Traffic light in RF monitor screen (LRF1) - how it is derive from?

Hi,
This is a question about WM-RF. My question is how does the system determine the traffic light color in the RF monitor screen (LRF1). I read the SAP help portal and compare it to the screen and it still doesn't make any sense out of it..
On the SPRO, there is DEFINE QUEUE table, with thefollowing setup:
WS--QUEUEQName-CapacUsed-CapacUsed----AccessLim
110--B01_GEN-GenName610--
2StrictLimitation
Thus the relation is: 6/10 = 0.6
Next, I went to LRF1 and saw this record with warehouse 110, and Queue B01GEN, and having the following value_:
QUEUE -
TOs--LOADProc.By--
Propotion
B01_GEN----150.0002--
Green
Thus the relation is: 15/2 = 7.5
Why is it green? SAP help portal give the following explaination, and I don't know to derive it?
A- The queue tranffic light is green if the relation is less than the value given in the left relation field.
B - The queue traffic light is yellow if the relation is greater than or the same as the value specified in the right field.
C - The queue traffic light is red if the relation is greater than or the same as the value specified in the left relation field.
Please share if you know.
Thanks..Tuff

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

Similar Messages

Traffic light in Module Pool screen

How to display traffic light in a module pool screen

To display a traffic light in a screen, put a icon/ i/o field (display only) on the screen.
Say my screen has an icon element ICON_GREEN_LIGHT
Now in my Top include create a data elemnt like
Data:ICON_GREEN_LIGHT(4) type c.
and in PBO assign the value as:
ICON_GREEN_LIGHT = '@08@'." Green light; positive
Check type-group ICON for the 4 char string

Everytime I click on the down arrow on the firefox button firefox fills my monitor screen. How do I stop this as it did not happen in the past

Had to uninstall and reinstall firefox several times as something was trying to take it over. The only way I stopped it in the end was to go back to a restore point on my computer. Anyway, before I had this problem I had firefox leave a border down the right side of my screen. Now it is okay when I start firefox, border in place, but as soon as I click the down arrow on the firefox button for anything firefox covers the whole screen. How can I stop this?

You can check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Yahoo page is too big for monitor screen. How doI reduce size of yahoo page?

When I open firefox the yahoo home page is too big for the size of the monitor.

Hi,
Try resetting the zoom by pressing '''Ctrl''' + '''0''' (zero) on the keyboard. Please [https://support.mozilla.com/en-US/kb/how-do-i-use-zoom?s=zoom+feature&r=0&as=s see this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

I do not see a blue light next to my screen. How do I turn wireless on.

I cannot get my wireless system to recognize other computers in the Network.

a little more information:
I tried following http://support.apple.com/kb/HT4083 steps... but when i try step 3, but the resulting window that pops up is the picture for step 8. it's skipping the option to choose a folder. Does anyone know how I can get this option to show back up?

BP Screen Layout - How to move information from one TAB to another for a BP

Hi all,
I am trying to understand what the actual driver of the tabs to be displayed for maintaining a BP role is in CRM 5.0.
In my case the 'Business hour' dataset appears in the 'Control tab' but I want it to appear in the 'Calling-/Visiting hours tab'. If I delete the dataset from the BP view it disappears from the Control tab, but how do I get it to appear on the Calling-/Visiting hours tab? Could the Screen Layout be used?
According to the steps below I created a new BP role and assigned a new BP view:
- I created a new screen for Calling/Visiting hours (t-code BUS5) and included the section for Business hours. At the same time I created a new screen for Control and removed the section for Business hours.
- I assigned the new screens to a new Screen sequence and at the same time deleted the two screens not relevant anymore (t-code BUS6).
- I assigned the Screen sequence created to a new Screen sequence category (t-code BUS6).
- Finally I assigned the Screen sequence category to the BP view (t-code BUSD) and the BP view to the BP role (IMG - Define BP roles)
However, the screen sequence assigned does not seem to impact how the BP is displayed at maintenance (t-code BP).
- Is it the screen sequence or the datasets assigned to the BP view in t-code BUSD that determines what tabs are displayed when maintaining the BP?
- What is the purpose of the screen sequences?
I would appreciate very much your support!
Thanks,
//Anders
Edited by: Anders Grönwald on Mar 27, 2008 9:25 PM
Edited by: Anders Grönwald on Mar 27, 2008 9:27 PM

hi
For this you need Abaper's assitance first you should know
field , tables of 1 st data tab data from which table it is coming
field name and all , later in new data tab in abap editor coding you shoud give that table name and field names as reference
it's like linking, try it you can do it.
Cheers
Venkat

How dunning area derived from sales area

Dear Guru,
When you press F1 on dunning area, you will get the following:
Dependencies
The dunning area must be noted in the line items. As long as documents are copied from preliminary work areas (billing documents), the dunning area can be derived from details such as division or sales area, if necessary.
Here i want to know any IMG setting to set dunnign area derived from sales area?
The reason is that I noticed that in BSEG table, those Sale billing document with dunning area = blank. could anybody tell me the following
1) any duning area derivation in IMG need to set, eg, dunning are derived from division/sales area
2) which table, the dunning are is noted for billing document from sales side.
Thanks,
Kick

Hiya,
One assigns the Dunning Area to the Sales Area in table TVTA.
In IMG, follow the path:
Sales & Distribution --> Basic Functions --> Account Assignment/Costing --> Assign Dunning Areas
This is again based on requirement. You normally assign Dunning Areas to the Company Code.
Hope this helps.
Cheers.

How to delete request in yellow traffic light?

Hi experts:
I created one infopackage yesterday to load the vendor text from our DEV source system. Its update mode is "Initialize Delta Process". When I right click on the infopackage and select manage, I see this request is still in yellow and 'Request has a yellow traffic light in the monitor - Cannot be deleted.' And when I go to Data selection I got the information: "Init. select. for field name currently running in request ***".
Does anybody know how to delete the request still in running or in yellow traffic?
Another thing is when I double click on the infopackage a warning message will pop up with: " Assign a language field to IOBJ 0LANGU; danger of short dump". Do I need to take care of this warning?
Thanks to everyone for your time in advance~
Tim

Hi,
Make the request forcefully into RED and then delete it, you can do it in RSMO or goto Obejct and Manage and then Click on YELLOW color Ball and then it will popup one window there make to red and delete it.
The reasons for Yellow
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks

How do I print only the text on the monitor screen?

I would like to be able to print only that portion of a text that is on the monitor screen. How do I do that?
I have an Epson Workforce 325 printer, and an HP desktop computer PC

Please see the following to print only the text portion of the web page. I am assuming you wish to print just the text & not the ads or additional irrelevant items to avoid wasting ink.
See:
[[Printing a web page]]
'''If this solved your issue, please select ''solved ''& chose the appropriate ''solution'' to close this ticket/question posting'''.

MRP Traffic lights

Hi All,
Can somebody explain me about MRP Traffic lights. What is its significance. I have explain my client. Please explain with example.
Thanks,
Milind

Hi,
The traffic light values (red, yellow, green) indicate how urgently materials need to be processed.
Red traffic lights immediately indicate that the appropriate materials are critical and urgently need to be processed.
pls refer the links
http://help.sap.com/saphelp_470/helpdata/en/60/4da223129c11d3b49d0004ac160649/content.htm
http://help.sap.com/saphelp_470/helpdata/en/2c/471d0f0e0311d3b4990004ac160649/content.htm
Edited by: sheik abdulla on May 9, 2008 12:13 PM

The traffic light meaning in LRF1 (Warehouse Monitoring)

Hi,
The sap help portal explaination on the traffic light meaning in LRF1 (Warehouse Monitoring) is quite confusing.
1.     Green u2013 the proportion is less than or equal to the lower threshold
2.     Yellow (warning) u2013 the proportion is greater than the lower threshold
3.     Red (critical) u2013 the proportion is greater than the upper threshold
what is exactly does it mean and what is the impact for the user? an example will be great.
thanks
Tuff

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

How to differentiate defects in QA32 using Traffic light

Hi QM Experts,
My scenario is,
How to set Monitor control in QA32 screen.
In the QA32 screen list of inspection lot will be displayed, for that inspection lot if any characteristics value is within / outside the limit, ie. for example specification is A2,R3 and i found 1 defect also defect is 4.
how to differentiate this with the help of Traffic light.
Regards,
Krish

Hi Krish,
As per best of my information, the traffic lights in QA32, depends on the Start Sate and End Date of the inspection lot.
If the End Date is not passed away (the current date is between the Start Date and End Date) it will be yellow.
If the End Date is Passed away and UD is not not for the Lot then the traffic light will be RED and as soon as UD done at any date/stage the light will become Green.
Conclusively, the light can't be linked with Defect Codes.
Regards,
Shyamal

How to print traffic lights in ALV reports

hi how to print traffic lights on selection screen in alv reports

HI,
check below code
TYPE-POOLS : icon.
types: BEGIN OF ty_display,
        status     TYPE icon-id,
        bukrs      TYPE bseg-bukrs,
        gjahr      TYPE bseg-gjahr,
        monat      TYPE monat,
        work_order TYPE z_work_order,
        glaccount TYPE saknr,
        message    TYPE string,
      END OF ty_display.
data : it_display     TYPE TABLE OF ty_display,
         wa_display TYPE ty_display.
WRITE icon_led_green AS ICON TO wa_display-status.
        wa_display-gjahr = p_year.
        wa_display-bukrs = p_cc.
        wa_display-monat = p_period.
        wa_display-work_order = v_aufnr.
        wa_display-glaccount = wa_bseg-hkont.
    APPEND wa_display TO it_display.
WRITE icon_led_red AS ICON TO wa_display-status.
          wa_display-gjahr      = p_year.
          wa_display-bukrs      = p_cc.
          wa_display-monat      = p_period.
          wa_display-work_order = v_aufnr.
          wa_display-glaccount = wa_bseg-hkont.
          wa_display-message    = text-010.
          APPEND wa_display TO it_display.
change the icon color based on your requirement and append it to the internal table which you have to display in ALV.
reward points if it is helpful.
Regards,
Srilatha

RF monitor traffic lights

How do the two fields of capacity used work to define the workload for users in the RF monitor traffic lights?

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

How to ... Traffic Lights from Exceptions or CellValue in WAD

Hi all,
I need to create traffic lights in the WAD. They should occur either depending on exceptions of a certain query/view or on a special cell value (which I suppose to be quite complex ... table interface(?)).
I tried the alert monitor element, but that doesnt suite the "traffic light" expectations as it seems.
Does anybody of you have a manual for creating fancy traffic lights in the WAD? Is there a way without hardcoding this table interface? (I am unexperienced with stuff like that / ABAP coding - if you could guide me through to having a suitable interface I could use with JavaScript then, I would be delighted)
Best regards and thanks very much in advance for some answers,
Michael

Michael,
I am not sure if you can have icons outside the query that can be controlled by the query values. You could do one thing ...
1. have a query with an extra Key figure.
2. Have your validation formulae on this key figure and have an exception on the same
3. Now your exception column would have three colors.
4. Now execute the report in IE and go to view source.
5. Look for the stylesheet classes for the exceptions , they would be something like SAPBexGood1... etc
6. Go to the table interface ( I assume that you would have figured out how to inherit the class and modify the same from the how to paper...)
7. Go to c_cell_data
8. if cell_style="SAPBeXGood1" then replace c_cell_content with <img src="/sap/bw/mime/icons/icon1.gif" /img>
9. Go to the css and find out your stylesheet class.
10. Remove the background color attribute from the required style.
for checking through JavaScript.
1. The query should have a separate stylesheet class attached to it.
2. It should have one cell only
3. You can replace the value by using style.innerHTML=whatever you want.
Hope this helps...
Arun
Assign points if found helpful
Message was edited by: Arun Varadarajan

Traffic light in RF monitor screen (LRF1) - how it is derive from?

Similar Messages

Maybe you are looking for