Traffic light signal to indiacate exception in WAD
Hi,
Can someone explaine me how to display traffic light signals( red and green ) in WAD to indiacte the exceptions. my client wants something like this: adverse spending red light image and less spending green light image.
thanks and regards
dhana
Michael,
I am not sure if you can have icons outside the query that can be controlled by the query values. You could do one thing ...
1. have a query with an extra Key figure.
2. Have your validation formulae on this key figure and have an exception on the same
3. Now your exception column would have three colors.
4. Now execute the report in IE and go to view source.
5. Look for the stylesheet classes for the exceptions , they would be something like SAPBexGood1... etc
6. Go to the table interface ( I assume that you would have figured out how to inherit the class and modify the same from the how to paper...)
7. Go to c_cell_data
8. if cell_style="SAPBeXGood1" then replace c_cell_content with <img src="/sap/bw/mime/icons/icon1.gif" /img>
9. Go to the css and find out your stylesheet class.
10. Remove the background color attribute from the required style.
for checking through JavaScript.
1. The query should have a separate stylesheet class attached to it.
2. It should have one cell only
3. You can replace the value by using style.innerHTML=whatever you want.
Hope this helps...
Arun
Assign points if found helpful
Message was edited by: Arun Varadarajan
Similar Messages
-
Can I change default traffic lights setting?
How?Traffic Lights can be defined.
You can use the exception groups to define under which conditions materials are indicated by red, yellow, or green traffic lights. Example: You want all materials, whose dates lie in the past, to be indicated by a red traffic light.
The definition of traffic lights applies to both types of list.
Prerequisites-
You have accessed the material list in collective access, or the MRP list or stock/requirements list for a material.
In case of individual lists: you have displayed the material tree.
Procedure
1. Choose Green Dot
The system displays the Define traffic light dialog box.
2. Enter the number of workdays for the parameters Days' supply, 1st receipt days' supply and 2nd receipt days' supply, and under which circumstances the materials are to be displayed with red, yellow, and green traffic lights.
You want the traffic light to be red when the days' supply for a material is <= 0, yellow when the days' supply is > 0 and <= 10 days, and green when the days' supply is > 10 days.
Enter:
Color Days supply
Red 0
Yellow 10
Green 999,9
4. Use the exception groups to define under which conditions materials are indicated by red, yellow, or green traffic lights.
You want materials with exception messages in exception group 4 to be indicated by a yellow traffic light and materials with exception messages in exception group 5 to be indicated by a red traffic light.
Choose:
Exception group 5 Exception group 5
Red X
Yellow X
Green
6. Save
Reward if cleared and close the thread. -
In MD06, how to define Traffic lights
Hi to All,
We are having more than one plants and every one are using MRP.
After MRP run, we are using MD06 in order to evaluate numerous materials based on same controller.
I would like to define or set traffic lights based on Supply & exception groups which will be applicable for users who
would using this MD06 tcode.
How to define this?
Thanks & Regards
Nitinplease check whether this helps...
https://forums.sdn.sap.com/click.jspa?searchID=31913209&messageID=4081312 -
How to ... Traffic Lights from Exceptions or CellValue in WAD
Hi all,
I need to create traffic lights in the WAD. They should occur either depending on exceptions of a certain query/view or on a special cell value (which I suppose to be quite complex ... table interface(?)).
I tried the alert monitor element, but that doesnt suite the "traffic light" expectations as it seems.
Does anybody of you have a manual for creating fancy traffic lights in the WAD? Is there a way without hardcoding this table interface? (I am unexperienced with stuff like that / ABAP coding - if you could guide me through to having a suitable interface I could use with JavaScript then, I would be delighted)
Best regards and thanks very much in advance for some answers,
MichaelMichael,
I am not sure if you can have icons outside the query that can be controlled by the query values. You could do one thing ...
1. have a query with an extra Key figure.
2. Have your validation formulae on this key figure and have an exception on the same
3. Now your exception column would have three colors.
4. Now execute the report in IE and go to view source.
5. Look for the stylesheet classes for the exceptions , they would be something like SAPBexGood1... etc
6. Go to the table interface ( I assume that you would have figured out how to inherit the class and modify the same from the how to paper...)
7. Go to c_cell_data
8. if cell_style="SAPBeXGood1" then replace c_cell_content with <img src="/sap/bw/mime/icons/icon1.gif" /img>
9. Go to the css and find out your stylesheet class.
10. Remove the background color attribute from the required style.
for checking through JavaScript.
1. The query should have a separate stylesheet class attached to it.
2. It should have one cell only
3. You can replace the value by using style.innerHTML=whatever you want.
Hope this helps...
Arun
Assign points if found helpful
Message was edited by: Arun Varadarajan -
Display Exception as Traffic Lights
Dear All,
is there any possibility to display exceptions per default as traffic lights in a BI 7.0 Web Application? We want to use the same functionality a local status exception is offering. Setting EXCEPTION_RENDERING to Symbol offers the arrow as symbol. Also the command set_exception in the is using the trend exception symbol as default.
Thanks for any input
jensHi ,
You can display the traffic light symbols for exceptions in BI 7.0.
You need to create a Status Exception at WAD level by using List of Exceptions Web Item.
Then you save the executed result as Queryview.
Use this Queryview as the DataProvider for the Analysis Web Item.
Hope this helps. -
Hi
any one can help me how to display the details in exceptions field traffic light . i am facing the problem in execption field. ALV lisst is displaying in all other field but not showing in exception field.Dear Chandan,
If you are using the functionalities of the class CL_SALV_TABLE, try to have a look at this program: SALV_DEMO_TABLE_COLUMNS
and if the class is CL_GUI_ALV_GRID, have a look at this program: BCALV_GRID_04
Just try to compare and analyze what is that you are missing...:)
You can fiund a lot of demo programs in the package: SALV_OBJECTS and SLIS
Hop you find this helpful..:)
Regards
s@k -
Exception groups & Traffic Lights for MRP run shortage quantities
Hi Guys:
How to define Traffic Lights and Exception groups in MD04/Mdo5 transaction?
Or any literature available ?
Thanks
kodaliKodali,
You can customize the exception message and grouping in configuration.
Please follow below mentioned path and do necessary config.
SPRO -> Production --> Materials Requirement Planning --> Evaluation --> Exception Messages.
Regards,
Himanshu -
Traffic lights Vs day's supply
Hi,
In MRP collective lists, system is showing red signal lights to all the materials and showing the message "3.0- days is less than limiting value of 0.1-"
In the day's supply,1stRDS and 2nd columns system is showing the value 3.0-.
In this case, how to change the signal light from red to green?
Can any body please explain the concept behind this?
Thanks in advance.
Sekhar.hi
traffic light depends upon the day's supply and exception messages.
in md04 collective access , display all materials with MRP controller wise. Press the Tab " define traffic lights" there u can put ur own criterion of days supply and R days supply.
Example how system calculates days supply.
Calculation of the range of coverage: Starting from the current plant stock, the requirements are deducted one after the other along the time axis. This is done until there is a shortage (requirement > stock). The range of coverage is then the number of workdays between todays date and the date of the requirement that causes the shortage minus one day. The value after the decimal point is the ratio between the opening stock on the day of the shortage and the requirement on the day of the shortage.
Stock = 240 pcs
1st day: Requirement for 90 pcs => Stock = 150 pcs
2nd day: Requirement for 70 pcs => Stock = 80 pcs
3rd day: Requirement for 100 pcs => Shortage
Range of coverage = 3 workdays minus 1 + 80/100
= 2 + 0,8
= 2,8
Reward if useful
Amit -
Traffic lights on reports disappears
Hi Experts,
I have made the traffic lights settings in WAD exceptions and saved that by Personalising it.Now this report is integrated in portal and it working fine with traffic light since its saved as an View,but in the report I have many fields in Free Chars as drag n drop functionality when I drag n drop anything from free chars column the trafffic lights disappears.
Can anyone guide me on this issue ASAP.
Regards,
PreethiHi Danny,
Yes after drill drop also my Keyfigure values show between exception ranges only,but traffic light disappears,
Can you guide me on this.
Regards,
Preethi -
How to add Traffic Lights to a Report?
Hi,
How do U create a Traffic Light? and how to you change the Light? That's all I need.
Thanks,
Kishanhi dude,
This is the way u add lights to ur alv report.
I'm following this method and i'm getting lights. This will work for sure.
In data declaration along with your alv display structure as a field named lights(any name).
DATA : BEGIN OF wa_srr,
vbeln LIKE vbak-vbeln, "Sales Order number
posnr LIKE vbap-posnr, "Item nunmber
matnr LIKE makt-matnr, "Material number Desc
maktx LIKE makt-maktx, "Material Description
gbstk LIKE vbuk-gbstk, "Completion status
bukrs LIKE knb1-bukrs, "Company Code
butxt LIKE t001-butxt, "Company Code description
vkorg LIKE vbak-vkorg, "Sales organization
vtext LIKE tvkot-vtext, "Sales Org description
vtweg LIKE vbak-vtweg, "Distribution Channel
dtext LIKE tvtwt-vtext, "Dist Channel description
spart LIKE vbak-spart, "Division
dvtxt LIKE tspat-vtext, "Division Description
kunnr LIKE vbak-kunnr, "Customer Number
name1 LIKE kna1-name1, "Customer Name
land1 LIKE kna1-land1, "Country
regio LIKE kna1-regio, "State
ort01 LIKE kna1-ort01, "City
erdat LIKE vbak-erdat, "Creation Date
vdatu LIKE vbak-vdatu, "Due date
kwmeng LIKE vbap-kwmeng, "Material Quantity
netpr LIKE vbap-netpr, "unit net price
netwr LIKE vbap-netwr, "Price
wavwr LIKE vbap-wavwr, "Cost price
bzirk LIKE vbkd-bzirk, "Sales District
bztxt LIKE t171t-bztxt, "Sales District Discription
lights, "Diplaying Status
END OF wa_srr.
While you are building the field cat do as follows
FORM build_layout CHANGING l_wa_layout TYPE slis_layout_alv.
l_wa_layout-zebra = cb_zebr. "Set alterante colored line
l_wa_layout-colwidth_optimize = cb_colop. "Optimize column width
l_wa_layout-no_vline = cb_novli. "No vertical line
l_wa_layout-no_colhead = cb_nocol. "no column Header
l_wa_layout-lights_fieldname = 'LIGHTS'. "Set light field
(assigning the field u have added in ur structure here as light field in alv report)
ENDFORM. " BUILD_LAYOUT
Then as per the logic, u make green, yellow or red light
Example,
FORM build_light .
LOOP AT it_srr INTO wa_srr. "for all entries in the table
IF wa_srr-gbstk = 'C'. "If status is 'completed',
wa_srr-lights = '3'. "Show green signal light
ELSEIF wa_srr-gbstk = 'B'. "If status is 'Partial'
wa_srr-lights = '2'. "Show yellow signal light
ELSE. "If status is 'incomplete'
wa_srr-lights = '1'. "Show red signal light
ENDIF.
MODIFY it_srr FROM wa_srr. "Update to table
ENDLOOP.
ENDFORM. " build_light
after building ur layout, Pass it to ur alv function module like this.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = text-011
pass ur layout structure here********
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort
i_save = v_save
is_variant = wa_variant
is_print = wa_print
TABLES
t_outtab = it_srr
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i001. "List cannot be displayed
ENDIF.
wat all i did to add light is,
1) adding an extra field in the main structure.
2)create internal table with this structure as data table for alv report
3) add 'field name' field in layout
4) I have passed values(3, 2, 1) for green, yellow and red light resp, to the field(LIGHTS) in the internal table that is passed to alv function module.(Based on some condition)
5) pass the layout structure layout to alv function module
Thats it. If u do all this teps, u r done with it.
Lemme know u solved it by giving points.
with regards,
praveen. -
Web item analysis Modification -- Traffic lights
Hi all,
I am using BI 7.0 WAD and I would like to display traffic lights icons in the data of web template.
I was able to do this in 3.5 by using a super class CL_RSR_WWW_MODIFY_ TABLE and modifying the CHARACTERISTIC_CELL field.
Then i used to add <param name="MODIFY_CLASS" value="myclass"/> into the table item object tag.
But this was using table interfaces.
In BI 7.0, the table interfaces are replaced by Web Interfaces and hardly find any help documentation as it is very very limited.
I am trying to display images (traffic lights) for specific characteristic values
zstatus = g then display green
zstatus = y then display yellow
zstatus = r then display red
Could some one please help me resolve this issue.
Thanks a lot
Phani.
Edited by: Phani Kothwali on Oct 27, 2008 3:21 AMHi
Table Interface Class was a wonderful thing wasn't it ... such a pity they took that functionality away from us ... maybe one day they'll bring it back.
Back to your question ... you could use exception reporting in the query. In the query you should be able to specify that when a certain value is encountered, then show that cell in a certain colour, or show a symbol.
Alternately, the best way I have found to date to replicate table interface functionality, is to write some JavaScript that will process the HTML once it has loaded. There is no reason why you couldn't have some script to go through your table and check the values in a certain column. I have written JavaScript to perform custom calculations in a certain column, so you could use a similar approach to simply check the value of the cell, and then change the contents to an image instead of a value.
Hope this helps you .
Cheers,
Andrew -
Traffic light on the basis of last month
Hi guys,
I have a question about the traffic light in the model Visual Composer. I would like to have a traffic light besids a table or graphic that wil be shown the status ( Green, red, yellow!) on the basis of the last month. In the table or in a graphic wil be shown several data of several months. But the traffic light have to respond on the basis of last month. That means that, if the last month exception( in the query) is green, the traffic light also wil be green.
Can anybody help me please?
Another question.
How can i get only two types of order as example in a pie chart? I have seen that in a pie chart you can only add one formula, not two.So!!
Thanks,
Regards,
EsratIn the VC model create an Expression Box. Double click on this box to open up its Properties.
In the control properties window there is tab "Styles", here give Green color to the column 'Style' and in the next column 'Condition' select 'Enter Formula...'
Select the field and enter the condition.
Like
Style Condition
Style 1 @CITY == 'Frankfurt'
Style2 @BANK_CTRY == 'DE' -
Displaying traffic lights in alv grid report?
Hi everyone,
I have an alv grid report.I m using the FM reuse_alv_grod_display to display my alv report.I am passing the fieldcatalogue automatically.I m getting the output perfectly.Now i have to add traffic lights to that alv report.
Since i m passing the fieldcatalogue automatically i m confused to display the traffic lights?
any suggestions please?
Thank you.hi dp,
look at the program i made... se the bold part you will be able to impelment lights easily,
DECLARING TYPES POOL *
All the definitions of internal tables, structures and constants
are declared in a type-pool called SLIS.
type-pools: slis.
TABLES *
tables: vbak,vbap,kna1.
TYPES *
*&--defining types for TABLE VBAK
types: begin of t_vbak,
vbeln type vbeln_va, "sales document
kunnr type kunag,
erdat type erdat,
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
end of t_vbak.
*&--Defining types for TABLE VBAP
types: begin of t_vbap,
vbeln type vbeln_va,
posnr type posnr_va,
matnr type matnr,
maktx type maktx,
end of t_vbap.
*&--MERGED FINAL SALES TABLE
types: begin of t_sales_final,
vbeln type vbeln_va,
kunnr type kunag,
posnr type posnr_va,
erdat type erdat, "date of creation
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
v_lights type c,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
matnr type matnr,
maktx type maktx,
end of t_sales_final.
defining wrokarea and IT.
WORK AREA DECLARATION *
*&---work area for Internal Tables
data: wa_vbak type t_vbak.
data: wa_vbap type t_vbap.
data: wa_sales_final type t_sales_final.
*&--work area for layout
data: wa_layout type slis_layout_alv.
INTERNAL TABLES DECLARATION *
*&---Internal tables without Header Line.
data : i_vbak type standard table of t_vbak,
i_vbap type standard table of t_vbap,
i_sales_final type standard table of t_sales_final.
*&---Internal table for field catalog
data : i_fieldcat type slis_t_fieldcat_alv,
*&---Internal table for the sorting sequence.
i_sortinfo type slis_t_sortinfo_alv,
*&---Internal table for the event catalog.
i_eventcat type slis_t_event,
*&---Internal table for the top of page event
i_listheader type slis_t_listheader.
VARIABLE DECLARATION *
data : v_progname like sy-repid, "Program name(system defined)
v_gridtitle type lvc_title. "Grid Title
INITIALIZATION EVENT *
initialization.
v_progname = sy-repid.
refresh:i_vbak,
i_vbap,
i_sales_final,
i_fieldcat,
i_sortinfo,
i_eventcat,
i_listheader.
clear: wa_vbak,
wa_vbap,
wa_sales_final,
wa_layout.
SELECTION SCREEN *
SCREEN FOR ENTERING INFORMATION
selection-screen begin of block b1 with frame title text-001.
select-options: r_vbeln for wa_vbak-vbeln obligatory.
select-options: r_erdat for wa_vbak-erdat obligatory.
selection-screen end of block b1 .
AT SELECTION SCREEN *
at selection-screen.
perform zf_validate_sales_doc_no.
perform zf_validate_date.
START OF SELECTION EVENT
start-of-selection.
perform zf_populate_header.
perform zf_populate_detail.
perform zf_append_sales_final.
END OF SELECTION EVENT
end-of-selection.
*If Internal Table Is Populated Then Only Display Alv Report.
if i_sales_final is not initial.
Prepare fieldcatalog .
perform zf_build_fieldcat using i_fieldcat.
MODIFY the records IN the internal TABLE for the traffic lights.
perform zf_modify_final.
build event catalogue
perform zf_eventcat using i_eventcat.
build sorting
perform zf_sorting using i_sortinfo.
&---Build Listheader for TOP OF PAGE EVENT.
perform zf_build_listheader using i_listheader.
&---Build layout.
perform zf_layout.
&---Initializating Grid Title
perform zf_build_grid_title.
&---Display alv grid.
perform zf_display_alv_grid.
else.
*If Table is not Populated ie Records Does not exist
message 'Record Does Not Exist' type 'S'.
endif.
*& Form zf_validate_sales_doc_no
text
--> p1 text
<-- p2 text
form zf_validate_sales_doc_no .
select single vbeln into wa_vbak-vbeln from vbak where vbeln in r_vbeln .
if sy-subrc <> 0.
message i101.
endif.
endform. " zf_validate_sales_doc_no
*& Form zf_validate_date
text
--> p1 text
<-- p2 text
form zf_validate_date .
if date is future
if r_erdat-low >= sy-datum.
message e102.
elseif r_erdat-high >= sy-datum.
message e103.
endif.
endform. " zf_validate_date
*& Form zf_populate_header
text
--> p1 text
<-- p2 text
form zf_populate_header .
select vbeln
kunnr
erdat
auart
netwr
waerk
vkorg
vtweg
spart
into table i_vbak from vbak where vbeln in r_vbeln.
if sy-subrc <> 0.
message 'RECORD DOES NOT EXIST' type 'E'.
endif.
sort i_vbak by vbeln.
*&--LOGIC TO GET FIELDS FROM TABLE KNA1 INTO INTERNAL TABLE I_VBAK
loop at i_vbak into wa_vbak.
select single name1 stras ort01 pstlz regio land1 telf1 into (wa_vbak-name1,
wa_vbak-stras,
wa_vbak-ort01,
wa_vbak-pstlz,
wa_vbak-regio,
wa_vbak-land1,
wa_vbak-telf1)
from kna1
where kunnr = wa_vbak-kunnr.
modifying it_header.
modify i_vbak from wa_vbak.
clear wa_vbak.
endloop.
endform. " zf_populate_header
*& Form zf_populate_detail
text
--> p1 text
<-- p2 text
form zf_populate_detail .
if i_vbak[] is not initial.
select vbeln
posnr
matnr
into table i_vbap from vbap
for all entries in i_vbak where vbeln = i_vbak-vbeln.
endif.
sort i_vbap by vbeln.
sort i_vbap by posnr.
*&--LOGIC TO GET FIELDS FROM TABLE MAKT INTO INTERNAL TABLE I_VBAP
loop at i_vbap into wa_vbap.
select single maktx into (wa_vbap-maktx)
from makt where matnr = wa_vbap-matnr and spras = sy-langu.
modifying it_header.
modify i_vbap from wa_vbap.
clear wa_vbap.
endloop.
endform. " zf_populate_detail
*& Form zf_append_sales_final
text
--> p1 text
<-- p2 text
form zf_append_sales_final .
sort i_vbak by vbeln.
sort i_vbap by vbeln posnr.
loop at i_vbak into wa_vbak.
move-corresponding wa_vbak to wa_sales_final.
read table i_vbap with key vbeln = wa_vbak-vbeln
binary search transporting no fields.
loop at i_vbap into wa_vbap from sy-tabix.
if wa_vbap-vbeln <> wa_vbak-vbeln.
exit.
endif.
move-corresponding wa_vbap to wa_sales_final.
append wa_sales_final to i_sales_final.
endloop.
endloop.
endform. " zf_append_sales_final
*& Form zf_build_fieldcat
text
-->P_I_FIELDCAT text
form zf_build_fieldcat using p_i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv. "local Workarea used
clear l_fieldcat.
FOR LIGHT IN COLUMN
clear l_fieldcat.
l_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
l_fieldcat-fieldname = 'V_LIGHTS'.
" FIELD FOR WHICH CATALOG ID FILLED.
*We are passing final internal table 'I_FINAL' to l_fieldcat(local
*variable
l_fieldcat-tabname = 'I_SALES_FINAL'.
" INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
l_fieldcat-just = 'C'. " FOR JUSTIFICATION.
l_fieldcat-outputlen = 20.
" TO DEFINE OUTPUT LENGTH OF THE COLUMN.
append l_fieldcat to p_i_fieldcat.
FIRST COLUMN ********************************
l_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
*l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'X'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document'. " long text for header.
l_fieldcat-seltext_m = 'Sales Doc'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Doc'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
**************************SECOND COLUMN ********************************
*l_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN
l_fieldcat-row_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'POSNR'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'x'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document Item'. " long text for header.
l_fieldcat-seltext_m = 'Sales Document Item'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Document Item'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
endform. " zf_build_fieldcat
*& Form zf_eventcat
text
-->P_I_EVENTCAT text
form zf_eventcat using p_i_eventcat type slis_t_event.
data: l_eventcat type slis_alv_event.
clear l_eventcat.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
TOP OF PAGE FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_top_of_page.
"(COMPONENT "NAME"of structure)
if sy-subrc = 0. "if success
move 'ZF_TOP_OF_PAGE' to l_eventcat-form.
"matches name and moves form to workarea and modifies table
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
PF_STATUS_SET FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_pf_status_set.
if sy-subrc = 0.
move 'ZF_PF_STATUS_SET' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
USER_COMMAND FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_user_command.
if sy-subrc = 0.
move 'ZF_USER_COMMAND' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
endform. " zf_eventcat
*& Form zf_sorting
text
-->P_I_SORTINFO text
form zf_sorting using p_i_sortinfo.
endform. " zf_sorting
*& Form zf_build_listheader
text
-->P_I_LISTHEADER text
form zf_build_listheader using p_i_listheader type slis_t_listheader.
data: l_listheader type slis_listheader.
refresh p_i_listheader.
clear l_listheader.
HEADER
l_listheader-typ = 'H'.
l_listheader-info = 'FUJITSU CONSULTING INDIA LTD.'.
append l_listheader to p_i_listheader.
SELECTION
l_listheader-typ = 'S'.
l_listheader-key = 'Date:'.
l_listheader-info = sy-datum.
append l_listheader to p_i_listheader.
ACTION
l_listheader-typ = 'A'.
*l_listheader-key =
l_listheader-info = 'SALES ORDER ALV REPORT By Rohan Malik'.
append l_listheader to p_i_listheader.
endform. " zf_build_listheader
*& Form zf_build_grid_title
text
--> p1 text
<-- p2 text
form zf_build_grid_title .
v_gridtitle = 'List of Purchase Order'.
endform. " zf_build_grid_title
*& Form zf_display_alv_grid
text
--> p1 text
<-- p2 text
form zf_display_alv_grid .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_grid_title = v_gridtitle
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_sales_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " zf_display_alv_grid
*& Form zf_top_of_page
text
--> p1 text
<-- p2 text
form zf_top_of_page .
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_listheader
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
endform. " zf_top_of_page
*& Form zf_user_command
text
--> p1 text
<-- p2 text
form zf_user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
case r_ucomm. "FCODE
when 'VA03'.
read table i_sales_final into wa_sales_final index rs_selfield-tabindex.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen .
message i102 with rs_selfield-value .
when '&IC1'. "for hotspot with VBELN, POSNR, MATNR, KUNNR.
if rs_selfield-fieldname = 'MATNR'.
set parameter id 'MAT' field rs_selfield-value.
call transaction 'MM03' and skip first screen.
return.
message i103 with rs_selfield-value .
endif.
if rs_selfield-fieldname = 'VBELN'.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen.
return.
message i104 with rs_selfield-value .
endif.
endcase.
endform. " zf_user_command
*& Form ZF_PF_STATUS_SET
text
--> p1 text
<-- p2 text
form zf_pf_status_set using rt_extab type slis_t_extab.
set pf-status 'Z11_RM_ALV_SO'.
endform. " ZF_PF_STATUS_SET
*& Form zf_layout
text
--> p1 text
<-- p2 text
form zf_layout .
wa_layout-zebra = 'X'.
wa_layout-lights_fieldname = 'V_LIGHTS'.
wa_layout-lights_tabname = 'I_SALES_FINAL'.
" 1, 2 or 3 for red, yellow and green respectively.
endform. " zf_layout
*& Form zf_modify_final
text
--> p1 text
<-- p2 text
form zf_modify_final .
CODE TO EXECUTE LIGHTS
*start of loop
loop at i_sales_final into wa_sales_final.
*giving conditions and modifying as we want to change many rows
if wa_sales_final-netwr <= 10000.
wa_sales_final-v_lights = '1'.
modify i_sales_final from wa_sales_final transporting v_lights.
elseif wa_sales_final-netwr > 10000 and wa_sales_final-netwr <= 100000.
wa_sales_final-v_lights = '2'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
else.
wa_sales_final-v_lights = '3'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
endif.
endloop.
reward point s if helpful
rohan malik -
Display Traffic Lights in ALV TREE
Hi,
I have to display traffic light in ALV tree but i am not able to find out what parameter i should pass like in ALV grid where we can set is_layout (BCALV_GRID_04).
Thanks in advance.
Regards,
HarshHi,
Please take a look at my code below. Hope it suits your requirement.
P.S. Please award points if it helps...
*& Report ZMM_R_PO_TO_IPURCH_XI
*& PROGRAM TYPE : Report
*& RICEF ID :
*& TITLE : ZMM_R_PO_TO_IPURCH_XI
*& SAP Module : MM
*& CREATION DATE : 02/06/2008
*& AUTHOR : Aris Hidalgo
*& DESIGNER : Aris Hidalgo
*& DESCRIPTION :
*$**********************************************************************
*$ CHANGE HISTORY
*$----------------------------------------------------------------------
*$ DATE | T-Num | Description | Reference
** | | |
*$**********************************************************************
REPORT zmm_r_po_to_ipurch_xi
NO STANDARD PAGE HEADING
MESSAGE-ID zmm.
* Data Dictionary Table/s *
TABLES: edidc.
* SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_credat FOR edidc-credat OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rb_sum RADIOBUTTON GROUP grp1,
rb_det RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
*/ CLASS DEFINITION/S /*
* CLASS lcl_data_def DEFINITION
CLASS lcl_data_def DEFINITION ABSTRACT.
PUBLIC SECTION.
TYPES: BEGIN OF t_edidc,
docnum TYPE edidc-docnum,
docrel TYPE edidc-docrel,
status TYPE edidc-status,
doctyp TYPE edidc-doctyp,
direct TYPE edidc-direct,
rcvpor TYPE edidc-rcvpor,
rcvprt TYPE edidc-rcvprt,
rcvprn TYPE edidc-rcvprn,
rcvsad TYPE edidc-rcvsad,
sndpor TYPE edidc-sndpor,
sndprt TYPE edidc-sndprt,
sndprn TYPE edidc-sndprn,
sndsad TYPE edidc-sndsad,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
mestyp TYPE edidc-mestyp,
idoctp TYPE edidc-idoctp,
END OF t_edidc.
TYPES: BEGIN OF t_output,
exception TYPE char1,
ebeln TYPE ekko-ebeln,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
END OF t_output.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
lifnr TYPE ekko-lifnr,
END OF t_ekko.
TYPES: BEGIN OF t_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF t_lfa1.
DATA: gt_edidc TYPE STANDARD TABLE OF t_edidc,
gt_output TYPE STANDARD TABLE OF t_output,
wa_output LIKE LINE OF gt_output,
gt_ekko TYPE HASHED TABLE OF t_ekko
WITH UNIQUE KEY ebeln,
gt_lfa1 TYPE HASHED TABLE OF t_lfa1
WITH UNIQUE KEY lifnr.
ENDCLASS. "lcl_data_def DEFINITION
CLASS lcl_alv_routines DEFINITION DEFERRED.
CLASS lcl_handle_events DEFINITION DEFERRED.
* CLASS lcl_get_data DEFINITION
CLASS lcl_get_data DEFINITION INHERITING FROM lcl_data_def.
PUBLIC SECTION.
METHODS: get_idocs,
read_idocs,
process_data
IMPORTING
im_docnum TYPE edidc-docnum.
PRIVATE SECTION.
CONSTANTS: lc_mestyp TYPE edidc-mestyp VALUE 'ZMARKETSITE_PURCHASE_ORDER',
lc_idoctp TYPE edidc-idoctp VALUE 'ZMARKETSITE_PURCHASE_ORDER01',
lc_segnam TYPE edid4-segnam VALUE 'ZMARKETSITE_ORDER_HEADER1'.
CONSTANTS: lc_red TYPE i VALUE 1,
lc_yellow TYPE i VALUE 2,
lc_green TYPE i VALUE 3.
DATA: lv_stat_message TYPE bdidocattr-message,
o_lcl_alv_routines TYPE REF TO lcl_alv_routines.
DATA: ls_idoc_control TYPE edidc,
lv_tot_data_recs TYPE sy-dbcnt, "#EC NEEDED
lv_tot_status_recs TYPE sy-dbcnt. "#EC NEEDED
DATA: lt_edids TYPE STANDARD TABLE OF edids,
lt_edidd TYPE STANDARD TABLE OF edidd.
ENDCLASS. "lcl_get_data DEFINITION
* CLASS lcl_alv_routines DEFINITION
CLASS lcl_alv_routines DEFINITION INHERITING FROM lcl_get_data.
PUBLIC SECTION.
DATA: lcl_table TYPE REF TO cl_salv_table,
lcl_container TYPE REF TO cl_gui_custom_container,
lcl_handle_events TYPE REF TO lcl_handle_events,
lcl_columns TYPE REF TO cl_salv_columns_table,
lcl_column TYPE REF TO cl_salv_column_table,
lcl_events2 TYPE REF TO cl_salv_events_table,
lcl_display_settings TYPE REF TO cl_salv_display_settings,
lcl_functions TYPE REF TO cl_salv_functions_list,
lcl_display TYPE REF TO cl_salv_display_settings,
lcl_aggregations TYPE REF TO cl_salv_aggregations,
lcl_sorts TYPE REF TO cl_salv_sorts,
lcl_content TYPE REF TO cl_salv_form_element,
lcl_header TYPE REF TO cl_salv_form_header_info,
ls_color TYPE lvc_s_colo.
DATA: lcl_grid TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_1 TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_2 TYPE REF TO cl_salv_form_layout_grid,
lcl_label TYPE REF TO cl_salv_form_label,"#EC NEEDED
lcl_text TYPE REF TO cl_salv_form_text,
gt_t247 TYPE STANDARD TABLE OF t247,
wa_t247 LIKE LINE OF gt_t247,
lv_text TYPE string.
METHODS: display_data
IMPORTING
im_output LIKE gt_output,
display_top_of_page.
PRIVATE SECTION.
DATA: lv_string TYPE string,
lv_date1 TYPE c LENGTH 10,
lv_time TYPE c LENGTH 10,
lv_title TYPE string.
ENDCLASS. "lcl_alv_routines DEFINITION
* CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
*/ IMPLEMENTATION/S /*
* CLASS lcl_get_data IMPLEMENTATION
CLASS lcl_get_data IMPLEMENTATION.
* METHOD get_idocs
METHOD get_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p01.
SELECT docnum docrel status doctyp
direct rcvpor rcvprt rcvprn
rcvsad sndpor sndprt sndprn
sndsad credat cretim mestyp
idoctp
FROM edidc
INTO TABLE gt_edidc
WHERE mestyp = lc_mestyp
AND idoctp = lc_idoctp
AND credat IN s_credat.
IF gt_edidc[] IS NOT INITIAL.
* Get IDOC details
CALL METHOD me->read_idocs.
ENDIF.
ENDMETHOD. "get_idocs
* METHOD read_idocs
METHOD read_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p02.
FIELD-SYMBOLS: <fs_edidc> LIKE LINE OF gt_edidc,
<fs_output> LIKE LINE OF gt_output,
<fs_ekko> LIKE LINE OF gt_ekko,
<fs_lfa1> LIKE LINE OF gt_lfa1.
LOOP AT gt_edidc ASSIGNING <fs_edidc>.
CLEAR ls_idoc_control.
REFRESH: lt_edids, lt_edidd.
* Get status text of IDOC
CALL FUNCTION 'IDOC_GET_MESSAGE_ATTRIBUTE'
EXPORTING
idoc_number = <fs_edidc>-docnum
IMPORTING
idoc_message = lv_stat_message.
* Get IDOC details
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
document_number = <fs_edidc>-docnum
IMPORTING
idoc_control = ls_idoc_control
number_of_data_records = lv_tot_data_recs
number_of_status_records = lv_tot_status_recs
TABLES
int_edids = lt_edids
int_edidd = lt_edidd
EXCEPTIONS
document_not_exist = 1
document_number_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Pass data to output table
CALL METHOD me->process_data
EXPORTING
im_docnum = <fs_edidc>-docnum.
ENDLOOP.
DELETE gt_output WHERE ebeln IS INITIAL.
IF gt_output[] IS NOT INITIAL.
* Get vendor for fetched POs
SELECT ebeln lifnr
FROM ekko
INTO TABLE gt_ekko
FOR ALL ENTRIES IN gt_output
WHERE ebeln = gt_output-ebeln.
IF gt_ekko[] IS NOT INITIAL.
* Get name of vendors
SELECT lifnr name1
FROM lfa1
INTO TABLE gt_lfa1
FOR ALL ENTRIES IN gt_ekko
WHERE lifnr = gt_ekko-lifnr.
ENDIF.
* Pass vendor details to output table
LOOP AT gt_output ASSIGNING <fs_output>.
READ TABLE gt_ekko ASSIGNING <fs_ekko>
WITH TABLE KEY ebeln = <fs_output>-ebeln.
IF sy-subrc = 0.
READ TABLE gt_lfa1 ASSIGNING <fs_lfa1>
WITH TABLE KEY lifnr = <fs_ekko>-lifnr.
IF sy-subrc = 0.
<fs_output>-lifnr = <fs_lfa1>-lifnr.
<fs_output>-name1 = <fs_lfa1>-name1.
ENDIF.
ENDIF.
ENDLOOP.
CREATE OBJECT o_lcl_alv_routines.
CALL METHOD o_lcl_alv_routines->display_data
EXPORTING
im_output = gt_output[].
ENDIF.
ENDMETHOD. "read_idocs
* METHOD process_data
METHOD process_data.
FIELD-SYMBOLS: <fs_edidd> LIKE LINE OF lt_edidd.
IF lv_stat_message CP 'ok' OR
lv_stat_message CP 'positive'.
wa_output-exception = lc_green.
ELSEIF lv_stat_message CP 'error' OR
lv_stat_message CP 'negative'.
wa_output-exception = lc_red.
ELSE.
wa_output-exception = lc_yellow.
ENDIF.
READ TABLE lt_edidd ASSIGNING <fs_edidd>
WITH KEY docnum = im_docnum
segnam = lc_segnam.
IF sy-subrc = 0.
wa_output-ebeln = <fs_edidd>-sdata+0(10).
ENDIF.
wa_output-credat = ls_idoc_control-credat.
wa_output-cretim = ls_idoc_control-cretim.
APPEND wa_output TO gt_output.
CLEAR wa_output.
ENDMETHOD. "process_data
ENDCLASS. "lcl_get_data IMPLEMENTATION
* CLASS lcl_alv_routines IMPLEMENTATION
CLASS lcl_alv_routines IMPLEMENTATION.
* METHOD display_data
METHOD display_data.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = 0
text = text-p03.
gt_output[] = im_output[].
TRY.
cl_salv_table=>factory(
EXPORTING
list_display = ''
IMPORTING
r_salv_table = lcl_table
CHANGING
t_table = gt_output ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
lcl_functions = lcl_table->get_functions( ).
* Set all standard ALV functions
lcl_functions->set_all( abap_true ).
lcl_columns = lcl_table->get_columns( ).
lcl_columns->set_optimize( '' ).
* Set display to striped pattern
lcl_display = lcl_table->get_display_settings( ).
lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Sort columns
TRY.
lcl_sorts = lcl_table->get_sorts( ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
lcl_sorts->set_group_active( ).
TRY.
lcl_sorts->add_sort(
columnname = 'EBELN'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
*/Set column names
TRY.
lcl_columns->set_exception_column( 'EXCEPTION' ).
CATCH cx_salv_data_error. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION' ).
lcl_column->set_short_text( text-h01 ).
lcl_column->set_medium_text( text-h01 ).
lcl_column->set_long_text( text-h01 ).
lcl_column->set_output_length( '6' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EBELN' ).
lcl_column->set_short_text( text-h02 ).
lcl_column->set_medium_text( text-h02 ).
lcl_column->set_long_text( text-h02 ).
lcl_column->set_output_length( '9' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'LIFNR' ).
* lcl_column->set_short_text( text-h03 ).
lcl_column->set_medium_text( text-h03 ).
lcl_column->set_long_text( text-h03 ).
lcl_column->set_output_length( '11' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'NAME1' ).
* lcl_column->set_short_text( text-h04 ).
* lcl_column->set_medium_text( text-h04 ).
lcl_column->set_long_text( text-h04 ).
lcl_column->set_output_length( '30' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CREDAT' ).
* lcl_column->set_short_text( text-h05 ).
* lcl_column->set_medium_text( text-h05 ).
lcl_column->set_long_text( text-h05 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CRETIM' ).
* lcl_column->set_short_text( text-h06 ).
* lcl_column->set_medium_text( text-h06 ).
lcl_column->set_long_text( text-h06 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*/Set aggregations
* TRY.
* lcl_aggregations = lcl_table->get_aggregations( ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
* TRY.
* lcl_aggregations->add_aggregation( '' ).
* CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
* ENDTRY.
*/Hide columns
* TRY.
* lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
* lcl_column->set_visible( if_salv_c_bool_sap=>false ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
*/Display top of page
CALL METHOD me->display_top_of_page.
lcl_table->set_top_of_list( lcl_content ).
*/Handle ALV events
lcl_events2 = lcl_table->get_event( ).
CREATE OBJECT lcl_handle_events.
SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
lcl_display_settings = lcl_table->get_display_settings( ).
lcl_table->display( ).
ENDMETHOD. "display_data
* METHOD display_top_of_page
METHOD display_top_of_page.
CREATE OBJECT lcl_grid.
lv_title = text-t01.
lcl_grid->create_header_information(
row = 1
column = 1
text = lv_title
tooltip = lv_title ).
lcl_grid->add_row( ).
lcl_grid_1 = lcl_grid->create_grid(
row = 3
column = 1 ).
CLEAR lv_string.
CONCATENATE: sy-datum+4(2) '/' sy-datum+6(2) '/' sy-datum+0(4)
INTO lv_date1.
CONCATENATE: text-t02 lv_date1
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 1
column = 1
text = lv_string
tooltip = lv_string ).
CLEAR lv_string.
CONCATENATE: sy-uzeit+0(2) ':' sy-uzeit+2(2) ':' sy-uzeit+4(2)
INTO lv_time.
CONCATENATE: text-t03 lv_time
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 2
column = 1
text = lv_string
tooltip = lv_string ).
lcl_content = lcl_grid.
ENDMETHOD. "display_top_of_page
ENDCLASS. "lcl_alv_routines IMPLEMENTATION
* CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
* METHOD on_link_click
METHOD on_link_click.
ENDMETHOD. "on_link_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
* START-OF-SELECTION *
START-OF-SELECTION.
DATA: o_lcl_get_data TYPE REF TO lcl_get_data.
CREATE OBJECT o_lcl_get_data.
CALL METHOD o_lcl_get_data->get_idocs. -
Hi experts,
I am using below code to generate the traffic lights but in column header i am getting one button i want to replace that as Traffic lights. how to do this can any body tell me
"Includes
INCLUDE <icon>.
INCLUDE <symbol>.
*& Declaration part
"Types
TYPES:
BEGIN OF t_lights,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
lights TYPE char4, "Variable is needs to be declared with length 4 char
END OF t_lights.
"Work Areas
DATA:
w_lights TYPE t_lights.
"Internal tables
DATA:
i_lights TYPE STANDARD TABLE OF t_lights.
ALV Declarations
Types Pools
TYPE-POOLS:
slis.
Types
TYPES:
t_fieldcat TYPE slis_fieldcat_alv,
t_events TYPE slis_alv_event,
t_layout TYPE slis_layout_alv.
Workareas
DATA:
w_fieldcat TYPE t_fieldcat,
w_events TYPE t_events,
w_layout TYPE t_layout.
Internal Tables
DATA:
i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
i_events TYPE STANDARD TABLE OF t_events.
*& start of selection
START-OF-SELECTION.
PERFORM get_data.
*& end-of-selection.
END-OF-SELECTION.
PERFORM build_fieldcatlog.
PERFORM build_layout.
PERFORM list_display.
*& Form get_data
FORM get_data .
SELECT matnr
werks
lgort
FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_lights
UP TO 10 ROWS.
IF i_lights[] IS INITIAL.
"Dummy data
DO 10 TIMES.
w_lights-matnr = sy-index.
w_lights-werks = sy-index + 1.
w_lights-lgort = sy-index + 2.
APPEND w_lights TO i_lights.
CLEAR w_lights.
ENDDO.
ENDIF.
"Just pass 1=red or 2=yellow or 3=green to lights fields
LOOP AT i_lights INTO w_lights .
IF sy-tabix BETWEEN 1 AND 3.
w_lights-lights = '1'.
ELSEIF sy-tabix BETWEEN 4 AND 7.
w_lights-lights = '2'.
ELSEIF sy-tabix BETWEEN 8 AND 10.
w_lights-lights = '3'.
ENDIF.
MODIFY i_lights FROM w_lights INDEX sy-tabix TRANSPORTING lights.
ENDLOOP.
ENDFORM. " get_data
*& Form build_fieldcatlog
FORM build_fieldcatlog .
CLEAR:w_fieldcat,i_fieldcat[].
w_fieldcat-fieldname = 'MATNR'.
w_fieldcat-seltext_m = 'MATNR'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'WERKS'.
w_fieldcat-seltext_m = 'WERKS'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'LGORT'.
w_fieldcat-seltext_m = 'LGORT'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcatlog
*& Form build_layout
FORM build_layout .
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
w_layout-lights_fieldname = 'LIGHTS'.
w_layout-lights_tabname = 'I_LIGHTS'.
ENDFORM. " build_layout
*& Form list_display
FORM list_display .
DATA:
l_program TYPE sy-repid.
l_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = l_program
is_layout = w_layout
it_fieldcat = i_fieldcat
TABLES
t_outtab = i_lights
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " list_display
Thanks,
TharanginiHi!
Try this code.I have removed the previous code where you specify Lights in layout.I specified the lights column in fieldcatalog as Icon and passed the icon value instead of the no.s which you specified earlier.
"Includes
INCLUDE <icon>.
INCLUDE <symbol>.
*& Declaration part
"Types
TYPES:
BEGIN OF t_lights,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
lights(4),
END OF t_lights.
"Work Areas
DATA:
w_lights TYPE t_lights.
"Internal tables
DATA:
i_lights TYPE STANDARD TABLE OF t_lights.
TYPE-POOLS:
slis.
TYPES:
t_fieldcat TYPE slis_fieldcat_alv,
t_events TYPE slis_alv_event,
t_layout TYPE slis_layout_alv.
DATA:
w_fieldcat TYPE t_fieldcat,
w_events TYPE t_events,
w_layout TYPE t_layout.
DATA:
i_fieldcat TYPE STANDARD TABLE OF t_fieldcat,
i_events TYPE STANDARD TABLE OF t_events.
*& start of selection
START-OF-SELECTION.
PERFORM get_data.
*& end-of-selection.
END-OF-SELECTION.
PERFORM build_fieldcatlog.
PERFORM build_layout.
PERFORM list_display.
*& Form get_data
FORM get_data .
SELECT matnr
werks
lgort
FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_lights
UP TO 10 ROWS.
IF i_lights[] IS INITIAL.
"Dummy data
DO 10 TIMES.
w_lights-matnr = sy-index.
w_lights-werks = sy-index + 1.
w_lights-lgort = sy-index + 2.
APPEND w_lights TO i_lights.
CLEAR w_lights.
ENDDO.
ENDIF.
"Just pass @0A@=red or @09@=yellow or @08@=green to lights fields
LOOP AT i_lights INTO w_lights .
IF sy-tabix BETWEEN 1 AND 3.
w_lights-lights = '@0A@'.
ELSEIF sy-tabix BETWEEN 4 AND 7.
w_lights-lights = '@09@'.
ELSEIF sy-tabix BETWEEN 8 AND 10.
w_lights-lights = '@08@'.
ENDIF.
MODIFY i_lights FROM w_lights INDEX sy-tabix TRANSPORTING lights.
ENDLOOP.
ENDFORM. " get_data
*& Form build_fieldcatlog
FORM build_fieldcatlog .
CLEAR:w_fieldcat,i_fieldcat[].
w_fieldcat-fieldname = 'MATNR'.
w_fieldcat-seltext_m = 'MATNR'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'WERKS'.
w_fieldcat-seltext_m = 'WERKS'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'LGORT'.
w_fieldcat-seltext_m = 'LGORT'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
w_fieldcat-fieldname = 'LIGHTS'.
w_fieldcat-icon = 'X'.
w_fieldcat-outputlen = 14.
w_fieldcat-seltext_l = 'Traffic Lights'.
w_fieldcat-seltext_s = 'Traffic Lights'.
w_fieldcat-seltext_m = 'Traffic Lights'.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcatlog
*& Form build_layout
FORM build_layout .
w_layout-colwidth_optimize = 'X'.
w_layout-zebra = 'X'.
ENDFORM. " build_layout
*& Form list_display
FORM list_display .
DATA:
l_program TYPE sy-repid.
l_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_program
is_layout = w_layout
it_fieldcat = i_fieldcat
TABLES
t_outtab = i_lights
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " list_display
Maybe you are looking for
-
How to connect 2 ethernet cables to 1 port? Help me please.
My computer has one ethernet port, but I need to be able to connect two ethernet cables to it. I am about to get satellite internet which requires an ethernet port and also about to sign up to a VoIP (Voice over IP) service which also requires an eth
-
When creating a new adf bc project the name for the project is wrong displayed, a "0" is added to the name. Model0 is displayed instead of Model or model depending on the location
-
Inclusion of 0recordmode in transfer rules
Dear All, I am pulling data from a Ztable through a data source (Delta) into BW from R/3.I am pulling delta data into ODS through infosource. I have made an ODS but while making update rules , it gives warning "0recordmode is not present in
-
Hi all, I'm developing HCP HTML5 applications based on UI5. While the RDE looks really great, I'd still like to use the good old Eclipse to launch my project locally. To do so, I've created an HTML5 application from the cockpit, generated a sample UI
-
Mountain Lion/Illustrator creating large PDF files
I have an iMac [Snow Leopard] that runs Adobe Illustrator, and also a Macbook Pro [Mid 2012, Mountain Lion] that also runs the software. Both are set up identically, but using the same image files, the iMac produces PDFs of about 1.6MB, whereas the M