17.976566] kjournald starting. Commit interval 5 seconds
17.976619] EXT3-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
17.976813] EXT3-fs (sdb2): using internal journal
17.976816] EXT3-fs (sdb2): mounted filesystem with ordered data mode
18.018513] kjournald starting. Commit interval 5 seconds

User,
Refer this
http://oracleintelligence.blogspot.com/2008/08/obiee-time-to-expire-for-idle.html
thanks,
Saichand.v

Catalyst 10.10 - Xorg 1.9.2 crash and random system freezes

Hello.
I have Radeon HD4650 AGP graphics card.
I have up to date(no testing repos) Archlinux.
I installed catalyst 10.10 from AUR - http://aur.archlinux.org/packages.php?ID=29111.
Everything is ok, but two problems:
1) When I switching TTY(eg. Ctrl-Alt-F6) while loading KDE(OpenGL splash is running) Xorg crashes:
kdm.log:
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH i686
Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/223249f9-5c17-4b09-9886-55ac67009986 ro elevator=deadline nomodeset vga=33556
Build Date: 01 November 2010 10:23:07PM
Current version of pixman: 0.18.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 8 10:37:11 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x80e5ebb]
1: /usr/bin/X (0x8048000+0x5cd65) [0x80a4d65]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb785240c]
3: /usr/bin/X (0x8048000+0x143986) [0x818b986]
4: /usr/bin/X (0x8048000+0x545c9) [0x809c5c9]
5: /usr/bin/X (0x8048000+0x16de3b) [0x81b5e3b]
6: /usr/bin/X (FreeCursor+0x57) [0x8062bd7]
7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0xb6979000+0x7b0b91) [0xb7129b91]
8: /usr/bin/X (0x8048000+0x14349a) [0x818b49a]
9: /usr/bin/X (miPointerUpdateSprite+0x2bd) [0x809d47d]
10: /usr/bin/X (0x8048000+0x556d3) [0x809d6d3]
11: /usr/bin/X (0x8048000+0xa34f6) [0x80eb4f6]
12: /usr/bin/X (0x8048000+0x16dcad) [0x81b5cad]
13: /usr/bin/X (0x8048000+0x2f31d) [0x807731d]
14: /usr/bin/X (ProcChangeActivePointerGrab+0x141) [0x807b901]
15: /usr/bin/X (0x8048000+0x27187) [0x806f187]
16: /usr/bin/X (0x8048000+0x1a1b5) [0x80621b5]
17: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7582c76]
18: /usr/bin/X (0x8048000+0x19d91) [0x8061d91]
Segmentation fault at address 0x21f000e6
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
kernel.log
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpuset
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpu
Nov 8 10:37:07 localhost kernel: Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010
Nov 8 10:37:07 localhost kernel: BIOS-provided physical RAM map:
Nov 8 10:37:07 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000bfff0000 - 00000000bfff8000 (ACPI data)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000bfff8000 - 00000000c0000000 (ACPI NVS)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:37:07 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Nov 8 10:37:07 localhost kernel: Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
Nov 8 10:37:07 localhost kernel: DMI 2.3 present.
Nov 8 10:37:07 localhost kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Nov 8 10:37:07 localhost kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Nov 8 10:37:07 localhost kernel: e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
Nov 8 10:37:07 localhost kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Nov 8 10:37:07 localhost kernel: last_pfn = 0xbfff0 max_arch_pfn = 0x100000
Nov 8 10:37:07 localhost kernel: MTRR default type: uncachable
Nov 8 10:37:07 localhost kernel: MTRR fixed ranges enabled:
Nov 8 10:37:07 localhost kernel: 00000-9FFFF write-back
Nov 8 10:37:07 localhost kernel: A0000-EFFFF uncachable
Nov 8 10:37:07 localhost kernel: F0000-FFFFF write-protect
Nov 8 10:37:07 localhost kernel: MTRR variable ranges enabled:
Nov 8 10:37:07 localhost kernel: 0 base 000000000 mask F80000000 write-back
Nov 8 10:37:07 localhost kernel: 1 base 080000000 mask FC0000000 write-back
Nov 8 10:37:07 localhost kernel: 2 disabled
Nov 8 10:37:07 localhost kernel: 3 disabled
Nov 8 10:37:07 localhost kernel: 4 disabled
Nov 8 10:37:07 localhost kernel: 5 base 0E0000000 mask FFC000000 write-combining
Nov 8 10:37:07 localhost kernel: 6 disabled
Nov 8 10:37:07 localhost kernel: 7 disabled
Nov 8 10:37:07 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 8 10:37:07 localhost kernel: Scanning 0 areas for low memory corruption
Nov 8 10:37:07 localhost kernel: modified physical RAM map:
Nov 8 10:37:07 localhost kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
Nov 8 10:37:07 localhost kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000000f0000 - 0000000000100000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 0000000000100000 - 00000000bfff0000 (usable)
Nov 8 10:37:07 localhost kernel: modified: 00000000bfff0000 - 00000000bfff8000 (ACPI data)
Nov 8 10:37:07 localhost kernel: modified: 00000000bfff8000 - 00000000c0000000 (ACPI NVS)
Nov 8 10:37:07 localhost kernel: modified: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 8 10:37:07 localhost kernel: modified: 00000000fff80000 - 0000000100000000 (reserved)
Nov 8 10:37:07 localhost kernel: initial memory mapped : 0 - 01800000
Nov 8 10:37:07 localhost kernel: found SMP MP-table at [c00fb930] fb930
Nov 8 10:37:07 localhost kernel: init_memory_mapping: 0000000000000000-00000000377fe000
Nov 8 10:37:07 localhost kernel: 0000000000 - 0000400000 page 4k
Nov 8 10:37:07 localhost kernel: 0000400000 - 0037400000 page 2M
Nov 8 10:37:07 localhost kernel: 0037400000 - 00377fe000 page 4k
Nov 8 10:37:07 localhost kernel: kernel direct mapping tables up to 377fe000 @ 15000-1a000
Nov 8 10:37:07 localhost kernel: RAMDISK: 7fda7000 - 7fff0000
Nov 8 10:37:07 localhost kernel: Allocated new RAMDISK: 00100000 - 003480c5
Nov 8 10:37:07 localhost kernel: Move RAMDISK from 000000007fda7000 - 000000007ffef0c4 to 00100000 - 003480c4
Nov 8 10:37:07 localhost kernel: ACPI: RSDP 000fa980 00014 (v00 AMI )
Nov 8 10:37:07 localhost kernel: ACPI: RSDT bfff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: FACP bfff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: DSDT bfff0120 03362 (v01 VIA VIA_K7 00001000 MSFT 0100000D)
Nov 8 10:37:07 localhost kernel: ACPI: FACS bfff8000 00040
Nov 8 10:37:07 localhost kernel: ACPI: APIC bfff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
Nov 8 10:37:07 localhost kernel: ACPI: Local APIC address 0xfee00000
Nov 8 10:37:07 localhost kernel: 2183MB HIGHMEM available.
Nov 8 10:37:07 localhost kernel: 887MB LOWMEM available.
Nov 8 10:37:07 localhost kernel: mapped low ram: 0 - 377fe000
Nov 8 10:37:07 localhost kernel: low ram: 0 - 377fe000
Nov 8 10:37:07 localhost kernel: Zone PFN ranges:
Nov 8 10:37:07 localhost kernel: DMA 0x00000010 -> 0x00001000
Nov 8 10:37:07 localhost kernel: Normal 0x00001000 -> 0x000377fe
Nov 8 10:37:07 localhost kernel: HighMem 0x000377fe -> 0x000bfff0
Nov 8 10:37:07 localhost kernel: Movable zone start PFN for each node
Nov 8 10:37:07 localhost kernel: early_node_map[2] active PFN ranges
Nov 8 10:37:07 localhost kernel: 0: 0x00000010 -> 0x0000009f
Nov 8 10:37:07 localhost kernel: 0: 0x00000100 -> 0x000bfff0
Nov 8 10:37:07 localhost kernel: On node 0 totalpages: 786303
Nov 8 10:37:07 localhost kernel: free_area_init_node: node 0, pgdat c1418ac0, node_mem_map c157d200
Nov 8 10:37:07 localhost kernel: DMA zone: 32 pages used for memmap
Nov 8 10:37:07 localhost kernel: DMA zone: 0 pages reserved
Nov 8 10:37:07 localhost kernel: DMA zone: 3951 pages, LIFO batch:0
Nov 8 10:37:07 localhost kernel: Normal zone: 1744 pages used for memmap
Nov 8 10:37:07 localhost kernel: Normal zone: 221486 pages, LIFO batch:31
Nov 8 10:37:07 localhost kernel: HighMem zone: 4368 pages used for memmap
Nov 8 10:37:07 localhost kernel: HighMem zone: 554722 pages, LIFO batch:31
Nov 8 10:37:07 localhost kernel: Using APIC driver default
Nov 8 10:37:07 localhost kernel: ACPI: PM-Timer IO Port: 0x808
Nov 8 10:37:07 localhost kernel: ACPI: Local APIC address 0xfee00000
Nov 8 10:37:07 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 8 10:37:07 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 8 10:37:07 localhost kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Nov 8 10:37:07 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 8 10:37:07 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 8 10:37:07 localhost kernel: ACPI: IRQ0 used by override.
Nov 8 10:37:07 localhost kernel: ACPI: IRQ2 used by override.
Nov 8 10:37:07 localhost kernel: ACPI: IRQ9 used by override.
Nov 8 10:37:07 localhost kernel: Using ACPI (MADT) for SMP configuration information
Nov 8 10:37:07 localhost kernel: SMP: Allowing 1 CPUs, 0 hotplug CPUs
Nov 8 10:37:07 localhost kernel: nr_irqs_gsi: 40
Nov 8 10:37:07 localhost kernel: early_res array is doubled to 64 at [16000 - 167ff]
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Nov 8 10:37:07 localhost kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Nov 8 10:37:07 localhost kernel: Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
Nov 8 10:37:07 localhost kernel: Booting paravirtualized kernel on bare hardware
Nov 8 10:37:07 localhost kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
Nov 8 10:37:07 localhost kernel: PERCPU: Embedded 14 pages/cpu @c3000000 s34880 r0 d22464 u4194304
Nov 8 10:37:07 localhost kernel: pcpu-alloc: s34880 r0 d22464 u4194304 alloc=1*4194304
Nov 8 10:37:07 localhost kernel: pcpu-alloc: [0] 0
Nov 8 10:37:07 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159
Nov 8 10:37:07 localhost kernel: Kernel command line: root=/dev/disk/by-uuid/223249f9-5c17-4b09-9886-55ac67009986 ro elevator=deadline nomodeset vga=33556
Nov 8 10:37:07 localhost kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 8 10:37:07 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 8 10:37:07 localhost kernel: Enabling fast FPU save and restore... done.
Nov 8 10:37:07 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 8 10:37:07 localhost kernel: Initializing CPU#0
Nov 8 10:37:07 localhost kernel: allocated 15728000 bytes of page_cgroup
Nov 8 10:37:07 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 8 10:37:07 localhost kernel: Subtract (46 early reservations)
Nov 8 10:37:07 localhost kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE
Nov 8 10:37:07 localhost kernel: #2 [0001000000 - 0001574184] TEXT DATA BSS
Nov 8 10:37:07 localhost kernel: #3 [0001575000 - 000157b108] BRK
Nov 8 10:37:07 localhost kernel: #4 [00000fb940 - 0000100000] BIOS reserved
Nov 8 10:37:07 localhost kernel: #5 [00000fb930 - 00000fb940] MP-table mpf
Nov 8 10:37:07 localhost kernel: #6 [000009fc00 - 00000f6630] BIOS reserved
Nov 8 10:37:07 localhost kernel: #7 [00000f6738 - 00000fb930] BIOS reserved
Nov 8 10:37:07 localhost kernel: #8 [00000f6630 - 00000f6738] MP-table mpc
Nov 8 10:37:07 localhost kernel: #9 [0000010000 - 0000011000] TRAMPOLINE
Nov 8 10:37:07 localhost kernel: #10 [0000011000 - 0000015000] ACPI WAKEUP
Nov 8 10:37:07 localhost kernel: #11 [0000015000 - 0000016000] PGTABLE
Nov 8 10:37:07 localhost kernel: #12 [0000100000 - 0000349000] NEW RAMDISK
Nov 8 10:37:07 localhost kernel: #13 [000157c000 - 000157d000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #14 [000157d000 - 0002d7d000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #15 [00015741c0 - 00015741c4] BOOTMEM
Nov 8 10:37:07 localhost kernel: #16 [0001574200 - 00015742c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #17 [00015742c0 - 0001574314] BOOTMEM
Nov 8 10:37:07 localhost kernel: #18 [0002d7d000 - 0002d80000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #19 [0001574340 - 0001574410] BOOTMEM
Nov 8 10:37:07 localhost kernel: #20 [0002d80000 - 0002d8c000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #21 [0001574440 - 0001574467] BOOTMEM
Nov 8 10:37:07 localhost kernel: #22 [0001574480 - 0001574598] BOOTMEM
Nov 8 10:37:07 localhost kernel: #23 [00015745c0 - 0001574600] BOOTMEM
Nov 8 10:37:07 localhost kernel: #24 [0001574600 - 0001574640] BOOTMEM
Nov 8 10:37:07 localhost kernel: #25 [0001574640 - 0001574680] BOOTMEM
Nov 8 10:37:07 localhost kernel: #26 [0001574680 - 00015746c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #27 [00015746c0 - 0001574700] BOOTMEM
Nov 8 10:37:07 localhost kernel: #28 [0001574700 - 0001574740] BOOTMEM
Nov 8 10:37:07 localhost kernel: #29 [0001574740 - 0001574780] BOOTMEM
Nov 8 10:37:07 localhost kernel: #30 [0001574780 - 00015747c0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #31 [00015747c0 - 0001574800] BOOTMEM
Nov 8 10:37:07 localhost kernel: #32 [0001574800 - 0001574810] BOOTMEM
Nov 8 10:37:07 localhost kernel: #33 [0001574840 - 00015748a5] BOOTMEM
Nov 8 10:37:07 localhost kernel: #34 [00015748c0 - 0001574925] BOOTMEM
Nov 8 10:37:07 localhost kernel: #35 [0003000000 - 000300e000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #36 [0001574940 - 0001574944] BOOTMEM
Nov 8 10:37:07 localhost kernel: #37 [0001574980 - 0001574984] BOOTMEM
Nov 8 10:37:07 localhost kernel: #38 [00015749c0 - 00015749c4] BOOTMEM
Nov 8 10:37:07 localhost kernel: #39 [0001574a00 - 0001574a04] BOOTMEM
Nov 8 10:37:07 localhost kernel: #40 [0001574a40 - 0001574af0] BOOTMEM
Nov 8 10:37:07 localhost kernel: #41 [0001574b00 - 0001574ba8] BOOTMEM
Nov 8 10:37:07 localhost kernel: #42 [0002d8c000 - 0002d90000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #43 [0002d90000 - 0002e10000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #44 [0002e10000 - 0002e50000] BOOTMEM
Nov 8 10:37:07 localhost kernel: #45 [000300e000 - 0003f0dd80] BOOTMEM
Nov 8 10:37:07 localhost kernel: Initializing HighMem for node 0 (000377fe:000bfff0)
Nov 8 10:37:07 localhost kernel: Memory: 3096392k/3145664k available (2987k kernel code, 48820k reserved, 1237k data, 416k init, 2236360k highmem)
Nov 8 10:37:07 localhost kernel: virtual kernel memory layout:
Nov 8 10:37:07 localhost kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Nov 8 10:37:07 localhost kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Nov 8 10:37:07 localhost kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
Nov 8 10:37:07 localhost kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
Nov 8 10:37:07 localhost kernel: .init : 0xc1421000 - 0xc1489000 ( 416 kB)
Nov 8 10:37:07 localhost kernel: .data : 0xc12eac4c - 0xc1420200 (1237 kB)
Nov 8 10:37:07 localhost kernel: .text : 0xc1000000 - 0xc12eac4c (2987 kB)
Nov 8 10:37:07 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Nov 8 10:37:07 localhost kernel: SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Nov 8 10:37:07 localhost kernel: Hierarchical RCU implementation.
Nov 8 10:37:07 localhost kernel: RCU-based detection of stalled CPUs is disabled.
Nov 8 10:37:07 localhost kernel: Verbose stalled-CPUs detection is disabled.
Nov 8 10:37:07 localhost kernel: NR_IRQS:512
Nov 8 10:37:07 localhost kernel: Console: colour VGA+ 132x43
Nov 8 10:37:07 localhost kernel: console [tty0] enabled
Nov 8 10:37:07 localhost kernel: Fast TSC calibration using PIT
Nov 8 10:37:07 localhost kernel: Detected 1666.888 MHz processor.
Nov 8 10:37:07 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3335.68 BogoMIPS (lpj=5556293)
Nov 8 10:37:07 localhost kernel: pid_max: default: 32768 minimum: 301
Nov 8 10:37:07 localhost kernel: Security Framework initialized
Nov 8 10:37:07 localhost kernel: Mount-cache hash table entries: 512
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys ns
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys cpuacct
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys memory
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys devices
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys freezer
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys net_cls
Nov 8 10:37:07 localhost kernel: Initializing cgroup subsys blkio
Nov 8 10:37:07 localhost kernel: mce: CPU supports 4 MCE banks
Nov 8 10:37:07 localhost kernel: Performance Events: AMD PMU driver.
Nov 8 10:37:07 localhost kernel: ... version: 0
Nov 8 10:37:07 localhost kernel: ... bit width: 48
Nov 8 10:37:07 localhost kernel: ... generic registers: 4
Nov 8 10:37:07 localhost kernel: ... value mask: 0000ffffffffffff
Nov 8 10:37:07 localhost kernel: ... max period: 00007fffffffffff
Nov 8 10:37:07 localhost kernel: ... fixed-purpose events: 0
Nov 8 10:37:07 localhost kernel: ... event mask: 000000000000000f
Nov 8 10:37:07 localhost kernel: SMP alternatives: switching to UP code
Nov 8 10:37:07 localhost kernel: Freeing SMP alternatives: 12k freed
Nov 8 10:37:07 localhost kernel: ACPI: Core revision 20100428
Nov 8 10:37:07 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 8 10:37:07 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 8 10:37:07 localhost kernel: CPU0: AMD Athlon(tm) XP 2000+ stepping 00
Nov 8 10:37:07 localhost kernel: Brought up 1 CPUs
Nov 8 10:37:07 localhost kernel: Total of 1 processors activated (3335.68 BogoMIPS).
Nov 8 10:37:07 localhost kernel: devtmpfs: initialized
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 16
Nov 8 10:37:07 localhost kernel: ACPI: bus type pci registered
Nov 8 10:37:07 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
Nov 8 10:37:07 localhost kernel: PCI: Using configuration type 1 for base access
Nov 8 10:37:07 localhost kernel: bio: create slab <bio-0> at 0
Nov 8 10:37:07 localhost kernel: ACPI: EC: Look up EC in DSDT
Nov 8 10:37:07 localhost kernel: ACPI: Interpreter enabled
Nov 8 10:37:07 localhost kernel: ACPI: (supports S0 S3 S4 S5)
Nov 8 10:37:07 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [URP1] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [URP2] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [FDDP] (off)
Nov 8 10:37:07 localhost kernel: ACPI: Power Resource [LPTP] (off)
Nov 8 10:37:07 localhost kernel: ACPI: No dock devices found.
Nov 8 10:37:07 localhost kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Nov 8 10:37:07 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
Nov 8 10:37:07 localhost kernel: pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: supports D1
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: reg 10: [mem 0xdc000000-0xdfffffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: reg 30: [mem 0xdbff0000-0xdbffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: reg 20: [io 0xe400-0xe41f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.0: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: reg 20: [io 0xe800-0xe81f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.1: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: reg 20: [io 0xec00-0xec1f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.2: PME# disabled
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: reg 10: [mem 0xdbfeff00-0xdbfeffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
Nov 8 10:37:07 localhost kernel: pci 0000:00:10.3: PME# disabled
Nov 8 10:37:07 localhost kernel: HPET not enabled in BIOS. You might try hpet=force boot option
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.0: quirk: [io 0x0800-0x087f] claimed by vt8235 PM
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.0: quirk: [io 0x0400-0x040f] claimed by vt8235 SMB
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.1: reg 20: [io 0xfc00-0xfc0f]
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:11.5: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 14: [io 0xc800-0xc8ff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 18: [mem 0xd7ef0000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: reg 30: [mem 0xd7ec0000-0xd7edffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: supports D1 D2
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xb7d00000-0xd7cfffff pref]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: on NUMA node 0
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 8 10:37:07 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 8 10:37:07 localhost kernel: HEST: Table is not found!
Nov 8 10:37:07 localhost kernel: vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none
Nov 8 10:37:07 localhost kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
Nov 8 10:37:07 localhost kernel: vgaarb: loaded
Nov 8 10:37:07 localhost kernel: PCI: Using ACPI for IRQ routing
Nov 8 10:37:07 localhost kernel: PCI: pci_cache_line_size set to 32 bytes
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: address space collision: [mem 0xb7d00000-0xd7cfffff pref] conflicts with System RAM [mem 0x00100000-0xbffeffff]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: reserve RAM buffer: 000000000009fc00 - 000000000009ffff
Nov 8 10:37:07 localhost kernel: reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff
Nov 8 10:37:07 localhost kernel: NetLabel: Initializing
Nov 8 10:37:07 localhost kernel: NetLabel: domain hash size = 128
Nov 8 10:37:07 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 8 10:37:07 localhost kernel: NetLabel: unlabeled traffic allowed by default
Nov 8 10:37:07 localhost kernel: Switching to clocksource tsc
Nov 8 10:37:07 localhost kernel: pnp: PnP ACPI init
Nov 8 10:37:07 localhost kernel: ACPI: bus type pnp registered
Nov 8 10:37:07 localhost kernel: pnp 00:01: disabling [io 0x0820-0x0821] because it overlaps 0000:00:11.0 BAR 13 [io 0x0800-0x087f]
Nov 8 10:37:07 localhost kernel: pnp: PnP ACPI: found 9 devices
Nov 8 10:37:07 localhost kernel: ACPI: ACPI bus type pnp unregistered
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x0290-0x0297] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x03f0-0x03f1] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x04d0-0x04d1] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [io 0x0400-0x040f] has been reserved
Nov 8 10:37:07 localhost kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: BAR 15: assigned [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: BAR 0: set to [mem 0xc0000000-0xcfffffff pref] (PCI address [0xc0000000-0xcfffffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: setting latency timer to 64
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xd7e00000-0xd7efffff]
Nov 8 10:37:07 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 2
Nov 8 10:37:07 localhost kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 8 10:37:07 localhost kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 8 10:37:07 localhost kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Nov 8 10:37:07 localhost kernel: TCP: Hash tables configured (established 131072 bind 65536)
Nov 8 10:37:07 localhost kernel: TCP reno registered
Nov 8 10:37:07 localhost kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 1
Nov 8 10:37:07 localhost kernel: pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Nov 8 10:37:07 localhost kernel: pci 0000:00:0b.0: Boot video device
Nov 8 10:37:07 localhost kernel: PCI: CLS 32 bytes, default 32
Nov 8 10:37:07 localhost kernel: Unpacking initramfs...
Nov 8 10:37:07 localhost kernel: Freeing initrd memory: 2340k freed
Nov 8 10:37:07 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Nov 8 10:37:07 localhost kernel: apm: overridden by ACPI.
Nov 8 10:37:07 localhost kernel: Scanning for low memory corruption every 60 seconds
Nov 8 10:37:07 localhost kernel: audit: initializing netlink socket (disabled)
Nov 8 10:37:07 localhost kernel: type=2000 audit(1289212597.233:1): initialized
Nov 8 10:37:07 localhost kernel: highmem bounce pool size: 64 pages
Nov 8 10:37:07 localhost kernel: VFS: Disk quotas dquot_6.5.2
Nov 8 10:37:07 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Nov 8 10:37:07 localhost kernel: msgmni has been set to 1684
Nov 8 10:37:07 localhost kernel: alg: No test for stdrng (krng)
Nov 8 10:37:07 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Nov 8 10:37:07 localhost kernel: io scheduler noop registered
Nov 8 10:37:07 localhost kernel: io scheduler deadline registered (default)
Nov 8 10:37:07 localhost kernel: io scheduler cfq registered
Nov 8 10:37:07 localhost kernel: ERST: Table is not found!
Nov 8 10:37:07 localhost kernel: isapnp: Scanning for PnP cards...
Nov 8 10:37:07 localhost kernel: isapnp: No Plug & Play device found
Nov 8 10:37:07 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 8 10:37:07 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 8 10:37:07 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 8 10:37:07 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 8 10:37:07 localhost kernel: mice: PS/2 mouse device common for all mice
Nov 8 10:37:07 localhost kernel: cpuidle: using governor ladder
Nov 8 10:37:07 localhost kernel: cpuidle: using governor menu
Nov 8 10:37:07 localhost kernel: TCP cubic registered
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 17
Nov 8 10:37:07 localhost kernel: Using IPI No-Shortcut mode
Nov 8 10:37:07 localhost kernel: PM: Resume from disk failed.
Nov 8 10:37:07 localhost kernel: registered taskstats version 1
Nov 8 10:37:07 localhost kernel: Initalizing network drop monitor service
Nov 8 10:37:07 localhost kernel: Freeing unused kernel memory: 416k freed
Nov 8 10:37:07 localhost kernel: udev[31]: starting version 163
Nov 8 10:37:07 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Nov 8 10:37:07 localhost kernel: Linux agpgart interface v0.103
Nov 8 10:37:07 localhost kernel: agpgart: Detected VIA KT400/KT400A/KT600 chipset
Nov 8 10:37:07 localhost kernel: agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
Nov 8 10:37:07 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Nov 8 10:37:07 localhost kernel: [drm] VGACON disable radeon kernel modesetting.
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: enabling device (0000 -> 0003)
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 8 10:37:07 localhost kernel: [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
Nov 8 10:37:07 localhost kernel: SCSI subsystem initialized
Nov 8 10:37:07 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 8 10:37:07 localhost kernel: FDC 0 is a post-1991 82077
Nov 8 10:37:07 localhost kernel: libata version 3.00 loaded.
Nov 8 10:37:07 localhost kernel: pata_via 0000:00:11.1: version 0.3.4
Nov 8 10:37:07 localhost kernel: pata_via 0000:00:11.1: can't derive routing for PCI INT A
Nov 8 10:37:07 localhost kernel: scsi0 : pata_via
Nov 8 10:37:07 localhost kernel: scsi1 : pata_via
Nov 8 10:37:07 localhost kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Nov 8 10:37:07 localhost kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Nov 8 10:37:07 localhost kernel: ata1.00: ATA-6: ST380011A, 3.04, max UDMA/100
Nov 8 10:37:07 localhost kernel: ata1.00: 156301488 sectors, multi 16: LBA48
Nov 8 10:37:07 localhost kernel: ata1.00: configured for UDMA/100
Nov 8 10:37:07 localhost kernel: scsi 0:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: ata2.00: ATAPI: LITE-ON DVD SOHD-16P9S, FS0J, max UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.01: ATAPI: LITE-ON LTR-52246S, 6S0F, max UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.00: configured for UDMA/33
Nov 8 10:37:07 localhost kernel: ata2.01: configured for UDMA/33
Nov 8 10:37:07 localhost kernel: scsi 1:0:0:0: CD-ROM LITE-ON DVD SOHD-16P9S FS0J PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: scsi 1:0:1:0: CD-ROM LITE-ON LTR-52246S 6S0F PQ: 0 ANSI: 5
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 8 10:37:07 localhost kernel: sda:sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
Nov 8 10:37:07 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 8 10:37:07 localhost kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Nov 8 10:37:07 localhost kernel: sda1 sda2 sda3 sda4 < sda5 sda6 sda7sr1: scsi3-mmc drive: 15x/52x writer cd/rw xa/form2 cdda tray
Nov 8 10:37:07 localhost kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Nov 8 10:37:07 localhost kernel: sda8 sda9 sda10 >
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda2): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
Nov 8 10:37:07 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Nov 8 10:37:07 localhost kernel: rtc0: alarms up to one year, y3k, 114 bytes nvram
Nov 8 10:37:07 localhost kernel: udev[496]: starting version 163
Nov 8 10:37:07 localhost kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Nov 8 10:37:07 localhost kernel: Disabling lock debugging due to kernel taint
Nov 8 10:37:07 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 8 10:37:07 localhost kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
Nov 8 10:37:07 localhost kernel: sr 1:0:1:0: Attached scsi generic sg2 type 5
Nov 8 10:37:07 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 8 10:37:07 localhost kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
Nov 8 10:37:07 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver usbfs
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver hub
Nov 8 10:37:07 localhost kernel: usbcore: registered new device driver usb
Nov 8 10:37:07 localhost kernel: psmouse serio1: ID: 10 00 64
Nov 8 10:37:07 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
Nov 8 10:37:07 localhost kernel: hub 1-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800
Nov 8 10:37:07 localhost kernel: hub 2-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Nov 8 10:37:07 localhost kernel: uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 23
Nov 8 10:37:07 localhost kernel: [fglrx] Maximum main memory to use for locked dma buffers: 2880 MBytes.
Nov 8 10:37:07 localhost kernel: [fglrx] vendor: 1002 device: 9495 count: 1
Nov 8 10:37:07 localhost kernel: [fglrx] ioport: bar 1, base 0xc800, size: 0x100
Nov 8 10:37:07 localhost kernel: pci 0000:01:00.0: PCI: Disallowing DAC for device
Nov 8 10:37:07 localhost kernel: [fglrx] Kernel PAT support is enabled
Nov 8 10:37:07 localhost kernel: [fglrx] module loaded - fglrx 8.78.6 [Oct 5 2010] with 1 minors
Nov 8 10:37:07 localhost kernel: hub 3-0:1.0: USB hub found
Nov 8 10:37:07 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 8 10:37:07 localhost kernel: ACPI: acpi_idle registered with cpuidle
Nov 8 10:37:07 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Nov 8 10:37:07 localhost kernel: ACPI: Power Button [PWRB]
Nov 8 10:37:07 localhost kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Nov 8 10:37:07 localhost kernel: ACPI: Sleep Button [SLPB]
Nov 8 10:37:07 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Nov 8 10:37:07 localhost kernel: ACPI: Power Button [PWRF]
Nov 8 10:37:07 localhost kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2
Nov 8 10:37:07 localhost kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
Nov 8 10:37:07 localhost kernel: ACPI: resource vt596_smbus [io 0x0400-0x0407] conflicts with ACPI region SMOV [??? 0x00000400-0x00000406 flags 0x56]
Nov 8 10:37:07 localhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 8 10:37:07 localhost kernel: VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Nov 8 10:37:07 localhost kernel: VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 8
Nov 8 10:37:07 localhost kernel: NET: Registered protocol family 20
Nov 8 10:37:07 localhost kernel: usb 1-1: reset full speed USB device using uhci_hcd and address 2
Nov 8 10:37:07 localhost kernel: usbcore: registered new interface driver speedtch
Nov 8 10:37:07 localhost kernel: speedtch 1-1:1.0: found stage 1 firmware speedtch-1.bin.4.00
Nov 8 10:37:07 localhost kernel: speedtch 1-1:1.0: found stage 2 firmware speedtch-2.bin.4.00
Nov 8 10:37:07 localhost kernel: ATM dev 0: ADSL line is synchronising
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda2): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda6): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda6): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: EXT3-fs: barriers not enabled
Nov 8 10:37:07 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda3): using internal journal
Nov 8 10:37:07 localhost kernel: EXT3-fs (sda3): mounted filesystem with writeback data mode
Nov 8 10:37:07 localhost kernel: EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
Nov 8 10:37:07 localhost kernel: Adding 1052220k swap on /dev/sda5. Priority:-1 extents:1 across:1052220k
Nov 8 10:37:09 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 8 10:37:09 localhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 8 10:37:09 localhost kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Nov 8 10:37:09 localhost kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Nov 8 10:37:09 localhost kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Nov 8 10:37:11 localhost kernel: PPP generic driver version 2.4.2
Nov 8 10:37:13 localhost kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
Nov 8 10:37:13 localhost kernel: [fglrx] [agp] enabling AGP with mode=0x1f000b1a
Nov 8 10:37:13 localhost kernel: agpgart-via 0000:00:00.0: AGP 3.5 bridge
Nov 8 10:37:13 localhost kernel: agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
Nov 8 10:37:13 localhost kernel: fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
Nov 8 10:37:13 localhost kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Nov 8 10:37:13 localhost kernel: [fglrx] Setup AGP aperture
Nov 8 10:37:13 localhost kernel: [fglrx] Could not enable MSI; System prevented initialization
Nov 8 10:37:13 localhost kernel: [fglrx] Firegl kernel thread PID: 2202
Nov 8 10:37:13 localhost kernel: [fglrx] IRQ 16 Enabled
Nov 8 10:37:14 localhost kernel: [fglrx] Gart cacheable size:1318 M.
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fd0a000, size:2f6000
Nov 8 10:37:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:3fffd000, size:3000
Nov 8 10:37:20 localhost kernel: ATM dev 0: ADSL line is up (5312 kb/s down | 320 kb/s up)
Nov 8 10:38:09 localhost kernel: [fglrx] IRQ 16 Disabled
Nov 8 10:38:09 localhost kernel: BUG: scheduling while atomic: X/2191/0x00000002
Nov 8 10:38:09 localhost kernel: Modules linked in: pppoatm ppp_generic slhc xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ext4 jbd2 crc16 ext2 speedtch usbatm atm snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device i2c_viapro snd soundcore button thermal processor via_ircc uhci_hcd irda crc_ccitt psmouse usbcore fglrx(P) shpchp pcspkr serio_raw pci_hotplug sg evdev rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sd_mod sr_mod cdrom pata_acpi pata_via libata floppy scsi_mod radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core via_agp agpgart
Nov 8 10:38:09 localhost kernel: Pid: 2191, comm: X Tainted: P 2.6.35-ARCH #1
Nov 8 10:38:09 localhost kernel: Call Trace:
Nov 8 10:38:09 localhost kernel: [<c1034d1d>] __schedule_bug+0x5d/0x70
Nov 8 10:38:09 localhost kernel: [<c12e6dcf>] schedule+0x47f/0x6f0
Nov 8 10:38:09 localhost kernel: [<f8761b22>] ? KAS_Event_Set+0x92/0xa0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c12e9505>] ? _raw_spin_unlock_irqrestore+0x25/0x30
Nov 8 10:38:09 localhost kernel: [<f87624a6>] KAS_Thread_WaitForFinish+0x86/0xc0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c105eb30>] ? autoremove_wake_function+0x0/0x40
Nov 8 10:38:09 localhost kernel: [<f877bafa>] MCIL_WorkerThread+0x1da/0x2c0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8841790>] ? PassiveRing_Cleanup+0x60/0xc0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8791e58>] ? firegl_trace+0x28/0x190 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f8840d01>] IRQMGR_FreeResources+0x21/0x60 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f877e87e>] irqmgr_wrap_shutdown+0x17e/0x1d0 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f876e4c9>] ? firegl_takedown+0x989/0xa60 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f885600d>] ? amdPcsClose+0x3d/0x40 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f876d35f>] ? firegl_release+0x14f/0x220 [fglrx]
Nov 8 10:38:09 localhost kernel: [<f875e5be>] ? ip_firegl_release+0xe/0x10 [fglrx]
Nov 8 10:38:09 localhost kernel: [<c10f8153>] ? fput+0xf3/0x1f0
Nov 8 10:38:09 localhost kernel: [<c10f4f69>] ? filp_close+0x49/0x70
Nov 8 10:38:09 localhost kernel: [<c1046d57>] ? put_files_struct+0x87/0x100
Nov 8 10:38:09 localhost kernel: [<c1046e72>] ? exit_files+0x42/0x60
Nov 8 10:38:09 localhost kernel: [<c104727a>] ? do_exit+0x14a/0x770
Nov 8 10:38:09 localhost kernel: [<c1053f0d>] ? __sigqueue_free+0x2d/0x30
Nov 8 10:38:09 localhost kernel: [<c1053162>] ? recalc_sigpending+0x12/0x30
Nov 8 10:38:09 localhost kernel: [<c1047ab9>] ? do_group_exit+0x39/0xa0
Nov 8 10:38:09 localhost kernel: [<c10563ad>] ? get_signal_to_deliver+0x25d/0x470
Nov 8 10:38:09 localhost kernel: [<c1054e12>] ? __send_signal+0x162/0x390
Nov 8 10:38:09 localhost kernel: [<c1002909>] ? do_signal+0x69/0x870
Nov 8 10:38:09 localhost kernel: [<c105592f>] ? do_send_specific+0x7f/0xc0
Nov 8 10:38:09 localhost kernel: [<c1183c90>] ? _atomic_dec_and_lock+0x50/0x70
Nov 8 10:38:09 localhost kernel: [<c110e426>] ? mntput_no_expire+0x16/0x90
Nov 8 10:38:09 localhost kernel: [<c1053162>] ? recalc_sigpending+0x12/0x30
Nov 8 10:38:09 localhost kernel: [<c1053e65>] ? sigprocmask+0x75/0xf0
Nov 8 10:38:09 localhost kernel: [<c10567b4>] ? sys_rt_sigprocmask+0xc4/0xe0
Nov 8 10:38:09 localhost kernel: [<c10567b4>] ? sys_rt_sigprocmask+0xc4/0xe0
Nov 8 10:38:09 localhost kernel: [<c10033fd>] ? do_notify_resume+0x5d/0x70
Nov 8 10:38:09 localhost kernel: [<c12e9af8>] ? work_notifysig+0x13/0x1b
Nov 8 10:38:10 localhost kernel: [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
Nov 8 10:38:10 localhost kernel: [fglrx] [agp] enabling AGP with mode=0x1f000b1a
Nov 8 10:38:10 localhost kernel: agpgart-via 0000:00:00.0: AGP 3.5 bridge
Nov 8 10:38:10 localhost kernel: agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
Nov 8 10:38:10 localhost kernel: fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
Nov 8 10:38:10 localhost kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Nov 8 10:38:10 localhost kernel: [fglrx] Setup AGP aperture
Nov 8 10:38:10 localhost kernel: [fglrx] Firegl kernel thread PID: 2426
Nov 8 10:38:10 localhost kernel: [fglrx] IRQ 16 Enabled
Nov 8 10:38:11 localhost kernel: [fglrx] Gart cacheable size:1318 M.
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fd0a000, size:2f6000
Nov 8 10:38:11 localhost kernel: [fglrx] Reserved FB block: Unshared offset:3fffd000, size:3000
Nov 8 10:38:33 localhost kernel: [fglrx] IRQ 16 Disabled
2) Sometimes computer freeze while I working in KDE. I don't save logs, but I remeber that:
X: page allocation failure
in kernel.log.
Can anyone has tips or workarounds for this bugs (or just catalyst proprietary driver is piece of sh*t?)?
Can anyone help?

I guess I have the same issue ( https://bbs.archlinux.org/viewtopic.php?id=108083 ). I removed the catalyst package and installed the open source driver (packages: xf86-video-ati and ati-dri) as a workaround to wait until the issue is resolved. If you want to do that, remember to update your xorg.conf (you can simple rename that... it's not needed with ati driver) and rc.conf (unblacklist the radeon module). Maybe downgrading to Xorg 1.8 and installing older driver would help. Hopefully somebody with greater knowledge will notice this problem.
Last edited by kleofas (2010-11-11 12:42:38)

Arch64 RAM issues [Solved]

So I thought everything was fine until an application told me I had 4gb of RAM which is a far cry from the installed 16gb.
I did plenty of digging around and narrowed it down to a couple possibilities, but first my investigation:
I started with free:
[vuvffufg@HereAndNow-Main ~]$ free
total used free shared buff/cache available
Mem: 4015688 858084 115144 24832 3042460 2860360
Swap: 16777212 22460 16754752
As you can see it shows their is 4gb of RAM much as the application did.
You can see I have 16gb of swap; I am aware and am not confusing swap with RAM, I damn well have 4x4gb sticks according to the memtest86+ option on boot.
So then I thought hardware and tried dmidecode --type memory:
[vuvffufg@HereAndNow-Main ~]$ sudo dmidecode --type memory
[sudo] password for vuvffufg:
# dmidecode 2.12
SMBIOS 2.7 present.
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 8192 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0009
0x000A
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 2 3
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 4 5
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 6 7
Current Speed: 60 ns
Type: DIMM SDRAM
Installed Size: 536870912 MB (Single-bank Connection)
Enabled Size: 536870912 MB (Single-bank Connection)
Error Status: OK
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x002E, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm0
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB481
Asset Tag: Dimm0_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0030, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm1
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm1_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm2
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: ADADB473
Asset Tag: Dimm2_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 2
Configured Clock Speed: 667 MHz
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x002C
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: Node0_Dimm3
Bank Locator: Node0_Bank0
Type: DDR3
Type Detail: Synchronous Unbuffered (Unregistered)
Speed: 667 MHz
Manufacturer: Corsair
Serial Number: 00000000
Asset Tag: Dimm3_AssetTag
Part Number: CMZ8GX3M2A160
Rank: 1
Configured Clock Speed: 667 MHz
Found it quite strange that the OS can obviously see the memory it just isn't being allocated, also what is with the slow clock speeds?
I found a similar output with lshw.
So I moved on to checking how it is actually initialized in dmesg, and honestly a lot of what was output I don't quite understand, I noticed that some memory was being reserved by the RAM map given by BIOs yet have no obvious way of disabling the BIOs RAM scheduler.
[vuvffufg@HereAndNow-Main ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.2-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] tseg: 00bf800000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be857fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be858000-0x00000000bea2ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea30000-0x00000000bea39fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea3a000-0x00000000bee2bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee2c000-0x00000000bf159fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf15a000-0x00000000bf15afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf15b000-0x00000000bf360fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf361000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS F2 07/15/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000013f000000 aka 5104M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13ee00000-0x13effffff]
[ 0.000000] [mem 0x13ee00000-0x13effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x13edfffff]
[ 0.000000] [mem 0x120000000-0x13edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x11fffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe857fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbe7fffff] page 2M
[ 0.000000] [mem 0xbe800000-0xbe857fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] [mem 0xbf15a000-0xbf15afff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] [mem 0xbf361000-0xbf3fffff] page 4k
[ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M
[ 0.000000] RAMDISK: [mem 0x377f0000-0x37beffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA32070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA37D20 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000BEA32158 005BC1 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE26F80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA37E18 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEA37EB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEA37F00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEA37F40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BEA37F78 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: IVRS 0x00000000BEA39690 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13eff9000-0x13effcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013a600000-ffff88013e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbe857fff]
[ 0.000000] node 0: [mem 0xbf15a000-0xbf15afff]
[ 0.000000] node 0: [mem 0xbf361000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x13effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13effffff]
[ 0.000000] On node 0 totalpages: 1039508
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12148 pages used for memmap
[ 0.000000] DMA32 zone: 777464 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258047 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe858000-0xbea2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea30000-0xbea39fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea3a000-0xbee2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee2c000-0xbf159fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf15b000-0xbf360fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023243
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=13722890-9f97-423a-bfec-7c95d6e8174e rw quiet splash iommu=pt
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 4009504K/4158032K available (5533K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 148528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.290 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.43 BogoMIPS (lpj=13394300)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20141107
[ 0.002553] ACPI: All ACPI Tables successfully acquired
[ 0.002750] Security Framework initialized
[ 0.002758] Yama: becoming mindful.
[ 0.002999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004346] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004926] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004931] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005146] Initializing cgroup subsys memory
[ 0.005153] Initializing cgroup subsys devices
[ 0.005155] Initializing cgroup subsys freezer
[ 0.005158] Initializing cgroup subsys net_cls
[ 0.005160] Initializing cgroup subsys blkio
[ 0.005177] CPU: Physical Processor ID: 0
[ 0.005178] CPU: Processor Core ID: 0
[ 0.005180] mce: CPU supports 7 MCE banks
[ 0.005185] LVT offset 1 assigned for vector 0xf9
[ 0.005190] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.005254] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.005835] ftrace: allocating 21170 entries in 83 pages
[ 0.087004] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.120030] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.224266] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224270] ... version: 0
[ 0.224271] ... bit width: 48
[ 0.224272] ... generic registers: 6
[ 0.224273] ... value mask: 0000ffffffffffff
[ 0.224274] ... max period: 00007fffffffffff
[ 0.224275] ... fixed-purpose events: 0
[ 0.224276] ... event mask: 000000000000003f
[ 0.237668] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.244346] x86: Booting SMP configuration:
[ 0.244347] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.354188] x86: Booted up 1 node, 8 CPUs
[ 0.354192] smpboot: Total of 8 processors activated (64318.50 BogoMIPS)
[ 0.364078] devtmpfs: initialized
[ 0.366485] PM: Registering ACPI NVS region [mem 0xbea3a000-0xbee2bfff] (4136960 bytes)
[ 0.366531] PM: Registering ACPI NVS region [mem 0xbf15b000-0xbf360fff] (2121728 bytes)
[ 0.366716] pinctrl core: initialized pinctrl subsystem
[ 0.366744] RTC time: 18:28:15, date: 04/01/15
[ 0.366834] NET: Registered protocol family 16
[ 0.377691] cpuidle: using governor ladder
[ 0.391032] cpuidle: using governor menu
[ 0.391080] ACPI: bus type PCI registered
[ 0.391082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.391143] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.391146] PCI: not using MMCONFIG
[ 0.391147] PCI: Using configuration type 1 for base access
[ 0.391148] PCI: Using configuration type 1 for extended access
[ 0.391412] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.391413] mtrr: probably your BIOS does not setup all CPUs.
[ 0.391413] mtrr: corrected configuration.
[ 0.404756] ACPI: Added _OSI(Module Device)
[ 0.404758] ACPI: Added _OSI(Processor Device)
[ 0.404759] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.404760] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.406816] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.410092] ACPI: Interpreter enabled
[ 0.410097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.410100] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.410113] ACPI: (supports S0 S3 S4 S5)
[ 0.410115] ACPI: Using IOAPIC for interrupt routing
[ 0.410239] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.410276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.410593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.416283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.416288] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.416292] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.416712] PCI host bridge to bus 0000:00
[ 0.416715] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.416717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.416718] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.416720] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.416721] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.416723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.416724] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.416726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.416735] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.416847] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.416951] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.416985] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.417032] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.417072] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.417104] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.417151] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.417185] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.417217] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.417263] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.417308] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.417322] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.417329] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.417336] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.417343] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.417350] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.417357] pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
[ 0.417461] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.417471] pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
[ 0.417556] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.417595] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.417609] pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
[ 0.417671] pci 0000:00:12.2: supports D1 D2
[ 0.417672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.417721] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.417760] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.417770] pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
[ 0.417851] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.417891] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.417905] pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
[ 0.417966] pci 0000:00:13.2: supports D1 D2
[ 0.417967] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.418015] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.418053] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.418166] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.418176] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.418183] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.418190] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.418197] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.418204] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.418219] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.418220] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.418221] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.418222] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.418300] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.418316] pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.418365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.418410] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.418445] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.418561] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.418627] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.418661] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.418671] pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
[ 0.418754] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.418790] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.418800] pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
[ 0.418883] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.418922] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.418936] pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
[ 0.418998] pci 0000:00:16.2: supports D1 D2
[ 0.418999] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.419045] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.419083] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.419160] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.419231] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.419304] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.419379] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.419451] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.419570] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000
[ 0.419581] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.419591] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.419600] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.419607] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.419614] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.419708] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.419718] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.424396] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.424400] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.424402] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.424406] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.424450] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.424463] pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe300fff 64bit]
[ 0.424519] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431063] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.431067] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.431115] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.431125] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.431131] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.431137] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.431143] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.431149] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.431155] pci 0000:03:00.0: reg 0x24: [mem 0xfe210000-0xfe2101ff]
[ 0.431161] pci 0000:03:00.0: reg 0x30: [mem 0xfe200000-0xfe20ffff pref]
[ 0.431194] pci 0000:03:00.0: PME# supported from D3hot
[ 0.437733] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.437737] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.437739] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.437784] pci 0000:04:06.0: [10ec:8169] type 00 class 0x020000
[ 0.437802] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.437812] pci 0000:04:06.0: reg 0x14: [mem 0xfe121000-0xfe1210ff]
[ 0.437855] pci 0000:04:06.0: reg 0x30: [mem 0xfe100000-0xfe11ffff pref]
[ 0.437888] pci 0000:04:06.0: supports D1 D2
[ 0.437889] pci 0000:04:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.437947] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.437965] pci 0000:04:0e.0: reg 0x10: [mem 0xfe120000-0xfe1207ff]
[ 0.437975] pci 0000:04:0e.0: reg 0x14: [io 0xc100-0xc17f]
[ 0.438055] pci 0000:04:0e.0: supports D2
[ 0.438056] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.438114] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.438117] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.438120] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.438123] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.438125] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.438126] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.438128] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.438129] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.438131] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.438132] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.438151] pci_bus 0000:00: on NUMA node 0
[ 0.438559] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.438620] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.438682] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.438744] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.438794] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.438856] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.438896] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.438935] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.439110] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.439112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439114] vgaarb: loaded
[ 0.439115] vgaarb: bridge control possible 0000:01:00.0
[ 0.439189] PCI: Using ACPI for IRQ routing
[ 0.445486] PCI: pci_cache_line_size set to 64 bytes
[ 0.445539] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.445541] e820: reserve RAM buffer [mem 0xbe858000-0xbfffffff]
[ 0.445542] e820: reserve RAM buffer [mem 0xbf15b000-0xbfffffff]
[ 0.445543] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.445544] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.445636] NetLabel: Initializing
[ 0.445637] NetLabel: domain hash size = 128
[ 0.445638] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.445647] NetLabel: unlabeled traffic allowed by default
[ 0.445664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.445666] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.447711] Switched to clocksource hpet
[ 0.453281] pnp: PnP ACPI init
[ 0.453370] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.453373] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.453631] system 00:01: [io 0x040b] has been reserved
[ 0.453633] system 00:01: [io 0x04d6] has been reserved
[ 0.453634] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.453636] system 00:01: [io 0x0c14] has been reserved
[ 0.453638] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.453639] system 00:01: [io 0x0c52] has been reserved
[ 0.453641] system 00:01: [io 0x0c6c] has been reserved
[ 0.453642] system 00:01: [io 0x0c6f] has been reserved
[ 0.453644] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.453646] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.453647] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.453649] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.453650] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.453652] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.453654] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.453655] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.453657] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.453659] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.453661] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.453663] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.453665] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.453667] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.453669] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.453671] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.453673] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.453675] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.453821] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.453823] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.453825] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.453827] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454077] pnp 00:03: [dma 0 disabled]
[ 0.454116] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.454146] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.454202] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.454205] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454242] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454375] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.454377] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454493] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.454495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.454597] pnp: PnP ACPI: found 9 devices
[ 0.461181] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.461184] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.461186] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.461189] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461192] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.461194] pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 0.461198] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.461199] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.461202] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.461205] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.461207] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.461211] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.461217] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.461219] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.461221] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.461222] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.461224] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461225] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461227] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461228] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.461230] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.461231] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.461233] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[ 0.461234] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.461236] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.461237] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.461239] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.461240] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.461241] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.461243] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.461244] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.461246] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.461247] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.461248] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.461266] NET: Registered protocol family 2
[ 0.461445] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.461541] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.461669] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.461704] TCP: reno registered
[ 0.461711] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.461786] NET: Registered protocol family 1
[ 0.771487] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.771739] PCI: CLS 64 bytes, default 64
[ 0.771777] Unpacking initramfs...
[ 0.818296] Freeing initrd memory: 4096K (ffff8800377f0000 - ffff880037bf0000)
[ 0.818928] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.818930] AMD-Vi: Interrupt remapping enabled
[ 0.819044] AMD-Vi: Initialized for Passthrough Mode
[ 0.894098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894100] software IO TLB [mem 0xba858000-0xbe858000] (64MB) mapped at [ffff8800ba858000-ffff8800be857fff]
[ 0.894417] perf: AMD NB counters detected
[ 0.894473] microcode: CPU0: patch_level=0x06000822
[ 0.894480] microcode: CPU1: patch_level=0x06000822
[ 0.894489] microcode: CPU2: patch_level=0x06000822
[ 0.894497] microcode: CPU3: patch_level=0x06000822
[ 0.894505] microcode: CPU4: patch_level=0x06000822
[ 0.894512] microcode: CPU5: patch_level=0x06000822
[ 0.894520] microcode: CPU6: patch_level=0x06000822
[ 0.894528] microcode: CPU7: patch_level=0x06000822
[ 0.894571] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.894574] LVT offset 0 assigned for vector 0x400
[ 0.894593] perf: AMD IBS detected (0x000000ff)
[ 0.894612] Scanning for low memory corruption every 60 seconds
[ 0.894922] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.894967] Initialise system trusted keyring
[ 0.895290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896718] zpool: loaded
[ 0.896720] zbud: loaded
[ 0.896855] VFS: Disk quotas dquot_6.5.2
[ 0.896887] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.897041] Key type big_key registered
[ 0.897219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897278] io scheduler noop registered
[ 0.897280] io scheduler deadline registered
[ 0.897311] io scheduler cfq registered (default)
[ 0.897582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.897597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.897611] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.897612] vesafb: scrolling: redraw
[ 0.897613] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.897630] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
[ 0.908558] Console: switching to colour frame buffer device 160x64
[ 0.919363] fb0: VESA VGA frame buffer device
[ 0.919406] GHES: HEST is not enabled!
[ 0.919477] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.939995] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.940350] Linux agpgart interface v0.103
[ 0.940412] rtc_cmos 00:04: RTC can wake from S4
[ 0.940505] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.940526] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.940538] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.940741] TCP: cubic registered
[ 0.940831] NET: Registered protocol family 10
[ 0.941040] NET: Registered protocol family 17
[ 0.941657] Loading compiled-in X.509 certificates
[ 0.941667] registered taskstats version 1
[ 0.942038] Magic number: 11:895:492
[ 0.942102] rtc_cmos 00:04: setting system clock to 2015-04-01 18:28:16 UTC (1427912896)
[ 0.942169] PM: Hibernation image not present or could not be loaded.
[ 0.942657] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.942658] Write protecting the kernel read-only data: 8192k
[ 0.943029] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.943194] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.948897] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.960384] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.960767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.965753] ACPI: bus type USB registered
[ 0.965786] usbcore: registered new interface driver usbfs
[ 0.965799] usbcore: registered new interface driver hub
[ 0.965834] SCSI subsystem initialized
[ 0.965866] usbcore: registered new device driver usb
[ 0.966937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.967199] QUIRK: Enable AMD PLL fix
[ 0.967214] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967216] ehci-pci: EHCI PCI platform driver
[ 0.967220] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.967486] hub 1-0:1.0: USB hub found
[ 0.967493] hub 1-0:1.0: 1 port detected
[ 0.967607] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.967610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.967627] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.967789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.967791] libata version 3.00 loaded.
[ 0.967804] hub 2-0:1.0: USB hub found
[ 0.967816] hub 2-0:1.0: 4 ports detected
[ 0.967981] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 0.967988] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.967999] ehci-pci 0000:00:12.2: debug port 1
[ 0.968051] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[ 0.968187] ohci-pci: OHCI PCI platform driver
[ 0.978101] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.978260] hub 3-0:1.0: USB hub found
[ 0.978266] hub 3-0:1.0: 5 ports detected
[ 0.978471] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.978476] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.978478] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.978487] ehci-pci 0000:00:13.2: debug port 1
[ 0.978508] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
[ 0.988131] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.988272] hub 4-0:1.0: USB hub found
[ 0.988277] hub 4-0:1.0: 5 ports detected
[ 0.988478] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.988483] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 0.988485] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.988493] ehci-pci 0000:00:16.2: debug port 1
[ 0.988514] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
[ 0.998136] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.998291] hub 5-0:1.0: USB hub found
[ 0.998297] hub 5-0:1.0: 4 ports detected
[ 0.998517] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.998523] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 0.998580] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
[ 1.028176] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.055675] hub 6-0:1.0: USB hub found
[ 1.055685] hub 6-0:1.0: 5 ports detected
[ 1.055891] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.055896] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.055912] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
[ 1.112371] hub 7-0:1.0: USB hub found
[ 1.112380] hub 7-0:1.0: 5 ports detected
[ 1.112585] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.112589] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.112604] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
[ 1.169060] hub 8-0:1.0: USB hub found
[ 1.169069] hub 8-0:1.0: 2 ports detected
[ 1.169230] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.169234] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.169248] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
[ 1.225793] hub 9-0:1.0: USB hub found
[ 1.225802] hub 9-0:1.0: 4 ports detected
[ 1.226758] scsi host0: pata_atiixp
[ 1.226866] scsi host1: pata_atiixp
[ 1.226908] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.226910] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.226935] ahci 0000:00:11.0: version 3.0
[ 1.227077] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.227079] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.227581] scsi host2: ahci
[ 1.227687] scsi host3: ahci
[ 1.227790] scsi host4: ahci
[ 1.227894] scsi host5: ahci
[ 1.227941] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[ 1.227943] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[ 1.227945] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[ 1.227947] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[ 1.228069] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.228071] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.228368] scsi host6: ahci
[ 1.228467] scsi host7: ahci
[ 1.228518] ata7: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210100 irq 32
[ 1.228520] ata8: SATA max UDMA/133 abar m512@0xfe210000 port 0xfe210180 irq 32
[ 1.271654] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.389601] ata1.00: supports DRM functions and may not be fully accessible
[ 1.389604] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
[ 1.389606] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.390019] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.395403] ata1.00: supports DRM functions and may not be fully accessible
[ 1.395767] ata1.00: configured for UDMA/33
[ 1.395882] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 1.403230] hub 1-1:1.0: USB hub found
[ 1.403326] hub 1-1:1.0: 4 ports detected
[ 1.528533] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e550700d0d00, S400
[ 1.531822] usb 6-2: new full-speed USB device number 2 using ohci-pci
[ 1.541816] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.541830] usb 7-4: new full-speed USB device number 2 using ohci-pci
[ 1.548468] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.700539] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.705803] usbcore: registered new interface driver usbhid
[ 1.705804] usbhid: USB HID core driver
[ 1.707736] input: Turtle Beach Turtle Beach PX21 Headset as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.3/0003:10F5:0235.0001/input/input2
[ 1.711930] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711950] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.711968] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.711986] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.714459] ata5.00: ATAPI: ATAPI iHAS424 B, GL14, max UDMA/100
[ 1.715245] ata5.00: configured for UDMA/100
[ 1.724780] ata6.00: ATAPI: ATAPI DVD A DH16A3L, 8H1F, max UDMA/100
[ 1.727806] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-4/input2
[ 1.738060] ata6.00: configured for UDMA/100
[ 1.738990] ata4.00: ATA-8: ST3750528AS, CC44, max UDMA/133
[ 1.738992] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.752852] ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 1.752855] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.758678] hid-generic 0003:10F5:0235.0001: input,hidraw1: USB HID v1.00 Device [Turtle Beach Turtle Beach PX21 Headset] on usb-0000:00:12.0-2/input3
[ 1.778584] ata4.00: configured for UDMA/133
[ 1.811234] ata3.00: configured for UDMA/133
[ 1.811298] scsi 2:0:0:0: Direct-Access ATA ST3250620AS E PQ: 0 ANSI: 5
[ 1.811508] scsi 3:0:0:0: Direct-Access ATA ST3750528AS CC44 PQ: 0 ANSI: 5
[ 1.815331] scsi 4:0:0:0: CD-ROM ATAPI iHAS424 B GL14 PQ: 0 ANSI: 5
[ 1.827195] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH16A3L 8H1F PQ: 0 ANSI: 5
[ 1.838181] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.838236] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.838264] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.838266] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.838275] sd 0:0:0:0: [sda] Write Protect is off
[ 1.838279] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.838281] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.838307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.838310] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.838312] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.838324] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.840319] sda: sda1 sda2
[ 1.840687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.851264] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.851267] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.851394] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.853588] sdc: sdc1 sdc2 sdc3 sdc4
[ 1.853870] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.859267] sdb: sdb1 sdb2
[ 1.859479] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.864173] sr 5:0:0:0: [sr1] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.864316] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 1.895367] tsc: Refined TSC clocksource calibration: 4018.371 MHz
[ 1.972095] usb 7-5: new full-speed USB device number 3 using ohci-pci
[ 2.143199] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0006/input/input3
[ 2.143245] hid-generic 0003:1532:0016.0006: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 2.345643] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.564353] random: nonblocking pool is initialized
[ 2.896115] Switched to clocksource tsc
[ 2.989972] systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
[ 4.146364] EXT4-fs (sdc2): re-mounted. Opts: data=ordered
[ 5.242062] systemd-journald[198]: Received request to flush runtime journal from PID 1
[ 5.820530] ACPI: acpi_idle registered with cpuidle
[ 5.827968] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.088745] MCE: In-kernel MCE decoding enabled.
[ 6.088830] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.088835] ACPI: Power Button [PWRB]
[ 6.088901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.088903] ACPI: Power Button [PWRF]
[ 6.090720] wmi: Mapper loaded
[ 6.183901] EDAC MC: Ver: 3.0.0
[ 6.185457] AMD64 EDAC driver v3.4.0
[ 6.185490] EDAC amd64: DRAM ECC disabled.
[ 6.185502] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.196328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.252091] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.252149] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.309452] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.309546] r8169 0000:04:06.0 (unnamed net_device) (uninitialized): not PCI Express
[ 6.309823] r8169 0000:04:06.0 eth0: RTL8169sb/8110sb at 0xffffc90000648000, d8:eb:97:81:7b:88, XID 10000000 IRQ 20
[ 6.309826] r8169 0000:04:06.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 6.316117] [drm] Initialized drm 1.1.0 20060810
[ 6.322842] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.322904] sp5100_tco: PCI Revision ID: 0x42
[ 6.322936] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.322947] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.322994] sp5100_tco: initialized (0xffffc9000064ab00). heartbeat=60 sec (nowayout=0)
[ 6.370784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.405509] r8169 0000:04:06.0 enp4s6: renamed from eth0
[ 6.666521] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 6.666531] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.728492] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.728504] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.728512] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.728518] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.728523] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.728528] sound hdaudioC0D0: inputs:
[ 6.728534] sound hdaudioC0D0: Front Mic=0x19
[ 6.728540] sound hdaudioC0D0: Rear Mic=0x18
[ 6.728545] sound hdaudioC0D0: Line=0x1a
[ 6.732452] AVX version of gcm_enc/dec engaged.
[ 6.732455] AES CTR mode by8 optimization enabled
[ 6.751090] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 6.751373] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 6.751805] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 6.752652] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 6.752768] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 6.752834] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 6.752899] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 6.752956] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 7.043010] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.043204] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 7.043899] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 7.094444] Adding 16777212k swap on /dev/sdc3. Priority:-1 extents:1 across:16777212k FS
[ 7.117737] usbcore: registered new interface driver snd-usb-audio
[ 7.126713] nvidia: module license 'NVIDIA' taints kernel.
[ 7.126718] Disabling lock debugging due to kernel taint
[ 7.138096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.138428] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 7.138435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.47 Thu Feb 19 18:56:03 PST 2015
[ 7.485021] input: Logitech K400 as /devices/pci0000:00/0000:00:13.0/usb7/7-4/7-4:1.2/0003:046D:C52B.0004/0003:046D:4024.0005/input/input18
[ 7.485233] logitech-hidpp-device 0003:046D:4024.0005: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:13.0-4:1
[ 7.540890] mousedev: PS/2 mouse device common for all mice
[ 7.683577] kvm: Nested Virtualization enabled
[ 7.683587] kvm: Nested Paging enabled
[ 8.915498] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.970005] microcode: CPU0: new patch_level=0x06000832
[ 8.988739] microcode: CPU2: new patch_level=0x06000832
[ 8.994855] microcode: CPU4: new patch_level=0x06000832
[ 9.013677] microcode: CPU6: new patch_level=0x06000832
[ 9.123268] it87: Found IT8728F chip at 0x228, revision 1
[ 9.123288] it87: Beeping is supported
[ 10.039941] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0007/input/input19
[ 10.040305] hid-generic 0003:1532:0016.0007: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 10.361662] r8169 0000:04:06.0 enp4s6: link down
[ 10.361761] r8169 0000:04:06.0 enp4s6: link down
[ 10.701964] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.041655] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0008/input/input20
[ 11.042019] hid-generic 0003:1532:0016.0008: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 12.042896] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/0003:1532:0016.0009/input/input21
[ 12.043111] hid-generic 0003:1532:0016.0009: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:13.0-5/input0
[ 13.308991] NVRM: Your system is not currently configured to drive a VGA console
[ 13.308995] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 13.308996] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 13.308998] NVRM: drivers including, but not limited to, vesafb, may result in
[ 13.308999] NVRM: corruption and stability problems, and is not supported.
[ 13.823977] r8169 0000:04:06.0 enp4s6: link up
I figure there is plenty of unnecessary info in the dmesg and I apologize, but I want to find the problem of this illusive RAM.
My system specs:
AMD FX-8350
4x4gb CMZ8GX3M2A160 Corsair RAM
Gigabyte GA-990FXA-UD3
NVidia GT 640
Please can someone guide me to the answer of the missing RAM?
Last edited by vuvffufg (2015-04-02 18:37:31)

Yes it is 64bit:
[vuvffufg@HereAndNow-Main ~]$ uname -a
Linux HereAndNow-Main 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64 GNU/Linux

Laptop screen does not turn on after resume from suspend/hibernate

I use systemctl suspend/hibernate to resume, but the screen does not turn on from resume. everything else still functions just fine, meaning i can type in reboot and reboot, but a "turned off" black screen.
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 12h Processor Root Port
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 13)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 2)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-1-ARCH (builduser@tobias) (gcc version 4.9.2 20150204 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 07:08:20 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] tseg: 009ff00000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009f8f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8f5000-0x000000009f939fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f93a000-0x000000009f951fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009f952000-0x000000009f954fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f955000-0x000000009f955fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f956000-0x000000009f96cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f96d000-0x000000009f974fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f975000-0x000000009f9a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9a5000-0x000000009f9a5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9a6000-0x000000009f9b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f9b6000-0x000000009f9c3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9c4000-0x000000009f9c5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f9c6000-0x000000009f9ccfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009f9cd000-0x000000009fa02fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fa03000-0x000000009fc05fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fc06000-0x000000009fd78fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fd79000-0x000000009fef5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fef6000-0x000000009fefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: TOSHIBA Satellite L775D/TKBSS, BIOS 1.40 07/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF00000000 write-back
[ 0.000000] 1 base 009FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00A0000000 mask FFE0000000 uncachable
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0x9ff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9ff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf30-0x000fcf3f] mapped at [ffff8800000fcf30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23edfffff]
[ 0.000000] [mem 0x220000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
[ 0.000000] [mem 0x9f800000-0x9f8f4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f955000-0x9f955fff]
[ 0.000000] [mem 0x9f955000-0x9f955fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] [mem 0x9f9a6000-0x9f9b5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] [mem 0x9fc06000-0x9fd78fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] [mem 0x9fef6000-0x9fefffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37652000-0x37b20fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 TOSASU)
[ 0.000000] ACPI: XSDT 0x000000009F93A070 000064 (v01 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009F94E438 0000F4 (v04 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x000000009F93A168 0142CF (v02 TOSASU TOSASU00 00000140 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009F9C6F80 000040
[ 0.000000] ACPI: APIC 0x000000009F94E530 000072 (v03 TOSASU TOSASU00 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000009F94E5A8 0000C1 (v01 TOSASU TOSASU00 01072009 AMI. 00000004)
[ 0.000000] ACPI: SLIC 0x000000009F94E670 000176 (v01 TOSASU TOSASU00 01072009 MSFT 00000001)
[ 0.000000] ACPI: MCFG 0x000000009F94E7E8 00003C (v01 A M I GMCH945. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009F94E828 000038 (v01 TOSASU TOSASU00 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 0x000000009F94E860 000E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009F94F698 00193D (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23eff8000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x9f8f4fff]
[ 0.000000] node 0: [mem 0x9f955000-0x9f955fff]
[ 0.000000] node 0: [mem 0x9f9a6000-0x9f9b5fff]
[ 0.000000] node 0: [mem 0x9fc06000-0x9fd78fff]
[ 0.000000] node 0: [mem 0x9fef6000-0x9fefffff]
[ 0.000000] node 0: [mem 0x100001000-0x23effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1960479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10155 pages used for memmap
[ 0.000000] DMA32 zone: 649859 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306623 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f8f5000-0x9f939fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f93a000-0x9f951fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f952000-0x9f954fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f956000-0x9f96cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f96d000-0x9f974fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f975000-0x9f9a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9a5000-0x9f9a5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9b6000-0x9f9c3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c4000-0x9f9c5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9c6000-0x9f9ccfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f9cd000-0x9fa02fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa03000-0x9fc05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fd79000-0x9fef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9ff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023ec00000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929823
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70f3d39a-cd3c-4127-84d2-9af3430201ab rw quiet rootfstype=xfs i8042.nomux=1 i8042.reset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7635708K/7841916K available (5531K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 206208K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.380 MHz processor
[ 0.000043] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.20 BogoMIPS (lpj=4657933)
[ 0.000046] pid_max: default: 32768 minimum: 301
[ 0.000053] ACPI: Core revision 20141107
[ 0.000055] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.000123] ACPI: Forced DSDT copy: length 0x142CF copied locally, original unmapped
[ 0.015021] ACPI: All ACPI Tables successfully acquired
[ 0.016280] Security Framework initialized
[ 0.016286] Yama: becoming mindful.
[ 0.016907] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.019182] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.020189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020201] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.020472] Initializing cgroup subsys memory
[ 0.020479] Initializing cgroup subsys devices
[ 0.020482] Initializing cgroup subsys freezer
[ 0.020484] Initializing cgroup subsys net_cls
[ 0.020487] Initializing cgroup subsys blkio
[ 0.020510] CPU: Physical Processor ID: 0
[ 0.020511] CPU: Processor Core ID: 0
[ 0.020513] mce: CPU supports 6 MCE banks
[ 0.020522] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
[ 0.020644] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.021880] ftrace: allocating 21166 entries in 83 pages
[ 0.035456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068473] smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (fam: 12, model: 01, stepping: 00)
[ 0.174081] Performance Events: AMD PMU driver.
[ 0.174086] ... version: 0
[ 0.174087] ... bit width: 48
[ 0.174088] ... generic registers: 4
[ 0.174089] ... value mask: 0000ffffffffffff
[ 0.174090] ... max period: 00007fffffffffff
[ 0.174091] ... fixed-purpose events: 0
[ 0.174092] ... event mask: 000000000000000f
[ 0.191034] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.197738] x86: Booting SMP configuration:
[ 0.197744] .... node #0, CPUs: #1 #2 #3
[ 0.250891] x86: Booted up 1 node, 4 CPUs
[ 0.250896] smpboot: Total of 4 processors activated (11183.83 BogoMIPS)
[ 0.252264] devtmpfs: initialized
[ 0.257696] PM: Registering ACPI NVS region [mem 0x9f8f5000-0x9f939fff] (282624 bytes)
[ 0.257715] PM: Registering ACPI NVS region [mem 0x9f952000-0x9f954fff] (12288 bytes)
[ 0.257718] PM: Registering ACPI NVS region [mem 0x9f96d000-0x9f974fff] (32768 bytes)
[ 0.257721] PM: Registering ACPI NVS region [mem 0x9f9a5000-0x9f9a5fff] (4096 bytes)
[ 0.257724] PM: Registering ACPI NVS region [mem 0x9f9b6000-0x9f9c3fff] (57344 bytes)
[ 0.257727] PM: Registering ACPI NVS region [mem 0x9f9c6000-0x9f9ccfff] (28672 bytes)
[ 0.257729] PM: Registering ACPI NVS region [mem 0x9fa03000-0x9fc05fff] (2109440 bytes)
[ 0.258125] pinctrl core: initialized pinctrl subsystem
[ 0.258173] RTC time: 18:50:52, date: 02/22/15
[ 0.258343] NET: Registered protocol family 16
[ 0.270952] cpuidle: using governor ladder
[ 0.284279] cpuidle: using governor menu
[ 0.284490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.284493] ACPI: bus type PCI registered
[ 0.284495] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.284605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284608] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.285035] PCI: Using configuration type 1 for base access
[ 0.299021] ACPI: Added _OSI(Module Device)
[ 0.299025] ACPI: Added _OSI(Processor Device)
[ 0.299027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299029] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300870] ACPI : EC: EC description table is found, configuring boot EC
[ 0.302900] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.831121] ACPI: Interpreter enabled
[ 0.831132] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.831140] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.831167] ACPI: (supports S0 S3 S4 S5)
[ 0.831169] ACPI: Using IOAPIC for interrupt routing
[ 0.831382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.842727] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.842738] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.843157] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.843782] PCI host bridge to bus 0000:00
[ 0.843788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.843792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.843796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.843800] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.843803] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.843806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.843810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.843813] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.843825] pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
[ 0.843978] pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
[ 0.843993] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.844002] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
[ 0.844011] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.844070] pci 0000:00:01.0: supports D1 D2
[ 0.844185] pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
[ 0.844197] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
[ 0.844272] pci 0000:00:01.1: supports D1 D2
[ 0.844388] pci 0000:00:02.0: [1022:1707] type 01 class 0x060400
[ 0.844483] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.844641] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.844665] pci 0000:00:11.0: reg 0x10: [io 0xf190-0xf197]
[ 0.844678] pci 0000:00:11.0: reg 0x14: [io 0xf180-0xf183]
[ 0.844690] pci 0000:00:11.0: reg 0x18: [io 0xf170-0xf177]
[ 0.844703] pci 0000:00:11.0: reg 0x1c: [io 0xf160-0xf163]
[ 0.844715] pci 0000:00:11.0: reg 0x20: [io 0xf150-0xf15f]
[ 0.844728] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4e000-0xfeb4e7ff]
[ 0.844896] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.844914] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.845044] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.845114] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.845138] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.845242] pci 0000:00:12.2: supports D1 D2
[ 0.845245] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.845313] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.845383] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.845400] pci 0000:00:13.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff]
[ 0.845529] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.845599] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.845623] pci 0000:00:13.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff]
[ 0.845727] pci 0000:00:13.2: supports D1 D2
[ 0.845730] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.845799] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.845867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.846051] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[ 0.846069] pci 0000:00:14.1: reg 0x10: [io 0xf140-0xf147]
[ 0.846081] pci 0000:00:14.1: reg 0x14: [io 0xf130-0xf133]
[ 0.846094] pci 0000:00:14.1: reg 0x18: [io 0xf120-0xf127]
[ 0.846107] pci 0000:00:14.1: reg 0x1c: [io 0xf110-0xf113]
[ 0.846119] pci 0000:00:14.1: reg 0x20: [io 0xf100-0xf10f]
[ 0.846145] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.846148] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.846151] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.846154] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.846275] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.846303] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.846387] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.846454] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.846515] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.846704] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.846806] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.846879] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.846982] pci 0000:00:15.0: supports D1 D2
[ 0.847053] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.847122] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.847225] pci 0000:00:15.1: supports D1 D2
[ 0.847296] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.847363] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.847466] pci 0000:00:15.2: supports D1 D2
[ 0.847537] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.847610] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.847628] pci 0000:00:16.0: reg 0x10: [mem 0xfeb49000-0xfeb49fff]
[ 0.847757] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.847827] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.847851] pci 0000:00:16.2: reg 0x10: [mem 0xfeb48000-0xfeb480ff]
[ 0.847956] pci 0000:00:16.2: supports D1 D2
[ 0.847959] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.848026] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.848093] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.848228] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.848359] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.848490] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.848632] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.848762] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.848892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.849021] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.849252] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.849360] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.849372] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.849376] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.849379] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.849383] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.849387] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.849390] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.849394] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.849483] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.849617] pci 0000:04:00.0: [10ec:8176] type 00 class 0x028000
[ 0.849646] pci 0000:04:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.849687] pci 0000:04:00.0: reg 0x18: [mem 0xfea00000-0xfea03fff 64bit]
[ 0.849834] pci 0000:04:00.0: supports D1 D2
[ 0.849837] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.849878] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.854467] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.854488] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.854499] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.854661] pci 0000:05:00.0: [10ec:8136] type 00 class 0x020000
[ 0.854688] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.854722] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.854743] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.854860] pci 0000:05:00.0: supports D1 D2
[ 0.854863] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854907] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.861144] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.861165] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.861180] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.861237] acpi PNP0A03:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.861791] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 0.861823] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 0.861855] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 0.861887] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 0.861918] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 0.861951] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 0.861981] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 0.862011] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 0.862041] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 0.862071] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 0.862101] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 0.862130] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 0.862160] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 0.862190] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 0.862219] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 0.862249] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 0.862279] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 0.862309] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 0.862338] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 0.862368] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 0.862398] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 0.862428] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 0.862457] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 0.862487] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 0.862517] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 0.862546] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 0.862576] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 0.862606] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 0.862635] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 0.862665] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 0.862695] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 0.862726] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 0.862781] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862883] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.862986] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863084] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863164] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863228] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863292] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.863356] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.864141] ACPI : EC: GPE = 0xc, I/O: command/status = 0x66, data = 0x62
[ 0.864446] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.864452] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864464] vgaarb: loaded
[ 0.864466] vgaarb: bridge control possible 0000:00:01.0
[ 0.864788] PCI: Using ACPI for IRQ routing
[ 0.874741] PCI: pci_cache_line_size set to 64 bytes
[ 0.874840] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.874844] e820: reserve RAM buffer [mem 0x9f8f5000-0x9fffffff]
[ 0.874848] e820: reserve RAM buffer [mem 0x9f956000-0x9fffffff]
[ 0.874851] e820: reserve RAM buffer [mem 0x9f9b6000-0x9fffffff]
[ 0.874854] e820: reserve RAM buffer [mem 0x9fd79000-0x9fffffff]
[ 0.874856] e820: reserve RAM buffer [mem 0x9ff00000-0x9fffffff]
[ 0.874859] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.875079] NetLabel: Initializing
[ 0.875081] NetLabel: domain hash size = 128
[ 0.875083] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.875101] NetLabel: unlabeled traffic allowed by default
[ 0.875143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.875149] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.877246] Switched to clocksource hpet
[ 0.884868] pnp: PnP ACPI init
[ 0.885072] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.885079] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.886017] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.886021] system 00:01: [io 0x040b] has been reserved
[ 0.886025] system 00:01: [io 0x04d6] has been reserved
[ 0.886029] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.886032] system 00:01: [io 0x0c14] has been reserved
[ 0.886036] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.886039] system 00:01: [io 0x0c52] has been reserved
[ 0.886042] system 00:01: [io 0x0c6c] has been reserved
[ 0.886046] system 00:01: [io 0x0c6f] has been reserved
[ 0.886049] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.886052] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.886056] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.886059] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.886063] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.886067] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.886070] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.886074] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.886082] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.886086] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.886091] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.886096] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.886100] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.886104] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.886107] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.886112] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.886116] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.886120] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886180] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.886279] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.886283] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886420] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.886424] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.886523] pnp 00:06: Plug and Play ACPI device, IDs TOS0220 SYN1d00 SYN0002 PNP0f13 (active)
[ 0.886596] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.886784] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.887277] pnp: PnP ACPI: found 9 devices
[ 0.895955] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.895964] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.895969] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.896008] pci 0000:00:02.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.896012] pci 0000:00:02.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.896016] pci 0000:00:02.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.896026] pci 0000:00:02.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[ 0.896039] pci 0000:00:02.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896046] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.896051] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.896056] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.896061] pci 0000:00:02.0: bridge window [mem 0xd0100000-0xd02fffff]
[ 0.896067] pci 0000:00:02.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896073] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.896089] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.896103] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.896107] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.896114] pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.896124] pci 0000:00:15.2: PCI bridge to [bus 05]
[ 0.896129] pci 0000:00:15.2: bridge window [io 0xd000-0xdfff]
[ 0.896138] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896147] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.896151] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.896154] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.896157] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.896160] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896164] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896167] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896171] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896174] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[ 0.896178] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[ 0.896182] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
[ 0.896185] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
[ 0.896188] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
[ 0.896191] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
[ 0.896194] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.896198] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.896201] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.896205] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.896208] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.896212] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.896215] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.896259] NET: Registered protocol family 2
[ 0.896597] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.896863] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.897301] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.897360] TCP: reno registered
[ 0.897379] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897467] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.897618] NET: Registered protocol family 1
[ 0.897646] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.838171] PCI: CLS 64 bytes, default 64
[ 1.838242] Unpacking initramfs...
[ 1.934095] Freeing initrd memory: 4924K (ffff880037652000 - ffff880037b21000)
[ 1.934107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.934110] software IO TLB [mem 0x9b8f5000-0x9f8f5000] (64MB) mapped at [ffff88009b8f5000-ffff88009f8f4fff]
[ 1.934495] microcode: CPU0: patch_level=0x03000014
[ 1.934537] microcode: CPU1: patch_level=0x03000014
[ 1.934580] microcode: CPU2: patch_level=0x03000014
[ 1.934625] microcode: CPU3: patch_level=0x03000014
[ 1.934758] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.934766] LVT offset 0 assigned for vector 0x400
[ 1.934817] perf: AMD IBS detected (0x000000ff)
[ 1.934854] Scanning for low memory corruption every 60 seconds
[ 1.935293] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.935315] Initialise system trusted keyring
[ 1.935789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.937285] zpool: loaded
[ 1.937288] zbud: loaded
[ 1.937658] VFS: Disk quotas dquot_6.5.2
[ 1.937709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.937948] Key type big_key registered
[ 1.938436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.938508] io scheduler noop registered
[ 1.938511] io scheduler deadline registered
[ 1.938546] io scheduler cfq registered (default)
[ 1.939375] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.939380] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.939399] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.939403] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.939421] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 1.939423] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.939428] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 1.939447] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 1.939449] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.939453] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 1.939461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.939494] pciehp 0000:00:02.0:pcie04: Slot #2 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 1.939528] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 1.939533] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.939550] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 1.939552] vesafb: scrolling: redraw
[ 1.939554] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.939576] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 3904k, total 3904k
[ 1.955978] Console: switching to colour frame buffer device 144x54
[ 1.972261] fb0: VESA VGA frame buffer device
[ 1.972328] GHES: HEST is not enabled!
[ 1.972535] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.973720] Linux agpgart interface v0.103
[ 1.973797] rtc_cmos 00:02: RTC can wake from S4
[ 1.973936] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.973964] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.973983] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.974434] TCP: cubic registered
[ 1.974593] NET: Registered protocol family 10
[ 1.975020] NET: Registered protocol family 17
[ 1.975476] Loading compiled-in X.509 certificates
[ 1.975502] registered taskstats version 1
[ 1.976231] Magic number: 3:326:848
[ 1.976341] rtc_cmos 00:02: setting system clock to 2015-02-22 18:50:54 UTC (1424631054)
[ 1.976444] PM: Hibernation image not present or could not be loaded.
[ 1.977023] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 1.977027] Write protecting the kernel read-only data: 8192k
[ 1.977495] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 1.977718] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 1.979659] random: systemd urandom read with 1 bits of entropy available
[ 1.980307] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.980576] systemd[1]: Detected architecture 'x86-64'.
[ 1.980581] systemd[1]: Running in initial RAM disk.
[ 1.980590] systemd[1]: Running with unpopulated /etc.
[ 1.980603] systemd[1]: No hostname configured.
[ 1.980609] systemd[1]: Set hostname to <localhost>.
[ 1.980655] systemd[1]: Initializing machine ID from random generator.
[ 1.996373] systemd[1]: Populated /etc with preset unit settings.
[ 1.999327] systemd[1]: Unit type .busname is not supported on this system.
[ 2.003390] systemd[1]: Created slice -.slice.
[ 2.003412] systemd[1]: Starting -.slice.
[ 2.005054] systemd[1]: Listening on Journal Audit Socket.
[ 2.005188] systemd[1]: Created slice system.slice.
[ 2.005200] systemd[1]: Starting system.slice.
[ 2.005218] systemd[1]: Reached target Swap.
[ 2.005226] systemd[1]: Starting Swap.
[ 2.005288] systemd[1]: Listening on udev Control Socket.
[ 2.005296] systemd[1]: Starting udev Control Socket.
[ 2.005312] systemd[1]: Reached target Slices.
[ 2.005320] systemd[1]: Starting Slices.
[ 2.005335] systemd[1]: Reached target Local File Systems.
[ 2.005342] systemd[1]: Starting Local File Systems.
[ 2.005358] systemd[1]: Reached target Timers.
[ 2.005366] systemd[1]: Starting Timers.
[ 2.005398] systemd[1]: Listening on udev Kernel Socket.
[ 2.005409] systemd[1]: Starting udev Kernel Socket.
[ 2.005430] systemd[1]: Reached target Paths.
[ 2.005441] systemd[1]: Starting Paths.
[ 2.005497] systemd[1]: Listening on Journal Socket.
[ 2.005510] systemd[1]: Starting Journal Socket.
[ 2.006097] systemd[1]: Starting udev Coldplug all Devices...
[ 2.006689] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 2.006801] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.006811] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 2.006860] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.006870] systemd[1]: Starting Journal Socket (/dev/log).
[ 2.007428] systemd[1]: Starting Journal Service...
[ 2.007472] systemd[1]: Reached target Sockets.
[ 2.007494] systemd[1]: Starting Sockets.
[ 2.011399] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 2.012026] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.012842] systemd-journald[63]: Failed to set file attributes: Inappropriate ioctl for device
[ 2.016230] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.016999] systemd[1]: Starting udev Kernel Device Manager...
[ 2.021212] systemd[1]: Started udev Kernel Device Manager.
[ 2.024169] systemd[1]: Started udev Coldplug all Devices.
[ 2.029792] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.032026] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.032044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.041719] SCSI subsystem initialized
[ 2.042505] ACPI: bus type USB registered
[ 2.042538] usbcore: registered new interface driver usbfs
[ 2.042552] usbcore: registered new interface driver hub
[ 2.042588] usbcore: registered new device driver usb
[ 2.044174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.045154] systemd[1]: Started Journal Service.
[ 2.045633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.045840] ohci-pci: OHCI PCI platform driver
[ 2.045993] QUIRK: Enable AMD PLL fix
[ 2.046022] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.046033] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 2.046079] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4d000
[ 2.046697] ehci-pci: EHCI PCI platform driver
[ 2.047833] libata version 3.00 loaded.
[ 2.084196] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.102273] hub 1-0:1.0: USB hub found
[ 2.102287] hub 1-0:1.0: 5 ports detected
[ 2.102593] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.102600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 2.102631] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4b000
[ 2.159071] hub 2-0:1.0: USB hub found
[ 2.159085] hub 2-0:1.0: 5 ports detected
[ 2.160195] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.160202] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 3
[ 2.160235] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 2.215699] hub 3-0:1.0: USB hub found
[ 2.215713] hub 3-0:1.0: 4 ports detected
[ 2.271489] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.271502] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[ 2.271509] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.271523] ehci-pci 0000:00:12.2: debug port 1
[ 2.271574] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4c000
[ 2.281276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.281694] hub 4-0:1.0: USB hub found
[ 2.281705] hub 4-0:1.0: 5 ports detected
[ 2.338086] hub 1-0:1.0: USB hub found
[ 2.338100] hub 1-0:1.0: 5 ports detected
[ 2.338571] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.338579] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[ 2.338584] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.338596] ehci-pci 0000:00:13.2: debug port 1
[ 2.338634] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4a000
[ 2.347963] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.348396] hub 5-0:1.0: USB hub found
[ 2.348414] hub 5-0:1.0: 5 ports detected
[ 2.404806] hub 2-0:1.0: USB hub found
[ 2.404820] hub 2-0:1.0: 5 ports detected
[ 2.461536] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.461550] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 2.461557] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.461571] ehci-pci 0000:00:16.2: debug port 1
[ 2.461611] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 2.471331] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.471768] hub 6-0:1.0: USB hub found
[ 2.471780] hub 6-0:1.0: 4 ports detected
[ 2.528139] hub 3-0:1.0: USB hub found
[ 2.528154] hub 3-0:1.0: 4 ports detected
[ 2.528415] ahci 0000:00:11.0: version 3.0
[ 2.528689] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.528693] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.529180] scsi host0: ahci
[ 2.529664] scsi host1: ahci
[ 2.529777] ata1: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e100 irq 28
[ 2.529781] ata2: SATA max UDMA/133 abar m2048@0xfeb4e000 port 0xfeb4e180 irq 28
[ 2.530551] scsi host2: pata_atiixp
[ 2.530815] scsi host3: pata_atiixp
[ 2.530912] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[ 2.530914] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[ 2.654798] usb 5-4: new high-speed USB device number 2 using ehci-pci
[ 2.934859] tsc: Refined TSC clocksource calibration: 1397.458 MHz
[ 3.014908] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.014947] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.016183] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60B, max UDMA/133
[ 3.016190] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.016972] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633F, TF01, max UDMA/100
[ 3.017307] ata1.00: configured for UDMA/133
[ 3.017807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54755 A60B PQ: 0 ANSI: 5
[ 3.019278] ata2.00: configured for UDMA/100
[ 3.025787] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633F TF01 PQ: 0 ANSI: 5
[ 3.044649] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.044654] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.044859] sd 0:0:0:0: [sda] Write Protect is off
[ 3.044865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.044918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.061859] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.061874] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.062232] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.084075] sda: sda1 sda2 sda3
[ 3.085567] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.414041] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.528901] XFS (sda1): Mounting V4 Filesystem
[ 3.710527] XFS (sda1): Ending clean mount
[ 3.935255] Switched to clocksource tsc
[ 3.999076] systemd-journald[63]: Received SIGTERM from PID 1 (systemd).
[ 4.799287] random: nonblocking pool is initialized
[ 6.377516] systemd-journald[187]: Failed to set file attributes: Inappropriate ioctl for device
[ 7.417234] ACPI: acpi_idle registered with cpuidle
[ 7.464892] acpi-cpufreq: overriding BIOS provided _PSD data
[ 7.544509] wmi: Mapper loaded
[ 7.612504] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 7.626522] acpi device:2b: registered as cooling_device4
[ 7.626631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
[ 7.700708] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SMBX) (20141107/utaddress-258)
[ 7.700729] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.737166] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.737173] ACPI: Thermal Zone [THRM] (50 C)
[ 7.746486] ACPI: Lid Switch [LID]
[ 7.746714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.746725] ACPI: Power Button [SLPB]
[ 7.746874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.746880] ACPI: Power Button [PWRF]
[ 7.749494] ACPI: Battery Slot [BAT0] (battery present)
[ 7.749951] ACPI: AC Adapter [AC0] (on-line)
[ 7.755509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.961538] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.061752] [drm] Initialized drm 1.1.0 20060810
[ 8.296521] cfg80211: Calling CRDA to update world regulatory domain
[ 8.319199] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.319231] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.320035] r8169 0000:05:00.0 eth0: RTL8105e at 0xffffc90000032000, 38:60:77:69:8f:16, XID 00a00000 IRQ 29
[ 8.363138] kvm: Nested Virtualization enabled
[ 8.363151] kvm: Nested Paging enabled
[ 8.704039] [drm] radeon kernel modesetting enabled.
[ 8.794078] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 8.832358] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 8.832364] AMD IOMMUv2 functionality not available on this system
[ 8.959092] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 8.961187] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[ 8.965010] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 9.031523] media: Linux media interface: v0.10
[ 9.102014] CRAT table not found
[ 9.102024] Finished initializing topology ret=0
[ 9.102177] kfd kfd: Initialized module
[ 9.102941] checking generic (c0000000 3d0000) vs hw (c0000000 10000000)
[ 9.102951] fb: switching to radeondrmfb from VESA VGA
[ 9.103002] Console: switching to colour dummy device 80x25
[ 9.104030] [drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x1179:0xFC62).
[ 9.104059] [drm] register mmio base: 0xFEB00000
[ 9.104063] [drm] register mmio size: 262144
[ 9.104144] ATOM BIOS: Toshiba
[ 9.104219] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 9.104227] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 9.104231] [drm] Detected VRAM RAM=512M, BAR=256M
[ 9.104235] [drm] RAM width 32bits DDR
[ 9.104379] [TTM] Zone kernel: Available graphics memory: 3821360 kiB
[ 9.104390] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 9.104394] [TTM] Initializing pool allocator
[ 9.104407] [TTM] Initializing DMA pool allocator
[ 9.104455] [drm] radeon: 512M of VRAM memory ready
[ 9.104459] [drm] radeon: 1024M of GTT memory ready.
[ 9.104497] [drm] Loading SUMO Microcode
[ 9.124664] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 582762
[ 9.124685] psmouse serio1: synaptics: Toshiba Satellite L775D detected, limiting rate to 40pps.
[ 9.160285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.170455] Linux video capture interface: v2.00
[ 9.179293] mousedev: PS/2 mouse device common for all mice
[ 9.223473] [drm] Internal thermal controller without fan control
[ 9.223622] [drm] Found smc ucode version: 0x00011200
[ 9.223730] [drm] radeon: dpm initialized
[ 9.266919] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 9.282200] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 9.282345] radeon 0000:00:01.0: WB enabled
[ 9.282349] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88009b70ac00
[ 9.282351] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88009b70ac0c
[ 9.283078] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 9.283081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.283082] [drm] Driver supports precise vblank timestamp query.
[ 9.283084] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 9.283121] radeon 0000:00:01.0: radeon: using MSI.
[ 9.283145] [drm] radeon: irq initialized.
[ 9.298245] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.298931] rtlwifi: rtlwifi: wireless switch is on
[ 9.299718] [drm] ring test on 0 succeeded in 1 usecs
[ 9.299728] [drm] ring test on 3 succeeded in 3 usecs
[ 9.307045] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.307049] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.307053] sound hdaudioC0D2: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 9.307055] sound hdaudioC0D2: mono: mono_out=0x0
[ 9.307058] sound hdaudioC0D2: inputs:
[ 9.307061] sound hdaudioC0D2: Mic=0x18
[ 9.307065] sound hdaudioC0D2: Internal Mic=0x12
[ 9.315899] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D2/input9
[ 9.316387] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.316507] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.349814] [drm] ring test on 5 succeeded in 1 usecs
[ 9.369840] [drm] UVD initialized successfully.
[ 9.370279] [drm] ib test on ring 0 succeeded in 0 usecs
[ 9.370314] [drm] ib test on ring 3 succeeded in 0 usecs
[ 9.524205] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[ 9.769931] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - MP (04f2:b289)
[ 9.788893] input: TOSHIBA Web Camera - MP as /devices/pci0000:00/0000:00:13.2/usb5/5-4/5-4:1.0/input/input12
[ 9.789309] usbcore: registered new interface driver uvcvideo
[ 9.789319] USB Video Class driver (1.1.1)
[ 9.871399] cfg80211: World regulatory domain updated:
[ 9.871412] cfg80211: DFS Master region: unset
[ 9.871417] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9.871425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871431] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871436] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871441] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 9.871447] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 9.871453] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 9.871457] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 9.871463] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 9.890507] [drm] ib test on ring 5 succeeded
[ 9.911771] [drm] radeon atom DIG backlight initialized
[ 9.911776] [drm] Radeon Display Connectors
[ 9.911777] [drm] Connector 0:
[ 9.911779] [drm] VGA-1
[ 9.911780] [drm] HPD2
[ 9.911782] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 9.911783] [drm] Encoders:
[ 9.911784] [drm] CRT1: INTERNAL_UNIPHY2
[ 9.911786] [drm] CRT1: NUTMEG
[ 9.911787] [drm] Connector 1:
[ 9.911788] [drm] LVDS-1
[ 9.911789] [drm] HPD1
[ 9.911790] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 9.911791] [drm] Encoders:
[ 9.911792] [drm] LCD1: INTERNAL_UNIPHY2
[ 9.911793] [drm] LCD1: TRAVIS
[ 9.911794] [drm] Connector 2:
[ 9.911795] [drm] HDMI-A-1
[ 9.911796] [drm] HPD5
[ 9.911798] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 9.911799] [drm] Encoders:
[ 9.911800] [drm] DFP1: INTERNAL_UNIPHY1
[ 10.016569] [drm] fb mappable at 0xC0478000
[ 10.016576] [drm] vram apper at 0xC0000000
[ 10.016578] [drm] size 5787648
[ 10.016580] [drm] fb depth is 24
[ 10.016582] [drm] pitch is 6400
[ 10.016970] fbcon: radeondrmfb (fb0) is primary device
[ 10.078763] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 10.143532] Console: switching to colour frame buffer device 200x56
[ 10.150308] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 10.150312] radeon 0000:00:01.0: registered panic notifier
[ 10.164191] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 10.194853] cfg80211: Calling CRDA for country: US
[ 10.231380] cfg80211: Regulatory domain changed to country: US
[ 10.231393] cfg80211: DFS Master region: FCC
[ 10.231397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.231406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231413] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 10.231419] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 10.231425] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231429] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
[ 10.231434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 10.231439] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.422003] XFS (sda3): Mounting V5 Filesystem
[ 10.837256] XFS (sda3): Ending clean mount
[ 10.899226] systemd-journald[187]: Received request to flush runtime journal from PID 1
[ 11.195453] microcode: CPU0: new patch_level=0x03000027
[ 11.195496] microcode: CPU1: new patch_level=0x03000027
[ 11.195601] microcode: CPU2: new patch_level=0x03000027
[ 11.195693] microcode: CPU3: new patch_level=0x03000027
[ 12.465476] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 13.726328] wlp4s0: authenticate with 00:1e:2a:6f:46:f8
[ 13.745730] wlp4s0: send auth to 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.753012] wlp4s0: authenticated
[ 13.755130] wlp4s0: associate with 00:1e:2a:6f:46:f8 (try 1/3)
[ 13.758031] wlp4s0: RX AssocResp from 00:1e:2a:6f:46:f8 (capab=0x411 status=0 aid=3)
[ 13.758283] wlp4s0: associated
[ 13.758302] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 23.961417] PM: Syncing filesystems ... done.
[ 24.305227] PM: Preparing system for mem sleep
[ 24.310243] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 24.311535] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 24.311542] PM: Entering mem sleep
[ 24.311898] Suspending console(s) (use no_console_suspend to debug)
[ 24.320753] wlp4s0: deauthenticating f

Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Read only filesystem problem

Hi,
I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
If i tried to remount it read-write using command
mount -o remount,rw /
i got this:
sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
mount: /dev/mapper/VG0-archlinux2: can't read superblock
Only reboot helps.
my machine is (uname -a):
Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
/etc/mtab (when problem occured):
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
/dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
/dev/sda1 /boot ext2 rw,relatime 0 0
/dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
dmesg output is this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
[ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
[ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.003333] Fast TSC calibration using PIT
[ 0.006666] Detected 2813.035 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002140] Mount-cache hash table entries: 256
[ 0.002315] Initializing cgroup subsys cpuacct
[ 0.002317] Initializing cgroup subsys memory
[ 0.002326] Initializing cgroup subsys devices
[ 0.002327] Initializing cgroup subsys freezer
[ 0.002328] Initializing cgroup subsys net_cls
[ 0.002330] Initializing cgroup subsys blkio
[ 0.002349] tseg: 00cff00000
[ 0.002351] CPU: Physical Processor ID: 0
[ 0.002352] CPU: Processor Core ID: 0
[ 0.002353] mce: CPU supports 6 MCE banks
[ 0.002358] LVT offset 0 assigned for vector 0xf9
[ 0.002362] using AMD E400 aware idle routine
[ 0.002998] ACPI: Core revision 20120320
[ 0.019730] ftrace: allocating 17970 entries in 71 pages
[ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.165799] Performance Events: AMD PMU driver.
[ 0.165802] ... version: 0
[ 0.165803] ... bit width: 48
[ 0.165803] ... generic registers: 4
[ 0.165804] ... value mask: 0000ffffffffffff
[ 0.165805] ... max period: 00007fffffffffff
[ 0.165806] ... fixed-purpose events: 0
[ 0.165807] ... event mask: 000000000000000f
[ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.199154] Booting Node 0, Processors #1 #2
[ 0.235675] Brought up 3 CPUs
[ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
[ 0.239344] devtmpfs: initialized
[ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[ 0.241490] NET: Registered protocol family 16
[ 0.241574] node 0 link 0: io port [c000, ffff]
[ 0.241576] TOM: 00000000d0000000 aka 3328M
[ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.241580] node 0 link 0: mmio [a0000, bffff]
[ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.241588] TOM2: 0000000130000000 aka 4864M
[ 0.241589] bus: [00, 03] on node 0 link 0
[ 0.241590] bus: 00 [io 0x0000-0xffff]
[ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
[ 0.241649] ACPI: bus type pci registered
[ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.252350] PCI: Using configuration type 1 for base access
[ 0.252819] bio: create slab <bio-0> at 0
[ 0.252870] ACPI: Added _OSI(Module Device)
[ 0.252871] ACPI: Added _OSI(Processor Device)
[ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.253366] ACPI: EC: Look up EC in DSDT
[ 0.258796] ACPI: Interpreter enabled
[ 0.258802] ACPI: (supports S0 S3 S4 S5)
[ 0.258819] ACPI: Using IOAPIC for interrupt routing
[ 0.261632] ACPI: No dock devices found.
[ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.261768] PCI host bridge to bus 0000:00
[ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
[ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.262309] pci 0000:00:12.2: supports D1 D2
[ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.262590] pci 0000:00:13.2: supports D1 D2
[ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
[ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.269300] pci 0000:02:00.0: supports D1 D2
[ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
[ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
[ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
[ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
[ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
[ 0.276136] pci 0000:03:0e.0: supports D1 D2
[ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.283252] vgaarb: loaded
[ 0.283253] vgaarb: bridge control possible 0000:01:00.0
[ 0.283281] PCI: Using ACPI for IRQ routing
[ 0.291632] PCI: pci_cache_line_size set to 64 bytes
[ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[ 0.291778] NetLabel: Initializing
[ 0.291779] NetLabel: domain hash size = 128
[ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.291789] NetLabel: unlabeled traffic allowed by default
[ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.293841] Switching to clocksource hpet
[ 0.298189] pnp: PnP ACPI init
[ 0.298200] ACPI: bus type pnp registered
[ 0.298257] pnp 00:00: [bus 00-ff]
[ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.298303] pnp 00:01: [io 0x0010-0x001f]
[ 0.298304] pnp 00:01: [io 0x0022-0x003f]
[ 0.298306] pnp 00:01: [io 0x0044-0x005f]
[ 0.298307] pnp 00:01: [io 0x0062-0x0063]
[ 0.298308] pnp 00:01: [io 0x0065-0x006f]
[ 0.298310] pnp 00:01: [io 0x0074-0x007f]
[ 0.298311] pnp 00:01: [io 0x0091-0x0093]
[ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.298316] pnp 00:01: [io 0x0220-0x0225]
[ 0.298317] pnp 00:01: [io 0x0290-0x0294]
[ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298785] pnp 00:02: [io 0x4100-0x411f]
[ 0.298789] pnp 00:02: [io 0x0228-0x022f]
[ 0.298791] pnp 00:02: [io 0x040b]
[ 0.298792] pnp 00:02: [io 0x04d6]
[ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.298794] pnp 00:02: [io 0x0c14]
[ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.298798] pnp 00:02: [io 0x0c6f]
[ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
[ 0.298804] pnp 00:02: [io 0x4210-0x4217]
[ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.298889] system 00:02: [io 0x040b] has been reserved
[ 0.298891] system 00:02: [io 0x04d6] has been reserved
[ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.298894] system 00:02: [io 0x0c14] has been reserved
[ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.298899] system 00:02: [io 0x0c6f] has been reserved
[ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298986] pnp 00:03: [dma 4]
[ 0.298988] pnp 00:03: [io 0x0000-0x000f]
[ 0.298989] pnp 00:03: [io 0x0080-0x0090]
[ 0.298991] pnp 00:03: [io 0x0094-0x009f]
[ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
[ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.299038] pnp 00:04: [irq 0 disabled]
[ 0.299049] pnp 00:04: [irq 8]
[ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.299088] pnp 00:05: [io 0x0070-0x0073]
[ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.299114] pnp 00:06: [io 0x0061]
[ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.299147] pnp 00:07: [irq 13]
[ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.299272] pnp 00:08: [io 0x03f7]
[ 0.299279] pnp 00:08: [irq 6]
[ 0.299281] pnp 00:08: [dma 2]
[ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.299445] pnp 00:09: [irq 4]
[ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.299507] pnp 00:0a: [io 0x0060]
[ 0.299509] pnp 00:0a: [io 0x0064]
[ 0.299516] pnp 00:0a: [irq 1]
[ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
[ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
[ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
[ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
[ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.299768] pnp: PnP ACPI: found 13 devices
[ 0.299769] ACPI: ACPI bus type pnp unregistered
[ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
[ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.306249] NET: Registered protocol family 2
[ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.309859] TCP: reno registered
[ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.309974] NET: Registered protocol family 1
[ 0.710572] pci 0000:01:00.0: Boot video device
[ 0.710585] PCI: CLS 4 bytes, default 64
[ 0.710637] Unpacking initramfs...
[ 0.774193] Freeing initrd memory: 3700k freed
[ 0.776235] PCI-DMA: Disabling AGP.
[ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.776307] PCI-DMA: using GART IOMMU.
[ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.779581] LVT offset 1 assigned for vector 0x400
[ 0.779589] IBS: LVT offset 1 assigned
[ 0.779613] perf: AMD IBS detected (0x0000001f)
[ 0.779743] audit: initializing netlink socket (disabled)
[ 0.779753] type=2000 audit(1348861535.663:1): initialized
[ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.790783] VFS: Disk quotas dquot_6.5.2
[ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.790894] msgmni has been set to 7909
[ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.791075] io scheduler noop registered
[ 0.791076] io scheduler deadline registered
[ 0.791112] io scheduler cfq registered (default)
[ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.791449] GHES: HEST is not enabled!
[ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.833141] Linux agpgart interface v0.103
[ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.833378] mousedev: PS/2 mouse device common for all mice
[ 0.833425] rtc_cmos 00:05: RTC can wake from S4
[ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.833577] cpuidle: using governor ladder
[ 0.833578] cpuidle: using governor menu
[ 0.833689] drop_monitor: Initializing network drop monitor service
[ 0.833749] TCP: cubic registered
[ 0.833835] NET: Registered protocol family 10
[ 0.833965] NET: Registered protocol family 17
[ 0.833973] Key type dns_resolver registered
[ 0.834070] PM: Hibernation image not present or could not be loaded.
[ 0.834076] registered taskstats version 1
[ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
[ 0.835479] Freeing unused kernel memory: 760k freed
[ 0.835631] Write protecting the kernel read-only data: 8192k
[ 0.839453] Freeing unused kernel memory: 1488k freed
[ 0.841313] Freeing unused kernel memory: 612k freed
[ 0.848497] systemd-udevd[70]: starting version 189
[ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.861403] Floppy drive(s): fd0 is 1.44M
[ 0.868797] ACPI: bus type usb registered
[ 0.868817] usbcore: registered new interface driver usbfs
[ 0.868825] usbcore: registered new interface driver hub
[ 0.868995] usbcore: registered new device driver usb
[ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.869785] QUIRK: Enable AMD PLL fix
[ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
[ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.871224] SCSI subsystem initialized
[ 0.872843] libata version 3.00 loaded.
[ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.877278] hub 1-0:1.0: USB hub found
[ 0.877281] hub 1-0:1.0: 6 ports detected
[ 0.878035] FDC 0 is a post-1991 82077
[ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
[ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.887266] hub 2-0:1.0: USB hub found
[ 0.887269] hub 2-0:1.0: 6 ports detected
[ 0.887719] ahci 0000:00:11.0: version 3.0
[ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.888332] scsi0 : ahci
[ 0.888396] scsi1 : ahci
[ 0.888447] scsi2 : ahci
[ 0.888494] scsi3 : ahci
[ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.944618] hub 3-0:1.0: USB hub found
[ 0.944624] hub 3-0:1.0: 3 ports detected
[ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.001279] hub 4-0:1.0: USB hub found
[ 1.001285] hub 4-0:1.0: 3 ports detected
[ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.057932] hub 5-0:1.0: USB hub found
[ 1.057938] hub 5-0:1.0: 3 ports detected
[ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.114589] hub 6-0:1.0: USB hub found
[ 1.114595] hub 6-0:1.0: 3 ports detected
[ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.171271] hub 7-0:1.0: USB hub found
[ 1.171277] hub 7-0:1.0: 2 ports detected
[ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 1.373774] ata2: softreset failed (device not ready)
[ 1.373843] ata2: applying PMP SRST workaround and retrying
[ 1.373866] ata1: softreset failed (device not ready)
[ 1.373934] ata1: applying PMP SRST workaround and retrying
[ 1.425928] hub 2-4:1.0: USB hub found
[ 1.426276] hub 2-4:1.0: 4 ports detected
[ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
[ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.542034] ata1.00: configured for UDMA/133
[ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
[ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
[ 1.565919] ata2.00: configured for UDMA/100
[ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
[ 1.570090] scsi4 : pata_atiixp
[ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
[ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.571032] scsi5 : pata_atiixp
[ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.583928] sda: sda1 sda2 sda3 sda4
[ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
[ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
[ 1.780391] Switching to clocksource tsc
[ 1.850813] usbcore: registered new interface driver usbhid
[ 1.850814] usbhid: USB HID core driver
[ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
[ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
[ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
[ 1.925431] device-mapper: uevent: version 1.0.3
[ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
[ 2.294160] REISERFS (device dm-3): using ordered data mode
[ 2.294161] reiserfs: using flush barriers
[ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
[ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
[ 3.521243] systemd-udevd[196]: starting version 192
[ 3.731543] vboxdrv: Found 3 processor cores.
[ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
[ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
[ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.078340] ACPI: Power Button [PWRB]
[ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.078391] ACPI: Power Button [PWRF]
[ 4.118249] wmi: Mapper loaded
[ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
[ 4.266129] EDAC MC: Ver: 2.1.0
[ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
[ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
[ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.460371] MCE: In-kernel MCE decoding enabled.
[ 4.461269] AMD64 EDAC driver v3.4.0
[ 4.461326] EDAC amd64: DRAM ECC disabled.
[ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
[ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
[ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
[ 5.157960] kvm: Nested Virtualization enabled
[ 5.157964] kvm: Nested Paging enabled
[ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
[ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.445767] microcode: CPU0: patch_level=0x01000086
[ 5.513053] ath: EEPROM regdomain: 0x809c
[ 5.513060] ath: EEPROM indicates we should expect a country code
[ 5.513064] ath: doing EEPROM country->regdmn map search
[ 5.513067] ath: country maps to regdmn code: 0x52
[ 5.513070] ath: Country alpha2 being used: CN
[ 5.513073] ath: Regpair used: 0x52
[ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.720419] microcode: CPU1: patch_level=0x01000086
[ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.721373] microcode: CPU2: patch_level=0x01000086
[ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
[ 6.296714] Disabling lock debugging due to kernel taint
[ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
[ 6.321474] Linux media interface: v0.10
[ 6.384863] Linux video capture interface: v2.00
[ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
[ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
[ 6.469404] usbcore: registered new interface driver uvcvideo
[ 6.469407] USB Video Class driver (1.1.1)
[ 7.020908] usbcore: registered new interface driver snd-usb-audio
[ 7.051400] set resolution quirk: cval->res = 384
[ 8.232297] reiserfs: enabling write barrier flush mode
[ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
[ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
[ 11.462516] wlan0: authenticated
[ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
[ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
[ 11.471130] wlan0: associated
[ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
[ 27.419761] fuse init (API version 7.19)
[ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
[ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
[ 2088.845667] ata1: SError: { HostInt Handshk }
[ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845694] ata1.00: status: { DRDY }
[ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845716] ata1.00: status: { DRDY }
[ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845737] ata1.00: status: { DRDY }
[ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845758] ata1.00: status: { DRDY }
[ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845779] ata1.00: status: { DRDY }
[ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845800] ata1.00: status: { DRDY }
[ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845820] ata1.00: status: { DRDY }
[ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845841] ata1.00: status: { DRDY }
[ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845862] ata1.00: status: { DRDY }
[ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845883] ata1.00: status: { DRDY }
[ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845905] ata1.00: status: { DRDY }
[ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845927] ata1.00: status: { DRDY }
[ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845947] ata1.00: status: { DRDY }
[ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
[ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
[ 2088.845970] ata1.00: status: { DRDY }
[ 2088.845978] ata1: hard resetting link
[ 2089.329937] ata1: softreset failed (device not ready)
[ 2089.329948] ata1: applying PMP SRST workaround and retrying
[ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2089.498245] ata1.00: configured for UDMA/133
[ 2089.509941] sd 0:0:0:0: [sda]
[ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.509956] sd 0:0:0:0: [sda]
[ 2089.509959] Sense Key : 0xb [current] [descriptor]
[ 2089.509966] Descriptor sense data with sense descriptors (in hex):
[ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.509987] 1a 07 b2 c7
[ 2089.509996] sd 0:0:0:0: [sda]
[ 2089.509999] ASC=0x0 ASCQ=0x0
[ 2089.510004] sd 0:0:0:0: [sda] CDB:
[ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
[ 2089.510021] end_request: I/O error, dev sda, sector 436711063
[ 2089.510032] Buffer I/O error on device dm-3, logical block 631
[ 2089.510035] lost page write due to I/O error on dm-3
[ 2089.510058] sd 0:0:0:0: [sda]
[ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510066] sd 0:0:0:0: [sda]
[ 2089.510068] Sense Key : 0xb [current] [descriptor]
[ 2089.510073] Descriptor sense data with sense descriptors (in hex):
[ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510091] 1a 07 b2 c7
[ 2089.510099] sd 0:0:0:0: [sda]
[ 2089.510101] ASC=0x0 ASCQ=0x0
[ 2089.510106] sd 0:0:0:0: [sda] CDB:
[ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
[ 2089.510121] end_request: I/O error, dev sda, sector 436711095
[ 2089.510126] Buffer I/O error on device dm-3, logical block 635
[ 2089.510129] lost page write due to I/O error on dm-3
[ 2089.510140] sd 0:0:0:0: [sda]
[ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510146] sd 0:0:0:0: [sda]
[ 2089.510149] Sense Key : 0xb [current] [descriptor]
[ 2089.510153] Descriptor sense data with sense descriptors (in hex):
[ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510171] 1a 07 b2 c7
[ 2089.510178] sd 0:0:0:0: [sda]
[ 2089.510181] ASC=0x0 ASCQ=0x0
[ 2089.510185] sd 0:0:0:0: [sda] CDB:
[ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
[ 2089.510200] end_request: I/O error, dev sda, sector 436711103
[ 2089.510205] Buffer I/O error on device dm-3, logical block 636
[ 2089.510208] lost page write due to I/O error on dm-3
[ 2089.510212] Buffer I/O error on device dm-3, logical block 637
[ 2089.510215] lost page write due to I/O error on dm-3
[ 2089.510220] Buffer I/O error on device dm-3, logical block 638
[ 2089.510222] lost page write due to I/O error on dm-3
[ 2089.510227] Buffer I/O error on device dm-3, logical block 639
[ 2089.510230] lost page write due to I/O error on dm-3
[ 2089.510245] sd 0:0:0:0: [sda]
[ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510252] sd 0:0:0:0: [sda]
[ 2089.510254] Sense Key : 0xb [current] [descriptor]
[ 2089.510258] Descriptor sense data with sense descriptors (in hex):
[ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510276] 1a 07 b2 c7
[ 2089.510284] sd 0:0:0:0: [sda]
[ 2089.510286] ASC=0x0 ASCQ=0x0
[ 2089.510290] sd 0:0:0:0: [sda] CDB:
[ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
[ 2089.510305] end_request: I/O error, dev sda, sector 436711135
[ 2089.510310] Buffer I/O error on device dm-3, logical block 640
[ 2089.510313] lost page write due to I/O error on dm-3
[ 2089.510317] Buffer I/O error on device dm-3, logical block 641
[ 2089.510320] lost page write due to I/O error on dm-3
[ 2089.510325] Buffer I/O error on device dm-3, logical block 642
[ 2089.510327] lost page write due to I/O error on dm-3
[ 2089.510332] Buffer I/O error on device dm-3, logical block 643
[ 2089.510335] lost page write due to I/O error on dm-3
[ 2089.510400] sd 0:0:0:0: [sda]
[ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510407] sd 0:0:0:0: [sda]
[ 2089.510409] Sense Key : 0xb [current] [descriptor]
[ 2089.510414] Descriptor sense data with sense descriptors (in hex):
[ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510432] 1a 07 b2 c7
[ 2089.510440] sd 0:0:0:0: [sda]
[ 2089.510442] ASC=0x0 ASCQ=0x0
[ 2089.510446] sd 0:0:0:0: [sda] CDB:
[ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
[ 2089.510461] end_request: I/O error, dev sda, sector 436711335
[ 2089.510502] sd 0:0:0:0: [sda]
[ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510509] sd 0:0:0:0: [sda]
[ 2089.510511] Sense Key : 0xb [current] [descriptor]
[ 2089.510515] Descriptor sense data with sense descriptors (in hex):
[ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510533] 1a 07 b2 c7
[ 2089.510541] sd 0:0:0:0: [sda]
[ 2089.510543] ASC=0x0 ASCQ=0x0
[ 2089.510548] sd 0:0:0:0: [sda] CDB:
[ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
[ 2089.510563] end_request: I/O error, dev sda, sector 436711479
[ 2089.510610] sd 0:0:0:0: [sda]
[ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510617] sd 0:0:0:0: [sda]
[ 2089.510619] Sense Key : 0xb [current] [descriptor]
[ 2089.510623] Descriptor sense data with sense descriptors (in hex):
[ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510641] 1a 07 b2 c7
[ 2089.510649] sd 0:0:0:0: [sda]
[ 2089.510651] ASC=0x0 ASCQ=0x0
[ 2089.510656] sd 0:0:0:0: [sda] CDB:
[ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
[ 2089.510670] end_request: I/O error, dev sda, sector 436711663
[ 2089.510713] sd 0:0:0:0: [sda]
[ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510720] sd 0:0:0:0: [sda]
[ 2089.510722] Sense Key : 0xb [current] [descriptor]
[ 2089.510727] Descriptor sense data with sense descriptors (in hex):
[ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510744] 1a 07 b2 c7
[ 2089.510752] sd 0:0:0:0: [sda]
[ 2089.510754] ASC=0x0 ASCQ=0x0
[ 2089.510759] sd 0:0:0:0: [sda] CDB:
[ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
[ 2089.510774] end_request: I/O error, dev sda, sector 436711831
[ 2089.510812] sd 0:0:0:0: [sda]
[ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510819] sd 0:0:0:0: [sda]
[ 2089.510821] Sense Key : 0xb [current] [descriptor]
[ 2089.510825] Descriptor sense data with sense descriptors (in hex):
[ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510843] 1a 07 b2 c7
[ 2089.510851] sd 0:0:0:0: [sda]
[ 2089.510854] ASC=0x0 ASCQ=0x0
[ 2089.510858] sd 0:0:0:0: [sda] CDB:
[ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
[ 2089.510873] end_request: I/O error, dev sda, sector 436711959
[ 2089.510919] sd 0:0:0:0: [sda]
[ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.510926] sd 0:0:0:0: [sda]
[ 2089.510928] Sense Key : 0xb [current] [descriptor]
[ 2089.510933] Descriptor sense data with sense descriptors (in hex):
[ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.510951] 1a 07 b2 c7
[ 2089.510959] sd 0:0:0:0: [sda]
[ 2089.510961] ASC=0x0 ASCQ=0x0
[ 2089.510966] sd 0:0:0:0: [sda] CDB:
[ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
[ 2089.510980] end_request: I/O error, dev sda, sector 436712135
[ 2089.511030] sd 0:0:0:0: [sda]
[ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511037] sd 0:0:0:0: [sda]
[ 2089.511039] Sense Key : 0xb [current] [descriptor]
[ 2089.511043] Descriptor sense data with sense descriptors (in hex):
[ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511061] 1a 07 b2 c7
[ 2089.511069] sd 0:0:0:0: [sda]
[ 2089.511071] ASC=0x0 ASCQ=0x0
[ 2089.511076] sd 0:0:0:0: [sda] CDB:
[ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
[ 2089.511090] end_request: I/O error, dev sda, sector 436711055
[ 2089.511111] sd 0:0:0:0: [sda]
[ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511118] sd 0:0:0:0: [sda]
[ 2089.511120] Sense Key : 0xb [current] [descriptor]
[ 2089.511125] Descriptor sense data with sense descriptors (in hex):
[ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511144] 1a 07 b2 c7
[ 2089.511151] sd 0:0:0:0: [sda]
[ 2089.511154] ASC=0x0 ASCQ=0x0
[ 2089.511158] sd 0:0:0:0: [sda] CDB:
[ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
[ 2089.511173] end_request: I/O error, dev sda, sector 436711071
[ 2089.511188] sd 0:0:0:0: [sda]
[ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511195] sd 0:0:0:0: [sda]
[ 2089.511197] Sense Key : 0xb [current] [descriptor]
[ 2089.511201] Descriptor sense data with sense descriptors (in hex):
[ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511219] 1a 07 b2 c7
[ 2089.511227] sd 0:0:0:0: [sda]
[ 2089.511230] ASC=0x0 ASCQ=0x0
[ 2089.511234] sd 0:0:0:0: [sda] CDB:
[ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
[ 2089.511249] end_request: I/O error, dev sda, sector 436711079
[ 2089.511263] sd 0:0:0:0: [sda]
[ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
[ 2089.511270] sd 0:0:0:0: [sda]
[ 2089.511272] Sense Key : 0xb [current] [descriptor]
[ 2089.511277] Descriptor sense data with sense descriptors (in hex):
[ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 2089.511295] 1a 07 b2 c7
[ 2089.511302] sd 0:0:0:0: [sda]
[ 2089.511305] ASC=0x0 ASCQ=0x0
[ 2089.511309] sd 0:0:0:0: [sda] CDB:
[ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
[ 2089.511324] end_request: I/O error, dev sda, sector 436711087
[ 2089.511343] ata1: EH complete
[ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
error.log (only part related to the current session):
Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
Sep 28 20:20:21 localh

uzsolt wrote:
I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
Errors in logs:
Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
The other partition works well on same disk as I wrote above.
Is /home on /dev/sda3?

Corrupted video with Linux 3.8 and i915

Ever since I upgraded my Linux Kernel to 3.8, I've been getting corrupted graphics after booting. I can get past the corruption if I add "nomodeset" kernel option, however this causes X to use a fallback driver instead of the Intel one.
This is the dmesg logs with the default modesetting and corrupted graphics:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.088 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6786.85 BogoMIPS (lpj=11306960)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000680] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003594] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004879] Mount-cache hash table entries: 256
[ 0.004996] Initializing cgroup subsys cpuacct
[ 0.004998] Initializing cgroup subsys memory
[ 0.005003] Initializing cgroup subsys devices
[ 0.005004] Initializing cgroup subsys freezer
[ 0.005005] Initializing cgroup subsys net_cls
[ 0.005006] Initializing cgroup subsys blkio
[ 0.005023] CPU: Physical Processor ID: 0
[ 0.005024] CPU: Processor Core ID: 0
[ 0.005027] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005289] mce: CPU supports 9 MCE banks
[ 0.005298] CPU0: Thermal monitoring enabled (TM1)
[ 0.005305] process: using mwait in idle threads
[ 0.005308] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005431] Freeing SMP alternatives: 20k freed
[ 0.006105] ACPI: Core revision 20121018
[ 0.007846] ftrace: allocating 19310 entries in 76 pages
[ 0.014700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047607] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047612] TSC deadline timer enabled
[ 0.047615] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047619] ... version: 3
[ 0.047620] ... bit width: 48
[ 0.047620] ... generic registers: 8
[ 0.047621] ... value mask: 0000ffffffffffff
[ 0.047622] ... max period: 000000007fffffff
[ 0.047622] ... fixed-purpose events: 3
[ 0.047623] ... event mask: 00000007000000ff
[ 0.084381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070954] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.124713] Brought up 4 CPUs
[ 0.124716] smpboot: Total of 4 processors activated (27147.40 BogoMIPS)
[ 0.127034] devtmpfs: initialized
[ 0.128242] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.128247] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.128248] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.128249] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.128713] RTC time: 12:28:08, date: 04/21/13
[ 0.128739] NET: Registered protocol family 16
[ 0.128821] ACPI: bus type pci registered
[ 0.128858] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.128860] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.134043] PCI: Using configuration type 1 for base access
[ 0.134456] bio: create slab <bio-0> at 0
[ 0.134491] ACPI: Added _OSI(Module Device)
[ 0.134492] ACPI: Added _OSI(Processor Device)
[ 0.134492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.135068] ACPI: EC: Look up EC in DSDT
[ 0.135781] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.137166] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137329] ACPI: Dynamic OEM Table Load:
[ 0.137331] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.137344] ACPI: SSDT 00000000bae17e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137479] ACPI: Dynamic OEM Table Load:
[ 0.137480] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.137815] ACPI: Interpreter enabled
[ 0.137817] ACPI: (supports S0 S1 S4 S5)
[ 0.137825] ACPI: Using IOAPIC for interrupt routing
[ 0.137957] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.140373] ACPI: No dock devices found.
[ 0.140376] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.140460] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.140461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140644] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.140660] PCI host bridge to bus 0000:00
[ 0.140662] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.140663] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.140664] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.140666] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.140667] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.140668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.140669] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.140670] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[ 0.140676] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.140703] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.140710] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.140714] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.140717] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.140761] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.140782] pci 0000:00:16.0: reg 10: [mem 0xfe407000-0xfe40700f 64bit]
[ 0.140852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.140882] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.140901] pci 0000:00:1a.0: reg 10: [mem 0xfe406000-0xfe4063ff]
[ 0.140986] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.141009] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.141022] pci 0000:00:1b.0: reg 10: [mem 0xfe400000-0xfe403fff 64bit]
[ 0.141084] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.141106] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.141179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.141202] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.141274] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.141305] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.141327] pci 0000:00:1d.0: reg 10: [mem 0xfe405000-0xfe4053ff]
[ 0.141412] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.141435] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.141547] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
[ 0.141560] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 0.141566] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 0.141573] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 0.141580] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 0.141587] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 0.141594] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 0.141635] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.141648] pci 0000:00:1f.3: reg 10: [mem 0xfe404000-0xfe4040ff 64bit]
[ 0.141666] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.141696] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[ 0.141709] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 0.141716] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 0.141723] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 0.141730] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 0.141737] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 0.141743] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 0.141821] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.141889] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.141908] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.141941] pci 0000:02:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref]
[ 0.141961] pci 0000:02:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref]
[ 0.142050] pci 0000:02:00.0: supports D1 D2
[ 0.142051] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.147998] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.148003] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.148013] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.148056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.148071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.148131] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.148233] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.148555] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148580] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.148604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.148627] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.148651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.148699] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.148724] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.148771] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.148772] vgaarb: loaded
[ 0.148773] vgaarb: bridge control possible 0000:00:02.0
[ 0.148791] PCI: Using ACPI for IRQ routing
[ 0.150239] PCI: pci_cache_line_size set to 64 bytes
[ 0.150274] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.150275] e820: reserve RAM buffer [mem 0xbad8c000-0xbbffffff]
[ 0.150276] e820: reserve RAM buffer [mem 0xbae02000-0xbbffffff]
[ 0.150277] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[ 0.150330] NetLabel: Initializing
[ 0.150330] NetLabel: domain hash size = 128
[ 0.150331] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.150338] NetLabel: unlabeled traffic allowed by default
[ 0.150351] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.150354] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.152358] Switching to clocksource hpet
[ 0.154978] pnp: PnP ACPI init
[ 0.154986] ACPI: bus type pnp registered
[ 0.155052] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.155054] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.155055] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.155056] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.155057] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.155060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155126] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.155127] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.155128] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.155130] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155242] pnp 00:02: [dma 0 disabled]
[ 0.155272] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.155473] pnp 00:03: [dma 0 disabled]
[ 0.155550] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.155556] pnp 00:04: [dma 4]
[ 0.155565] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.155584] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155595] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.155622] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.155624] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155639] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.155737] system 00:09: [io 0x0400-0x0453] has been reserved
[ 0.155738] system 00:09: [io 0x0458-0x047f] has been reserved
[ 0.155740] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.155741] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.155742] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.155744] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.155745] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.155746] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.155748] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155778] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 0.155779] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.155841] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.155914] pnp: PnP ACPI: found 12 devices
[ 0.155915] ACPI: ACPI bus type pnp unregistered
[ 0.161646] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161660] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.161666] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161686] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.161687] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.161688] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.161689] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.161690] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.161692] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.161693] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
[ 0.161694] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.161695] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.161711] NET: Registered protocol family 2
[ 0.161855] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.162134] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.162257] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.162268] TCP: reno registered
[ 0.162280] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162322] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.162389] NET: Registered protocol family 1
[ 0.162397] pci 0000:00:02.0: Boot video device
[ 1.491880] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821411] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.821534] PCI: CLS 64 bytes, default 64
[ 2.821560] Unpacking initramfs...
[ 2.860148] Freeing initrd memory: 3292k freed
[ 2.860410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.860412] software IO TLB [mem 0xb6d7e000-0xbad7e000] (64MB) mapped at [ffff8800b6d7e000-ffff8800bad7dfff]
[ 2.860631] audit: initializing netlink socket (disabled)
[ 2.860638] type=2000 audit(1366547290.869:1): initialized
[ 2.869024] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.870168] VFS: Disk quotas dquot_6.5.2
[ 2.870192] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.870287] msgmni has been set to 31925
[ 2.870432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.870451] io scheduler noop registered
[ 2.870452] io scheduler deadline registered
[ 2.870455] io scheduler cfq registered (default)
[ 2.870600] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.870600] vesafb: scrolling: redraw
[ 2.870602] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.871275] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 2.980432] Console: switching to colour frame buffer device 240x67
[ 3.089134] fb0: VESA VGA frame buffer device
[ 3.089141] intel_idle: MWAIT substates: 0x1120
[ 3.089141] intel_idle: v0.4 model 0x3A
[ 3.089142] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.089165] GHES: HEST is not enabled!
[ 3.089198] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.109690] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.109934] Linux agpgart interface v0.103
[ 3.109973] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.110328] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.110343] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.110406] mousedev: PS/2 mouse device common for all mice
[ 3.110446] rtc_cmos 00:05: RTC can wake from S4
[ 3.110549] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.110579] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.110620] cpuidle: using governor ladder
[ 3.110670] cpuidle: using governor menu
[ 3.110671] EFI Variables Facility v0.08 2004-May-17
[ 3.110696] drop_monitor: Initializing network drop monitor service
[ 3.110739] TCP: cubic registered
[ 3.110796] NET: Registered protocol family 10
[ 3.110880] NET: Registered protocol family 17
[ 3.110888] Key type dns_resolver registered
[ 3.111039] PM: Hibernation image not present or could not be loaded.
[ 3.111044] registered taskstats version 1
[ 3.111641] Magic number: 9:762:481
[ 3.111722] rtc_cmos 00:05: setting system clock to 2013-04-21 12:28:11 UTC (1366547291)
[ 3.112698] Freeing unused kernel memory: 820k freed
[ 3.112774] Write protecting the kernel read-only data: 8192k
[ 3.115117] Freeing unused kernel memory: 1224k freed
[ 3.116059] Freeing unused kernel memory: 440k freed
[ 3.120597] systemd-udevd[55]: starting version 201
[ 3.121991] [drm] Initialized drm 1.1.0 20060810
[ 3.122543] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.122548] ACPI: Power Button [PWRB]
[ 3.122604] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.122606] ACPI: Power Button [PWRF]
[ 3.124834] [drm] Memory usable by graphics device = 2048M
[ 3.124837] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 3.124838] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.124847] Console: switching to colour dummy device 80x25
[ 3.124912] i915 0000:00:02.0: setting latency timer to 64
[ 3.147632] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 3.147637] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.147638] [drm] Driver supports precise vblank timestamp query.
[ 3.147660] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.160432] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 3.170403] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 3.223613] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.074424] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 4.094365] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 4.094384] tsc: Refined TSC clocksource calibration: 3392.294 MHz
[ 4.094386] Switching to clocksource tsc
[ 4.147630] [drm:init_ring_common] *ERROR* bsd ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 4.147706] [drm:i915_driver_load] *ERROR* failed to init modeset
[ 4.148415] i915: probe of 0000:00:02.0 failed with error -5
[ 4.161263] ACPI: bus type usb registered
[ 4.161317] usbcore: registered new interface driver usbfs
[ 4.161324] usbcore: registered new interface driver hub
[ 4.161413] usbcore: registered new device driver usb
[ 4.161574] SCSI subsystem initialized
[ 4.162262] ACPI: bus type scsi registered
[ 4.162335] libata version 3.00 loaded.
[ 4.162367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.162577] ehci-pci: EHCI PCI platform driver
[ 4.162612] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 4.162615] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.162619] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.162631] ehci-pci 0000:00:1a.0: debug port 2
[ 4.166507] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.166520] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe406000
[ 4.174224] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.174406] hub 1-0:1.0: USB hub found
[ 4.174411] hub 1-0:1.0: 2 ports detected
[ 4.174488] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4.174491] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.174494] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.174504] ehci-pci 0000:00:1d.0: debug port 2
[ 4.178376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.178387] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe405000
[ 4.187519] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.187706] hub 2-0:1.0: USB hub found
[ 4.187709] hub 2-0:1.0: 2 ports detected
[ 4.187805] ata_piix 0000:00:1f.2: version 2.13
[ 4.187823] ata_piix 0000:00:1f.2: MAP [
[ 4.187824] P0 P2 P1 P3 ]
[ 4.340467] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.340720] scsi0 : ata_piix
[ 4.341117] scsi1 : ata_piix
[ 4.341342] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
[ 4.341347] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
[ 4.341360] ata_piix 0000:00:1f.5: MAP [
[ 4.341360] P0 -- P1 -- ]
[ 4.480019] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.493313] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 4.493326] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 4.493538] scsi2 : ata_piix
[ 4.493885] scsi3 : ata_piix
[ 4.494108] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[ 4.494109] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[ 4.603626] hub 1-1:1.0: USB hub found
[ 4.603699] hub 1-1:1.0: 4 ports detected
[ 4.709364] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.832948] hub 2-1:1.0: USB hub found
[ 4.833043] hub 2-1:1.0: 6 ports detected
[ 4.898989] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 4.999004] usbcore: registered new interface driver usbhid
[ 4.999005] usbhid: USB HID core driver
[ 4.999367] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 4.999427] hid-generic 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 5.002139] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
[ 5.002355] hid-generic 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 5.055167] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 5.360826] ata2.00: failed to resume link (SControl 0)
[ 5.424109] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 5.517457] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input4
[ 5.517569] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input0
[ 5.523155] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input5
[ 5.523390] hid-generic 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input1
[ 5.538878] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/input/input6
[ 5.539104] hid-generic 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.4/input2
[ 5.616931] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 5.679916] ata1.01: failed to resume link (SControl 0)
[ 5.702724] input: Western Digital External HDD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input7
[ 5.702795] hid-generic 0003:1058:0705.0006: input,hidraw5: USB HID v1.10 Device [Western Digital External HDD ] on usb-0000:00:1d.0-1.3/input1
[ 5.703448] Initializing USB Mass Storage driver...
[ 5.703513] scsi4 : usb-storage 2-1.3:1.0
[ 5.703555] usbcore: registered new interface driver usb-storage
[ 5.703556] USB Mass Storage support registered.
[ 5.832877] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.832888] ata1.01: SATA link down (SStatus 0 SControl 0)
[ 5.839930] ata1.00: ATA-8: Hitachi HDS721010CLA330, JP4OA3MA, max UDMA/133
[ 5.839934] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.853220] ata1.00: configured for UDMA/133
[ 5.853398] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 6.381306] ata2.01: failed to resume link (SControl 0)
[ 6.392485] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 6.392498] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 6.393465] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.393486] sd 0:0:0:0: [sda] Write Protect is off
[ 6.393488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.393496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.398867] sda: sda1 sda2
[ 6.399148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.684261] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.704492] scsi 4:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4
[ 6.705358] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.706072] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.706077] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.706816] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.706824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709057] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.709064] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.709536] sdb: sdb1 sdb2 sdb3
[ 6.712170] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6.712177] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.712182] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 7.159102] systemd[1]: systemd 201 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.170787] systemd[1]: Set hostname to <monolith>.
[ 7.649154] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.649194] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.649202] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[ 7.649209] systemd[1]: Starting Network is Online.
[ 7.649215] systemd[1]: Reached target Network is Online.
[ 7.649220] systemd[1]: Starting mnt-netfs.automount.
[ 7.661823] systemd[1]: Set up automount mnt-netfs.automount.
[ 7.661832] systemd[1]: Starting Remote File Systems.
[ 7.661838] systemd[1]: Reached target Remote File Systems.
[ 7.661843] systemd[1]: Starting Syslog Socket.
[ 7.661864] systemd[1]: Listening on Syslog Socket.
[ 7.661870] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 7.661885] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.661890] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.661900] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.661904] systemd[1]: Starting LVM2 metadata daemon socket.
[ 7.661918] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.661923] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.661934] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.661940] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.661962] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.661980] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.662020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.662026] systemd[1]: Starting Journal Socket.
[ 7.662050] systemd[1]: Listening on Journal Socket.
[ 7.662059] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.682703] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.686581] systemd[1]: Starting Apply Kernel Variables...
[ 7.690932] systemd[1]: Mounting Debug File System...
[ 7.694343] systemd[1]: Starting Journal Service...
[ 7.700886] systemd[1]: Started Journal Service.
[ 7.712541] systemd[1]: Starting Load Kernel Modules...
[ 7.714248] systemd[1]: Starting Encrypted Volumes.
[ 7.714259] systemd[1]: Reached target Encrypted Volumes.
[ 7.714267] systemd[1]: Starting Setup Virtual Console...
[ 7.730815] systemd[1]: Starting udev Kernel Socket.
[ 7.730835] systemd[1]: Listening on udev Kernel Socket.
[ 7.730869] systemd[1]: Starting udev Control Socket.
[ 7.730884] systemd[1]: Listening on udev Control Socket.
[ 7.730912] systemd[1]: Starting udev Coldplug all Devices...
[ 7.747426] systemd[1]: Starting udev Kernel Device Manager...
[ 7.770676] systemd[1]: Mounting Huge Pages File System...
[ 7.787329] systemd[1]: Starting Swap.
[ 7.787341] systemd[1]: Reached target Swap.
[ 7.787360] systemd[1]: Started File System Check on Root Device.
[ 7.787366] systemd[1]: Mounting Temporary Directory...
[ 7.810621] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.817216] systemd[1]: Expecting device dev-disk-by\x2duuid-e2db39e9\x2d056c\x2d44ed\x2d8d42\x2d1b027e4a0d24.device...
[ 8.023502] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.045846] systemd-udevd[121]: starting version 201
[ 8.151804] loop: module loaded
[ 8.186713] vboxdrv: Found 4 processor cores.
[ 8.186976] vboxdrv: fAsync=0 offMin=0x216 offMax=0x9aea
[ 8.187033] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.187034] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 8.716904] ACPI: Requesting acpi_cpufreq
[ 8.728317] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.767237] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
[ 8.853130] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.853132] ACPI: Thermal Zone [THRM] (37 C)
[ 8.929755] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 9.026224] mei 0000:00:16.0: setting latency timer to 64
[ 9.026302] mei 0000:00:16.0: irq 40 for MSI/MSI-X
[ 9.032384] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.032430] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 9.167592] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.167844] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 9.167971] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90005c22000, b8:97:5a:0a:fc:9e, XID 0c900800 IRQ 41
[ 9.167973] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.345693] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
[ 9.386088] ppdev: user-space parallel port driver
[ 9.386810] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
[ 9.387792] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
[ 9.388032] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.469096] media: Linux media interface: v0.10
[ 9.476345] Linux video capture interface: v2.00
[ 9.497387] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
[ 9.510837] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input9
[ 9.510906] usbcore: registered new interface driver uvcvideo
[ 9.510907] USB Video Class driver (1.1.1)
[ 9.529106] iTCO_vendor_support: vendor-support=0
[ 9.537373] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 9.537428] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.537524] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.544558] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 9.607707] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.626188] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.626255] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.626287] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.626319] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.626349] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 10.336472] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.732413] 4:3:1: cannot set freq 16000 to ep 0x86
[ 10.881026] usbcore: registered new interface driver snd-usb-audio
[ 10.903764] r8169 0000:02:00.0 eth0: link down
[ 10.903796] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.903806] r8169 0000:02:00.0 eth0: link down
[ 11.696715] systemd-logind[297]: Watching system buttons on /dev/input/event1 (Power Button)
[ 11.696774] systemd-logind[297]: Watching system buttons on /dev/input/event0 (Power Button)
[ 12.498819] r8169 0000:02:00.0 eth0: link up
[ 12.498826] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.281485] FS-Cache: Loaded
[ 19.295688] FS-Cache: Netfs 'cifs' registered for caching
[ 19.295798] Key type cifs.spnego registered
[ 19.295811] Key type cifs.idmap registered
[ 74.361879] mtrr: no MTRR for d0000000,3ff0000 found
With modesetting disabled I no longer see " [drm:i915_driver_load] *ERROR* failed to init modeset", but get a new error that the agpgart module cannot be initialized:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bad8bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad8c000-0x00000000badd5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000badd6000-0x00000000badddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000badde000-0x00000000baddefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baddf000-0x00000000bae00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae01000-0x00000000bae01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae11fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae12000-0x00000000bae1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae20000-0x00000000bae44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bae45000-0x00000000bae87fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bae88000-0x00000000baffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000e00fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fe407fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: BIOSTAR Group H61MGC/H61MGC, BIOS 4.6.4 01/19/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 43FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbae02 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd80-0x000fcd8f] mapped at [ffff8800000fcd80]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbae01fff]
[ 0.000000] [mem 0x00000000-0xbadfffff] page 2M
[ 0.000000] [mem 0xbae00000-0xbae01fff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbae01fff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x43fdfffff]
[ 0.000000] [mem 0x100000000-0x43fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x43fdfffff @ [mem 0xbad7e000-0xbad8bfff]
[ 0.000000] RAMDISK: [mem 0x37982000-0x37cb8fff]
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000badd6068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000baddcfe0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000badd6150 06E89 (v02 ALASKA A M I 00000014 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bae17f80 00040
[ 0.000000] ACPI: APIC 00000000baddd0d8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000baddd150 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000baddd258 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000baddd298 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASPT 00000000baddd2d0 00034 (v07 ALASKA PerfTune 01072009 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43fdfffff]
[ 0.000000] NODE_DATA [mem 0x43fdfb000-0x43fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f400000-ffff88043f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbad8bfff]
[ 0.000000] node 0: [mem 0xbae01000-0xbae01fff]
[ 0.000000] node 0: [mem 0x100000000-0x43fdfffff]
[ 0.000000] On node 0 totalpages: 4171547
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11879 pages used for memmap
[ 0.000000] DMA32 zone: 748326 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3354120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bad8c000 - 00000000badd6000
[ 0.000000] PM: Registered nosave memory: 00000000badd6000 - 00000000badde000
[ 0.000000] PM: Registered nosave memory: 00000000badde000 - 00000000baddf000
[ 0.000000] PM: Registered nosave memory: 00000000baddf000 - 00000000bae01000
[ 0.000000] PM: Registered nosave memory: 00000000bae02000 - 00000000bae12000
[ 0.000000] PM: Registered nosave memory: 00000000bae12000 - 00000000bae20000
[ 0.000000] PM: Registered nosave memory: 00000000bae20000 - 00000000bae45000
[ 0.000000] PM: Registered nosave memory: 00000000bae45000 - 00000000bae88000
[ 0.000000] PM: Registered nosave memory: 00000000bae88000 - 00000000bb000000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0100000
[ 0.000000] PM: Registered nosave memory: 00000000e0100000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe408000
[ 0.000000] PM: Registered nosave memory: 00000000fe408000 - 00000000fe800000
[ 0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fea00000
[ 0.000000] PM: Registered nosave memory: 00000000fea00000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
[ 0.000000] PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xcfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043fa00000 s85184 r8192 d21312 u524288
[ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4106358
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b10de096-a448-4f73-b737-8a93cda3da03 ro quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16342728k/17823744k available (4908k kernel code, 1137556k absent, 343460k reserved, 4024k data, 820k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3392.360 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.41 BogoMIPS (lpj=11307866)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003579] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004861] Mount-cache hash table entries: 256
[ 0.004978] Initializing cgroup subsys cpuacct
[ 0.004980] Initializing cgroup subsys memory
[ 0.004985] Initializing cgroup subsys devices
[ 0.004986] Initializing cgroup subsys freezer
[ 0.004987] Initializing cgroup subsys net_cls
[ 0.004988] Initializing cgroup subsys blkio
[ 0.005004] CPU: Physical Processor ID: 0
[ 0.005005] CPU: Processor Core ID: 0
[ 0.005009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005270] mce: CPU supports 9 MCE banks
[ 0.005280] CPU0: Thermal monitoring enabled (TM1)
[ 0.005287] process: using mwait in idle threads
[ 0.005289] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[ 0.005412] Freeing SMP alternatives: 20k freed
[ 0.006082] ACPI: Core revision 20121018
[ 0.007828] ftrace: allocating 19310 entries in 76 pages
[ 0.014664] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047574] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.047580] TSC deadline timer enabled
[ 0.047582] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.047586] ... version: 3
[ 0.047586] ... bit width: 48
[ 0.047587] ... generic registers: 8
[ 0.047588] ... value mask: 0000ffffffffffff
[ 0.047588] ... max period: 000000007fffffff
[ 0.047589] ... fixed-purpose events: 3
[ 0.047590] ... event mask: 00000007000000ff
[ 0.087678] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.074249] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.128013] Brought up 4 CPUs
[ 0.128016] smpboot: Total of 4 processors activated (27149.66 BogoMIPS)
[ 0.130345] devtmpfs: initialized
[ 0.131553] PM: Registering ACPI NVS region [mem 0xbad8c000-0xbadd5fff] (303104 bytes)
[ 0.131558] PM: Registering ACPI NVS region [mem 0xbadde000-0xbaddefff] (4096 bytes)
[ 0.131559] PM: Registering ACPI NVS region [mem 0xbae12000-0xbae1ffff] (57344 bytes)
[ 0.131560] PM: Registering ACPI NVS region [mem 0xbae45000-0xbae87fff] (274432 bytes)
[ 0.132024] RTC time: 13:15:37, date: 04/21/13
[ 0.132050] NET: Registered protocol family 16
[ 0.132136] ACPI: bus type pci registered
[ 0.132173] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.132175] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.137361] PCI: Using configuration type 1 for base access
[ 0.137775] bio: create slab <bio-0> at 0
[ 0.137809] ACPI: Added _OSI(Module Device)
[ 0.137810] ACPI: Added _OSI(Processor Device)
[ 0.137811] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137811] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138385] ACPI: EC: Look up EC in DSDT
[ 0.139103] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.140495] ACPI: SSDT 00000000bae16c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.140660] ACPI: Dynamic OEM Table Load:
[ 0.140662]

Meanwhile, I encountered it seems to be a problem of the gdm in conjunction with the gpu and the intel driver - once again :-(
Look at this thread: https://bbs.archlinux.org/viewtopic.php?id=161964
Actually, I can start my DE (Gnome 3.8) manually with the following workaround:
First, I disable gdm on my machine
# systemctl disable gdm
After bootin the machine, I'm logging in into the console
$ startx
stopping the X system again
$ sudo systemctl start gdm
logging in into the Gnome Shell.
I need to start the X server first manually. Otherwise the gdm will hang again.
Last edited by thesofty (2013-04-24 21:12:10)

Failed boot after moving hard drive (IDE not SATA)

Greetings all.
I am attempting to setup a headless box, and in doing so I am installing Arch on one system (Sapphire Axion A3-M275 Motherboard), then moving the hard drive to the new system (SGS1660, a VIA CLE266/VT8235 based headless rack-solution). After moving the drive into the SGS1660, the system fails to boot. Attached output from the Serial Console:
Booting 'Arch Linux'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz26 root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b r
o console=ttyS0,115200
[Linux-bzImage, setup=0x3600, size=0x1ad6d0]
initrd /kernel26.img
[Linux-initrd @ 0x2ff21000, 0x9e7a5 bytes]
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffde000 (ACPI data)
BIOS-e820: 000000002ffde000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002ffd0000 (usable)
modified: 000000002ffd0000 - 000000002ffde000 (ACPI data)
modified: 000000002ffde000 - 0000000030000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000002ffd0000
RAMDISK: 2ff21000 - 2ffbf7a5
ACPI: RSDP 000f6ad0 00014 (v00 ACPIAM)
ACPI: RSDT 2ffd0000 0002C (v01 A M I OEMRSDT 09000521 MSFT 00000097)
ACPI: FACP 2ffd0200 00084 (v02 A M I OEMFACP 09000521 MSFT 00000097)
ACPI: DSDT 2ffd0390 03270 (v01 MiniV MiniV080 00000080 INTL 02002026)
ACPI: FACS 2ffde000 00040
ACPI: OEMB 2ffde040 00046 (v01 A M I AMI_OEM 09000521 MSFT 00000097)
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffd0000
low ram: 0 - 2ffd0000
node 0 low ram: 00000000 - 2ffd0000
node 0 bootmap 00011000 - 00016ffc
(9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
#4 [002ff21000 - 002ffbf7a5] RAMDISK ==> [002ff21000 - 002ffbf7a5]
#5 [0000099c00 - 0000100000] BIOS reserved ==> [0000099c00 - 0000100000]
#6 [0000627000 - 0000629230] BRK ==> [0000627000 - 0000629230]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffd0
HighMem 0x0002ffd0 -> 0x0002ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffd0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1606000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911
Kernel command line: root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ro console=ttyS0,115200
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1326.894 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 772708k/786240k available (2905k kernel code, 12976k reserved, 1052k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc04e3000 - 0xc0545000 ( 392 kB)
.data : 0xc03d647f - 0xc04dd6a8 (1052 kB)
.text : 0xc0100000 - 0xc03d647f (2905 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2654.36 BogoMIPS (lpj=4422980)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20090320
ACPI: setting ELCR to 0200 (from 8c20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2654.36 BogoMIPS).
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xe900-0xe90f has been reserved
system 00:05: ioport range 0xea00-0xea0f has been reserved
system 00:05: ioport range 0xeb00-0xeb2f has been reserved
system 00:05: ioport range 0xec00-0xec7f has been reserved
system 00:05: ioport range 0xe800-0xe83f has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f could not be reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0x100000-0x2fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xddd00000-0xdfdfffff
pci 0000:00:01.0: PREFETCH window: 0x000000d5c00000-0x000000ddbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 633k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1248948860.509:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1510
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
:: Loading Initramfs
:: Running Hook [udev]
:: Loading udev...SCSI subsystem initialized
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
done.
Waiting 10 seconds for device /dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ...
Root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' doesn't exist, attempting to create it
ERROR: Failed to parse block device ids for '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
ERROR: Unable to detect or create root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
You are being dropped to a recovery shell
Type 'reboot' to reboot
Type 'exit' to try and continue booting
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' gets created while you are here,
try adding 'rootdelay=10' or higher to the kernel command-line
ramfs$
I think what is happening is that the kernel does not have the drivers for the IDE controller on the board for the CLE266/VT8235. Does this seem accurrate? And if so, how can I verify the current kernel config, then compile a kernel with everything else Arch needs to boot properly? I am familiar with the old means of setting up a kernel using the 'make menuconfig; make; make modules_install' etc method.
Thanks for the help in advance!

Hi, not sure if this is still causing you an issue, but I just ran into the same problem.
For me, I have a Sharp PC=MM1110 which has no cd drive and doesn't like to boot from USB. To get Arch installed on it, I had to attach it to another PC (via it's docking cradle, which lets it show up as a USB hard drive), then boot the other PC from an Arch install cd and select the USB hdd for all of the partitioning etc.
When I rebooted after the installation, the Sharp wouldn't boot.
First, I had to edit the grub menu entry to point to (hd0,0), at which point I got the error listed in the first post... Failed to parse block device id's.
If i booted into fallback mode, it booted without a problem.
For me, the solution to finally get it working was to boot into fallback mode, remount the filesystem as r/w, and run mkinitcpio -g filename to rebuild the kernel. Once completed all I had to do was point grub to the new kernel image and it booted ok.
Hope this is useful to someone

Traffic allow

Similar Messages

Maybe you are looking for